Used three-way tipper trailers for sale (472)

Condition: used, maximum load weight: 9,100 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/1998, next inspection (TÜV): 03/2026, loading space length: 4,550 mm, loading space width: 2,320 mm, loading space height: 500 mm, loading space volume: 5 m³, ? 3-way tipper body ? Loading ramps ? Height-adjustable towing device ? Loading height: approx. 930 mm ? Drum brakes ? Leaf suspension Lodpfx Acjx Iy Ahjyehb ? Support legs All information subject to change / Interim sale reserved.

Condition: new, maximum load weight: 8,600 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles Lsdpev Dz N Aefx Acyjhb ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Draw Eye: * Height-adjustable by 300 mm, hot-dip galvanized drawbar with 40 mm flange draw eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting * 15-pin power connector ----General Fittings: * Galvanized steel toolbox, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two rear mechanical, hot-dip galvanized drop-down supports ----Tipping Body: * Net hooks on the sides and rear in the central locking bearings, as well as 3 additional hooks on the outer front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper structure * Continuous sidewalls without center stanchion, fold-down with drop-side spring lifts * Tailgate foldable and pendulum-type, manually central-locked * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear ramp guide rails for loading ramps ----Load Securing: * One foldable, recessed lashing ring (5 t) in each corner * Four foldable, recessed lashing rings (3 t each) integrated into the side outer frame ----Ramps: * 1 pair of aluminum access ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, recessed under the loading floor in the chassis, accessed from the rear ----Tires: * Tires 235/75 R 17.5 ----Paint: * Axles, springs, air tanks, drawbar, and landing gear painted black * Sideboard painted RAL 9010 pure white * Sidewalls can be painted in any RAL color upon request (additional cost) * Floor and front wall hot-dip galvanized ----Info: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Availability: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release unit for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox mounted on right-hand side * Two-step entry on front left in direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the sides and rear in the central locking bearings, plus 2 hooks on the front wall * Steel pallet 3-way tipper body (continuous sidewalls - no central stanchions - foldable with drop-side assist spring, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Rear track for loading ramps ----Load Securing: * One 5 t lashing point in each corner Lhsdpfxjq Euagj Acysb * Four 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (carrying capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at rear, mounted under the load bed within the chassis ----Tyres: * 385/55 R 19.5 ----Coating: * Hot-dip galvanized chassis, drawbar, tipper body, front wall, drop sides, folding supports and rear stanchions * Springs, air tanks, flange towing eye, and landing gear painted black * Drop sides hot-dip galvanized ----Info: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery Time: * Immediately available ex Egestorf

Condition: excellent (used), empty load weight: 4,800 kg, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2019, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Condition – Very well-maintained vehicle Category – Trailer Category 2 – Three-way tipper Model – MEILLER MZDA 18/23M – 18T – Tipper Registration month – 10 Registration year – 2019 Gross weight in kg – 18,000 Unladen weight in kg – 4,800 Payload in kg – 13,200 Number of axles – 2 Load compartment length in mm – 4,900 Load compartment width in mm – 2,380 Load compartment height in mm – 900 Lhsdpfxsx I Rm Ds Acyjb Tipper – Three-way tipper Other – Tarpaulin, 2 x air connection Commercial/Export – Net price in € – 22,990 Subject to changes, interim sale, and errors Phone +49 551 50 84 912

Condition: used, first registration: 02/2019, Year of construction: 2019, SCHWARZMÜLLER Z2 2-Axle TANDEM 3-Side Tipper Trailer Steel / Alu Alcoa 19,000 kg ● 2 x BPW EAC HD - 9 t axles ● Full air suspension ● ABS / EBS ● Lift / lower system ● Duomatic connection ● Aluminium tipping body ● Steel floor with lashing rings ● Split, side aluminium drop sides ● Rear flap made of steel ● Total vehicle length: 7,150 x 2,550 x 2,600 mm (LxWxH) ● Internal body dimensions: 5,120 x 2,450 x 1,000 mm (LxWxH) ● Volume: 13 m³ ● Sliding tarpaulin ● Access platform ● Tyres: 385/65 R 22.5 ● ALCOA Durabright rims ● Good tread! ● Unladen weight: 4,100 kg ● Gross weight: 19,000 kg - German-registered vehicle! - MOT / TÜV: NEW! Lhedpfx Asx Nc Ebocyeb Errors and prior sale excepted! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 08/2020, Equipment: ABS, Vehicle identification number: WKY2T0118LM039671 Unladen weight: 4,660 kg German roadworthiness inspection (HU) valid until 10/2026 – safety inspection (SP) until 04/2026 SAF axles with disc brakes Air suspension Internal dimensions: 4,820 x 2,425 x 1,090 mm Sliding tarp Adjustable underrun protection Tyres: 385/65 R 22.5 Subject to alterations, prior sale, and errors. The description serves for the general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The specification in the purchase contract is decisive. Lodjx Nk E Aspfx Acyehb Our offer generally does not include new TÜV certification. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: new, maximum load weight: 13,830 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 9-ton Gigant axles ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – without truck-side installation * 15-pin power connector * LED lighting with galvanized protective cover ----Flange Towing Eye / Drawbar: * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) ----General Attachments: * Front landing gear * Foldable galvanized steel underrun protection for paver feeding * Enclosed individual plastic mudguards * Front wall platform made of grating with access step at the drawbar and handrails on the front wall ----Chassis: * Chassis made of high-tensile fine-grained steel ----Tipping Body: * Steel 3-way tipper body with aluminum side walls, asymmetrical – continuous without central stanchion – swinging via manual central locking, left side fold-down with drop-side spring lifter * Rear wall – made of HBW 400 steel – swinging via automatic double claw lock * 5 mm steel floor plate made of HBW 450 steel ----Load Securing: * 4 x 3-ton lashing rings per side – recessed and foldable – integrated in the steel floor ----Roll Tarp: * Roll tarp – agate grey, similar to RAL 7038 Lsdsx Ipbyspfx Acyohb * Tarp tensioning using side tensioning ratchets and rubber tensioners at front and rear ----Painting: * Chassis, underrun protection and drawbar hot-dip galvanized * Axles, air tanks, landing gear, and flange towing eye painted in black * Body painted in RAL 9010 pure white ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 tons * New vehicle without initial registration, with manufacturer’s warranty * Errors and interim sale excepted * Sample photos (Actual vehicle images may differ due to special equipment) ----Delivery time: * Vehicle available from calendar week 16/2026

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye Ledpfxoxf Skvo Acyshb ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 'Masterline' ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Lhedpfxsl Thyxe Acyjb ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * Two mechanical, hot-dip galvanized rear folding support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * RDÜ tire pressure monitoring system ----Tipper Body: * Net hooks on sides and rear in the central locking bearings as well as 2 on the front wall * Steel pallet 3-way tipper body (continuous side walls, without center posts), foldable with drop side spring assistors * Rear corner posts bolted * Combination rear steel swing doors, double-leaf, asymmetrically split, can be swung and locked at 270° (not foldable), plus additional swinging frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock and central locking system * Deactivation function for the automatic tailgate feature when reversing with an open swing door * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes in the outer frame on each side ----Ramps: * 1 pair aluminum drive-on ramps, approx. 3,310 x 400 mm (capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, mounted under the load area, integrated into the chassis ----Painting: * Drawbar, front wall, tipper body, rear posts, underrun protection, and mechanical support legs, hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall paint finish in a RAL color of your choice available at extra cost * Axles, springs, flange towing eye, air tank, and landing leg painted in black ----Additional Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 13,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal (without truck-side installation) * 2 x 9 t Gigant axles * Air suspension with leveling during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Standing platform at the front wall * Manual sliding tarpaulin * 15-pin power plug * LED tail lights with galvanized protective cover * Chassis made of fine-grain steel * Steel 3-way tipper body (side walls with MM-profile – continuous, without central stanchion – swingable via manual central locking and left side folding panel with sidewall spring lifter) * Rolling tarpaulin similar to RAL 7038 agate grey with tensioning by side tension ratchets and tension cords at front and rear * Front wall platform made of grating with step at the drawbar and one handrail at the front wall * Rear wall – made of HBW 400 steel – swingable via automatic 2-claw locking * 5 mm steel floor made from HBW 450 steel * Four 3 t recessed and foldable lashing rings per side – embedded in the steel floor Lsdjxl Nkgjpfx Acyshb * Reinforced and certified superstructure as per EN 12642 XL including load securing certificate up to 19 t * Tipper body and side walls in RAL 9010 pure white * Painting of side panels in RAL 9010 pure white * Painting of side panels in a RAL color of choice available at extra cost * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Available from KW 11/2026 * Sample images (pictures of the vehicle may vary due to special equipment)

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, Year of construction: 2024, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem three-way tipper with ramp shaft, Typ. HTK 105024 Basic INCLUDING THROUGH-LOADING VERSION INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDING HOT-DIP GALVANIZED TIPPER BODY & DROP SIDES including lockable ramp shaft with cover (privacy screen) TOP! As an option, we can offer you ALU docking ramps with our PATENTED LOCKING SYSTEM with a safety claw under the ramps. The locking mechanism is operated from the side, the claw engages in the standard rear carrier at the bottom, thus securing the ramp quickly and easily. Simple & quick handling No loose parts, e.g. with locking pins (risk of loss) No holes required in the rear carrier / floor panel Features: Permissible total weight 11,900 kg Payload approx. 8,750 kg Loading area approx. 5,030 x 2,420 mm Unloaded loading height approx. 990 mm Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,500 mm Bridge floor made of 4 mm fine-grained steel Finishing of the tipper body and drop sides through complete hot-dip galvanizing Laser-welded quality steel drop sides, 500 mm high Drop sides can be folded down at the side and rear, removable and swinging with central locking; galvanized plug-in & quickly removable rear stanchions Dropside lifting springs on the side drop sides Solid front wall made of galvanized steel, can be folded forward (through-loading system) Drawbar continuously height-adjustable for coupling heights unbel. approx. 660 - 900 mm Lhedpfx Acjtiwulsyeb DIN screw drawbar eye Ø 40 mm Reinforced 12 t geared support winch with load and fast gear 10 pieces 3 to lashing rings countersunk Tilt angle side / rear: 45 ° / 48 ° 2 telescopic folding supports at the rear of the vehicle Lockable storage shaft with plastic rollers for 2 optional ALU drive-on ramps integrated in the frame 2-circuit air brake system with ALB function ABS braking system 24 volt Spindle parking brake Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; Mudguards with splash guard system Hot-dip galvanized chassis frame with drawbar 235/75 R17.5 tires Maintenance-free parabolic suspension with load compensation Electrical system: 15-pin 24 volt Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: Optimum corrosion protection for the entire trailer thanks to hot-dip galvanizing in an immersion bath Through-loading system with fold-down bulkhead Safe loading and unloading thanks to telescopic folding supports at the rear Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps Ideal load securing options thanks to standard lashing options The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles Low tare weight => therefore high payload Optionally we offer you for an extra charge: 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) Plastic toolbox mounted under the loading area *Stock vehicle - available immediately *Subject to prior sale *Price ex works - Gersthofen

Condition: new, maximum load weight: 9,210 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,070 mm, loading space width: 2,420 mm, loading space height: 450 mm, tire size: 235/75 R17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem three-way tipper, Typ. HTK 105024 DL --- --- INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDING HOT-DIP GALVANIZED TIPPER BODY & DROP SIDES --- Lhsdpfxskn N Sbs Acyjb --- TOP! As an option, we can offer you ALU docking ramps with our PATENTED LOCKING SYSTEM with a safety claw under the ramps. The locking mechanism is operated from the side, the claw engages in the standard rear carrier at the bottom, thus securing the ramp quickly and easily. * Simple & quick handling * No loose parts as with pin locks (risk of loss) * No need to drill holes in the rear carrier / floor panel --- --- Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,210 kg * Loading area approx. 5,070 x 2,420 mm * Loading height unloaded approx. 950 mm * Overall dimensions: LxWxH approx. 7,020 x 2,550 x 1,420 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides through complete hot-dip galvanizing * Laser-welded quality steel drop sides, 450 mm high * Side and rear drop sides can be folded down, removable and bolted to swing with central locking system * Galvanized and bolted rear stanchions * Side wall lifting springs on the side walls * Solid front wall made of galvanized steel * Drawbar with friction-locked height adjustment for coupling heights of approx. 660 - 890 mm * DIN screw drawbar eye Ø 40 mm * Reinforced 12 t gear support winch with load and fast gear * 8 pieces 3 tons lashing rings countersunk * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-sided tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection for the entire trailer thanks to hot-dip galvanizing * Rear wall with automatic unlocking when tipping backwards * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Ideal load securing options thanks to standard lashing options * The friction-locked height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) * Plastic toolbox mounted under the loading area * Lockable ramp shaft with cover (privacy screen) ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: used, maximum load weight: 18,390 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 07/1998, next inspection (TÜV): 12/2026, loading space length: 6,500 mm, loading space width: 2,500 mm, loading space height: 800 mm, total width: 2,500 mm, total height: 2,500 mm, Schröder Wiesmoor A24K3 Three-way Tipper * Three-way tipper * Truck trailer * Tipping trailer * Turntable axle * 3 axles * Air suspension * First registration: 07.07.1998 * Next inspection: 12/2026 * Gross vehicle weight: 24,000 kg * Unladen weight: 5,610 kg * Payload: 18,390 kg * Overall dimensions: 8,650 mm x 2,500 mm x 2,500 mm * Internal dimensions: 6,500 mm x 2,500 mm x 800 mm * Steel floor * Folding steel side walls (stakes also fully removable) Lodpox Ibl Rsfx Acyshb * Central locking * Fixed front wall * Air brakes * Hydraulic tipping function * Tyres: 386/65R22.5 156J * Tyres as new * Reversing lights * Warning panel IMPORTANT!!! PLEASE READ!!! We explicitly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend viewing and inspection, so that buyers have a clear understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images may be similar, may contain optional equipment subject to extra charge. Internal dimensions are approximate. Errors and typographical mistakes excepted, all information without guarantee! TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Condition: used, maximum load weight: 8,840 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2018, next inspection (TÜV): 01/2027, loading space length: 5,000 mm, loading space width: 2,400 mm, loading space height: 490 mm, total width: 2,550 mm, total height: 1,550 mm, Müller Mitteltal KA-TA-R 11.9t * Tandem three-way tipper trailer * Tipper Ljdpfx Asx Ibl Docyehb * Truck trailer * First owner * First registration: 25.10.2018 * Next inspection (TÜV): 01/2027 * Gross weight: 11,900 kg * Unladen weight: 3,060 kg * Payload: 8,840 kg * Overall dimensions: 7,150 mm x 2,550 mm x 1,550 mm * Internal dimensions: 5,000 mm x 2,400 mm x 490 mm * Continuously adjustable drawbar eye height * All supply lines to the towing vehicle protected inside hot-dip galvanized drawbar * Chassis hot-dip galvanized * Sideboards laser-welded from fine-grained steel * Fixed front wall made from smooth sheet metal * Side walls reinforced at the top with internal tubes and spring-assisted lifting * Side and rear walls can swing, fold down, and be removed (central locking system) * Brakes according to EC Directive 71/320/EEC ff with ABS 2S/2M and spring-applied parking brake * Leaf spring suspension * Plank compartment * Hydraulic three-way tipping system * Recessed lashing points in the platform floor * Supports * Support foot * Tyres: 235/75R17.5 143 J * Sideboard spring ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to prior sale, as this item is also advertised on other platforms. We strongly recommend viewing and inspection to ensure there are no misunderstandings regarding condition and suitability. Viewings and inspections are welcome and possible at any time by appointment! Images are similar and may include optional extras at additional cost. The stated internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * Air suspension with lift and lower system, including RtR valve and manual lower function for loading operations * Towing bar with positive-locking height adjustment and 50 mm flange towing eye * Landing gear at the front * Externally mounted folding supports at the rear * Plastic toolbox, approximately 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards * 15-pin, 24 V connector * LED tail lights 12 / 24 V mounted in underrun protection * Steel pallet-style 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth sheet metal * Hardwood protection pad for excavator bucket mounted on the front wall * Continuous, fold-down side walls without central stanchion, with drop-side spring assist and swinging via manual central locking Lhedovin Ucepfx Acysb * Rear stanchions bolted * Combination steel wing doors – asymmetrically split 2-leaf rear wall, can swing and lock to 270°, non-folding, with additional swinging frame for automatic tailgate opening during tipping operations, locking via galvanized rotary bolt lock and central locking; deactivation function for automatic tailgate opening when tipping backwards with open wing doors * Each corner equipped with 1 x 7 t lashing ring, plus 4 x 3 t lashing eyes set into the outer frame on each side * 4 mm steel floor plate * Two-stage step at front left * Rear mounting rail for approach ramps * Approach ramp storage compartment integrated into rear chassis * 1 pair of aluminum approach ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles * --Load securing certificate according to EN 12642 XL? * Chassis, towing bar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports – hot-dip galvanized * Side walls KTL-coated and tailgate painted RAL 9010 pure white * Optional painting of side walls to a specific RAL color available at extra cost * Axles, air tanks, flange towing eye, front landing gear painted in a shade of black * Errors and prior sale excepted * Available from CW 15 / 2026 * Sample images (pictures of the vehicle may vary due to special equipment)

Condition: used, maximum load weight: 930 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2023, loading space length: 3,240 mm, loading space width: 1,720 mm, loading space height: 350 mm, * 2 aluminium ramps 2,560 x 280 mm * Load capacity with axle spacing of 1m = 2,600 kg and at 1.5m = 2,850 kg * Storage compartment for ramps * Electric pump with emergency hand pump * Battery charging cable Lhodpfsx I Tyyex Acyob * Rear parking supports * Aluminium floor * 350 mm foldable aluminium side panels * Recessed tie rings on the sides * Rear door pendulum-type or foldable

Condition: new, empty load weight: 630 kg, maximum load weight: 2,070 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,690 mm, loading space width: 1,550 mm, loading space height: 330 mm, suspension: other, tire size: 195/70 r13 auf 5 lochfelgen, color: silver, Equipment: uploader, Huge selection of immediately available 3 - sided tippers at bargain prices!!! Secure price advantage now - come - buy - "take away" Technical data: Permissible total weight 2700 kg Payload 2030 kg Unladen weight 670 kg Load compartment length 269 cm Load compartment width 155 cm Load compartment height 33 cm Body and equipment: Lhjdpfx Aopgqadocysb WM Meyer - commercial frame Sturdy steel floor in one piece without wooden layer with solid steel longitudinal and cross beams, tiltable on 3 sides, welded tipper body Rail for attaching drive-on rails Hand pump on the drawbar for manual hydraulic tipping 4-stage tipping cylinder with high ground clearance Frame with long V-drawbar 25 mm thick anodized aluminium drop sides with pendulum flap at the rear 4 sides foldable and removable V-drawbar with overrun brake and automatic reverse drive Braked tandem axle Galvanized maintenance-free rubber spring axles Reinforced heavy-duty jockey wheel with 60 mm tube 13-pin plug 6 lashing brackets with reversing light Rear wall hinged at the rear Light strip and protected mounted multi-chamber lights 2 chocks plus pre-freight & FZ documents Illustrations show part. Optional accessories!!! Optional accessories available at extra cost: - 100 km/h version incl. wheel shock absorber set - Rear support set - Steel grid extension approx. 59 cm - Aluminum board elevation approx. 33 cm Further sizes and approx. 350 other models are available in our showroom Viewing possible at our exhibition site in the Bernhards district of Fulda, just 1 km from the A7 motorway between Kassel and Würzburg, directly on the B27 --- Sunday is show day! --- ---Have a look too! Buying a trailer is a matter of trust? therefore from a professional! Strong brands - strong service - trust in our experience! Financing, trade-in and transfer possible We would be happy to advise you personally - by telephone Despite the greatest care, typing errors, mistakes and prior sale are not excluded

Condition: used, maximum load weight: 13,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2011, Carnehl 3-way tipper Dimensions: 5000 mm x 2420 mm x 900 mm, steel side walls Ledpfox I U D Tjx Acyjhb Left side pendulum and foldable Foldable underrun protection SAF axles Air suspension

Condition: new, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring-actuated cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axle: Ledpfx Acjwhhw Hoyshb * 1st axle liftable * 2 x 9 t SAF axles ----Suspension: * Air suspension with automatic rapid lowering during tipping operation to increase stability (can be deactivated for paver) ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * 5-chamber tail lights with protective cover ----Drawbar / Flange drawbar eye: * Y-drawbar with 50 mm flange drawbar eye, height adjustable via head plate ----General attachments: * Aluminum air tank * Welded box section drawbar * Jost landing gear at front * Rear underrun protection * Enclosed single plastic mudguards ----Tipper body: * Side walls with robust continuous, inwardly sloped top rails * Continuous side panels – without central stanchion – * Right side panel swinging via manual central locking – pre-installed mounting points for long lever and hinges for drop-side conversion – * Rear tailgate swinging with automatic cam lock and 150 mm rear chute * Manual dosing system via chain * Hydraulically folding left side wall (Bordmatic) ----Thickness of floor, side walls, front and rear wall: * 3-way tipper body made of steel with M-Jet side boards * Front wall made of 3 mm STEELECT 240 steel * Side walls and tailgate made of 4 mm STEELECT steel (HBW 400) * 5 mm floor made of STEELECT steel (HBW 450) ----Tarpaulin: * Electric sliding tarpaulin (RAL 9006) operated via remote control or manual switch on the trailer * 600 mm front roof at the front wall as tarpaulin support for the sliding tarpaulin ----Paintwork: * Chassis painted in RAL 7021 black grey * Sideboard paintwork in RAL 9006 white aluminum ----General information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, Brake system: * Wabco TEBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axle: * 2 x 9 t BPW axles ----Suspension: * Air suspension, automatic rapid lowering during tipping process to increase stability (can be deactivated for paver operation) ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power plug * 5-chamber rear lights with protective cover ----Drawbar / Coupling eye: * Y-drawbar with height-adjustable 50 mm flange coupling eye, adjustable via top plate ----General attachments: * Aluminum air tanks * Welded box-section drawbar * Jost landing gear at the front * Rear underrun protection * Enclosed plastic single mudguards * Access ladder front left, mounted on the front wall ----Tipping body: * Steel 3-way tipper body with M-Jet sideboards * Sidewalls with robust continuous top rail, sloped inward * Continuous sidewalls – without central stanchion * Right sidewall pendulum-mounted via manual central locking — prepared for long handle and hinges for fold-down sidewall * Left sidewall pendulum-mounted via manual central locking and foldable with sideboard spring assistor * Tailgate pendulum-mounted with automatic cam lock and 150 mm rear chute * Manual dosing device via chain ----Thickness of floor, sidewalls, front, and tailgate: * Front wall made of 3 mm STEELECT 240 steel * Sidewalls and tailgate made of 4 mm STEELECT steel (HBW 400) Lhjdpfx Aewhhv Aocyjb * 5 mm tipper floor made of STEELECT steel (HBW 450) ----Tarpaulin: * Rolling tarpaulin (RAL 9006) with side crank at the rear and guide rail on the front wall ----Paintwork: * Chassis painted in RAL 7021 black grey * Sideboards painted in RAL 9006 white aluminum ----General information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 13,340 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic brake system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and sealed brake drums ----Axle: * 1st axle liftable * 2 x 9 t BPW axles ----Suspension: * Air suspension with automatic rapid lowering during tipping process to increase stability (can be deactivated for pavers) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin electrical connector * 5-chamber tail lights with protective cover ----Drawbar / Flange eye: * Cranked central tube drawbar with height-adjustable 50 mm flange drawbar eye (tipping over the drawbar possible, but with restricted tipping angle and depending on the towing vehicle) ----General attachments: * Aluminum air tank * Welded box-type steering linkage * Jost landing gear front * Rear underrun protection * Closed plastic single mudguards * Access ladder front left, outside on the bulkhead Lsdpfx Ajxlmi Tscyshb ----Tipping body: * Steel 3-way tipper body for pallets with M-Jet drop sides * Sidewalls with robust continuous top rail inclined inward * Continuous sidewalls - without center stanchion - * Right sidewall swinging via manual central locking - prepared for long lever and hinges for fold-down sidewall * Left sidewall swinging via manual central locking and foldable with drop-side spring assist * Tailgate swinging with automatic cam lock and 150 mm rear chute * Manual dosing system with chain ----Floor, sidewalls, front and rear wall thickness: * 5 mm tipper floor made of STEELECT steel (HBW 450 steel) * Sidewalls and tailgate made of 4 mm STEELECT steel (HBW 450 steel) * Front wall made of 3 mm STEELECT 240 steel ----Load securing: * 5 tie-down rings each side on the top rail, plus 5 tie-down rings per side in the floor ----Painting: * Chassis painted in RAL 7021 black grey * Drop side panels painted in RAL 9006 white aluminum ----General information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time * Available immediately ex Egestorf

Condition: new, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, Brake system: * Wabco TEBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axle: * 2 x 9 t BPW axles ----Suspension: * Air suspension with automatic rapid lowering during tipping process to increase stability (deactivatable for paver operation) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * 5-chamber tail lights with protective cover ----Drawbar / Flange eye: * Cranked central tube drawbar with height-adjustable 50 mm flange drawbar eye (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit) ----General attachments: Lhodjwhhv Nspfx Acyjb * Aluminium air tank, welded box-section drag link * BPW landing gear at the front * Rear underrun protection * Closed single plastic mudguards ----Tipper body: * Steel 3-way tipper body with M-Jet drop sides * Continuous side walls - without center stanchion - * Right side wall swinging with manual central locking -prepped for long lever and hinges for folding side wall- * Hydraulically folding left side wall (sideboard mechanism) * Rear flap swinging with automatic cam lock and 150 mm rear chute * Manual dosing device with chain ----Thickness of floor, side walls, front and rear wall: * Front wall made of 3 mm STEELECT 240 steel * Side walls with durable, continuously inwards-sloped top rail * Side walls and rear flap made of 4 mm STEELECT steel (HBW 400) * 5 mm platform floor made of STEELECT steel (HBW 450) ----Paintwork: * Chassis painted RAL 7021 black grey * Drop sides painted RAL 9006 white aluminium ----General information: * Superstructure in accordance with EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex Egesorf at the A7

Condition: new, machine/vehicle number: NEW-4, empty load weight: 796 kg, maximum load weight: 2,704 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, SPECIAL HOLIDAY PROMOTION: up to 15% discount on accessories such as mesh side panels, electric tipping control, and integrated ramps. New series! Three-way tipper, high loader with tandem axle, hot-dip galvanized steel frame, aluminium drop-sides foldable and removable on all sides, wooden floor with steel sheet cover, electric control, battery, lashing rings integrated as standard on the floor side in a V-groove, 13-pin electrical system, automatic jockey wheel, low chassis height. Plus freight to Gera and vehicle documents €250 net. Optional accessories available at extra cost: mesh side panels, loading ramps, 100 km/h equipment, tarpaulin and frame, etc. Lhedpfjghpc Tex Acyob Financing/leasing available. Images are examples, some with optional accessories available at additional cost!

Condition: used, axle configuration: 2 axles, first registration: 09/1991, Year of construction: 1991, Equipment: ABS, = Additional options and accessories = - EBS = More information = Lhodpfxsxt R A To Acyjb Empty weight: 4.000 kg Carrying capacity: 14.000 kg GVW: 18.000 kg Selling price: € 5.500, US$ 6.399

Condition: used, axle configuration: 2 axles, first registration: 11/2001, color: orange, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 5.270 kg Carrying capacity: 12.730 kg GVW: 18.000 kg Selling price: € 7.500, US$ 8.726 Ljdpfx Aex Hrqbscyjhb