Used Hapert Three-Way Tipper Trailers for sale (188)

Condition: new, maximum load weight: 2,174 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, Welcome to Gethöffer Nutzfahrzeuge -- Commercial Vehicle Expertise since 1984 -- We are an official ISUZU main dealer and the top address when it comes to D-Max models designed and converted specifically to suit your needs! Additionally, we are the developers and manufacturers of the extended wheelbase variant – the BIG-MAX – Our portfolio is complemented by the robust Hapert quality trailers for professionals. Your Choice with Us: We always keep at least 20 ISUZU D-Max pickups in various cab, equipment, and body configurations, as well as 20 Hapert trailers from all four series (flatbed, tipper, box, and transporter) in stock at our premises. Gtsdpfx Ahjx T N D Esvot We are happy to show you the vehicles and advise you regarding differences, technical details, and upgrade options. Visit us in 25436 Uetersen, about 30 km northwest of Hamburg. ---- The following information refers to the vehicle offered in this listing: Hapert Cobalt HM-3 405 x 220, 3,500 kg, available for immediate delivery! Accessories: This vehicle is offered in the manufacturer’s standard configuration. Special Accessories: * Emergency hand pump * Battery charger * HAPERT Remote control * 40 cm high aluminium side panels * Rear light guards * Dual pivoting rear board (top and bottom) * Mounting bracket for ramps under the floor Optional Accessories (at extra cost): * Loading package incl. approx. 250 cm aluminium ramps, integrated under the floor * 70 cm high swinging aluminium extension side panels * Removable aluminium extension side panels, 30 or 40 cm high * Removable 70 cm high mesh extension * LED lighting Standard Features: * Parabolic suspension incl. wheel shock absorbers * Lashing rings (1,000 daN capacity) integrated in the floor, TÜV certified * HAPERT hinges for securing the load net * Hydraulic cylinder with electric control * Reinforced chassis * Welded and fully hot-dip galvanized chassis * Numerous robust cross-members for high point load capacity * Additional continuous longitudinal beams, fully welded * 13-pin plug * Foldable jockey wheel * Very robust bolted V-drawbar Please contact us for a tailored and needs-based offer. ---- The following information applies to all our listings for the Hapert Cobalt transporter and is identical in content: This powerful three-way tipper, with dimensions of 400 x 200 cm, is the largest tipper in the HAPERT Cobalt segment. You can use this three-way tipper daily for transporting bulk materials, and it is also ideally suited for carrying your excavator or other machinery due to its robust build. Its ability to tip on three sides makes it especially suitable for use in confined spaces. HM-3, three-way tipper, tri-axle Permissible total weight: 3,500 kg Available dimensions in cm: 405 x 200 Parabolic suspension For more information, we recommend the following links: Warranty: * 10 years: on the chassis * 2 years: on original Hapert spare parts and accessories * 1 year: on all other retrofits and superstructures The above warranty periods are valid from initial commissioning! On demonstration or used vehicles, these periods are reduced accordingly. Compliance with the relevant manufacturer's warranty conditions is required. Warranty and guarantee claims are only valid upon presentation of suitable documentation.

Condition: new, empty load weight: 820 kg, maximum load weight: 1,880 kg, overall weight: 2,700 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50R13C, 3-S tipper from trailer manufacturer HAPERT model COBALT HM-2 2700kg 305x180x30. In our opinion, Cobalt tippers from Hapert are extremely stable, very well equipped and also have a fair price. The high loader car trailer is designed for durability. High-quality equipment comes as standard with this three-way tipper. Godjrz Rnzspfx Ahvjtt The extensive standard equipment of the tipper trailer at a glance. It has an extremely sturdy hot-dip galvanized steel frame, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with a load capacity of 1000 kg, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. Technical data can be found below. We offer useful accessories for Hapert three-way tipping trailers. Here you will find an inexpensive grid attachment, side wall attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100 km/h approval, tool box, lashing straps and lock.

Condition: new, empty load weight: 900 kg, maximum load weight: 3,500 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: other, construction height: 1,020 mm, working width: 1,860 mm, Manufacturer: Hapert Type: Cobalt 3-sided tipper HM-2 Perm. total weight: 3500 kg Payload: 2600 kg Empty weight: 900 kg Box dimensions: 3350 x 1800 x 300 mm Tires: 195/50 R13C Loading height: 690 mm with electro-hydraulics with emergency hand pump incl. Drive-on package : 2 integrated aluminium drive-on rails, 2 crank supports 3-sided tipper - Chassis completely welded and fully galvanized - Low chassis with 195/50 R13 tyres - Solid hydraulic cylinder with electrically operated pump - Heavy-duty folding support wheel - Galvanized sheet steel on multiplex floor plate - TÜV-approved load securing system - Designed side wall hinges for easy attachment of the cargo net - 4 removable corner stanchions - Aluminium walls, 30 cm high, with robust recessed locks Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints. Hydraulic cylinder with electrically operated pump, automatic reverse drive, rubber spring axle, independent wheel suspension, drive-on ramp, tiltable loading area, heavy-duty folding support wheel, marker lights, galvanized sheet steel on multiplex floor plate, overrun brake, incl. warranty, fully welded chassis, chassis with integrated brake system. Guarantee, Chassis completely welded and fully galvanized, Low chassis with 195/50 R13 tyres, TÜV-approved load securing system, Designed side wall hinges for easy attachment of the cargo net, 4 removable corner stanchions, Aluminium walls, 30 cm high, with robust recessed locks Gjdpfxetmfh Aj Ahvett

Condition: used, maximum load weight: 2,560 kg, overall weight: 3,500 kg, tire size: 195/50 r13, Top price, in the usual Hapert quality! Gtedpfjqw Alksx Ahvet 10 years chassis warranty ! *AVAILABLE IMMEDIATELY Model: HAPERT - Cobalt HM-2 With emergency hand pump Gross loading capacity: 3500 kg Payload: 2600 kg Dimensions L x W: 335 x 180 cm ✓ Chassis completely welded and fully bath-galvanized ✓ Low chassis with 195/50 R13 tires ✓ Solid hydraulic cylinder with electrically operated pump ✓ Heavy-duty folding support wheel ✓ Galvanized sheet steel ✓ TÜV-certified load securing system ✓ Designed dropside hinges for easy attachment of the cargo net ✓ 4 removable corner stanchions ✓ Aluminum walls, 30 cm high, with robust recessed locks If you are offered the same trailer at a lower price, please present this to us !!! If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, machine/vehicle number: hapert Cobalt HM-2 3,05x1,80m 2700kg Dreiseitenkipper Handpumpe niedriges Fahrwerk, empty load weight: 824 kg, maximum load weight: 1,876 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, Hydraulics (tipping and lowering system) - Three-way tipper - Tipping angle 51 degrees rear, 45 degrees sideways - Powerful OMFB pump, centrally mounted and protected - Double-stroke pump system - 4-stage hydraulic cylinder Dropside, railing and co. - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and five at the sides - Double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Gjdpjh Ewxmjfx Ahvott Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: H-DK40.20.350 tridem+, empty load weight: 1,400 kg, maximum load weight: 2,100 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, available immediately * available immediately * available immediately * available immediately arrive – view – pay – take away ! Images similar, shown with optional equipment ! Top of the line – nothing more comes after this!!! Premium Tridem Three-Way Tipper. Zimmerman – Exclusive with side wall extension with underfloor loading ramp system with heavy-duty crank/folding supports with a special 800 kg jockey wheel Featuring a chassis that is second to none. Gsdpfx Aew Agyijhvott With a 10-year warranty on this chassis With a tridem axle system with 3.5 t gross weight With reinforced cross-country tires electric controls with cable remote fully swinging side wall extension all side panels equipped with net hooks at once. With original manufacturer external charger With a 5-stage tipping ram and top-tier universal joint bearing. Not a trailer for bargain hunters – but for professionals Optional accessories: Remote control: €411.76 net, €78.24 VAT 19%, €490.00 gross Aluminum side extensions 400 mm black: €1,302.52 net, €247.48 VAT 19%, €1,550.00 gross Tarp/frame, e.g. 2000 mm internal height: €1,750.00 net, €332.50 VAT 19%, €2,082.50 gross

Condition: used, maximum load weight: 2,394 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2021, next inspection (TÜV): 03/2027, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, Equipment: tail-lift, Welcome to Gethöffer Commercial Vehicles -- Commercial Vehicle Expertise since 1984 -- We are an official ISUZU main dealer and your first address when it comes to D-Max vehicles customised and converted to your specific requirements! In addition, we are the developers and manufacturers of the extended wheelbase version – the BIG-MAX. Our range is also complemented by the robust Hapert professional quality trailers. Your options with us: We always have at least 20 ISUZU D-Max pickups in stock in various cab types, equipment and body configurations, as well as 20 Hapert trailers across four series (flatbed, tipper, box, and transporter) available at our site. We will be happy to show you the vehicles, advise you on their differences, technical details, and upgrade options. Visit us in 25436 Uetersen, about 30 km northwest of Hamburg. ---- The following information refers to the vehicle offered in this listing: Hapert Cobalt Plus, 335 x 180, 3,500 kg Accessories: This trailer is offered with the manufacturer’s standard equipment. Special accessories: * Remote control * Built-in charger Optional accessories (available for an additional charge): * Removable mesh extension, 75 cm high * Remote control for the hydraulic cylinder * Spare wheel Gsdpfx Asx T Ny Hshvott Standard features: * Loading package incl. approx. 250 cm aluminium loading ramps, integrated under the floor * Lashing eyes with a capacity of 1,000 daN, integrated into the floor, TÜV-certified * HAPERT hinges for attaching the load net * 5-stage hydraulic cylinder with electric operation and emergency hand pump * Foldable jockey wheel * The floor plate consists of 3mm thick, hot-dip galvanised steel * Parabolic suspension incl. axle shock absorbers * Reinforced chassis * Welded and hot-dip galvanised chassis * Numerous sturdy cross-members for high point load capacity * Additional, continuous longitudinal strut welded in * Very stable, bolted V-drawbar * Side panels in aluminium (anthracite), 40 cm high * Rear stabiliser legs including crank handle * LED lighting * Rear light protection Please contact us to receive an individual, needs-based offer. ---- The following information applies to all our listings for the Hapert Indigo Transporter and is identical in content: This powerhouse has been specially developed for extremely heavy work under the toughest conditions. This three-way tipper leaves nothing to be desired. Cobalt Plus three-way tipper, twin-axle Permissible total weight: 3,500 kg Available formats in cm: 335 x 180 Parabolic suspension? For more information, we recommend the following two links: Warranty: * 10 years: on the chassis * 2 years: on original Hapert spare parts and accessories * 1 year: on all other retrofits and upgrades The aforementioned warranty periods apply from initial commissioning! For demonstration or used vehicles, the periods are correspondingly shorter. Compliance with the respective manufacturer’s warranty conditions is mandatory. Warranty and guarantee claims are valid only upon presentation of suitable maintenance records! Hapert specifies a maintenance interval of 12 months. ---- Dimensions and weight data may vary due to the installation of superstructures and accessories. All vehicles requiring technical modifications that require inspection by an expert will receive a temporary registration from us.

Condition: new, empty load weight: 1,260 kg, maximum load weight: 2,240 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, suspension: steel, tire size: 195/50r13c, *Large three-way tipper from *trailer manufacturer* HAPERT model COBALT HM-2-FERRO 3500kg 405x200x30. Gtjdpfjqxbknsx Ahvot In our opinion, the *Cobalt tipper series* from *Hapert* is extremely stable, very well equipped and has a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment and a very comfortable chassis (parabolic suspension) come as standard with this* three-way tipper trailer*. Here is an overview of the extensive standard equipment of the *tipping trailer*. Built with an extremely sturdy hot-dip galvanized steel frame, solid steel floor, slide-in ramps under the loading area, crankable rear support set, parabolic suspension with shock absorbers and 100 km/h, electro-hydraulics with battery in the container with cover, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for *Hapert three-way tippers*. We can provide you with a side wall attachment, grid attachment, tarpaulin, bows, flat tarpaulin, charger, emergency hand pump, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: new, empty load weight: 700 kg, maximum load weight: 2,200 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.7 m³, color: green, construction height: 2,570 mm, working width: 1,860 mm, Manufacturer: Hapert Type: Cobalt 3-sided tipper HM-2 Perm. total weight Weight: 3000 kg Payload: 2200 kg Empty weight: 800 kg Box dimensions: 3050 x 1800 x 300 mm with tarpaulin green RAL 6005 and 180 cm bows Clearance height with self-retracting rear gable Tyres: 185 R14C Loading height: 750 mm with electro-hydraulics Three-sided tipper - Chassis completely welded and fully galvanized - Solid hydraulic cylinder with electric pump - Galvanized sheet steel on multiplex floor plate - TÜV-approved load securing system - New side wall hinges included. Very simple attachment option for a cargo net, for example. - 4 removable corner stanchions - Aluminum walls, 30 cm high, with robust recessed locks - Heavy-duty folding support wheel - Only original BPW parts in use - 13-pin plug Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, you will receive a free transfer license plate from us. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints. Hydraulic cylinder with hand pump, automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, high tarpaulin, heavy-duty folding support wheel, marker lights, galvanized sheet steel on multiplex floor plate, overrun brake, incl. warranty, chassis completely welded. Guarantee, Chassis completely welded and fully galvanized, TÜV-approved load securing system, New dropside hinges incl. very simple attachment option for a cargo net, 4 removable corner stanchions, Aluminium walls, 30 cm high, with robust recessed locks, Only original BPW parts used, 13-pin plug Gedpfx Astmfh Rohvott

Condition: new, empty load weight: 900 kg, maximum load weight: 2,600 kg, overall weight: 3,500 kg, axle configuration: 1 axle, loading space length: 3,300 mm, loading space width: 1,770 mm, loading space height: 1,050 mm, suspension: other, tire size: 195/50 r13, Top price, in the usual Hapert quality! 10 years chassis warranty ! *AVAILABLE IMMEDIATELY Model: HAPERT - Cobalt HM- With emergency hand pump Gross loading capacity: 3500 kg Payload: 2600 kg Dimensions L x W: 335 x 180 cm 30cm side walls anthracite Limited version 100Kmh approval -75cm leaf grate attachment Pendulum Including drive-on package and crank supports ✓ Chassis completely welded and fully bath galvanized Gedpfoqwnq Iox Ahvjtt ✓ Low chassis with 195/50 R tires ✓ Solid hydraulic cylinder with electrically operated pump ✓ Heavy-duty folding support wheel ✓ Galvanized sheet steel ✓ TÜV-approved load securing system ✓ Designed dropside hinges for easy attachment of the cargo net ✓ 4 removable corner stanchions ✓ Aluminum walls, 30 cm high, with robust recessed locks Accessories: -70 cm silver aluminum side walls -H-frame If you are offered the same trailer at a lower price, please present it to us !!! If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 4,05×2,00m 3500kg elektrisch +Nothandpumpe +Parabelfeder, empty load weight: 1,182 kg, maximum load weight: 2,318 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Installed accessories - Parabolic suspension incl. wheel shock absorbers - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) Gtodpfx Ahji Awa Dovet - E-pump including emergency hand pump Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - Three hinges on the front and seven on the sides - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. Simply enter "Dapper trailer" in your search engine.

Condition: new, empty load weight: 905 kg, maximum load weight: 2,595 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50 R13 C, Tandem High-Tipper Three-Way Tipper, Manufacturer: Hapert, Model: Cobalt HB-2, Internal Dimensions approx. (LxWxH): 3350 x 1800 x 300 mm, Permissible Gross Weight: 3500 kg Equipment: - Chassis with rigid axles and parabolic spring suspension - Axle shock absorbers for improved driving characteristics - Tires: 195/50 R13 C - V-drawbar, galvanized - Overrun brake with automatic reversing function and ball coupling - Jockey wheel with solid rubber tire and metal rim - 12V lighting system with 13-pin connector and reversing lights - Sturdy frame made of high-quality steel profiles, fully hot-dip galvanized - Floor made from multiplex board - Hydraulic three-way tipping system with electric pump and emergency hand pump - Side panels made of anodized aluminum profiles, approx. 300 mm high - All side panels can be folded down and removed - Robust recessed fasteners - 4 corner posts with hoops mounting - 6 lashing rings recessed into the frame profile Ramp package consisting of: Gtjdpfxowycihs Ahvjt - 2 folding crank supports, fully installed - 1 pair of aluminum ramps, approx. 2.5 m long, load capacity approx. 2.96 t/pair - Compartment for ramps under the loading platform (Images may include accessories subject to an extra charge! Errors, changes, and omissions excepted!)

Condition: used, maximum load weight: 2,538 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2025, next inspection (TÜV): 12/2027, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, Equipment: tail-lift, Welcome to Gethöffer Commercial Vehicles -- Commercial Vehicle Expertise since 1984 -- We are an official ISUZU main dealer and the number one address when it comes to D-Max vehicles designed and adapted specifically to your needs! Furthermore, we are the developers and manufacturers of the extended wheelbase variant - BIG-MAX. Our range is complemented by robust Hapert professional quality trailers for demanding users. Your choice with us: We always have at least 20 ISUZU D-Max pickups in various cab, trim, and body configurations as well as 20 Hapert trailers across the four model series (flatbed, tipper, box, and transporter) available on our premises. We are happy to show you the vehicles, advise you on differences, technical details, and upgrade options. Visit us in 25436 Uetersen, approximately 30 km northwest of Hamburg. — The following information refers to the vehicle offered in this advertisement: Hapert Cobalt HM-2, 335 x 180 x 40, gross permissible weight 3,500 kg Additional equipment: This vehicle is offered in the manufacturer’s standard configuration. Special equipment: * Emergency hand pump * Battery charger * Ramp package * Composite floor * 40 cm high side panels * Rear light protection Optional equipment (at extra cost): * Ramp package including aluminum loading ramps approx. 250 cm, integrated under the floor * 70 cm high aluminum drop-side extensions, swinging * Removable aluminum drop-side extensions, 30 or 40 cm high * Removable mesh extension, 70 cm high * LED lighting Standard equipment: * Parabolic suspension including shock absorbers * Lashing eyes with a capacity of 1,000 daN integrated into the floor, TÜV-certified * HAPERT hinges for securing the load net * Hydraulic cylinder with electric control * Reinforced chassis Gjdpfx Ahex T Nw Ejvett * Welded and fully hot-dip galvanized chassis * Numerous robust crossmembers for high point loads * Additionally, a continuous longitudinal brace welded in * 13-pin plug * Foldable jockey wheel * Very robust bolted V-drawbar Please contact us to receive an individual and requirement-specific offer. ---- The following information applies to all our Hapert Cobalt transporter listings and is content-identical: This large three-way tipper, measuring 400 x 200 cm, is the largest tipper in the HAPERT Cobalt range. You can use this three-way tipper daily for transporting bulk materials, but it is also perfectly suitable for your excavator and other machines. Since the Cobalt HM tips to three sides, it is especially practical in areas where space is limited. HM-3, three-way tipper, triple axle Permissible gross weight: 3,500 kg Available formats in cm: 405 x 200 Parabolic suspension For more information, we recommend the following two links: Warranty: * 10 years: on the chassis * 2 years: on original Hapert spare parts and accessories * 1 year: on all further retrofits and installations The above warranty periods apply from initial commissioning! For demonstration or used vehicles, the periods will be adjusted accordingly. Compliance with the respective manufacturer’s warranty conditions is required. Warranty and guarantee claims are only valid if suitable maintenance records are provided! Hapert specifies a maintenance interval of 12 months. ---- Information regarding dimensions

Condition: new, empty load weight: 1,060 kg, maximum load weight: 2,440 kg, overall weight: 3,500 kg, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, tire size: 185/70r13c, Three-way tipper from trailer manufacturer HAPERT model COBALT HM2+ 3500kg 335x180x40. Gtjdpfxsf Nt Dio Ahvet In our opinion, Cobalt tippers from Hapert are extremely stable, very well equipped and also have a fair price. The high loader car trailer is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the tipper trailer at a glance. An extremely sturdy steel frame is hot-dip galvanized, parabolic suspension with shock absorbers, slide-in ramps under the loading area, crankable rear support set, electro-hydraulics with battery and emergency hand pump, removable illuminated control unit, double-walled 40 cm aluminium side walls anodized in anthracite, all walls are foldable and removable, H-frame, easy-to-operate eccentric locks, low chassis with coarse-tread tyres, LED lighting with light protection, lashing eyes with 1000 kg load capacity, net hooks, solid steel floor, extremely stable automatic support wheel, charger and a reinforced V-drawbar. We offer useful accessories for Hapert three-way tipping trailers. Here you will find a grid attachment, side wall attachment, tarpaulin with frame, tool box, lashing straps and lock at a reasonable price. ----- You can also find all our inexpensive offers on our homepage Germany-wide delivery (except islands) possible! for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, empty load weight: 900 kg, maximum load weight: 2,375 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, loading space volume: 2.4 m³, color: other, construction height: 1,620 mm, working width: 1,870 mm, Manufacturer: Hapert Type: Cobalt + 3-sided tipper Perm. total weight: 3500 kg Weight: 3500 kg Payload: 2375 kg Unladen weight: 1125 kg Box dimensions: 3350 x 1800 x 400 mm Tires: 185/70 R13 C Loading height: 725 mm Three-sided tipper - Chassis completely welded and fully bath-galvanized - Solid 5-stage hydraulic cylinder with electrically operated pump and emergency hand pump mounted - One-piece, 3 mm thick, fully bath-galvanized sheet steel - TÜV-approved load securing system - 4 removable corner stanchions - Steel drop sides, 35 cm high, KTL and powder-coated in anthracite, with robust, recessed locks - Reinforced trailer frame - Parabolic spring instead of rubber spring axle and shock absorber fitted, loading floor height 72.5 cm - 100 km/h approval - 185/70 R13 C tires incl. black rim black rim - Reinforced jockey wheel and Spezail jockey wheel holder - Reinforced aluminum ramps 250 integrated under the floor, incl. U-profile - Sturdy folding crank supports - Lighting contactor mounted - Cobalt+ reinforced grille - Battery charger supplied loose Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints, strong aluminium drive-on rails 250 integrated under the floor, solid 5-stage hydraulic cylinder with electrically operated pump and emergency hand pump mounted, automatic reverse drive, rubber spring axle, independent wheel suspension, tiltable loading area, reinforced jockey wheel and Spezail jockey wheel holder, marker lights, 3 mm thick fully galvanized sheet steel, overrun brake, battery charger supplied loose, incl. warranty, chassis completely welded, chassis completely welded, overrun brake, battery charger supplied loose, warranty included. Guarantee, chassis completely welded and fully galvanized, one-piece, TÜV-approved load securing system, 4 removable corner stanchions, steel drop sides, 35 cm high, KTL and powder-coated in anthracite, with robust, recessed locks, reinforced trailer frame, parabolic spring and shock absorber fitted, loading floor height 72.5 cm, 185/70 R13 C tires incl. black rim, incl. U-profile, sturdy folding crank supports, lighting contactor fitted, reinforced Cobalt+ grille Gjdpfjv S D Tgox Ahvett

Condition: new, empty load weight: 1,170 kg, maximum load weight: 2,230 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,051 mm, loading space width: 1,964 mm, loading space height: 900 mm, suspension: steel, tire size: 195/50 r13, Hapert 3 side tipper Cobalt HM2 Perm. total weight: 3500 kg 405x200x Black special edition *IMMEDIATELY AVAILABLE* With drive-on package, anti-sway bars, parabolic suspension, damper 100 km/h approval and certificate 70cm extension drop sides pendulum You can use this three-way tipper every day to transport bulk goods, but this robust tipper is also perfect for your excavators and other machines. As the Cobalt HM can be tipped on three sides, it is particularly suitable for use where there is not much space available. The Cobalt HM is equipped with a steel floor, electric pump with battery and hand pump so that you can unload your freight quickly and efficiently. Because time is money for you too. TÜV-approved load securing system Designed dropside hinges for easy attachment of the cargo net 4 removable corner stanchions Aluminum walls, 30 cm high, with robust recessed locks If you have any questions, please send us a message or give us a call! Gtjdpfx Aoqwlc Iehvot Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 3,05x1,80m 3000kg Dreiseitenkipper +E-Pumpe+Nothandpumpe+niedriges Fahrwerk, empty load weight: 837 kg, maximum load weight: 2,163 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, Equipment: tail-lift, uploader, Built-in accessories - E-pump including emergency hand pump - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 51 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - Three hinges at the front and five at the side - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light Gtsdpfxoh Ewuxj Ahvet - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, empty load weight: 820 kg, maximum load weight: 1,880 kg, overall weight: 2,700 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50r13c, *3-S-K* tipper with leaf grid from *trailer manufacturer* HAPERT model COBALT HM-2 2700kg 305x180x30. In our opinion, *cobalt tippers* from *Hapert* are extremely stable, very well equipped and also have a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the *tipper trailer* at a glance. A corrugated grid attachment, extremely stable steel frame hot-dip galvanized, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. Gsdpfx Aeqv Eidehvjtt We offer useful accessories for *Hapert three-way tipping trailers*. Here you will find an inexpensive side wall attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Condition: new, empty load weight: 800 kg, maximum load weight: 2,200 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.7 m³, color: other, construction height: 1,070 mm, working width: 1,860 mm, Manufacturer: Hapert Type: Cobalt 3-sided tipper HM-2 Perm. total weight: 3000 kg Payload: 2200 kg Empty weight: 800 kg Box dimensions: 3050 x 1800 x 300 mm Tyres: 185 R14C Loading height: 750 mm with electro-hydraulics Three-sided tipper - Chassis completely welded and fully galvanized - Solid hydraulic cylinder with electric pump - Galvanized sheet steel on multiplex floor plate - TÜV-approved load securing system - New side wall hinges incl. Very simple attachment option for a cargo net, for example. - 4 removable corner stanchions - Aluminum walls, 30 cm high, with robust recessed locks - Heavy-duty folding support wheel - Only original BPW parts in use - 13-pin plug Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints. Hydraulic cylinder with hand pump, automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, heavy-duty folding support wheel, marker lights, galvanized sheet steel on multiplex floor plate, overrun brake, incl. warranty, fully welded chassis. Guarantee, Chassis completely welded and fully galvanized, TÜV-approved load securing system, New dropside hinges incl. very simple attachment option for a cargo net, 4 removable corner stanchions, Aluminium walls, 30 cm high, with robust recessed locks, Only original BPW parts used, 13-pin plug Gtedpfx Ahetmfhxjvjt

Condition: new, empty load weight: 1,170 kg, maximum load weight: 2,330 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 900 mm, Hapert 3 side tipper Cobalt HM Perm. total weight: 3500 kg 405x200x +++*IMMEDIATELY AVAILABLE+++* With drive-on package, anti-sway bars, parabolic suspension, damper 100 km/h approval and certificate 70cm extension drop sides Pendulum You can use this three-way tipper every day to transport bulk goods, but this robust tipper is also perfect for your excavators and other machines. As the Cobalt HM can be tipped on three sides, it is particularly suitable for use where there is not much space available. The Cobalt HM is equipped with a steel floor, electric pump with battery and hand pump so that you can unload your freight quickly and efficiently. Because time is money for you too. TÜV-approved load securing system Designed dropside hinges for easy attachment of the cargo net 4 removable corner stanchions Aluminum walls, 30 cm high, with robust recessed locks If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints. Gtsdpfx Asqwkp Hjhvet

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 Ferro 3,75x1,80m 3500kg +Auffahrpaket +E-Pumpe + Nothandpumpe, empty load weight: 1,138 kg, maximum load weight: 2,362 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,750 mm, loading space width: 1,800 mm, loading space height: 300 mm, Installed accessories - Parabolic suspension incl. wheel shock absorbers - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) - E-pump including emergency hand pump Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 53 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - three hinges at the front and six at the side - double-walled aluminum drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Drawbar coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened roller Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers Gsdpfx Aeh Ewyyshvett - Smooth ride comfort - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, empty load weight: 900 kg, maximum load weight: 2,600 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: other, construction height: 1,070 mm, working width: 1,860 mm, Manufacturer: Hapert Type: Cobalt 3-sided tipper HM-2 Ferro Perm. total weight: 3500 kg Payload: 2600 kg Unladen weight: 900 kg Box dimensions: 3350 x 1800 x 300 mm Tyres: 185 R 14C black steel rims Loading height: 750 mm Three-sided tipper - Parabolic suspension incl. 100 km/h approval - Chassis completely welded and fully galvanized - Solid hydraulic cylinder with electrically operated pump and manual emergency pump - Loading floor made of fully galvanized sheet steel - TÜV-approved load securing system - 4 removable corner stanchions - Aluminium walls, 30 cm high, with robust recessed locks - Heavy-duty folding support wheel - Aluminium drive-on rails integrated under the floor, incl. U-profile U-profile - Sturdy folding crank supports - Battery charger supplied loose - Only original BPW parts in use - 13-pin plug Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints üminium drive-on rails integrated under the floor, solid hydraulic cylinder with electrically operated pump, automatic reverse drive, rubber spring axle, independent wheel suspension, tiltable loading area, heavy-duty folding support wheel, marker lights, loading floor made of fully galvanized sheet steel, overrun brake, incl. warranty, chassis completely welded, fully welded chassis. Guarantee, Chassis completely welded and fully galvanized, TÜV-approved load securing system, 4 removable corner stanchions, Aluminium walls, 30 cm high, with robust recessed locks, incl. U-profile, Sturdy folding crank supports, Battery charger supplied loose, Only original BPW parts used, 13-pin plug Gtedstmd U Eopfx Ahvet

Condition: new, empty load weight: 1,061 kg, maximum load weight: 2,444 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 3,300 mm, loading space width: 1,800 mm, loading space height: 1,100 mm, suspension: steel, tire size: 185/70r13c, +++IMMEDIATELY AVAILABLE++ This tipper is up to pretty much any job in the tough construction industry. - 40 side panels in double-walled aluminum, black -70 mm silver drop sides with pendulum action - Heavy-duty aluminum ramps (2500 kg) in ramp shafts Gedeqwkl Ropfx Ahvstt - Heavy-duty support wheel S - SAVERO studded tires 185/70R13C for tough off-road use - Parabolic spring chassis with leaf springs on independent wheel suspension - Sturdy shock absorbers and 100 km/h approval - Heavy-duty gear supports at the rear with crank on crank bracket - Galvanized STAHLBODEN - Lamp guards on the rear lights - Remote control for the hydraulic pump - Additional emergency hand pump - Plug socket for shore power supply - Powerful 95 AH supply battery - Galvanized chassis, extremely sturdy construction Technical data - Gross vehicle weight: 3500 kg - Unladen weight: 1056 kg - Payload: 2444 kg - Loading dimension: 335x180x40 cm - Ladder frame: 70 cm - Loading sill height: 73 cm - Tilt angle: 55° - Side tilt angle: 45 - Tires: 185/70R13C SAVERO studded tires - 6 lashing points (1000 kg) - 12 recesses for screw-on lashing hooks If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, empty load weight: 1,056 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, tire size: 185/70R13C SAVERO Stollenreifen, load capacity: 2,444 kg, Hapert Cobalt Plus 3-sided tipper 330x180x110, 3500 kg, LED *AVAILABLE IMMEDIATELY This tipper is up to pretty much any job in the tough construction industry. - 40 side panels in double-walled aluminum, black -70 mm silver drop sides with pendulum action Gtsdpfx Ajrft Ehohvot - Heavy-duty aluminum ramps (2500 kg) in ramp shafts - Heavy-duty support wheel S - SAVERO studded tires 185/70R13C for tough off-road use - Parabolic spring chassis with leaf springs on independent wheel suspension - Sturdy shock absorbers and 100 km/h approval - Heavy-duty gear supports at the rear with crank on crank bracket - Galvanized STAHLBODEN - Lamp guards on the rear lights - Remote control for the hydraulic pump - Additional emergency hand pump - Plug socket for shore power supply - Powerful 95 AH supply battery - Galvanized chassis, extremely sturdy construction Technical data - Gross vehicle weight: 3500 kg - Unladen weight: 1056 kg - Payload: 2444 kg - Loading dimensions: 335x180x40 cm - Loading sill height: 73 cm - Tipping angle: 55° - Side tipping angle: 45 - Tires: 185/70R13C SAVERO studded tires - 6 lashing points (1000 kg) - 12 recesses for screw-on lashing hooks Price incl. 19% VAT If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, Buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models are available online. Shop conveniently 24/7. Pick up yourself or have it delivered. Gedpfx Ahexrvy Uovjtt The online pickup market for your new trailer offers strong brand manufacturers! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: Hapert Cobalt 330c180x80cm with parabolic suspension as a professional package incl. aluminum loading ramps, folding supports, extension sidewall set black 40/40 pendulum function, storage box, heavy-duty jockey wheel. Invoice with VAT shown, warranty—in the trailer business for over 34 years. Sales & telephone order acceptance during our business hours, Monday to Friday, or anytime via our online shop at trailer-shop.de Copyright – Trademark protection 2025/10