Used Unsinn Three-Way Tipper Trailers for sale (107)

Condition: new, maximum load weight: 2,585 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 300 mm, SPECIAL MODEL * Three-way tipper with electrohydraulics, without emergency pump * Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics * Hollow section construction, welded and fully hot-dip galvanized by immersion * Reinforced, automatic support wheel for secure parking of the loaded trailer, load capacity 500kg * Recessed lashing points mounted in the steel floor * Anodized aluminum hollow profile, foldable on all four sides, removable with recessed locks * 4 plug-in steel corner posts for high load capacity * Lighting with 13-pin plug * Incl. registration certificate Part II and operating manual Large exhibition with various models? Giedpfx Ajygz Twef Sjn

Condition: new, maximum load weight: 1,150 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 350 mm, 1-axle three-way tipper 1800 kg Version with PUMPLESS hydraulics and Spinnlock 80 km/h Gjdpfjyd Awlex Af Ssin Loading area: Steel floor with 8 Spinnlocks integrated into the floor Support wheel: Reinforced automatic support wheel for safe parking of the loaded trailer, load capacity 500 kg Side walls: Anodized aluminum hollow profile, can be folded down on all four sides, removable, with recessed locks Chassis: Unique, torsion-resistant frame, welded and fully hot-dip galvanized for reliable driving characteristics ...over 200 car trailers constantly on display in our showroom Accessories, workshop service, TÜV preparation and presentation

Condition: new, maximum load weight: 2,100 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 1,100 mm, Three-way tipper 3000 kg incl. ramps and supports incl. 75 cm side extensions Gijdpfxjyd Axps Af Sjn Version with electric control and spinlocks Loading area: Steel floor with 8 recessed spinlocks Support wheel: Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg Side panels: Anodised aluminium hollow profile, can be folded down on all four sides, removable, with flush-mounted locks Frame: Unique, torsion-resistant chassis, welded and fully hot-dip galvanized for safe driving characteristics ...over 200 car trailers always on display Accessory workshop service, TÜV preparation and demonstration Sample images, equipment details may vary.

Condition: new, maximum load weight: 1,110 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, 206377 Special Offer Exhibit Trailer (as is) Version with PUMPLESS hydraulic system and Spinnlock Single-axle rear tipper with 10-inch tires 1500 kg total weight 80 km/h Loading area: Steel floor with 8 Spinnlocks integrated into the floor Support wheel: Reinforced, automatic jockey wheel for stable parking of the loaded trailer, load capacity 500 kg Gsdpfx Aoyd Audjf Sein Side walls: Aluminium hollow profile, anodized, can be folded down and removed on all four sides, with recessed latches Chassis: Unique, torsion-resistant frame, fully welded and hot-dip galvanized for safe driving characteristics ...over 200 car trailers permanently on display Accessories - Workshop - Service, TÜV preparation and inspection

Condition: new, maximum load weight: 1,900 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 1,000 mm, Three-way tipper 2600 kg including mounted Unsinn KombiLine side extension, 75 cm high Gsdpfx Aeyd Ay Tsf Soin Version with electric control, Spinnlock system, and a ramp compartment Loading area: Steel floor with 8 Spinnlocks integrated in the floor Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Side panels: Anodized aluminium hollow section, drop sides on all four sides, removable, with recessed locks Chassis: Unique, torsion-resistant frame, welded and fully hot-dip galvanized for safe driving characteristics ...over 200 car trailers always in our showroom Accessories, workshop service, TÜV preparation and presentation Sample images, equipment details may vary.

Condition: new, maximum load weight: 2,310 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 1,200 mm, Special Price instead of €16,169 --> €14,228 Firewood trailer with two compartments 3-way tipper, 3,500 kg incl. roll-up tarpaulin incl. work lights With electric controls, emergency pump without pump, and Spinnlock Loading platform: Gedpfoyd A Drjx Af Ssin Steel floor with 14 Spinnlocks integrated Support wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Sidewalls: Aluminum hollow-section, anodized, foldable on all four sides, removable, with recessed locks anodized, fixed bulkhead panels Volume: 7.7 loose cubic meters Swinging rear flap Flexible partition wall for cargo area: Can be divided into two compartments (1/2 to 1/2, or 1/3 to 2/3) Frame: Unique, torsion-resistant chassis, welded construction, fully hot-dip galvanized by immersion for safe driving characteristics ...over 200 car trailers permanently on display Accessories - Workshop - Service, TÜV inspection preparation and presentation Sample images, equipment details may vary.

Condition: new, maximum load weight: 1,900 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 300 mm, Three-way tipper 2600 kg Version with electric control and Spinnlock Loading area: Steel floor with 8 Spinnlocks in the floor Support wheel: Reinforced, automatic support wheel for safe parking of the loaded trailer, load capacity 500 kg Side walls: Aluminium hollow section, anodised, foldable on all four sides, removable, with recessed locks Frame: Godpfx Aeyd Avzof Soin Unique, torsion-resistant chassis, welded and fully hot-dip galvanized for safe driving characteristics ...constantly over 200 car trailers on display in our showroom Accessories, workshop, service, TÜV preparation and demonstration Sample images, equipment may vary.

Condition: new, maximum load weight: 1,150 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 1,100 mm, 1-axle three-way tipper, 1800 kg including mounted 75 cm high side extension Regular price: €6,533 Model with PUMPLESS hydraulics and Spinnlock Max speed: 80 km/h Loading area: Steel floor with 8 Spinnlocks integrated into the base Jockey wheel: Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg Gisdjyd Avuopfx Af Son Side walls: Anodized aluminium hollow profile, drop-down and removable on all four sides, with recessed locks Chassis: Unique, torsion-resistant frame, fully welded and hot-dip galvanized for reliable driving performance ...More than 200 car trailers on display at all times Accessories – workshop – service, TÜV inspection preparation and demonstration

Condition: new, maximum load weight: 2,160 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, Three-way tipper 3000 kg Godpjyd Axiofx Af Sjin Version with electric control and Spinnlock Loading area: Steel floor with 8 Spinnlocks in the floor Support wheel: Reinforced, automatic support wheel for safe parking of the loaded trailer, load capacity 500 kg Side panels: Aluminium hollow profile, anodized, can be folded down and removed on all four sides, with recessed locks Frame: Unique, torsion-resistant chassis, welded and fully hot-dip galvanized by immersion for safe driving performance ...over 200 car trailers constantly on display in our showroom Accessories, workshop service, TÜV inspection preparation and presentation Sample images, equipment may vary.

Condition: new, maximum load weight: 2,360 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 350 mm, Three-way tipper 3500 kg incl. ramps and supports Version with electric control and spindle lock Loading area: Steel floor with 8 spindle locks recessed in the floor Support wheel: Godpfeyd Ay Hex Af Soin Reinforced, automatic jockey wheel for safe parking of loaded trailer, load capacity 500 kg Side panels: Anodised aluminium hollow section, can be folded down and removed on all four sides, with recessed latches Chassis: Unique, torsion-resistant frame, welded and fully hot-dip galvanised for safe driving characteristics ...Over 200 car trailers permanently on display Accessories, workshop service, TÜV preparation and demonstration Sample images, equipment may vary.

Condition: new, maximum load weight: 2,430 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 2,040 mm, loading space height: 350 mm, Three-way tipper 3500 kg incl. ramps and supports Version with electric control and spindle lock Loading area: Steel floor with 8 spindle locks recessed in the floor Support wheel: Reinforced, automatic jockey wheel for safe parking of loaded trailer, load capacity 500 kg Side panels: Anodised aluminium hollow section, can be folded down and removed on all four sides, with recessed latches Chassis: Unique, torsion-resistant frame, welded and fully hot-dip galvanised for safe driving characteristics ...Over 200 car trailers permanently on display Accessories, workshop service, TÜV preparation and demonstration Gisdpfx Afeyd Au Rs Sen Sample images, equipment may vary.

Condition: new, maximum load weight: 2,590 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, Three-way tipper 3000 kg incl. ramps and supports Version with electric control and Spinnlock system Loading area: Steel floor with 8 Spinnlocks integrated into the floor Jockey wheel: Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg Side walls: Anodized aluminium hollow section, can be folded down and removed on all four sides, with recessed locks Frame: Unique, torsion-resistant chassis, fully welded and fully hot-dip galvanized by immersion bath for safe driving characteristics ...over 200 car trailers permanently on display Accessories – Workshop – Service, TÜV preparation and inspection Sample images, equipment may differ. Gsdpoyd A Azofx Af Ssin

Condition: new, maximum load weight: 2,040 kg, overall weight: 2,600 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, Version with PUMPLESS hydraulics and Spinnlock 14 inches 80 km/h Gijdoyd Arpjpfx Af Son Load area: Steel floor with 8 Spinnlocks recessed in the floor Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Side panels: Anodized aluminium hollow profile, drop-down on all four sides, detachable, with recessed locks Chassis: Unique, torsion-resistant frame, fully welded and hot-dip galvanized for reliable driving characteristics ...constantly over 200 car trailers on display in our showroom Accessories, workshop service, TÜV preparation and demonstration

Condition: new, maximum load weight: 2,160 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, ?Stock Clearance Sale? * Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics Gedpoyd Ehmjfx Af Ssin * Welded box-section construction, fully hot-dip galvanized by immersion * Prepared for ramp holder installation * Reinforced automatic jockey wheel, load capacity 500 kg * Spinlock lashing system * Drop and removable side walls made of anodized aluminum box section, foldable and detachable on all four sides, with hook locks * Rear wall with steel paneling * Four insertable steel corner posts * Electrohydraulics mounted inside the reservoir with battery, charger, and emergency hand pump (Pumpless) * 13-pin plug and reversing light * Including registration certificate Part II and operating manual Immediately available ?Large exhibition with many different models?

Condition: new, maximum load weight: 1,865 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 300 mm, * Unique, torsion-resistant chassis, welded and fully hot-dip galvanized for safe driving characteristics * Anodized aluminium side panels, drop-down and removable on all four sides, with recessed locks * Detachable steel corner stanchions * Automatic jockey wheel, 500 kg load capacity * Steel floor * Spinlook lashing system * Lighting with 13-pin plug * Includes registration certificate part II and user manual Gjdpfx Afeyd Ed Io Soin * E-pump mounted inside tank, without hand pump ?Large exhibition with many different models? ?Images may differ?

Condition: new, functionality: fully functional, empty load weight: 835 kg, maximum load weight: 2,165 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, tire size: 185R14C, Year of construction: 2025, Three-way tipper UDK 3017-30-14 Spinlock®, 350 mm drop sides with corner lever locks, rear drop side with steel paneling, electric hydraulics with emergency "Pumpless" pump, integrated ramp compartment incl. foldable license plate holder, maintenance support. Internal body dimensions: 3,060 × 1,750 × 350 mm Loading height: 750 mm Payload: 2,160 kg Tyres: 185 R14C 8PR Chassis Torsion-resistant longitudinal chassis frame (continuous from the coupling device to the rear lamp bracket) for superior tracking stability. Enclosed, fully welded and hot-dip galvanized steel frame profile for optimum durability. Integrated ramp compartment with tensioning device and foldable license plate holder for secure and elegant storage of ramps under the loading platform. Supplied with maintenance support to secure the tilted bed during servicing. Jockey Wheel Reinforced automatic jockey wheel, mounted on a separate crossmember, with a load capacity of 500 kg for safe parking of the trailer. Manoeuvring handle with practical ratchet strap winder for easy handling. Load Platform & Bed Continuous heavy-duty steel floor across the full vehicle width. Bed with maximum number of crossmembers for superior point load capacity. Load Securing Patented Spinlock load securing system for greater flexibility and efficiency, DEKRA certified. 10 recessed lashing pins symmetrically distributed in the steel floor. Lashing pins above and below the platform, each loadable up to 1,500 daN (kg) and rotatable 360°. Pot magnet with key fob for easy removal of lashing pins when the drop side is open. Drop Sides Anodised, fully foldable and removable aluminium drop sides. Galvanized corner lever fasteners with spring-loaded safety catch. Rear drop side with steel paneling, foldable, including slip protection for ramps. 4 plug-in steel corner stanchions for high load capacity and easy loading & mounting of accessories. Giodpfx Asxc Eh Aef Ssn Hydraulics Protected mounting of the electric hydraulics with battery and high-performance charger for long service life. Pumpless emergency pump incl. matching socket wrench insert for convenient and simple tipping operation using a cordless screwdriver in case of low battery.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, Vehicle Data – Certificate of Conformity (GTP 35) Manufacturer: Unsinn Fahrzeugtechnik GmbH Type: GTP 35 Variant: 3.V. Version: E.T.M.K.3.R.1 Trade designation: UDK 3030-14-1750 Vehicle category: O2 Vehicle Identification Number (VIN): WUF2H5800S0217734 Date of manufacture: 07.03.2025 Type approval location: e12007/4601164*04 Approved speed: 140 km/h ⸻ Dimensions • Axles: 2 / 4 • Wheelbase: 3292 mm • Axle spacing: • 1st: 2572 mm • 2nd: 720 mm • Length: 4530 mm • Width: 1930 mm • Height: 1100 mm • Distance from center of coupling to rear: 4492 mm • Cargo area length: 3060 mm • Rear overhang: 1200 mm ⸻ Weights • Unladen weight (ready-to-drive): 489 kg • Axle 1: 232 kg • Axle 2: 232 kg • Technically permissible gross weight: 3000 kg • Axle 1: 1500 kg • Axle 2: 1500 kg • Axle group 1: 3000 kg • Permissible nose weight (techn.): 100 kg ⸻ Tyres and Rims • Wheel/tyre combination (e.g., standard tyres): 185R14C 104N on 5.5Jx14 ET30 • Permissible combinations according to notes: 195R14C, 185R14C, 185/60R12C, 195/60R12C, 195/50R13C – with various rim sizes (e.g., 5.5Jx14, 6Jx14, 5.5Jx13, etc.) Offset (ET): 25–35 mm ⸻ Towing Device • Approval number: E1 55R-011594 ext.02 • Specifications: • D-value: 26.9 kN • Nose weight (S): 325 kg ⸻ Brakes, Body, Equipment • Brake: Mechanical • Body code: DC10 • TPMS (tyre pressure monitoring system): No Gijdpfswywyzex Af Ssn • Shock absorbers required for 100 km/h approval • Not certified according to UN ECE R 155/156 - - - All information without guarantee - - - Illustrations may differ - - -

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Mesh Extension Three-Way Tipper" Three-way tipper with corrugated mesh extension from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! The high-loader, three-way tipper, is equipped with electric hydraulics for tipping. The foldable and removable side walls make the car trailer easy to load from the side and rear with a forklift, wheel loader, or by hand. A welded and hot-dip galvanized steel frame makes the tipping trailer very stable. The tipper is equipped with a mesh extension, folding and removable side walls, a solid steel floor, electro-hydraulics, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, a rail shaft, and a very sturdy V-shaped drawbar. Tipper accessories such as a side wall extension, tarpaulin and frame, flat tarpaulin, net, box, loading rails, and supports are available for an additional charge. ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories Gedsg Un Dzopfx Af Ssin · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: like new (used), functionality: fully functional, empty load weight: 835 kg, maximum load weight: 2,165 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, tire size: 185R14C, Year of construction: 2024, UDK 3017-30-14 with mesh extension 1 day = €55 2 days = €50 per day 3 days = €45 per day 4 days = €40 per day Prices include VAT. With steel floor - Spinlock, hook fasteners, and electric hydraulics with emergency pump - Steel-aluminum side wall 350mm / ramp shaft including folding license plate holder Three-way tipper Max. Total weight 3000 kg Payload approx. 2210 kg Box/trunk dimensions (interior L/W/H): 3060 x 1750 x 350 mm Tires 185 R14C 8PR Number of axles: 2 Trailer loading height approx. 770 mm Frame Torsion-resistant longitudinal member chassis (longitudinal members continuous from the overrun device to the light bracket) for excellent directional stability Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability Integrated ramp shaft with tensioning device and foldable license plate holder for safe and elegant storage of the loading ramps under the loading area With maintenance support to secure the tilted deck during maintenance work Joint wheel Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer Maneuvering handle with Practical tensioning strap reel for easy handling Loading area & bridge Solid steel floor across the entire width of the vehicle Bridge with a maximum number of crossbeams for particularly high point loads Side walls Anodized, fully foldable and removable aluminum side walls Galvanized angle lever locks with spring lock Rear side wall with steel planking, foldable including anti-slip protection for loading ramps Four plug-in steel corner stanchions for heavy loads as well as easy loading and attachment of accessories Load securing Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA certified Lashing pins on and under the loading area, each with a load capacity of up to 1500 daN (kg) and rotatable 360° Pot magnet with key ring for removing the lashing pins when the side wall is open Hydraulics Protected electric hydraulic system with battery and powerful charger for a long service life Pumpless emergency pump Includes a matching socket wrench for convenient and easy tilting with a cordless screwdriver when the battery is low. Electrics Lighting with a 13-pin connector and protected rear lights for long and safe operation. Function of the electrical components. Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly Gsdpfetq Hmwex Af Sjin durable.

Condition: new, functionality: fully functional, empty load weight: 530 kg, maximum load weight: 1,270 kg, overall weight: 1,800 kg, axle configuration: 1 axle, permissible axle load (axle 1): 1,800 kg, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 10 mm, tire size: 195/ 50 R13C, Year of construction: 2026, Overall dimensions: 517 x 189 x 72 cm Floor plate: Anti-slip phenolic plywood floor plate Side walls: Aluminium side walls Gijdpfxoyhp R Ho Af Son Lashings: 8 recessed lashing points inside the steel outer frame, 8 lashing rings underneath the loading area Special features: Tiltable loading platform, all side walls foldable/removable, plug-in corner stanchions, tow bar cross brace

Condition: used, maximum load weight: 2,680 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 06/2017, next inspection (TÜV): 02/2026, loading space length: 3,630 mm, loading space width: 1,800 mm, loading space height: 300 mm, Unsinn UBA 3536-14-1800: Internal dimensions: 3.63 m L x 1.80 m W x 0.30 m H * 3500 kg permissible total weight Gedsxdpuvspfx Af Sjin

Condition: new, functionality: fully functional, empty load weight: 615 kg, maximum load weight: 1,985 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 1,940 mm, total length: 5,100 mm, total width: 2,270 mm, total height: 2,520 mm, tire size: 185/655R14, color: white, trailer brake: trailer braked, Unsinn UKU 361719-26-14 Unique Box Van Series with High Payload Capacity Sophisticated, premium, and high-quality box trailer with excellent road handling and wider loading dimensions. Ideal for transporting valuable goods or equipment. Rear doors: double-wing, lockable, with rubber seal. Technical Data: Permissible gross weight: 2,600 kg Unladen weight: approx. 615 kg - Payload: approx. 1,985 kg Braked tandem axle Box internal dimensions (LxWxH): 366 x 175 x 194 cm Overall dimensions (LxWxH): 510 x 227 x 252 cm Tyres: 185/65R14 new tyres Loading height: approx. 55 cm Features: Galvanized axle and V-drawbar Maintenance-free rubber spring axle Overrun brake with reverse mechanism and AL-KO handbrake Self-adjusting wheel brakes Highly torsion-resistant aluminium chassis with additional cross members for safe driving dynamics Continuous 18 mm anti-slip phenolic plywood floor, water-resistant Body panels made from lightweight GRP-steel sandwich (RAL 9016) GRP exterior suitable for signage, steel interior for impact resistance Roof made of lightweight GRP sandwich panels (RAL 9016) Stainless steel rotary bar door lock and door holders (double door version only) Rear frame and edging profiles made from special anodized aluminium profiles for attractive aesthetics Solid roof, interior light, rear carrier with protected multifunction lighting Waterproof box body, all locks and fittings in V2A stainless steel Automatic jockey wheel, 500 kg load capacity for safe parking under load, centrally mounted Easy mounting of additional attachments thanks to system profile rail Lashing rail at 900 mm height on both sides Sliding lashing system: 8 foldable lashing rings in a rail at the base of the wall, infinitely adjustable and expandable 12V electrics, 13-pin plug, reverse lights Swivelling LED interior light with motion sensor, including batteries Various accessories available (prices on request): Rear support legs for existing system rail Anti-theft devices in various versions Loading ramps Motorcycle stand and loading track Available options / accessories (on order): Ramp instead of rear doors, with lift assist, internal aluminium checker plate covering Additional LED lights for interior Rear support legs for existing system rail Anti-theft devices in various versions Loading ramps Motorcycle stand and loading track Refrigeration unit Front door Side flap (sales hatch) Side door ! Many more trailers available at >>> trelex.de ! Gsdpfx Asyg Hu Hef Ssin * Financing and trade-in available! * Extensive selection: Over 300 trailers always in stock, visit us! * Professional and fair advice, fast processing. * Questions? Just call! PLEASE NOTE: Immediate pick-up only possible with prior reservation!

Condition: new, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,100 mm, loading space width: 1,100 mm, loading space height: 350 mm, * Unique, torsion-resistant aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the sidewall for secure load securing * Side walls made of anodised aluminium hollow profile, rear side foldable, with recessed locks Giodpeygz Tqsfx Af Ssn * Folding front wall * Loading height 550 mm * Multi-bonded phenolic plywood, 15 mm, seamless, anti-slip and waterproof * Lighting with 13-pin plug * Incl. Registration Certificate Part II and user manual Large exhibition with many different models?

Condition: used, functionality: fully functional, empty load weight: 500 kg, maximum load weight: 800 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2012, next inspection (TÜV): 01/2028, loading space length: 3,050 mm, loading space width: 1,570 mm, loading space height: 1,940 mm, maximum speed: 100 km/h, color: white, trailer brake: trailer braked, Box trailer made of plywood panels with GRP surface, loading ramp covered with aluminium checker plate, access door on the right-hand side in direction of travel, shock absorbers for 100 km/h approval (tyres from KW33-2023), automatic jockey wheel, airline track mounted centrally on the floor, lashing rail left and right, 6 lashing rings (3 per side, adjustable), rear sliding supports, 2 wheel chocks, manoeuvring handles at the front. Gedpoygkvhefx Af Soin Sale on behalf of the client. VAT not deductible. Subject to errors and alterations.

Condition: new, maximum load weight: 1,045 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,400 mm, loading space height: 350 mm, * Type: UT 2514-13-14 * Low loader trailer, 1300 kg gross weight * Load securing: 4 x recessed, foldable lashing eyes integrated into the side walls, each with a load capacity of 300 daN * Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg * Manoeuvring handle for easy handling * Torsion-resistant aluminium chassis for excellent tracking stability * 100 km/h version * Single-axle trailer with drawbar Gjdpfxeyd A A Io Af Soin * Anodised aluminium side panels * Rear panel foldable and removable * Recessed plastic locks * Multi-ply, slip-resistant and waterproof phenolic plywood floor (15 mm) * Plywood floor fully enclosed within the side panels * Lighting with 13-pin connector * Front panel opens * Accessory workshop service, TÜV inspection preparation and presentation