Used low loader trailer / lowboy trailers for sale (543)

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering function and RtR valve * Smard on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at rear * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel and spare wheel holder, basket design, right side * Front: closed single fender made of plastic * Rear: straight steel mudguards with spray protection (anti-spray device) * Side underrun protection * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above turntable platform: 50 mm, in low-loader platform: 60 mm softwood * Outer planks of the ramp made from hardwood * 4 stake pockets on each side (no stakes included), each offering 2 t lashing option * Load securing kit consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform * Each front and rear side: 2 pairs of 13.4 t lashing rings on the outer frame, as well as 4 pairs per side of 10 t folding and lowerable lashing rings * Loadable from any direction and recessed into the outer frame * 2 pairs of 6.4 t lashing rings on the side in the excavator arm storage * 8 pairs of galvanized folding outriggers for 3 m overall width (not at the rear slope) * Widening planks stowed on the left in a storage compartment * Excavator arm storage above the rear axle up to end of access slope approx. 2,100 x 740 x 190 mm * Mechanical rear drop supports * Hydraulic folding ramps with hydraulically adjustable tapered section, approx. 4,650 x 720 mm, incl. hydraulic side ramp displacement & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm Chodpfx Aol Tphrek Tob * Loaded platform height: approx. 890 mm, +/- 20 mm (including 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm drawbar eye and height adjustment ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * LED tail lights 12 / 24 V * 15-pole power connector Chjdpfx Akol Tq Nme Tob ----General attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour strip on the sides and rear * Side underrun protection * Plastic quarter fenders with splash guards * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading platform: * Main frame with raised outer frames to guide the roll-off containers * Steel sheet floor with recesses for the rollers in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welded bead as an anti-slip surface in the track area of the ramp * Mechanical rear support legs ----Load securing: * 1 pair of 10-ton UVV lashing rings at the front on the end wall beam * 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame * 4 x 2-ton lashing eyes each on the sides in a cloverleaf design * 4 x 8-ton lashing brackets embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * but the drawbar, axles, and air tank are painted in a black tone ----Information: * New vehicle without initial registration with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available approximately from week 43 / 2026

Condition: new, maximum load weight: 30,310 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight 40,000 kg Payload 30,310 kg Empty weight 9,690 kg Total length 12,000 mm Loading length 10,000 mm Loading bed 7,150 mm including 850 mm approach slope Loading height 900 mm 1st pair of wheel recesses after offset in the loading bed, bottom length approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, bottom length 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, rotating beacon, large lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tires 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps 2,800 mm x 750 mm with hydraulic actuation Hydraulic side shift Rent-purchase offer: term 48 months, residual value 40%, down payment only VAT on the rental rates, monthly rate EUR 970.00 net Vehicle will be available from September 11th, 2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121 right next to the main entrance. Csdpfjnzlg Dox Ak Tohb Other 3, 4 and 5 axle low loaders new and used available immediately

Condition: used, machine/vehicle number: GE11/142/2022, empty load weight: 6,350 kg, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2008, loading space length: 8,500 mm, loading space width: 2,500 mm, suspension: air, Very well-maintained vehicle from first owner Three-axle low-loader trailer Low-loader with drive-up ramp Heavy-duty transport Model T3 Komakt 30.0 Length 8,500 mm Width 2,500 mm Air suspension Commercial/export net price – €15,990 Subject to changes, interim sale, and errors ===== Phone2 Codpfx Akon Aw Hks Tehb Mobile =====

Condition: used, empty load weight: 4,400 kg, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2012, loading space length: 6,770 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, turntable, air-suspended, lifting+lowering, ABS (anti-lock braking system), lashing eyes, container lock, twin tires, storage box Body: 2-axle turntable flatbed trailer with stanchions and TwistLock locks, TwistLock can be extended to 3m. 20t, drum brake, air suspension, 10t Gigant axles, ramp shaft 40x16cm. Access ramp for 1.000,- EUR extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Chedpst Uq D Tofx Ak Teb - .

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: Chjdpfx Akstr Suce Teb * Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation * 15-pole power socket * LED tail lights ----General components: * Mechanical support jacks at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Bolted underrun protection * Plastic quarter fenders ----Frame: * Main frame made of fine-grain steel ----Tipping platform: * Net hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lift and pivoting via manual central locking * Rear rails bolted on * Steel rear wall inserted in front of the ramps * 1 x 5-ton lashing point in each corner, as well as 4 x 3-ton lashing eyes on each side embedded in the outer frame * 4 mm floor made of fine-grain steel ----Ramps: * Two-part mechanical grid ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable up to 80 mm) ----Painting: * Chassis, drawbar, rear rails, underrun protection, mechanical support jacks, and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling, and support jacks painted in a black tone * Side boards and platform painted in RAL 9010 pure white * Painting of the side walls and tipping platform in a RAL color is possible for an extra charge ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Condition: excellent (used), maximum load weight: 6,055 kg, color: blue, Year of construction: 2019, Very nice 2019 Gheysen & Verpoort 1 axle flatbed trailer. Chjdpstz Sgvsfx Ak Tjb

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, empty load weight: 265 kg, maximum load weight: 1,085 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 255 133 1350 NEW VEHICLE Internal dimensions: 255cm x 133cm Side panel height incl. railing: 43cm Loading area height: 51cm Total weight: 1350Kg Payload: 1085Kg Braked single-axle low-loader Overrun brake and parking brake by AL-KO 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust screen-printed plywood side panels Chodpfx Akjghpbve Tob Steel railing Rear side panel foldable and removable with tensioning fastener 15mm thick, non-slip and robust screen-printed plywood floor Drawbar wheel 6 lashing eyes with 400Kg tensile force 14" reinforced C tires 2x U-shaped chock M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lamps with reversing light and triangular reflector OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Ramps -SARIS aluminum rims -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Leaf grid in various heights, also closed -Flat cover with or without bow -High cover 150cm or 180cm -Rear supports Further accessories available on request! Plus shipping to Gera and vehicle registration document 150 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: new, empty load weight: 7,500 kg, maximum load weight: 32,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 03/2023, loading space length: 9,700 mm, loading space width: 3,000 mm, loading space height: 900 mm, suspension: air, tire size: 235/75r17,5, Year of construction: 2026, Equipment: ABS, center pivot plate, TOP FEATURES => INCLUDES THE FOLLOWING ACCESSORIES: Chassis frame hot-dip galvanized Storage box at the front on top of the platform, with hinged lid Storage box at the rear on top of the platform, with hinged lid Recess for excavator arm storage, low-bed area at the rear 3 m equipment package without slope Warning package for special permit Steel sheet toolbox Ladder support package in the outer frame Basic hydraulics for trucks with rear connection Hydraulic ramp lift for 1-piece ramps Hydraulic ramp adjustment, lateral Hydraulic support legs, left and right, 1 each 1 pair of lashing eyes, 6 tons, in the outer frame, bolted WABCO Smart Board, configured SSV complete, front left, HTD409525K COC, Certificate of Conformity OPTIONAL Rubber flooring on the ramp, €1890 net Codpfxoglblls Ak Tjhb Rubber flooring on the slope, €1250 net Reversing drawbar, 40 / 50 DIN

Condition: new, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2026, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIPPED GALVANIZED CHASSIS FRAME => HOT-DIPPED GALVANIZED AXLE FRAME => HOT-DIPPED GALVANIZED RAMP => 10 PIECES OF 10-TON LASHING POINTS => 10 PIECES OF 3-TON LASHING POINTS, OUTER FRAME => 8 PIECES OF 2-TON LASHING POINTS, OVER WHEELS => SPRING-LOADED MECHANISM FOR THE RAMPS => Ø 40 MM DRAWBAR => RAMPS APPROXIMATELY 2,700 MM LONG Chodpfjd U A Tgsx Ak Tjb => RAMPS APPROXIMATELY 750 MM WIDE => TWIN TIRES 235/75 R17.5 => LOAD HEIGHT WHEN LOADED ONLY APPROXIMATELY 860 MM => COUPLING DIMENSION / B-DIMENSION APPROXIMATELY 10,720 MM => CORNERS AT THE FRONT ARE BEVELED => TWO FOLDING SUPPORTS AT THE REAR => AND MORE => Shipping costs for delivery: 2.90 Euro plus VAT per km => Prices are ex works D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE CONSTRUCTION *Subject to prior sale and changes!* *Price valid ex works D-86368 - Gersthofen* *Sales only to business customers!* *Images may vary and are for general guidance only => may include/show accessories at an additional cost*

Condition: new, functionality: fully functional, machine/vehicle number: MP 255 153 1500 1, empty load weight: 285 kg, maximum load weight: 1,215 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,530 mm, loading space height: 430 mm, Dropside, railing and co. - Folding and removable anodized aluminium rear wall - Robust fasteners with double action - 30 cm high anodized drop sides - Railing made of hot-dip galvanized steel, riveted (total height 43 cm) - Easy to clean thanks to intelligent dropside profile Chassis and frame Chjdpfx Aop N Txrok Tjb - Fully supported floor - V-drawbar - Towing ball coupling with safety indicator - Automatic support wheel Loading area and floor - Continuous, non-slip and waterproof screen-printed wooden floor - 15 mm thick - Finnish birch plywood Lighting equipment - Modern multifunctional lighting - with reversing light - with rear fog light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Maintenance-free compact wheel bearings - Plastic mudguards - Wheel chocks with bracket Lashing and securing options - 6 retractable lashing points, 400 daN Documents and freight costs - Freight costs to us already included - incl. vehicle registration document (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: MP 255 133 1350 1, empty load weight: 235 kg, maximum load weight: 1,115 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, Dropside, railing and co. 30 cm high double-walled anodized drop sides -folding and removable anodized aluminium rear wall -robust fasteners with double action Railing made of hot-dip galvanized steel (total height 43 cm) -easy to clean thanks to intelligent dropside profile Chassis and frame -Fully supported floor -Quad-tube drawbar -Towing ball coupling with safety indicator -Support wheel with reinforced clamp Loading area and floor -Continuous, anti-slip and waterproof screen-printed wooden floor -15 mm thick -Finnish birch plywood Lighting equipment -modern multifunctional lighting -with reversing light -with rear fog light -with two marker lights -13-pin plug Wheels and axles -robust rubber spring axle -with automatic reverse -maintenance-free compact wheel bearings Chjdpfx Aop R S Ewjk Tob -Plastic mudguards -wheel chocks with bracket Lashing and securing options -6 retractable lashing points, 400 daN Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,600 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,450 mm, loading space height: 400 mm, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2026, Equipment: ABS, Humbaur HBTZ 146225 * Tandem low-loader * Twin tires * New * Aluminum drop sides * Spare wheel * Permissible total weight: 14,600 kg * Unladen weight approx. 3,700 kg * Payload: 10,900 kg * Support load: 1,000 kg * Overall dimensions: 8,350 mm x 2,550 mm x 3,000 mm * Platform internal dimensions: 6,280 mm x 2,450 mm * Side wall height: approx. 400 mm * Loading height (unladen): 850 mm * Drawbar length: approx. 1,800 mm * Coupling height: approx. 600 - 800 mm * Ramp length and width: approx. 2,400 mm x 520 mm * Approach angle: approx. 15° * 24 V lighting system * 15-pin plug for lighting * 3 pairs of 6 t recessed lashing points in the platform floor * 7 pairs of 2 t lashing points on the outer frame * Reinforced 12 t gear support winch with load and fast gear * Telescopic folding supports left and right * 2 foldable steel ramps, laterally adjustable * 1 gas strut per ramp * Ramp lock at rear stanchion * Steel mudguards * Foldable side underrun protection * 2 wheel chocks with holders IMPORTANT !!!!! PLEASE READ !!!!! We expressly reserve the right to prior sale as this item is also being offered on other platforms. We strongly recommend viewing and inspection to prevent any misunderstandings about the condition or suitability of the trailer. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged! Illustrations may be similar and may include optional accessories subject to surcharge. The specified internal dimensions are approximate figures. For new vehicles, additional costs for vehicle documentation and freight may be incurred. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Cedpfx Aercfn Ssk Tshb Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, empty load weight: 250 kg, maximum load weight: 1,250 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 300 mm, tire size: 145/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT1500 301x126. The standard equipment of the Anssems box trailer with brake includes aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. Chjdpsq Slqtofx Ak Tjb We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: new, empty load weight: 6,700 kg, overall weight: 30,000 kg, loading space length: 8,550 mm, loading space width: 2,540 mm, Year of construction: 2026, Equipment: trailer coupling, HTD30K- RM-BM / Air suspension Technical data: Internal dimensions: approx. 8,550 mm x 2,540 mm Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm Gross vehicle weight: 24,000 kg Payload: approx. 17,300 kg Tires: 235/75 R17.5 ZW inch Loading height: approx. 900 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 800-980 mm Screed length: approx. 3,150 mm Screed width: approx. 750 mm Permissible total weight special gen.: 30,000 kg Payload special gen.: approx. 23,300 kg Drop deck length: approx. 6,500 mm Overall dimension (B dimension): 10,800 mm Total weight (technical): approx. 33,000 kg 8 pairs of lashing rings, 3,000 kg per lashing point Lashing rings in the outer frame 3 pairs of lashing rings, 10,000 kg per lashing point Lashing rings in the drop deck, recessed Chjdpfx Aeq Ulaqok Tob 2 pairs of lashing rings, 10,000 kg per lashing point Lashing rings in high bed, recessed 4 pairs of lashing rings, 2,000 kg per lashing point Over wheel cut-out 2nd and 3rd axle 7 pairs of lashing rings, 3,000 kg per lashing point Stake pocket (90x50 mm) with lashing option Standard equipment: Axles Low loader axles from renowned manufacturers Suspension Air suspension unit including lifting and lowering acting on rear axle unit Brake system Brake system in accordance with EC directives with EBS 4S/3M in multi-voltage version (12-24V), spring-applied parking brake incl. 2 test connections pulled outwards for brake/modulator and bellows pressure Electrical system LED lighting with flashing function for side marker lights, multi-voltage (12-24V) Bogie Solid welded construction with low-maintenance ball bearing slewing ring Draw gear Drawbar with 8° inclined drawbar eye Ø40 mm, height-adjustable Low-maintenance silent bushes Frame Solid welded construction made of high-strength fine-grained steel Extended cross members for maximum stability Wheel recesses at the front (top length approx. 2,170 mm) and rear (top length 1,280 mm), depth 330 mm Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm) Maximum safety during loading and unloading Floor 50 mm softwood flooring Ramps One-piece hot-dip galvanized drive-on ramps (3,100 mm x 750 mm) with 50 mm softwood decking, can be moved sideways Direct-acting vertical spring jacks for easy operation Optimum securing with turnbuckle and counter stop Finishing Hot-dip galvanized chassis and bogie frame Support 2 folding supports at the rear left and right at the rear of the vehicle Equipment Folding side collision protection Other equipment Retroreflective line markings in accordance with ECE Directive R48, white at the sides and red at the rear front admulden cover with 2 pairs of stanchion pockets, without lining (cover can be lowered under the side rails) Hardwood lining for RM front covers Wheel well cover Hardwood lining for rear RM cover Front storage box at the top of the plateau, with hinged cover Size approx. L 700 x D 810 x H 140 mm Warning package LED HTD cranked Aspöck warning signs 4-fold, electrics and rotating beacon 3 m equipment package without upward slope for HTD30K wheel wells with 6,500 mm drop deck Folding boom with spruce planks for the straight part of the drop deck Basic hydraulics for trucks with rear connection, Operating pressure max. 200 bar and up to 150 l/min with 2-circuit hydraulic connection and return line with SVK BG3 quick coupling connection Hydraulic ramp displacement laterally by approx. 300 mm in each case Hydraulic ramp lift for 1-part ramps Hydraulic support legs left

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, ETÜ-TA-R 19.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11-ton Gigant axles ----Suspension: Chsdpfx Aopk D Ncek Tjb * Air suspension with manual lowering at the rear ----Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm on the right side (powder-coated in black) * Side underrun protection * Plastic quarter mudguards ----Lowbed Deck: * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm softwood flooring, clamped version * Pre-fitted for subsequent installation of container locks in front of the bulkhead * Bolted smooth sheet steel bulkhead * Drop sides made of trapezoidal profile steel – folding, with drop-side lift support * Steel rear wall, can be slid between the ramps – storage holder in front of bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame approx. 45 degree flanged with 2 t lashing points every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the bulkhead and end crossmember for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear ramp approach angle approx. 860 mm ----Tires: * Wheelbase: 1,310 mm * Tires: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Sideboard paintwork in RAL 9010 pure white * Paintwork for the side panels available in any RAL color for an extra charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Extendable widening elements to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-loader 1 pair of tie-down points on the gooseneck, each 5 tons 9 pairs of tie-down eyes embedded at the top and sides in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of tie-down holes in the outer frame of the low bed, each with 5 tons. (for securing lashing straps) Coupling device for trailer turntable Drawbar with tested 50 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical incl. Axle load equalization at the front and rear (lever equalization) Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED warning light with holder, switched via side lights (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connecting cable Floor Gooseneck at the front with steel/diamond plate thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with quick-release coupling NW 10/3, incl. connecting hose Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline included Csdpji Ri Izefx Ak Tjhb prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rusting Drawbar galva

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Chjdpfx Aji Ri I Eok Tsb Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red 10-year warranty against rust-through Tow bar: galv

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Cedpfx Aji Ri I Njk Tohb Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: used, empty load weight: 650 kg, maximum load weight: 2,350 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 08/1991, loading space length: 2,970 mm, loading space width: 1,500 mm, loading space height: 400 mm, suspension: steel, tire size: 185R14C, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, tailgate, front supports. Body: Tandem low-loader trailer with aluminum side walls and aluminum loading ramp. Loading height approximately 600 mm! Codpfji Rlb Eox Ak Tohb Ramp length approximately 1500 mm! AL-KO axles! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release system for spring brake cylinders ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Lighting / Electrical: Cjdpfxjrvvfle Ak Tshb * TPMS (Tire Pressure Monitoring System) * LED lighting ----General components: * Jost support leg at the front * External, hot-dip galvanized folding supports at the rear * Plastic tool box on the front right side, attached to the front wall * Lateral underrun protection * Plastic quarter fenders ----Low loader platform: * 50 mm softwood flooring * Mounting device for subsequent installation of container locking mechanisms in front of the front wall * Bolted front wall made of smooth sheet metal * Steel side walls - trapezoidal profile - foldable with sideboard lifting mechanism * Steel rear wall can be slid in between the ramps - bracket for storage when not in use inside, in front of the front wall * Rear cross members bolted ----Load securing: * Perforated outer frame, bent at approximately 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * 1 x 6.3-ton lashing point at each front and rear corner * Various holes in the front and end cross members for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis, in the middle, for lashing with a load capacity of up to 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear, approx. 860 mm ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of the side walls in a RAL color is possible for an extra charge ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm * 40 mm flange coupling ----General components: Cjdervvfwopfx Ak Tshb * Jost support leg at the front * Outboard, hot-dip galvanized folding supports at the rear * Plastic quarter fenders * Plastic toolbox at the front right on the front panel ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting ----Loading platform: * Loading platform 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision on the front panel for subsequent installation of container locking mechanisms * Bolted front panel made of smooth sheet metal * Side walls made of trapezoid-profiled steel sheet, foldable with spring-loaded side rails * Steel rear wall can be slid in between the ramp supports when not in use, positioned inside the front panel * Rear crossbars bolted ----Load securing: * Perforated outer frame, angled at approx. 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * One 6.3-ton lashing eye at each corner at the front and rear * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear, approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front panel, rear wall, rear crossbars and loading ramps * Painting of the side rails in RAL 9010 pure white * Painting of the side walls in a RAL color is possible for an extra charge ----Information: * Errors and prior sale subject to change * New vehicle with manufacturer's warranty ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes Chsdpfx Aksrwc R As Teb ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalising unit ----Drawbar / Flange Tow Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent fitting of container locks * Bolted, 400 mm smooth-sheet bulkhead * Bolted rear stanchions * Side panels with spring assist ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point each in the front and rear corners * Various drilled holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centrally in the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh loading ramps approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 ltr./min. up to 140 ltr./min. max) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop legs, and loading ramps hot-dip galvanised * Axles, springs, air tanks, front support winch, and flange tow eye painted in a black tone * Side panels painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images ----Delivery time: * Available immediately ex Egestorf

Condition: new, functionality: fully functional, machine/vehicle number: NEW - 50, empty load weight: 223 kg, maximum load weight: 777 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 113 1000 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Sidewall height incl. railing: 43cm Loading platform height: 52cm Gross vehicle weight: 1000kg Payload: 777kg Braked single-axle low loader Overrun brake and handbrake by AL-KO 1000kg axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension latch 15mm strong, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg pull force each 13" tyres 2x U-chocks Net/rope hooks on frame 13-pin plug Front marker lights Rear lights with reversing light, rear fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY PRICE REDUCED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front wall - Loading ramps - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Flat tarpaulin with or without bows - High tarpaulin 120cm, openable on all sides - Rear supports More accessories available on request! Plus freight to Gera and vehicle registration document €100 net Pictures are examples and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock, ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including caravan axles. Chodpfxjrk Ikqo Ak Tjb Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by in person.

Condition: new, functionality: fully functional, empty load weight: 285 kg, maximum load weight: 1,215 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 255 153 1500 2 NEW VEHICLE Internal dimensions: 255 cm x 153 cm Side wall height incl. railing: 43 cm Loading platform height: 52 cm Gross vehicle weight: 1,500 kg Payload: 1,215 kg Braked single-axle low-loader Overrun brake and handbrake by KNOTT 1,500 kg braked axle Low chassis Fully welded hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear tailgate foldable and removable 15 mm thick, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400 kg tensile strength each 14" reinforced C-rated tires M+S tires Net/rope hooks on frame 13-pin connector Front marker lights Rear lights with reversing light, fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100 km/h approval kit (shock absorbers) -Spare wheel with holder -Foldable and removable front wall -Integrated loading ramps, 2,000 kg capacity -SARIS alloy wheels -Full LED lighting -Anti-theft device -Net, fine or coarse mesh -H-frame -Mesh side panels in various heights, also closed -Flat cover with or without bows Csdpfx Akork Imlj Tjhb -High tarpaulin (150 cm or 180 cm) -Rear support legs Further accessories available on request! Plus shipping to Gera and vehicle registration documents: €150 net Pictures are for illustrative purposes only and may show optional, extra-cost accessories. Have you not found the right trailer yet? We have 50–100 vehicles in stock at all times for immediate pickup. Our workshop is open for all types of repairs from 8:00 AM to 5:00 PM on weekdays. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Furthermore, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice over the phone, visit our website, or stop by directly.