Lowbed

Humbaur HTD 40 v21

Condition: new, functionality: fully functional, empty load weight: 7,500 kg, maximum load weight: 36,500 kg, overall weight: 44,000 kg, axle configuration: > 3 axles, loading space length: 9,190 mm, loading space width: 2,540 mm, loading space height: 900 mm, suspension: steel-air, tire size: 235×75 R17,5, wheelbase: 1,310 mm, Year of construction: 2024, Equipment: ABS, center pivot plate, CETRATEK 4-Axle Low Loader TL89.4 (EU-COC) Short Description Robust low loader for heavy machinery transport. Frame made of high-strength ST-52/S355, optionally fine-grain steel S700. Ramps with 20 t load capacity each, mechanically or hydraulically foldable without loss of capacity. Optionally available as a low-bed trailer; loading height in wheel recess area can be reduced from approx. 900 mm to approx. 500 mm. Dimensions / Configuration Total length: 11,914 mm, total height: 3,775 mm (over ramps) Platform: gooseneck 2,440 mm + loading area 6,750 mm Width: 2,540 mm (+ 250 mm manual extension on each side) Coupling → 1st axle: 2,767 mm; → 2nd/3rd axle: 6,136 mm Axle spacings: front 1,310 mm, rear 1,360 mm Platform height: 900 mm (low-bed approx. 500 mm), track width 1,850 mm Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp Drawbar height: 400–900 mm; turntable Ø 110 (CYR) Floor: steel + 45 mm hornbeam hardwood, protective lacquer coating Weights / Capacity a) GVW 44,000 kg → payload approx. 36,500 kg* b) On-road 24,000 kg → payload approx. 16,500 kg * Version a) subject to special approval according to §70 StVZO; certification/DEKRA inspection at extra cost. Towing eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg Rear supports: manual (hydraulic optional) Steel Structure / Chassis Welding qualification TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175 4 × 11 t axles (TRAX), tires 235/75 R17.5 (16 units, PETLAS or equivalent; Continental/Michelin on request at extra cost), rims 6.75×17.5, air suspension, max. 100 km/h permitted Brakes / Electrics WABCO EBS 4S/2M, brake pads 330×200, air tanks 2×80 L + 1×60 L Brake cylinders: 4× Type 24 + 4× Type 24/30, levers 165 mm Voltage 24 V (24 V converter required for 12 V towing vehicle) Side reflectors: 4× LED per side + 2× white front reflectors, taillights 2× LED, 2× triangular reflectors Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098 Note on tractor operation: 12→24 V converter as well as ABS/EBS connection (ISO 7638) and power supply (e.g. ISO 1185/12098) required for the onboard hydraulics. Hydraulics (Ramps) 2 cylinders, including changeover valve for operation via the tractor's onboard hydraulics. Fedpfsu Rbzvox Aaxopp Accessories (Selection) 2 toolboxes, 2 wheel chocks (metal), fire extinguisher box Reflectors (side white/yellow; extendable yellow/red), rectangular rear reflectors Lashing eyes: 7 per side + 6 on the platform (10 t per eye) Mud flaps (front/rear), hose/cable holders on the drawbar Paint Finish Sandblasting, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clearcoat Warranty 2 years on frame structure and axles (excluding accidents/operator error) 2 years on electrical and braking systems (excluding wear parts such as brake pads, accidents/operator error) 1 year on paint finish (excluding accidents/operator error) Technical and pricing changes reserved. Images are for reference only and may show optional equipment.

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11-ton Gigant axles * Parabolic springs * Mechanical axle equalisation, front and rear * Tire pressure monitoring with in-cab readout via EBS signal – without truck-side installation * Warning panel kits at front and rear * Side and rear contour marking tape, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V 15-pin power cable and additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, right side * Front closed single plastic mudguard * Straight rear steel mudguards with spray suppression * Lateral underrun protection Fpsdpfx Aaorczm Dexop * Offset extension 500 mm forward * Turntable platform extended by 520 mm to front, with 45° corners, 3 recessed lockable storage compartments incl. lids * Chassis made of high-tensile fine-grained steel * Floor above turntable platform: 50 mm softwood; in low-loader platform: 60 mm softwood * Outer planks of ramps made from 50 mm bamboo * 4 stake pockets per side (no stakes included), each with 2-ton lashing capacity * Load securing package consisting of: 2 x 6.4-ton lashing rings at front left/right on main frame of turntable platform, 1 pair 13.4-ton lashing rings each at front and rear external frame, 4 pairs per side 10-ton pivoting and lowering lashing rings, loadable in all directions and embedded in external frame, 2 pairs 6.4-ton lashing rings in excavator arm rest, 8 pairs galvanized folding extensions for 3m total width (not at rear slope) * Side deck boards for width extension stored in left side storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulically lateral ramp shifting on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loading height loaded: approx. 860 mm (incl. approach slope) * Chassis, turntable, ramps, rear mechanical support feet hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black shade * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 46 / 2025

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning sign packages at the front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additional 12 V – 7+4 pin power cables * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight rear steel mudguards each with spray suppression (anti-spray system) * Side underrun protection * Extended offset bend, 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated, lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform made of 50 mm softwood, and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm bamboo wood * Four side stake pockets each side (stakes not included), each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 x 6.4 t lashing eyes (left and right front on main frame of the turntable platform), 1 pair 13.4 t lashing rings on the outer frame at front and rear, 4 pairs 10 t lashing rings on each side, swiveling and lowerable, loadable in every direction and integrated in the outer frame, 2 pairs 6.4 t lashing rings on the excavator arm rest area, 8 pairs zinc-plated fold-out outriggers for 3 m overall width (not on rear ramp slope) Fpodpfxel Th Evo Aaxep * Widening planks stored in compartment on left side * Excavator arm rest area above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at the rear * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulically lateral ramp adjustment on sliding tube from ramp shaft * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, ramps, and rear mechanical folding supports hot-dip galvanized * Axles, springs, air tanks, and turntable painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 46 / 2025