Used low loader trailer / lowboy trailers for sale (534)

Condition: used, maximum load weight: 2,680 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 04/2022, next inspection (TÜV): 04/2026, loading space length: 3,750 mm, loading space width: 1,850 mm, loading space height: 270 mm, total width: 2,453 mm, total height: 2,020 mm, Year of construction: 2022, Humbaur HS 353718 * Construction machinery transport trailer * Transport trailer * Aluminum floor * 100 km/h approval * Year of manufacture: 2022 * EZ: 05.04.2022 * HU: 05-2026 * Weight: 820kg * Total weight: 3500kg * Payload: 2680kg * Overall dimensions: 5730mm x 2453mm x 2020mm * Internal dimensions: 3750mm x 1850mm x 270mm * Tires: 14 inches * Welded side wall/frame construction * Bolted V-drawbar, hot-dip galvanized * 13-pin plug and reversing light * Hot-dip galvanized steel ramps * Ramp 1500 with anti-slip Grid covering and integrated support feet * Lashing rings mounted in the outer frame 12 pieces (6 pairs), tensile force 1000 kg per lashing ring * Fully automatic support wheel * Walkable steel fenders that close with the side walls The VAT is deductible. ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to delivery, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. Dedpfx Ajvm R S Ssk Tecl For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, empty load weight: 4,800 kg, maximum load weight: 14,200 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 400 mm, suspension: air, tire size: 235/75 r17,5 zoll, wheelbase: 1,400 mm, Year of construction: 2024, Equipment: ABS, HUMBAUR 19 t construction machinery transporter, tandem low-bed trailer with TWIN TIRES LOADING AREA SLOPED IN THE REAR AREA HBTZ 196524 BS / Hot-dip galvanized / Aluminum side walls with CENTER RAILS Chassis frame hot-dip galvanized Aluminum side walls, ANODIZED, with GALVANIZED CENTER RAILS HOT-DIP GALVANIZED STEEL front wall INCLUDED: - SAF axle LOW-LOADER AXLES - SPRING-LOADED RAMP LIFTER EQUIPMENT: •AIR SUSPENSION with lifting and lowering function •SAF low-loader axles •TWIN TIRES 235/75 R17,5 Dodpfx Akefi D Epj Tecl •EBS Electronic Braking System •6 pieces of 10 t lashing eyes recessed in the floor •14 pieces of 2 t lashing eyes recessed in the outer frame •Front support: reinforced 25 t (static) geared support jack with load and fast gear •Rear support: 2 folding supports on the chassis frame •Access ramps approx. 3,100 mm long and approx. 750 mm wide, laterally movable, hot-dip galvanized •Floor with wooden surface and STEEL tread plate over the wheels •WOOD SURFACE in the access ramps •SPRING-LOADED RAMP LIFTER •ALUMINUM SIDE WALLS with galvanized CENTER RAILS •HOT-DIP GALVANIZED STEEL front wall •Low loading height: only approx. 960 mm •Continuously adjustable drawbar •Coupling height approx. 800 - 1,000 mm •DIN - drawbar eye Ø 50 mm •Loading area sloped in the rear area •Fenders with anti-spray system Optionally, we offer you the following at an additional cost: •Plastic toolbox under the loading area •Additional cost: 290,- Euro plus VAT => Freight costs for delivery: 2.90 Euro plus VAT per km => Prices are ex D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL VEHICLE CONSTRUCTION *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale only to commercial customers!* *Pictures may differ and are for general guidance only => may contain/show accessories at an additional cost*

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: Dsdpfx Ael Thymjk Tscl * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye ----General Attachments: * Jost mechanical support winch at front * Two mechanical, hot-dip galvanized folding support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underride guard * Plastic quarter fenders ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Bed: * Net hooks on the sides and rear, fitted to the central locking bearings, plus 2 on the front bulkhead * Steel pallet 3-way tipper body (continuous sidewalls - without center stanchions - foldable with drop-side spring assist) * Rear stanchions bolted * Steel combination swing doors at the rear, asymmetrically split, 2-leaf, can be swung and locked to 270°, not foldable – also equipped with additional swinging frame for automatic tailgate opening during tipping. Locking via galvanized rotary bar lock and central locking system * Deactivation function for automatic tailgate during rear tipping with open swing door * 4 mm steel floor plate * Mounting rails at the rear for loading ramps ----Load Securing: * One 5 ton lashing point in each corner * Four 3 ton lashing rings recessed into the outer frame on each side ----Ramps: * One pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the load area, inset into the chassis, accessible from the rear ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underride guard, mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Other RAL shades for sidewalls available at extra cost * Axles, springs, towing eye, air tanks, and support winch painted black ----Other Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: Djdpfol Th Nnsx Ak Tecl * Drawbar with 50 mm drawbar eye and height adjustment via coil spring and tension lock ----Lighting / Electrical System: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front fender made of molded plastic and rear fender made of straight, galvanized steel sheet, each with splash protection * Toolbox made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control unit for retrofitting the hydraulic side ramp adjustment ----Loading Area: * Above the slewing ring: approx. 1,960 x 2,520 mm & unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unloaded approx. 910 mm (incl. 860 mm approach ramp) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 11,400 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction, with slight preload in the center, turntable with robust ball bearing race, support wedges with holder, quarter-shell fenders in front of and behind each axle. Tie-down points, low-bed trailer: above the front axle: 2 pairs of ring tie-down points, each 5 tons, at the front on the outrigger low-bed: 4 pairs of tie-down points, each 6 tons, on the sides in the low-bed 5 pairs of tie-down points, each 5 tons, between the longitudinal beams Tow hitch, trailer turntable Tow fork with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (Tow fork length 1,700 - 2,300 mm) Axles + Suspension BPW drum brake axles, each 10 tons axle load, spring plates. Axle endurance brake test for 105 km/h, rear axle can be manually removed. Air suspension with raising & lowering valve Wheels and Tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Braking system Dcsdpfxji Ri N Ao Ak Tsl 2-line compressed air brake system, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, rotating beacon with holder, switched via parking lights (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pole tamper-proof plugs at the front, with connecting cable, 1 x 7-pole agricultural plug, voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Steel/diamond plate floor on the outrigger, perforated sheet covering between the longitudinal and transverse beams. Axle cover is not designed to be driven over, widening to 3,000 or 3,300 mm is possible. Operating instructions Note! A special permit is required for a 10,000 kg axle load. The permit must be applied for separately in each federal state; the legislator does not have to give a guarantee for 20 tons GVW. Customer risk. A special permit is required if the overall length of the train exceeds 18,750 mm. Observe country-specific registration regulations. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Observe the BO circle!!! Registration / Signs Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Painting Frame at the front hot-dip galvanized incl. passivation, frame at the rear RAL 9006 silver, tow fork KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: MC 255 133 1350 1 D, empty load weight: 282 kg, maximum load weight: 1,068 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 500 mm, Installed accessories -Two roof racks 150 kg load capacity (distributed). Dropside, railing and co. 35 cm high double-walled anodized drop sides -folding and removable anodized aluminium rear wall -robust fasteners with double action -sturdy front wall -stable and durable hinges -easy to clean thanks to intelligent side panel profile Lid -Aluminum lid with durable GRP plate Splash-proof -Lid with damper-supported lifting aid -lockable lid -two sturdy luggage carriers with 150 kg load capacity (distributed) -Mounting of bicycle racks possible Chassis and frame -Fully supported floor -Quad-tube drawbar -Towing ball coupling with safety indicator -Support wheel with reinforced clamp Loading area and floor Dcjdpfx Akep Nzkwe Tsl -Continuous, anti-slip and waterproof screen-printed wooden floor -15 mm thick -Finnish birch plywood Lighting equipment -modern multifunctional lighting -with reversing light -with rear fog light -with two marker lights -13-pin plug Wheels and axles -robust rubber spring axle -with automatic reverse -maintenance-free compact wheel bearings -Plastic mudguards -wheel chocks with bracket Lashing and securing options -6 retractable lashing points, 400 daN Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Dcjdpfx Akopk Dv Re Tol * Air suspension ----Drawbar / Flanged Towing Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized foldable rear supports * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation for the retrofit of container locks in front of the front wall * Bolted smooth steel front wall * Fold-down sidewalls made from trapezoidal steel sheeting with board hoist * Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use * Bolted rear stakes * Rear slope approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various 1.2 t lashing options in the front and rear cross-members ----Ramps: * Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Sideboard color in RAL 9010 pure white * Sidewall painting in another RAL color available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, empty load weight: 120 kg, maximum load weight: 630 kg, overall weight: 750 kg, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, tire size: 155/70R13, Small and maneuverable car trailer from trailer manufacturer TEMARED. The ECO2010KIPP open box trailer is ideal for private transportation and small loads. Djdpjq Sly Uefx Ak Tecl Garden waste, small furniture - everything you need for private or small commercial use. You can set up the trailer and fold down the drawbar to make it easier to store. The standard equipment of the steel trailer includes a support wheel, locks, galvanized side walls and a fold-down V-drawbar. This model is also available in different versions, for example as a cover trailer or tarpaulin trailer. We also offer trailer accessories such as attachments, tarpaulin and frame, flat tarpaulin, drawbar box and rear supports.

Condition: used, empty load weight: 300 kg, maximum load weight: 1,050 kg, overall weight: 1,350 kg, loading space length: 2,510 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, tire size: 195/70r14c, Sturdy, braked low-loader with a high cover, manufactured by ANSSEMS, model BSX1350 251x130. As standard equipment, the Anssems covered trailer with brakes features aluminum sideboards, a cover and frame, internal locking mechanisms, external lashing points, profile channels for mounting accessories or securing the load, a very stable welded steel frame, side rails, a front headboard, a front flap, pull-out supports for the tailgate, a support wheel, and a V-drawbar. Dcjdsgf Nxzspfx Ak Tjl We also offer accessories for Anssems car trailers, such as a flat cover, net hooks, a corrugated grid attachment, a sideboard attachment, a rear support set, a toolbox, lashing points, lashing straps, and a lock. --- You can find all our cost-effective offers on our website. Germany-wide delivery is possible (except for the islands)! Please ask us for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday – hours Pick-up is not possible on Saturdays!

Condition: new, maximum load weight: 608 kg, overall weight: 750 kg, loading space length: 2,100 mm, loading space width: 1,110 mm, loading space height: 350 mm, immediately available additional accessories available upon request: headboard gallery flat cover tarpaulin and bows box extension Djdpfx Aksizg N Ss Tjcl

Condition: new, empty load weight: 4,800 kg, maximum load weight: 16,200 kg, overall weight: 21,000 kg, loading space length: 6,540 mm, loading space width: 2,540 mm, loading space height: 870 mm, suspension: air, tire size: 235/75 r 17,5, Year of construction: 2026, Equipment: ABS, Air suspension with raising and lowering function SAF low-loader axles Twin tires 235/75 R 17.5 EBS electronic braking system 6 pieces of 10-ton lashing points recessed in the floor 14 pieces of 2-ton lashing points in the outer frame Gear-supported winch with load and fast gear Rear support: 2 folding supports on the chassis frame Loading ramps approximately 3100 mm long and approximately 750 mm wide Laterally adjustable Bridge deck with wooden surface and steel checker plate Dcodpfx Aei Dqn Rok Tel Over the wheels Wooden surface in the loading ramps Spring-loaded ramp lifter Aluminum side walls with center supports Hot-dip galvanized steel front wall Infinitely adjustable drawbar Coupling height approximately 800 - 1000 mm DIN drawbar eye d= 50 mm Loading area sloped in the rear area Fenders with anti-splash system Additional features available upon request Collection from the factory or delivery Price per KM: 2.90 Euro

Condition: new, functionality: fully functional, empty load weight: 602 kg, maximum load weight: 2,098 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,150 mm, tire size: 10, tire condition: 100 %, maximum speed: 100 km/h, Year of construction: 2026, Scope of delivery: 1x car transporter trailer with winch and tilting function, 2.7t Description: Car transporter trailer equipped with winch, tilting function, and loading ramps. The pre-installed winch, with a cable length of 12m, allows for convenient loading and transport of vehicles that are no longer operational. The tilt function combined with additional loading ramps enables vehicles to be driven onto the trailer at a low approach angle. This facilitates the loading of vehicles with low ground clearance. The ramps are adjustable and securely stored under the loading platform with a safety catch. Winch: Length: 12 meters Pulling force: 1135 kg / 2500 lb Technical specifications: Dsdpeu A Aydefx Ak Tscl - Tiltable - Braked - Automatic jockey wheel - Plastic wheel chocks with holders - With winch - Plug holder - Welded frame Gross weight: 2700kg Plug type: 13-pin Unladen weight: 608kg Payload: 2092kg Overall length: 5556mm Overall width: 2150mm Overall height: 770mm Load area length: 4052mm Load area width: 2105mm Jockey wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorbers: No (Optional: €199 surcharge for 100km/h upgrade) Rail dimensions: Width: 30 cm Length: 120 cm

Condition: new, empty load weight: 120 kg, maximum load weight: 630 kg, overall weight: 750 kg, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 700 mm, tire size: 155/70R13, Small and maneuverable car trailer from trailer manufacturer TEMARED. The ECO2010KIPP open box trailer is ideal for private transportation and small loads. Dedeuhl Rtjpfx Ak Tocl Garden waste, small furniture - everything you need for private or small commercial use. You can set up the trailer and fold down the drawbar to make it easier to store. The standard equipment of the steel trailer includes a support wheel, side wall attachment, flat tarpaulin, locks, galvanized side walls and a fold-down V-drawbar. This model is also available in different versions, for example as a cover trailer or tarpaulin trailer. We also offer trailer accessories such as tarpaulin and frame, drawbar box and rear supports.

Condition: new, functionality: fully functional, empty load weight: 666 kg, maximum load weight: 2,332 kg, overall weight: 3,000 kg, loading space length: 5,070 mm, loading space width: 2,110 mm, loading space height: 350 mm, tire size: 10, Year of construction: 2026, Scope of delivery: 1x car trailer high loader aluminum drop sides 507x211cm 3000kg Description: Multifunctional trailer in a class of its own! The trailer has aluminum side walls for transporting a wide variety of goods. In addition, a cable winch is fitted as standard, which you can use for support. Access rails are safely stowed under the transport area. The lashing eyes on the sides allow you to lash your transported goods easily and quickly at any time. Technical data: - Automatic support wheel - Aluminum drop sides - Cable winch - Drive-on ramps - Lashing eyes - Wheel chocks with bracket Total weight: 3000kg Tare weight: 666kg Payload: 2332kg Length of the cargo bed: 5070mm Width of the loading area: 2110mm Overall width: 2150mm Overall length: 6570mm Overall height: 890mm Dropside height: 300mm Side wall material: aluminum Manufacturer: Martz Type of trailer: Box trailer Type of suspension: Rubber spring axle Type of drawbar: V drawbar Floor: Screen-printed floor Dcjdpfx Aouyt Rbsk Tol Wheels: 195/55 R10C Frame type: Welded Frame material: Steel Purpose: Universal

Condition: new, functionality: fully functional, machine/vehicle number: STL1300, maximum load weight: 1,055 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,280 mm, loading space height: 350 mm, tire size: 13, Year of construction: 2026, STL 1300 trailer with multifunctional equipment: Folding and removable rear wall with durable and high-quality corrosion protection Side walls made of sheet steel with Galvalume (aluminum-zinc coating), single-walled with robust angle lever locks Fixed front wall 35 cm high fitted hook-in knobs for attaching tarpaulins and nets optimum road holding thanks to test track-tested chassis with STEMA safety V-drawbar Towing ball coupling with safety indicator Partially hot-dip galvanized bolted chassis Djdpfouw Sqnex Ak Tjcl Continuous, anti-slip and waterproof screen-printed wooden floor 12 mm thick Additional cross beams for floor support Modern multifunctional lighting with reversing light with rear fog light 13-pin plug, EC equipment marker lights Robust rubber spring axle with independent wheel suspension Maintenance-free compact wheel bearings Impact-resistant plastic mudguards Equipped with splash guards Wheel chocks with bracket 6 recessed lashing brackets, integrated into the frame on the cargo bed Technical data: Total weight: 1300kg Payload: 1055kg 373 x 177 x 90 External dimensions (L x W x H cm) 251 x 128 Box dimensions (L x W x H cm) Tires (inch): 13 Brake: YES Support wheel: YES Shock absorber: No (surcharge: 109,- Euro for 100km/h extension) Maximum speed: 80 km/h

Condition: new, maximum load weight: 23,600 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, * Humbaur HTD 308525 * New vehicle * Low loader * GVW: 30,000 kg * Unladen weight: 6,400 kg * Payload: 23,600 kg * Overall dimensions: 10,780 mm x 2,540 mm x 3,780 mm * Internal dimensions: 6,500 mm x 2,520 mm * Loading height: 890 mm * Tyres: 12 x 235/75 R17.5 * Ramp angle 10 degrees * Parabolic or air suspension * 24V EBS braking system * 24V electrical system * Heavy-duty welded construction from fine-grain steel * Warning panel (4-way) * Rotating beacons * 3 pairs of 10-tonne lashing rings recessed in the low bed * 2 pairs of 10-tonne lashing rings recessed in the gooseneck * 4 pairs of 3.0-tonne lashing rings on the outer frame * 4 pairs of 2.0-tonne lashing rings above wheel arches * 50 mm softwood floor * Chassis frame and bogie hot-dip galvanized in immersion bath * One-piece hot-dip galvanized loading ramps * We are happy to provide a tailored quote * Several vehicles in stock * Also available in other sizes and weight classes ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as we offer this item on other portals as well. We strongly recommend inspection and examination to avoid any misunderstandings about the condition or suitability. Inspections and examinations can be arranged at any time by appointment and are expressly encouraged!!! Images similar; may include optional accessories at additional cost. Stated internal dimensions are approximate. For new vehicles, additional costs for freight and documents may apply. TRADE-INS ACCEPTED FOR ALMOST ANYTHING!!! PART-EXCHANGE AND CASH-UP DEALS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Dcedetyh Dpspfx Ak Tol Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, maximum load weight: 16,700 kg, overall weight: 22,000 kg, axle configuration: 3 axles, first registration: 05/1964, next inspection (TÜV): 02/2026, loading space length: 7,400 mm, loading space width: 2,500 mm, loading space height: 1,060 mm, total width: 2,500 mm, * Bunge 3- Achs Tieflader mit Radmulden * Typ TL 16 Z * 22000 kg GG * 40 ziger Zugöse * Zuggabel verlängerbar * Zuggaabl mit Federunterstützung Dcjdpfx Akow Nz Uge Tsl * Duomatik * BPW Achsen * Manuelle Auffahrrampen * Rampen ca. 1,75 m L x 0,58 m B * Radmulde vorne ca 2 m Lang + schräge 1,15 m * Radmulde ca. 0,88 m H * Staumulde * Vorrüstung für Rundumlicht * LED Beleuchtung * Warntaffeln * Federung: Blatt/Blatt/Blatt * Reifen 7.50R15 ca. 70-60-60% * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: new, maximum load weight: 20,500 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower function including RTR feature * 1st axle liftable * Last axle as trailing steering axle with electro-pneumatic steering lock activated via reverse gear PIN (lockout of the trailing axle from driver's cab for maneuvering - no truck-side installation required - assigned to PIN 10 of the 15-pin connector; for maneuvering purposes only, not for public road use) * SmartBoard control box as infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Fixed center drawbar with 50 mm flanged towing eye (900 mm when loaded, height adjustable at the head plate) * Mechanical support winch in front, mechanical swing-down supports at the rear of chassis * Mechanically adjustable warning sign package front and rear * Toolbox made of galvanized steel sheet - black powder coated - approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous sidewalls (without center stanchion) up to the approach ramp * Folding rear stanchions * Steel rear wall inserted in front of rear stanchions * 15-pin power connector * LED taillights * LED revolving beacon (removable), incl. bracket and installation * 2 x LED reversing lights at the rear of vehicle (activated by reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir flooring * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45° chamfered with provisions for mounting 3 t folding lashing brackets * 1 x 10 t lashing ring in each corner; additionally, 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in front and rear cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways Djdsr Dpz Aepfx Ak Tjcl * 4-way hydraulic control block for optional retrofitting of hydraulic ramp displacement * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate fully hot-dip galvanized * Axles, air tanks, flanged towing eye, and front support winch painted in black * Hydraulic flow divider in trailer (for hydraulic pump capacity in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and interim sales excepted * Immediately available ex Egestorf

Condition: new, empty load weight: 6,600 kg, maximum load weight: 17,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6600kg, permissible total weight: 24000kg, loading space length: 6,500 mmTire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, 3 axle low loader trailer with offset DTS-S 300 - bogie with strong ball bearing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - 1 spare wheel, same make as basic tires, steel rim - 1 plastic tool box - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks in the middle of the low load area - wooden planks 70mm for extension to 3000mm Lashing eyes low loader: - with spring jack Support axles + suspension: - SAF - drum brake axles - Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Brake system: - 2-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 volt, multi-chamber lights, yellow LED lighting on the side - 1 LED rotating beacon with holder, switched via parking light (light removable) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm Floor: - Storage box embedded in the crossing slope to the crank - then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area - Rear bevel with 70 mm softwood floor Loading ramps: Steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - - 1 pair of ring lashing eyes embedded on the crank at the front, 10 tonnes - 4 pairs of lashing holes in the AR with 5 tonnes each for tensioning belt attachment - 7 pairs Lashing eyes at the top and sides of the outer frame, 10 tonnes each - 1 x at the front on the crank, 6 x in the low bed - 5 pairs of stake pockets in the outer frame, inside 70x40 mm (can be converted to 5 tonne ring lashing eyes for an additional charge) - 2 pairs of additional folding lashing eyes, 10 tonnes each, 1x at the front on the crank, 1x behind the 3rd axle, axles + suspension: - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical Ac Dcjdjtcwkrepfx Ak Tel

Condition: used, maximum load weight: 2,680 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 06/2017, next inspection (TÜV): 02/2026, loading space length: 3,630 mm, loading space width: 1,800 mm, loading space height: 300 mm, Unsinn UBA 3536-14-1800: Internal dimensions: 3.63 m L x 1.80 m W x 0.30 m H Djdpfx Akoxdpuvo Tjcl * 3500 kg permissible total weight

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: Djdexf Skpepfx Ak Tjcl * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, functionality: fully functional, empty load weight: 340 kg, maximum load weight: 410 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 400 mm, tire size: 13 Zoll, trailer brake: trailer unbraked, *NEW VEHICLE* Brenderup CLICK & COLLECT 2300SUB750 750 kg gross permissible weight 340 kg unladen weight 410 kg payload Internal box dimensions: 3010x1530x400 mm Overall dimensions: 4230x1970x940 mm Loading height: 620 mm Single axle 13-inch tyres Steel sheet side walls Dodpfx Akoxrf Dce Tecl Front and rear side panels foldable Tipping function Jockey wheel mounted 8 lashing points inside 4 lashing hooks outside Tarpaulin buttons High-quality side wall locks that securely fasten the side walls Anti-slip multiplex wooden floor Trade-in: We are happy to accept your trailer in part exchange. Please contact us, or send us photos and vehicle details. Delivery: Upon advance payment, delivery of your trailer can be arranged. The cost is €1.60 per kilometre (distance Bielefeld to your destination) including VAT. We also offer the following services: - Service - Workshop - TÜV (technical inspection) - Tyres and wheels - Tarpaulins and frames - Custom fabrication in our metalworking shop - Rental We always have approx. 400 trailers in stock! We look forward to your visit. Office, workshop, technical inspection, spare parts, rental and showroom Senner Hellweg 187 33689 Bielefeld

Condition: used, maximum load weight: 2,100 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 04/1996, Ref.-No.: B - 11 Dsdpfoxvf Upox Ak Tscl On behalf of customer Beyer * BMH 30.4 * Low loader * Ramps * 2-axle * Permissible total weight 3,000 kg * TRAILER HITCH ball coupling * Good condition, little used Trade-in possible Financing from 3.99% Subject to errors and prior sale! The details in this advertisement are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed equipment must be verified separately. All information in the listings is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: new, functionality: fully functional, empty load weight: 146 kg, maximum load weight: 604 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,640 mm, loading space width: 1,260 mm, loading space height: 300 mm, Year of construction: 2026, Scope of delivery: 1x Martz car trailer 264x126cm with tipping drawbar and jockey wheel, 750kg Description: Dcjdpfx Aksxpimpo Tel The trailer is equipped with a V-type tipping drawbar, ensuring exceptional stability while driving. The chassis is constructed from bent profiles made of galvanized steel sheet, bolted together for durability. The running gear is based on a torsion axle from a renowned manufacturer, featuring independent suspension on a torsion bar. The tires fitted are 155/70 R13. The side walls are made of galvanized steel sheet. The rear of the trailer can be opened quickly and effortlessly. Load area: constructed from high-quality, waterproof, non-slip phenolic plywood, 9mm thick. Technical specifications: - Tipping drawbar - Jockey wheel Gross weight: 750kg Unladen weight: 146kg Payload: 604kg Load area length: 2640mm Load area width: 1260mm Overall width: 1690mm Overall length: 3540mm Overall height: 800mm Side wall height: 300mm Side wall material: galvanized steel Manufacturer: Martz Trailer type: box trailer Suspension type: rubber torsion axle Drawbar type: V drawbar Floor: phenolic plywood (9mm thick) Wheels: 155/70 R13 Frame type: bolted Frame material: steel Applications: gardening, household use, moving/furniture transport, goods transport, and much more. The Martz car trailer is the reliable choice for all your transportation needs. If you choose 'self-collection', we are happy to send the vehicle documents to you in advance free of charge!

Condition: new, functionality: fully functional, empty load weight: 425 kg, maximum load weight: 1,075 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 3,610 mm, loading space width: 1,900 mm, tire size: 10", tire condition: 100 %, Year of construction: 2026, Scope of delivery: 1x Car transporter with winch and tilting function 1500kg Description: Car transport trailer equipped with a winch, tilting function, and loading ramps. Thanks to the pre-installed 12m winch, you can easily load and transport vehicles that are no longer drivable. The tilting feature, combined with additional loading ramps, allows for a low approach angle. This facilitates trouble-free loading of vehicles with low ground clearance. The ramps are adjustable and securely stowed beneath the load platform with locking mechanism. Technical data: - Tiltable - Braked - Plastic wheel chocks with holder - With winch Dsdpfx Aox Dm Iysk Tjcl - Plug holder - Welded frame Gross weight: 1500kg Plug type: 13-pin Unladen weight: 425kg Payload: 1075kg Overall length: 5150mm Overall width: 2040mm Overall height: 800mm Load platform length: 3610mm Load platform width: 1900mm Jockey wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorbers: No (Available as an option: €109 for 100km/h upgrade)