Used Humbaur Low Loader / Lowbed Trailers for sale (589)

Condition: new, maximum load weight: 8,200 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 350 mm, Year of construction: 2024, Equipment: ABS, * Drum brakes * Ramps, spring-supported and laterally adjustable * Frame completely hot-dip galvanized * 16 lashing points on the loading platform * Loading height approx. 700 mm * Drawbar, height-adjustable * Trailer immediately available * Technically permissible total weight 11,900 kg with a payload of 9,450 kg * Suspension: leaf spring * Payload: 8,200 kg * Tires: 235/75R17.5 Fpedpfeh Rlx Dsx Aa Eok ---Information is non-binding - Errors and omissions excepted - Subject to prior sale.

Condition: new, maximum load weight: 5,600 kg, overall weight: 7,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,000 mm, loading space height: 330 mm, Year of construction: 2024, Equipment: ABS, * Drum brakes * Ramps spring-supported & can be moved sideways * Frame completely hot-dip galvanized * 18 lashing rings recessed in the bridge floor * Loading height approx. 630 mm * Height-adjustable tow arm Fpsdpfsmw U Abex Aa Esk * Trailer available immediately * Suspension: leaf * Payload: 5,600 kg * Tires: 215/75R17.5 ----Information non-binding - errors not excluded - sale reserved

Condition: new, maximum load weight: 7,700 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, * Drum brakes * Ramps spring-supported & can be moved sideways * Frame completely hot-dip galvanized * 20 lashing eyes on the loading area * Loading height approx. 920 mm Fpsdpfx Aaeq A A Nzj Eek * Height-adjustable tow arm * Trailer available immediately * Technically permissible total weight: 11,900 kg with payload 9,100 kg * Suspension: leaf * Payload: 7,700 kg * Tires: 235/75R17.5 ----Information non-binding - errors not excluded - sale reserved

Condition: new, maximum load weight: 16,200 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, loading space height: 870 mm, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2026, Equipment: ABS, Humbaur HBTZ 217224 BS * New vehicle * Tandem low-bed trailer * Galvanized * Air suspension * Lift axle * Construction machinery transporter * Year of manufacture: 2026 * Gross weight: 21,000 kg * Unladen weight: 4,800 kg * Payload: 16,200 kg * Overall dimensions: 9,400 mm x 2,550 mm x 3,710 mm * Internal dimensions: 7,250 mm x 2,540 mm * Loading height: 870 mm * Tyres: 12 x 235/75 R17.5 * Ramp angle: 13 degrees * Galvanized drawbar * Standard twin tires * 15-pin plug connector * Reinforced lashing points * 12 t geared support winch * Galvanized steel loading ramps * EBS braking system with stability program * 24 V lighting system (multi-chamber tail lights) * Heavy-duty, welded and hot-dip galvanized chassis * Softwood flooring * Steel mudguards * 2 wheel chocks * Toolbox Optional accessories available upon request! For new vehicles, additional costs for freight and documentation may apply. Fsdet Aubrepfx Aa Eepk TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday ? Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 23,600 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, * Humbaur HTD 308525 * New vehicle * Low loader * GVW: 30,000 kg * Unladen weight: 6,400 kg * Payload: 23,600 kg * Overall dimensions: 10,780 mm x 2,540 mm x 3,780 mm * Internal dimensions: 6,500 mm x 2,520 mm * Loading height: 890 mm * Tyres: 12 x 235/75 R17.5 * Ramp angle 10 degrees * Parabolic or air suspension * 24V EBS braking system * 24V electrical system * Heavy-duty welded construction from fine-grain steel * Warning panel (4-way) * Rotating beacons * 3 pairs of 10-tonne lashing rings recessed in the low bed * 2 pairs of 10-tonne lashing rings recessed in the gooseneck * 4 pairs of 3.0-tonne lashing rings on the outer frame * 4 pairs of 2.0-tonne lashing rings above wheel arches * 50 mm softwood floor * Chassis frame and bogie hot-dip galvanized in immersion bath * One-piece hot-dip galvanized loading ramps * We are happy to provide a tailored quote * Several vehicles in stock * Also available in other sizes and weight classes ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as we offer this item on other portals as well. We strongly recommend inspection and examination to avoid any misunderstandings about the condition or suitability. Inspections and examinations can be arranged at any time by appointment and are expressly encouraged!!! Images similar; may include optional accessories at additional cost. Stated internal dimensions are approximate. For new vehicles, additional costs for freight and documents may apply. TRADE-INS ACCEPTED FOR ALMOST ANYTHING!!! PART-EXCHANGE AND CASH-UP DEALS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 Fedpfx Astyh Dpea Eepk 58285 Gevelsberg Tel.: Fax:

Condition: used, maximum load weight: 7,618 kg, overall weight: 9,990 kg, axle configuration: 2 axles, first registration: 11/2020, loading space length: 5,000 mm, loading space width: 2,000 mm, loading space height: 250 mm, total width: 2,550 mm, total height: 3,020 mm, Humbauer tandem axle trailer with 2 axles and ramps Type: HS 105020 BS Payload: 7618 kg Material: Aluminum Brakes: Drum brakes Axle: SMB 3x support points 2x ramps (length: 2.30 m and width: 0.45 m) Fpedpfoy Unvcox Aa Eek Length: 5.00 m Width: 2.00 m Height: 0.25 m We would also be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale excepted.

Condition: used, empty load weight: 3,170 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2017, next inspection (TÜV): 01/2027, loading space length: 5,300 mm, loading space width: 2,460 mm, loading space height: 400 mm, loading space volume: 5 m³, suspension: steel, tire size: 235/75 R17,5, wheelbase: 980 mm, color: blue, Equipment: ABS, Drum brake Payload: 7,330 kg Aluminum sideboards Fpsdpfx Aozaunuoa Eek BPW axles Errors and omissions excepted.

Condition: new, empty load weight: 6,700 kg, overall weight: 30,000 kg, loading space length: 8,550 mm, loading space width: 2,540 mm, Year of construction: 2026, Equipment: trailer coupling, HTD30K- RM-BM / Air suspension Technical data: Internal dimensions: approx. 8,550 mm x 2,540 mm Overall dimensions: approx. 10,900 mm x 2,540 mm x 3,790 mm Gross vehicle weight: 24,000 kg Payload: approx. 17,300 kg Tires: 235/75 R17.5 ZW inch Loading height: approx. 900 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 800-980 mm Screed length: approx. 3,150 mm Screed width: approx. 750 mm Permissible total weight special gen.: 30,000 kg Payload special gen.: approx. 23,300 kg Drop deck length: approx. 6,500 mm Overall dimension (B dimension): 10,800 mm Total weight (technical): approx. 33,000 kg 8 pairs of lashing rings, 3,000 kg per lashing point Lashing rings in the outer frame 3 pairs of lashing rings, 10,000 kg per lashing point Lashing rings in the drop deck, recessed 2 pairs of lashing rings, 10,000 kg per lashing point Lashing rings in high bed, recessed 4 pairs of lashing rings, 2,000 kg per lashing point Over wheel cut-out 2nd and 3rd axle 7 pairs of lashing rings, 3,000 kg per lashing point Stake pocket (90x50 mm) with lashing option Standard equipment: Fsdpfx Asq Ulaqoa Ejpk Axles Low loader axles from renowned manufacturers Suspension Air suspension unit including lifting and lowering acting on rear axle unit Brake system Brake system in accordance with EC directives with EBS 4S/3M in multi-voltage version (12-24V), spring-applied parking brake incl. 2 test connections pulled outwards for brake/modulator and bellows pressure Electrical system LED lighting with flashing function for side marker lights, multi-voltage (12-24V) Bogie Solid welded construction with low-maintenance ball bearing slewing ring Draw gear Drawbar with 8° inclined drawbar eye Ø40 mm, height-adjustable Low-maintenance silent bushes Frame Solid welded construction made of high-strength fine-grained steel Extended cross members for maximum stability Wheel recesses at the front (top length approx. 2,170 mm) and rear (top length 1,280 mm), depth 330 mm Excavator recess (length 2,090 mm, width 750 mm, depth 185 mm) Maximum safety during loading and unloading Floor 50 mm softwood flooring Ramps One-piece hot-dip galvanized drive-on ramps (3,100 mm x 750 mm) with 50 mm softwood decking, can be moved sideways Direct-acting vertical spring jacks for easy operation Optimum securing with turnbuckle and counter stop Finishing Hot-dip galvanized chassis and bogie frame Support 2 folding supports at the rear left and right at the rear of the vehicle Equipment Folding side collision protection Other equipment Retroreflective line markings in accordance with ECE Directive R48, white at the sides and red at the rear front admulden cover with 2 pairs of stanchion pockets, without lining (cover can be lowered under the side rails) Hardwood lining for RM front covers Wheel well cover Hardwood lining for rear RM cover Front storage box at the top of the plateau, with hinged cover Size approx. L 700 x D 810 x H 140 mm Warning package LED HTD cranked Aspöck warning signs 4-fold, electrics and rotating beacon 3 m equipment package without upward slope for HTD30K wheel wells with 6,500 mm drop deck Folding boom with spruce planks for the straight part of the drop deck Basic hydraulics for trucks with rear connection, Operating pressure max. 200 bar and up to 150 l/min with 2-circuit hydraulic connection and return line with SVK BG3 quick coupling connection Hydraulic ramp displacement laterally by approx. 300 mm in each case Hydraulic ramp lift for 1-part ramps Hydraulic support legs left

Condition: new, functionality: fully functional, Year of construction: 2025, HS 105020 BS 10145 / SMB with grating in the ramps ++ Delivery possible, freight costs upon request ++ Technical specifications: Loading height: 705 mm Drive-on angle: 16° Tires: 235/75R17.5 Equipment: ABS Chassis frame incl. SIDE WALLS AND TOW TUBE HOT-DIP GALVANIZED STRONG SMB AXLES WITH SOLID PARABLIC SUSPENSION AXLE UNIT WITH LOAD BALANCING 4 RECESSED AND FORGED LASHING POINTS IN THE CORNERS 12 LASHING BRACKETS INTEGRATED IN THE OUTER FRAME CONTINUOUSLY HEIGHT-ADJUSTABLE TOWING DEVICE RAMPS WITH STABLE, HOT-DIP GALVANIZED STEEL GRID FOR SUPER GRIP TAIL LIGHTS PROTECTED AND INTEGRATED IN THE UNDERRUN PROTECTION EXTRA HIGH CORNER RAILS FOR SECURE HOLD OF THE RAMPS STABLE, HOT-DIP GALVANIZED STEEL FENDERS 2 FOLDING AND TELESCOPIC REAR JACK LEGS ALUMINUM SIDE PROTECTION FROM THE BEGINNING OF THE LOAD BED TO THE 1ST AXLE - SOLID GEARBOX JACK WINCH WITH LOAD AND HIGH GEAR LOW LOADING HEIGHT Fpodpfswkt Hlox Aa Eok 235/75 R17.5 INCH TIRES and much more... Loose accessories available as an option. - - All information without guarantee - - Images may vary - -

Condition: used, empty load weight: 10,860 kg, maximum load weight: 37,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Rubber surface, two-part ramp with grating, ramps spanning the entire width, electro-hydraulic pump for ramps or connection to the truck's hydraulic system. -- Subject to printing errors, errors and changes. Sample images. -- More details can be found at: !, More Details: ! Fpjdpfx Aaozrqlfs Eok

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. Fsdpfxeyfvg Ao Aa Eopk ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, total width: 2,540 mm, total height: 3,780 mm, Year of construction: 2026, Equipment: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low loader * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630mm x 2,540mm x 3,780mm * Internal dimensions: 12,000mm x 2,540mm * Loading height: 890mm * Fifth wheel height: 1,230mm * Fifth wheel platform: 3,500mm * Low bed: 8,680mm * Gross weight: 48,000kg * Payload: 38,000kg * Tyres: 235/75R17.5 * SAF low-loader axles with lift and trailing steering axle * Air suspension with raise/lower function * Twin tyres * EBS brake system * 24-volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch kingpin * Chassis frame hot-dip galvanized by immersion * Heavy-duty, welded chassis frame * Climbing strips on the ramp incline * 50mm softwood floor * Recess for excavator arm * 3m equipment package * Steel toolbox under the loading platform Fpodpfx Ajr Ic Rwsa Esk * Gooseneck with 400mm front wall * 400mm aluminium side drop-down boards * Front storage box with lid * 3 pairs of 6t lashing rings * 3 pairs of 3t lashing rings * 5 pairs of 10t lashing rings * 6 pairs of 3t lashing rings * 6 pairs of 2t lashing rings * Ramps with rubber covering * Spare wheel with holder on the front wall * LED reversing lights * Visible surface painting available upon request * Further equipment options possible upon agreement ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right of prior sale, as this item is also listed on other platforms. We strongly recommend a viewing and inspection to ensure the buyer has a clear understanding of the condition and suitability of the trailer. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! The internal dimensions provided are approximate. For new vehicles, additional costs for freight and documentation may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:00 to 17:00, Saturday 8:00 to 14:00 Always over 500 new and used trailers in stock!!! Tel.: Fax:

Condition: as good as new (ex-display), empty load weight: 10,000 kg, maximum load weight: 30,000 kg, overall weight: 40,000 kg, axle configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2025, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible total weight: 24,000 kg Payload: approx. 14,000 kg Tires: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Plank length: approx. 3,150 mm Plank width: approx. 750 mm Permissible total weight (special version): 40,000 kg Payload (special version): approx. 30,000 kg Drop-side length: approx. 6,610 mm Overall dimensions (L x W x H): 11,200 Total weight (technical): approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the drop-side outer frame 4 pairs of lashing points, 3,000 kg per lashing point Lashing/spar pockets, 3 tons in the upper deck outer frame 1 pair of lashing points, 3,000 kg per lashing point Lashing/spar pockets, 3 tons in the drop-side outer frame Suspension Air suspension system including lifting and lowering, acting on the rear axle Braking system Braking system according to EC guidelines with EBS 4S/3M in multi-voltage version (12-24V), spring brake parking brake incl. 2 test connections drawn to the outside for brake/modulator and air spring pressure Electrical system Lighting in LED version with flashing function for side marker lights, Multi-voltage (12-24V) Turntable Solid welded construction with low-maintenance ball bearing race Coupling device Curved drawbar with towing eye Ø 50mm, low-maintenance silent blocks including height adjustment for the drawbar Frame Solid welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel arches at the front (length at the top approx. 2,500 mm - depth approx. 410 mm) and at the rear (length at the top approx. 1,470 mm - depth approx. 370 mm); without wheel arch covers Excavator well (length 1,650mm, width 750mm, depth 190mm) Wheel cutouts above the rear wheels with wheelbase 2,010, corners beveled at the front, Fpjdpfsiciutjx Aa Esk climbing strips on the rear of the ramp for maximum safety during loading and unloading 4 pairs of spar pockets (90x50)mm in the outer frame - upper deck 1 pair of spar pockets (90x50)mm in the outer frame - drop-side Floor 50 mm softwood decking (painted/impregnated) Ramps One-piece, hot-dip galvanized ramps (3,150mm x 750mm) with 50 mm softwood decking (painted/impregnated), laterally displaceable, direct-acting spring lifts for easiest operation Finishing Chassis frame hot-dip galvanized Supports 2 folding supports at the rear left and right at the vehicle rear Equipment Folding side guard, at the front, semi-circular plastic mudguards - at the rear, straight steel mudguards with anti-spray flaps, 2 wheel chocks with holder; contour marking according to ECE directive R48 Wheel arch cover at the front with 3 pairs of spar pockets, without covering (cover can be recessed under the longitudinal beams) 975.00888 Hardwood covering for RM cover at the front Wheel arch cover at the rear with 1 pair of spar pockets, without covering (cover can be recessed under the longitudinal beams) 975.00897 Hardwood covering for RM cover at the rear 3 pairs of lashing rings 6 tons, bolted 3 m equipment package without ramp, W=11200 Folding outrigger with softwood planks 970.04199-36 Warning package LED HTD curved Aspöck warning signs 4-way, electrical system and rotating beacon 1 pair of storage compartment for wooden planks, 3m packa

Condition: new, empty load weight: 1,700 kg, maximum load weight: 4,800 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 4,500 mm, loading space width: 2,000 mm, loading space height: 330 mm, suspension: other, tire size: 215/75 r17,5 zoll, wheelbase: 850 mm, Year of construction: 2023, HUMBAUR construction machinery tandem low-bed trailer HS 654520 BS INCLUDES ALUMINUM loading ramps at the rear HOT-DIPPED GALVANIZED CHASSIS FRAME Equipment: •Permissible total weight 6,500 kg •Payload approx. 4,800 kg •Loading area approx. 4,500 x 2,000 mm •Loading ramps made of ALUMINUM Fedpfjhmm Rrox Aa Espk •Drawbar continuously adjustable in height •Automatic support wheel •6 pieces of 3 t lashing points (in the corners) •10 pieces of 2 t lashing points recessed in the outer frame •2 adjustable support legs on the loading ramps •2-circuit compressed air ABS braking system •Steel sheet mudguards •Bridge deck made of softwood planks •Chassis frame hot-dip galvanized •Tires 215/75 R17.5 Your advantages: •Low loading and overall height •Optimum corrosion protection through hot-dip galvanizing •Safe loading and unloading thanks to supports on the loading ramps •Easy and lightweight handling of the aluminum loading ramps •Ideal options for securing the load thanks to standard lashing options •The continuously height-adjustable drawbar enables compatibility with the different coupling heights of the towing vehicles •Low tare weight => resulting in high payload => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are quoted ex works D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 - Gersthofen* *Sale only to business customers!*

Condition: new, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, suspension: steel, color: silver, Equipment: ABS, tail-lift, trailer coupling, 1 day €135 3 days €370 1 week €660 Fedpfjin Ia Rex Aa Espk 1 month €1950 Loading area 500cm x 201cm x 30 cm with access ramps 11.5 Construction machinery tandem low-loader HS 115020BS HOT-DIP GALVANIZED Equipment: • Permissible total weight kg • Payload approx. kg • Loading area approx. 5000 x 2010 mm • Access ramps with grating surface, hot-dip galvanized • Fixed drawbar • Reinforced 25 t geared support winch with load and fast gear (no support wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2000 daN per pair) • 2 folding supports at the rear of the vehicle • ABS braking system • Steel fenders, hot-dip galvanized • Bridge deck made of wooden paneling • Chassis frame including body hot-dip galvanized

Condition: new, empty load weight: 1,500 kg, maximum load weight: 3,500 kg, overall weight: 5,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 330 mm, suspension: other, tire size: 215, wheelbase: 850 mm, Year of construction: 2023, Equipment: ABS, HUMBAUR Construction Machinery Tandem Lowboy Trailer HS 654020 BS INCLUDING ALUMINUM loading ramps at the rear HOT-DIPPED GALVANIZED CHASSIS FRAME Fpsdpfohmm Rvex Aa Eok Equipment: •Permissible total weight 6,500 kg •Payload approx. 4,900 kg •Loading area approx. 4,000 x 2,000 mm •Loading ramps made of ALUMINUM •Tow bar, height-adjustable •Automatic support wheel •4 pieces of 3 t lashing eyes (in the corners) •10 pieces of 2 t lashing points, recessed in the outer frame •2-circuit compressed air ABS braking system •Steel sheet mudguards •Bridge deck made of softwood planks •Chassis frame hot-dip galvanized •Tires 215/75 R17.5 Your advantages: •Low loading height •Optimal corrosion protection through hot-dip galvanizing •Safe loading and unloading thanks to supports on the loading ramps •Simple and easy handling of the aluminum loading ramps •Ideal options for securing the load thanks to standard lashing points •The continuously height-adjustable tow bar enables compatibility with the different coupling heights of the towing vehicles •Low tare weight => resulting in a high payload

Condition: new, empty load weight: 2,500 kg, maximum load weight: 8,400 kg, overall weight: 10,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, suspension: steel, tire size: 235/75 r17,5 zoll, wheelbase: 990 mm, Year of construction: 2024, Equipment: ABS, Construction machinery tandem lowboy trailer HS 115020BS HOT-DIP GALVANIZED Features: • Permissible total weight 10,900 kg • Payload approx. 8,410 kg • Loading area approx. 5000 x 2010 mm • Access ramps with grating surface, hot-dip galvanized • Fixed drawbar • Reinforced 25 t geared support winch with load and fast gear (no support wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing eyes in the outer frame (2000 daN per pair) • 2 folding supports at the rear of the vehicle • ABS braking system • Steel fenders, hot-dip galvanized • Bridge floor made of wood decking • Chassis frame incl. body hot-dip galvanized => Shipping costs for delivery: 2.90 Euro plus VAT per km => Prices are ex works D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE CONSTRUCTION Fjdehmm Rnjpfx Aa Espk *Subject to prior sale and changes!* *Price valid ex works D-86368 - Gersthofen* *Images may vary and are for general guidance only => may include/show optional accessories at an extra cost*

Condition: new, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2026, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIPPED GALVANIZED CHASSIS FRAME => HOT-DIPPED GALVANIZED AXLE FRAME => HOT-DIPPED GALVANIZED RAMP => 10 PIECES OF 10-TON LASHING POINTS => 10 PIECES OF 3-TON LASHING POINTS, OUTER FRAME => 8 PIECES OF 2-TON LASHING POINTS, OVER WHEELS => SPRING-LOADED MECHANISM FOR THE RAMPS => Ø 40 MM DRAWBAR => RAMPS APPROXIMATELY 2,700 MM LONG Fodsd U A Tgopfx Aa Eopk => RAMPS APPROXIMATELY 750 MM WIDE => TWIN TIRES 235/75 R17.5 => LOAD HEIGHT WHEN LOADED ONLY APPROXIMATELY 860 MM => COUPLING DIMENSION / B-DIMENSION APPROXIMATELY 10,720 MM => CORNERS AT THE FRONT ARE BEVELED => TWO FOLDING SUPPORTS AT THE REAR => AND MORE => Shipping costs for delivery: 2.90 Euro plus VAT per km => Prices are ex works D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE CONSTRUCTION *Subject to prior sale and changes!* *Price valid ex works D-86368 - Gersthofen* *Sales only to business customers!* *Images may vary and are for general guidance only => may include/show accessories at an additional cost*

Condition: new, empty load weight: 3,600 kg, maximum load weight: 10,000 kg, overall weight: 13,600 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,450 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75 r17,5 zoll, wheelbase: 990 mm, Year of construction: 2026, Equipment: ABS, HUMBAUR Construction Machinery Transporter, Tandem Low Loader LOADING PLATFORM WITH SLOPED REAR SECTION HBT 136224BS / Hot-dip galvanized / Aluminum side panels Chassis frame hot-dip galvanized Aluminum side panels, anodized Equipment: • Tandem low loader (construction machinery and materials transporter) • Loading platform with sloped rear section • Permissible total weight 11,900 kg • Payload approx. 9,010 kg • Loading platform approx. 6200 x 2460 mm • Bridge floor made of approx. 40 mm soft wood planks • Aluminum side panels, 400 mm high, anodized • Reinforced 25 t geared winch with load and fast gear • Fixed drawbar • Coupling height approx. 750 - 1000 mm • 3 pairs of recessed 3 t lashing points (3000 daN) • 6 pairs of recessed 1 t lashing points (1000 daN) in the outer frame • 2 telescopic, folding support legs at the rear of the vehicle • ABS 2-circuit pneumatic braking system • 1-piece loading ramps, hot-dip galvanized, approx. 2400 mm long and approx. 520 mm wide, with galvanized STEEL GRATING SURFACE • Mudguards • Anti-splash system • Ø 40 mm DIN towing eye • Aluminum side impact protection • Loading angle only approx. 16° • Loading height unladen only approx. 920 mm Optionally, we offer you the following for an additional charge: • Plastic tool box under the loading platform • Additional cost: 290,- Euro plus VAT • Delivery costs: 2.90 Euro plus VAT per km • Prices are ex works D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. Fpsdpjhmm Rksfx Aa Esk DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 - Gersthofen* *Sales only to business customers!* *Pictures may vary and are for general orientation only => may show/include accessories at an extra cost.*

Condition: new, empty load weight: 9,650 kg, maximum load weight: 30,350 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,740 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 4-AXLE LOW LOADER IN TOP CONDITION! => HOT-DIPPED GALVANISED (CHASSIS FRAME, TURNTABLE FRAME, RAMP) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOW LOADER AXLES => LASHING PACKAGE => HOLE-PUNCHED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLIMBING STRIPS IN THE REAR AREA OF THE RAMP => 6 LASHING POINTS IN THE EXCAVATOR ARM RECESS IN THE REAR AREA => LONG, ONE-PIECE RAMPS => SHALLOW RAMP ANGLE Permissible total weight 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanised Turntable frame hot-dip galvanised Ramps hot-dip galvanised Air suspension SAF axle with drum brake EBS electronic braking system Tyres 235/75R17.5 – 16 ply Low bed length approx. 7160 mm Recess for excavator arm storage, approx. 3000 mm x 730 mm x 180 mm in the rear area of the low bed 4 pairs of recessed lashing rings 10 tonnes in the low bed 2 pairs of recessed lashing rings 10 tonnes in the upper bed Fedpfx Aashvxgzj Espk 4 pairs of lashing points 3 tonnes in the outer frame of the low bed 3 pairs of lashing eyes 6 tonnes on the outer frame 4 pairs of spar pockets in the outer frame of the upper bed 4 pairs of spar pockets in the outer frame of the low bed 3-metre widening kit with folding outriggers without slope 4 x warning signs with lighting Rotating beacon at the rear LARGE STEEL STORAGE BOX under the loading platform 2 storage compartments with folding lids in the upper platform Hydraulic ramp lifters One-piece ramp approx. 3150 x 750 mm Softwood flooring for loading platform and ramps 40,000 kg GVW only with special permit according to §70 => Delivery costs: 2.90 euros plus VAT per km => Prices are ex D-86368 - Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL VEHICLE CONSTRUCTION *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale only to commercial customers!* *Images may vary and are for general guidance only => may include/show accessories at an additional cost*

Condition: new, empty load weight: 6,650 kg, maximum load weight: 23,350 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 3-AXLE LOWBED TRAILER => FULL AIR SUSPENSION (front and rear) => HOT-DIPPED GALVANIZED Permissible total weight 30,000 kg Payload approx. 23,350 kg Chassis frame hot-dip galvanized Air suspension SAF axle with drum brake EBS electronic braking system Tires 235/75R17.5 – 12 ply Lowbed length approx. 6500 mm 3 pairs of lashing rings 10 tons, recessed in the lowbed 2 pairs of lashing rings 10 tons, recessed in the upper bed 4 pairs of lashing points 3 tons on the outer frame 3 pairs of lashing eyes 6 tons on the outer frame 6 pairs of stake pockets 90 x 50 mm in the outer frame Storage box at the front on top of the platform, with a hinged lid 3-meter widening kit without slope, with folding outrigger Spring-loaded ramp lifter 4 x warning signs Rotating beacon Storage compartment under the loading area 1-piece ramp approx. 3150 x 750 mm Softwood decking for loading area and ramps Fsdpshmm N Usfx Aa Eopk Optional extras if required: Hydraulic ramp lifter €2690.00 + VAT => Freight costs for delivery: €2.90 plus VAT per km => Prices are ex works D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE CONSTRUCTION *Subject to prior sale and changes!* *Price valid ex works D-86368 - Gersthofen* *Sales only to business customers!* *Images may differ and are for general guidance only => may include/show accessories at extra cost*

Condition: new, empty load weight: 10,650 kg, maximum load weight: 39,350 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 9,830 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 5-AXLE ROTATING FIFTH WHEEL LOWBED TRAILER, HOT-DIPP GALVANIZED => FULL AIR SUSPENSION => HOT-DIPP GALVANIZED IN TOP CONDITION!!!! * AS A LIFT AXLE * AS A FOLLOW-UP STEERING AXLE • SAF – LOWBED AXLES • AIR SUSPENSION • SINGLE-PIECE LONG RAMP • HYDRAULIC RAMP LIFT • HYDRAULIC REAR SUPPORT • HYDRAULIC SIDE SHIFT • HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE • EXCAVATOR ARM BUCKET • CHASSIS AND TURNTABLE FRAME HOT-DIPP GALVANIZED Fjdpehmm Rcsfx Aa Eepk • OUTER FRAME ADDITIONALLY PAINTED RED • RAMPS HOT-DIPP GALVANIZED • 10 TON LASHING POINTS RECESSED IN THE LOADING AREA • 3 TON LASHING POINTS IN THE OUTER FRAME, HIGH PLATFORM • 6 TON LASHING POINTS IN THE OUTER FRAME, LOW BED • 4 PAIRS OF LASHING POINTS, 3 TON, IN THE OUTER FRAME, LOW BED • LASHING POINTS IN THE EXCAVATOR ARM BUCKET • 3-METER WIDENING KIT • FOLDING OUTRIGGER • WOODEN BEAMS IN THE STEEL BOX UNDER THE LOADING AREA • SECOND STEEL STORAGE BOX UNDER THE LOADING AREA • WARNING SIGNS • REAR ROTATING BEACON • LADDER RUNG ON THE REAR • 2 STORAGE BOXES IN THE HIGH PLATFORM • DIGITAL AXLE LOAD DISPLAY • WABCO SMART BOARD • AIR SUSPENSION • LOWERING VALVE AT THE REAR (REAR LOWERING FOR LOADING AND UNLOADING) • GIRDER POCKETS IN THE OUTER FRAME • TWO GIRDER POCKETS INCLUDING INSERTED GIRDERS AT THE FRONT • EBS - ELECTRONIC BRAKING SYSTEM B-DIMENSION = APPROX. 11,790 MM => Shipping costs for delivery: 2.90 EUR plus VAT per km => Prices are ex works D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE CONSTRUCTION *Subject to prior sale and changes!* *Price valid ex works D-86368 - Gersthofen* *Sales only to commercial customers!* *Pictures may differ and are only for rough orientation => may contain/show accessories at an extra cost*

Condition: new, empty load weight: 1,600 kg, maximum load weight: 4,900 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 330 mm, suspension: other, tire size: 215/75 r17,5 zoll, wheelbase: 850 mm, Year of construction: 2023, Equipment: ABS, HUMBAUR Construction Machinery Tandem Low-Loader HS 654020 BS INCLUDING ALUMINUM Ramps at the Rear HOT-DIPPED GALVANIZED CHASSIS FRAME Equipment: • Permissible total weight 6,500 kg • Payload approx. 4,900 kg • Loading area approx. 4,000 x 2,000 mm • Ramps made of ALUMINUM • Drawbar fixedly mounted • Automatic support leg • 4 pieces of 3 t lashing points (in the corners) • 10 pieces of 2 t lashing points, recessed in the outer frame • 2-circuit compressed air ABS braking system • Steel sheet mudguards • Bridge deck made of softwood planks • Chassis frame hot-dip galvanized • Tires 215/75 R17.5 Your Advantages: • Low loading or construction height • Optimal corrosion protection through hot-dip galvanization • Safe loading and unloading thanks to supports on the ramps • Simple and easy handling of the aluminum ramps • Ideal possibilities for securing the load through standard lashing options • The continuously adjustable drawbar allows compatibility with the different coupling heights of the towing vehicles • Low tare weight => resulting in a high payload => Freight costs for delivery: 2.90 Euro plus VAT per km => Prices are ex D-86368 - Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE CONSTRUCTION Fedpjhmm Ryefx Aa Eopk *Subject to prior sale and changes!* *Price valid ex D-86368 - Gersthofen* *Sale only to business customers!*

Condition: new, empty load weight: 7,500 kg, maximum load weight: 32,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 03/2023, loading space length: 9,700 mm, loading space width: 3,000 mm, loading space height: 900 mm, suspension: air, tire size: 235/75r17,5, Year of construction: 2026, Equipment: ABS, center pivot plate, TOP FEATURES => INCLUDES THE FOLLOWING ACCESSORIES: Chassis frame hot-dip galvanized Storage box at the front on top of the platform, with hinged lid Storage box at the rear on top of the platform, with hinged lid Recess for excavator arm storage, low-bed area at the rear Fedjglbllopfx Aa Eepk 3 m equipment package without slope Warning package for special permit Steel sheet toolbox Ladder support package in the outer frame Basic hydraulics for trucks with rear connection Hydraulic ramp lift for 1-piece ramps Hydraulic ramp adjustment, lateral Hydraulic support legs, left and right, 1 each 1 pair of lashing eyes, 6 tons, in the outer frame, bolted WABCO Smart Board, configured SSV complete, front left, HTD409525K COC, Certificate of Conformity OPTIONAL Rubber flooring on the ramp, €1890 net Rubber flooring on the slope, €1250 net Reversing drawbar, 40 / 50 DIN

Condition: new, empty load weight: 4,800 kg, maximum load weight: 16,200 kg, overall weight: 21,000 kg, loading space length: 6,540 mm, loading space width: 2,540 mm, loading space height: 870 mm, suspension: air, tire size: 235/75 r 17,5, Year of construction: 2026, Equipment: ABS, Air suspension with raising and lowering function SAF low-loader axles Fodoi Dqn Ropfx Aa Eopk Twin tires 235/75 R 17.5 EBS electronic braking system 6 pieces of 10-ton lashing points recessed in the floor 14 pieces of 2-ton lashing points in the outer frame Gear-supported winch with load and fast gear Rear support: 2 folding supports on the chassis frame Loading ramps approximately 3100 mm long and approximately 750 mm wide Laterally adjustable Bridge deck with wooden surface and steel checker plate Over the wheels Wooden surface in the loading ramps Spring-loaded ramp lifter Aluminum side walls with center supports Hot-dip galvanized steel front wall Infinitely adjustable drawbar Coupling height approximately 800 - 1000 mm DIN drawbar eye d= 50 mm Loading area sloped in the rear area Fenders with anti-splash system Additional features available upon request Collection from the factory or delivery Price per KM: 2.90 Euro