Used Humbaur Low Loader / Lowbed Trailers for sale (568)

Condition: new, maximum load weight: 16,200 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg Gbedpfxskn N Rwo Aaxjw * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp * Approx. 13° drive-on angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 8,650 kg, maximum load weight: 31,350 kg, overall weight: 40,000 kg, axle configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2025, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_2022 Technical data: Internal dimensions: approx. 9,220 mm x 2,540 mm x 0 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Gross vehicle weight: 24,000 kg Payload: approx. 15,350 kg Tires: 235/75R17.5 inch Loading height: approx. 900 mm Drawbar length: approx. 1500 mm Coupling height: approx. 820-1000 mm Drive-on angle: approx. 10° Screed length: approx. 3150 mm Screed width: approx. 750 mm Permissible total weight of special equipment: 40,000 kg Payload special gen.: approx. 31,350 kg Drop deck length: approx. 6,610 mm Overall dimensions (LxWxH): 11200 Total weight (technical): approx. 44,000 kg Technical axle load: approx. 11,000 kg 4 pairs of lashing points, 10,000 kg per lashing point Lashing rings in drop deck, recessed 3 pairs of lashing points, 10,000 kg per lashing point 4 pairs of lashing points, 2,000 kg per lashing point Via wheel cut-out 3rd and 4th axle Lashing points in drop deck outer frame Standard equipment: Axles Low loader axles from renowned manufacturers Tires Tires of the manufacturer's choice Suspension Air suspension unit including lifting and lowering acting on rear axle unit Brake system Brake system in accordance with EC directives with EBS 4S/3M in multi-voltage version (12-24V), Spring-applied parking brake incl. 2 test connections pulled outwards for brake/modulator and bellows pressure Electrical system LED lighting with flashing function for side marker lights, Multi-voltage (12-24V) Bogie Solid welded construction with low-maintenance ball bearing slewing ring Draw gear Cranked drawbar with drawbar eye Ø 50 mm low-maintenance silent bushes including height adjustment for drawbar Frame Gedpfx Ajiciuteaxobw Solid welded construction made of high-strength fine-grained steel Stretched cross members for maximum stability Wheel recesses at the front (top length approx. 2500 mm - depth approx. 410 mm) and rear (top length approx. 1470 mm) rear (top length approx. 1470 mm - depth approx. 370 mm); without wheel recess cover; Excavator trough (length 1650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with 2010 wheelbase, front corners chamfered, Climbing rails at the rear on the drive-on slope for maximum safety during loading and unloading Floor 50 mm softwood flooring (painted/impregnated) Ramps One-piece hot-dip galvanized drive-on ramps (3150mm x 750mm) with 50 mm softwood decking (painted/impregnated), laterally adjustable direct-acting vertical spring lifters for easy operation Optimum securing with turnbuckle and counter stop Finishing Hot-dip galvanized chassis frame Support 2 folding supports at the rear left and right at the rear of the vehicle Equipment Folding side collision protection, front semi-circular mudguards made of plastic - rear straight steel mudguards with anti-spray, 2 wheel chocks with holder; contour marking in accordance with ECE Directive R48 => UVM. => Freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. 0911/830504 DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, empty load weight: 4,600 kg, maximum load weight: 166,400 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, loading space height: 3,710 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- --- Gbsdpfx Ajkcuyzeaxsw HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 10,650 kg, maximum load weight: 39,350 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 9,830 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2025, Equipment: ABS, center pivot plate, 5-AXLE TURNTABLE LOW-LOADER HOT-DIP GALVANIZED => FULLY AIR-SUSPENDED => HOT-DIP GALVANIZED IN TOP - EQUIPMENT!!!! * AS LIFT AXLE * AS SELF-STEERING AXLE -SAF - LOW LOADER AXLES -LIFT SPRING -1-PART LONG RAMPS -HYDRAULIC RAMP JACK -HYDRAULIC REAR STABILIZERS -HYDRAULIC SIDE SHIFT -HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE -EXCAVATOR STICK TROUGH -HOT-DIP GALVANIZED CHASSIS AND BOGIE FRAME -EXTERIOR FRAME ADDITIONALLY PAINTED IN RED DRIVE-ON RAMPS HOT-DIP GALVANIZED -10 to. LASHING POINTS RECESSED IN THE LOADING AREA -3 to. LOCKING POINTS IN THE EXTERIOR FRAME High plateau -6 to. LASHING POINTS IN THE OUTDOOR FRAME Low bed -4 pairs of lashing points 3 tons in the outer frame low bed -LASHING POINTS IN THE EXCAVATOR TROUGH -3 METER WIDENING PACKAGE -KLAPPAUSLEGER -WOODEN PLANKS IN THE STEEL BOX UNDER THE LOADING AREA -SECOND STEEL STOWAGE BOX UNDER THE LOADING AREA -WARNING TABLES -ROTATING BEACON AT THE REAR -CLIMBING RAILS AT THE REAR Gsdpfx Aajhmm Rcoxebw -2 STOWAGE BOXES IN THE HIGH PLATEAU -DIGITAL AXLE LOAD INDICATOR -WABCO-SMART-BOARD -AIR SUSPENSION -LIFT/LOWER VALVE AT THE REAR (REAR LOWERING FOR LOADING AND UNLOADING) -stake pockets in the outer frame -TWO STAKE POCKETS INCL. STANCHIONS ON THE FRONT SIDE -EBS - ELECTRONIC BRAKING SYSTEM B-DIMENSION = approx. 11,790 MM => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABOLIC SUSPENSION - V2 --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS braking system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon Equipment: * 24 months warranty * Gross vehicle weight 30,000 kg * Payload approx. 24,000 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * 3 pairs of lashing rings 10 tons recessed in the drop deck * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 4 pairs of lashing points 2 tons above wheel cut-out 2nd and 3rd axle * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting gear and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit according to §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Gjdokn N R Ejpfx Aaxsbw Modular design for easy retrofitting of 3 m folding extension, storage box in the high bed, plank box under the cargo bed, etc. --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABLE SUSPENSION - V2-Plus --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS brake system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon INCLUSIVE stake pockets & lashing ring package INCLUSIVE storage box at the top front of the platform, with hinged lid INCLUSIVE 3-meter package with storage compartment Equipment: * 24-month warranty * Gross vehicle weight 30,000 kg * Payload approx. 23,500 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * Storage box at the top front of the plateau, with hinged lid * 3 pairs of lashing rings 10 to. recessed in the low bed * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed Gbodpfokn N S Ajx Aaxjw * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 4 pairs of lashing points 2 to. over wheel cut-out 2nd and 3rd axle * 6 pairs of stanchion pockets in the outer frame (stanchion pocket package) * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting mechanism and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit in accordance with §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Optional variants at extra cost: * V2 Plus with hydr. ramp lift = € 1,000 net surcharge * V2 PlusPlus (spring lifter) with excavator trough = 700 € net surcharge * V2 PlusPlus with hydr. ramp lift & excavator trough = € 1,700 net surcharge --- ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, maximum load weight: 31,300 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 7,130 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: air, Equipment: ABS, center pivot plate, trailer coupling, Humbaur HTD40-K V20 Total weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Drive-on ramps hot-dip galvanized Air suspension with manual REAR lowering at the rear SAF axle with drum brake EBS electronic braking system Tires 235/75R17.5 – 16-fold Low bed length approx. 7160 mm Hole for excavator boom storage, approx. 3000 mm x 730 mm x 180 mm in the rear area of the low bed 4 pairs of lashing rings 10 tons sunk in the low bed 2 pairs of lashing rings 10 tons sunk in the high bed 4 pairs of lashing points 3 tons in the outer frame of the low bed 3 pairs of lashing eyes 6 tons on the outer frame 4 pairs of stake pockets in the outer frame of the high bed 4 pairs of stake pockets in the outer frame of the low bed 3-meter widening package with folding boom without slope 4 x warning signs with lighting Beacon at the rear Storage compartment under the loading area 2 storage compartments with hinged lid in the high plateau Hydraulic ramp jacks 1-part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVW only with special approval according to §70 ∗Stock vehicle - available immediately Godpfokn N Suex Aaxobw ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 2,800 kg, maximum load weight: 10,200 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 3,260 mm, tire size: 245/70 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg Gbjdskn N R Tjpfx Aaxsw * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Condition: new, maximum load weight: 14,500 kg, overall weight: 1,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS Gjdpfjkn N Sijx Aaxjbw --- INCLUDING SAF air suspension with lifting/lowering valve INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, maximum load weight: 16,400 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: Gbsdjkn N Sxspfx Aaxow * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 7,200 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-wheel) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 2,500 kg, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-over with ramp shaft, Typ. HBT 106224 BE (planks can be pushed in) INCLUDING side walls made of aluminium, anodized INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Gbedpfx Aaekn N R Nsxsw Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,400 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,140 x 2,550 x 1,400 mm * Aluminium drop sides, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Lockable mounting shaft for optional aluminum ramps in the chassis frame * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * BPW axles * 6 pcs. 6 t lashing rings countersunk * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Lockable pick-up shaft * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, maximum load weight: 9,500 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-through (wheels outside), Typ. HS 105020 BS --- INCLUDING galvanized grating on the access ramps at the rear --- HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,500 kg * Loading area approx. 5,000 x 2,010 mm * Loading height unloaded approx. 700 mm * Overall dimensions: LxWxH approx. 7,160 x 2,550 x 3,000 mm * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,400 x 540 mm) with one gas strut lift per ramp * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 850 mm * Reinforced 12 t geared support winch with load and fast gear * 4 6 t lashing rings (recessed in the corners) * 12 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Low loading and installation height * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp surface * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Gbsdekn N S Hepfx Aaxsw TOP! On request, we are happy to offer you a visible paint finish (front, side walls, mudguards and rear cross member) on the galvanized chassis in your corporate color, see example pictures. ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: used, Humbaur CH9 | Used Low Bed Semi-trailer 📍Location: Switzerland, Wallisellen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 9 inspection points 7 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Tip trailer , trailer is block doesnt tip , tires ok , needs new rubbertowinghitch rubber 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39732 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Godpfxsxvi Imj Aaxebw ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, machine/vehicle number: Gebrauchter Anhänger, empty load weight: 2,422 kg, maximum load weight: 7,568 kg, overall weight: 9,990 kg, axle configuration: 2 axles, first registration: 05/2020, next inspection (TÜV): 05/2021, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, loading space volume: 2.5 m³, suspension: steel, Year of construction: 2022, Used trailer, TOP condition TÜV NEW You can rent these trailers !!! \Price per day : 135.- \Price for 3 days 370.- Euro \Weekly price 670.- Euro \All prices incl. 19 % VAT. Gsdpfx Aaed U A S Eexsbw \

Condition: used, empty load weight: 700 kg, maximum load weight: 2,800 kg, overall weight: 3,500 kg, first registration: 01/2011, loading space length: 3,050 mm, loading space width: 1,700 mm, loading space height: 500 mm, Year of construction: 2011, Construction machinery trailers: - Gourdon - Type: GPA350 - Year of construction 2011 - towing eye - overrun braked - fully galvanized - Folding aluminum ramps, 180cm x 30cm with support - max. load per ramp: 1,785kg; max. total load (2 ramps): 3,570kg - track each 305cm x 50cm - open width (center of trailer): 67cm - Total width inside: 170cm Total trailer dimensions: 536cm x 234cm - Unladen weight: 700kg; permissible GG: 3,500kg - Height-adjustable drawbar - Spare wheel - Lashing eyes - Tandem axle - Loading height: 50cm; loading height in wheel recess: 43cm - Wheel recess distance: center - center: 215cm; wheel recess length 30cm each - Trailer from 1st hand - MULTIPLE MODELS IN STOCK You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale! Gbjdpfeqxuc Iox Aaxow

Condition: used, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 01/2022, loading space length: 5,040 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235/75R17,5 140J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75R17,5 140J, rear tire size: 235/75R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, surcharge for ramps: 800 ¤ , , Vehicle is sold and offered on commission, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gbedpfx Aaoxv Snvsxsw

Condition: new, axle configuration: 2 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, suspension: other, color: black, gearing type: other, driver cabin: other, emission class: none, 9929354 Humbaur three-way tipper with electric pump and black steel side walls, manufacturer: Humbaur, type: HTK 3000.31, internal dimensions: 3140 x 1750 x 350 mm L.W.H., permissible total weight: 3000 kg, payload approx. 2085 kg (payload information may vary depending on equipment and construction), tires: 13 inches, loading height approx. 695 mm, electric hydraulic pump with cable remote control, battery and manual emergency pump, battery and hydraulic unit with cover, tipping angle at the rear and sides approx. 45 °, robust steel side walls foldable and removable, black, stable angle lever locks on the side walls, V-drawbar bolted to welded frame construction, hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, solid steel tipping bridge, made from one piece (complete wood-free), 4-stage tipping cylinder, pendulum flap at the rear, 13-pin plug with reversing light, 6 lashing points flush with the floor integrated in the bridge floor, pulling force 800 kg per tie-down ring, automatic support wheel, integrated ramp shaft for easy retrofitting of aluminum loading ramps, mud flaps, side lights, including vehicle documents, Possible additional options and accessories for this trailer:, grid attachment 600 mm, additional side wall attachment 350 mm, aluminum sheet attachment 600 mm, aluminum loading ramps with a load capacity of 2800 kg per pair, net hooks mounted on the side walls, load securing net, wheel shock absorbers, tool box, registration of your new trailer with the road traffic authority, We would be happy to show you how you can finance your new trailer in convenient monthly installments and put together a customized financing offer for you. We always have more than 2,000 trailers in stock. You can find a large number of our trailers online at or visit us in Horn-Bad Meinberg, we look forward to seeing you! Images may show accessories that are not included in the standard delivery scope. Images and technical data may vary slightly due to constant further developments. Errors and changes reserved! Gbodpfx Aaetr I Hnsxow

Condition: new, maximum load weight: 1,135 kg, overall weight: 1,500 kg, loading space length: 3,100 mm, loading space width: 1,765 mm, loading space height: 150 mm, total width: 2,450 mm, total height: 670 mm, Year of construction: 2025, * Humbaur HKT 153117 S * Loading area can be lowered hydraulically Gbedpfxjvvgi Ej Aaxew * Year of manufacture 2025 * Total weight: 1500kg * Empty weight: 365kg * Payload: 1135kg * Overall dimensions: 4610mm x 2450mm x 670mm * Internal dimensions: 3100mm x 1765mm x 150mm * Bolted, hot-dip galvanized chassis * Mechanical safety lock of the swivel axle when driving * Humbaur multifunctional lighting * License plate holder at the rear, can be swung away for loading * Wooden floor 15 mm thick * Side walls made of aluminum 150 mm high with 4 pairs of integrated lashing rings * Insertion options at all corners for e.g. tarpaulin frame * Automatic support wheel * V-drawbar ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired!!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, empty load weight: 4,500 kg, maximum load weight: 14,500 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,459 mm, loading space height: 860 mm, suspension: air, tire size: 235/75r17,5, color: silver, Year of construction: 2023, Equipment: ABS, tail-lift, uploader, HBTZ 197224 Air-suspended lifting and lowering Hot-dip galvanized Gsdjlzigtepfx Aaxobw Loading height: approx. 870 mm, Drawbar length approx. 1800 mm, coupling height approx. 745-1010mm, Drive-on angle: approx. 13°, Screed length: approx. 3100 mm, plank width: approx. 760 mm, Floor covering made of 40 mm softwood planks, 4 lashing eyes per side, 10,000 kg per lashing point recessed in the bridge floor, 8 pairs of lashing rings in the outer frame - 2000 kg per lashing point, Drawbar eye 50 mm, galvanized, reinforced height adjustment infinitely variable, loading area sloping at the rear, front wall 400 mm galvanized steel, pluggable, Aluminium drop sides 400 mm, foldable and removable, galvanized corner stanchions, pluggable and removable, 2 folding supports at the rear, telescopic, support winch, spring-loaded parking brake, 2 folding steel ramps can be moved sideways, galvanized, ramp jack: 1 x gas pressure spring per ramp, ramp decking made of 50 mm softwood planks, ramp safety device with turnbuckle, galvanized steel mudguards, folding side approach gate, EBS, LED side marker reflector lights, air suspension, lift axle,

Condition: used, empty load weight: 3,500 kg, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 08/2018, loading space length: 7,200 mm, loading space width: 2,470 mm, suspension: other, tire size: 205/65R17,5 ---/126J, color: other, gearing type: other, front tire size: 205/65R17,5 ---/126J, rear tire size: 205/65R17,5 ---/126J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 600 mm side walls, front wall 1,200 mm high, loading height approx. 850 mm, twin tires, 10 x lashing eyes, customer vehicle, , --  Subject to printing errors, mistakes and changes, sample images --, More data at: !, More details: ! Gbodpfx Aaoxtp Rpsxjw

Condition: new, empty load weight: 2,980 kg, maximum load weight: 9,000 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 03/2022, next inspection (TÜV): 03/2023, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, loading space volume: 6.1 m³, suspension: air, tire size: 235/75/r17,5, wheelbase: 990 mm, Year of construction: 2023, Equipment: trailer coupling, uploader, Flatbed high loader Humbaur HBT 106224 BE Total dimensions 8290 x 2550 mm Loading height 920 mm Central tube with screw-in drawbar eye Ø 40 m, galvanized via infinitely height-adjustable via crank handle Air brake with release valve, automatic, load-dependent brake ALB Aluminum drop sides 400 mm high Floor covering made of 40 mm wooden planks Front and rear corner stanchions can be plugged in Rear support legs foldable left and right Gedpeh I Ax Defx Aaxjbw Reinforced 25 to geared support winch with load and high-speed gear Rigid side collision protection 1-part hot-dip galvanized drive-on ramps 2400 mm long and approx. 520 mm wide, with galvanized steel grating covering 24 V lighting system with multi-chamber rear lights LED side marker lights 15-pin connector plug Connecting hoses with red/yellow coupling heads

Condition: used, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 01/2022, loading space length: 5,040 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235/75R17,5 140J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75R17,5 140J, rear tire size: 235/75R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, surcharge for ramps: 800 ¤ , , Vehicle is sold and offered on commission, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedsxrmr Uopfx Aaxobw

Condition: new, empty load weight: 3,490 kg, maximum load weight: 14,510 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, loading space volume: 17.6 m³, tire size: 385/65 r22,5, wheelbase: 4,900 mm, color: silver, Year of construction: 2023, Equipment: ABS, center pivot plate, trailer coupling, Humbaur HD18 construction material transport trailer Turntable trailer Permissible total weight 18 000 kg Unladen weight only 3490 kg SAF axles with air suspension Hot-dip galvanized chassis frame Hot-dip galvanized corner and middle stanchions Gsdpfxjizhl Aj Aaxsbw Aluminum drop sides Screen-printed floor Lashing and hole outer frame with a hole spacing of only 125 mm and 57 pairs of lashing holes End wall height 1200 mm, dropside height 1000 mm Postage costs 280.- Euro Freight costs per km 3.- Euro

Condition: new, empty load weight: 965 kg, maximum load weight: 2,535 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,700 mm, loading space width: 2,180 mm, loading space height: 200 mm, loading space volume: 2.1 m³, suspension: other, tire size: 13 zoll, wheelbase: 990 mm, Equipment: tail-lift, trailer coupling, Universal transporter MTKA 354722, permissible total weight 3500 kg, Tipper body with double-acting hydraulics, 900 mm high ramp wall with special perforations and gas springs. 8 pairs of lashing points with 400 kg lashing force each in the outer frame. Drop sides can be folded down and removed from aluminum. Gbedpfxjgffnzs Aaxow Loading height only 650 mm. Lighting according to STVO, 13-pin electrics. Accessories such as spare wheel, 100 km/h approval, cable winch, etc. are of course available at any time at extra cost. Price plus freight and letter

Condition: new, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, loading space volume: 7.3 m³, suspension: air, tire size: 435/50 r19,5 zoll, Year of construction: 2023, Equipment: ABS, HUMBAUR TANDEM THREE-WAY TIPPER (HTK UNIVERSAL) With AIR SPRING!!! Chassis frame FIRE-galvanized in immersion bath Bridge frame FIRE-GALVANIZED IN THE DIP BATH Godpfx Ajiciudjaxobw SIDE WALLS HOT-DIP GALVANIZED IN IMMERSION BATH Equipment: Permissible total weight: 18,000 kg Payload: approx. 13,700 kg Drawbar load: 1,000 kg Loading area approx. 5040 x 2420 mm Steel drop sides approx. 600 mm high Dropside lifting springs for the side drop sides Fixed drawbar Reinforced 25 t (static) geared support winch with load and fast gear 5 pairs of 6 t lashing rings sunk into the bridge floor 2 folding and telescopic supports at the rear of the vehicle (hot-dip galvanized) 2-circuit ABS air brake system Mounting shaft for 2 aluminum ramps integrated in the chassis frame Central locking at the side and rear Plastic mudguards with anti-spray protection system 4 BALL TILT BEARINGS BREIT tires 4 x 435/50 R19.5 inch 15-pin 24 volt electrical connection plug for 24 volt lighting 7-pin 24 volt ABS connector plug Compressed air connections RED/YELLOW Ø 50 mm DIN towing eye Coupling height approx. 790 - 1050 mm Hydraulic connection: SVK BG3 plug Optionally we offer you for an extra charge -2 aluminum drive-on ramps, approx. 3570 x 400 mm, load capacity per pair 10,000 kg -Additional price: net 2650,- € plus VAT. -1x plastic toolbox mounted under the loading area -Additional price: net 330,- € plus VAT -Grille above the rear lights -Additional price: net € 190 plus VAT. => Freight costs for delivery: €2.90 plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*