Used Humbaur Lowbed Semitrailers for sale (588)

Condition: new, empty load weight: 10,650 kg, maximum load weight: 39,350 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 9,830 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2025, Equipment: ABS, center pivot plate, 5-AXLE TURNTABLE LOW-LOADER HOT-DIP GALVANIZED => FULLY AIR-SUSPENDED => HOT-DIP GALVANIZED IN TOP - EQUIPMENT!!!! Prjdpfx Ahjhmm Rcszjf * AS LIFT AXLE * AS SELF-STEERING AXLE -SAF - LOW LOADER AXLES -LIFT SPRING -1-PART LONG RAMPS -HYDRAULIC RAMP JACK -HYDRAULIC REAR STABILIZERS -HYDRAULIC SIDE SHIFT -HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE -EXCAVATOR STICK TROUGH -HOT-DIP GALVANIZED CHASSIS AND BOGIE FRAME -EXTERIOR FRAME ADDITIONALLY PAINTED IN RED DRIVE-ON RAMPS HOT-DIP GALVANIZED -10 to. LASHING POINTS RECESSED IN THE LOADING AREA -3 to. LOCKING POINTS IN THE EXTERIOR FRAME High plateau -6 to. LASHING POINTS IN THE OUTDOOR FRAME Low bed -4 pairs of lashing points 3 tons in the outer frame low bed -LASHING POINTS IN THE EXCAVATOR TROUGH -3 METER WIDENING PACKAGE -KLAPPAUSLEGER -WOODEN PLANKS IN THE STEEL BOX UNDER THE LOADING AREA -SECOND STEEL STOWAGE BOX UNDER THE LOADING AREA -WARNING TABLES -ROTATING BEACON AT THE REAR -CLIMBING RAILS AT THE REAR -2 STOWAGE BOXES IN THE HIGH PLATEAU -DIGITAL AXLE LOAD INDICATOR -WABCO-SMART-BOARD -AIR SUSPENSION -LIFT/LOWER VALVE AT THE REAR (REAR LOWERING FOR LOADING AND UNLOADING) -stake pockets in the outer frame -TWO STAKE POCKETS INCL. STANCHIONS ON THE FRONT SIDE -EBS - ELECTRONIC BRAKING SYSTEM B-DIMENSION = approx. 11,790 MM => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, maximum load weight: 37,460 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: air, Equipment: ABS, HUMBAUR 3-axle wheel recess low-loader with cranked loading area, type HTS30K wheel recesses --- INCLUDING lift axle & self-steering axle with SAF air suspension INCLUDING ALUMINUM side walls and tool box on the high plateau INCLUDING 3-meter package INCLUDING excavator recess INCLUDING large hydraulic package (hydraulic ramp jack, hydraulic side shift & hydraulic rear support) Equipment: V41 * Perm. Total weight 48,000 kg * Payload approx. 37,460 kg * Chassis frame and ramps hot-dip galvanized * Visible surface paint in RAL * SAF air suspension unit including lifting and lowering * Lift axle with traction aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * Excavator boom shelf approx. 3,000 mm long * Loading height approx. 890 mm * Fifth wheel height: approx. 1,230 mm * Tires 235/75R17.5 – 12 ply * Low bed length approx. 8,680 mm including slope * Fifth wheel platform length approx. 3,500 mm including slope * 2" kingpin can be moved by 340mm for 2+3 axle tractor units * Wheel recess depth 390 mm at the front and rear 320 mm for various wheel bases * Wheel recess extension parts with hardwood covers * Gooseneck with 400 mm front wall * Aluminum side wall 400 mm, foldable to the side + storage box with lid Pedpfxekn N Rps Ahzsrf * 3 pairs of lashing rings 6 tonnes recessed in the high bed * 3 pairs of lashing points 3 tonnes in the high bed outer frame * 5 pairs of lashing rings 10 tonnes recessed in the low bed * 5 pairs of lashing eyes 6 tonnes screwed to the outer frame * 3 pairs of stake pockets in the high bed outer frame * 5 pairs of stake pockets in the low bed outer frame * 3 pairs of lashing eyes 6 tonnes in the excavator arm storage * 3-meter widening package with folding boom, wooden planks * Steel sheet tool box under the loading area, lockable, mounted as a storage compartment for wooden planks on the side under the loading area * Warning package with lighting * Rotating beacon at the rear * 2x LED reversing lights at the rear * 1-part ramps approx. 3150 x 750 mm - ramp angle approx. 10° * Softwood flooring on low-loader and semi-trailer platform * Hydraulic ramp jacks * Hydraulic side shift * Hydraulic rear support * COC papers * 40,000 kg GVW only with special approval according to §70 * 1 pair of galvanized load guide rails * Gallows suspension for supply lines * Climbing rails on the ramp * Brake connection: red/yellow * Electrics: 3-way socket with 2x7-pin Socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 * ECE plate at the rear ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 4,800 kg, maximum load weight: 14,200 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 400 mm, suspension: air, tire size: 235/75 r17,5 zoll, wheelbase: 1,400 mm, Year of construction: 2024, Equipment: ABS, HUMBAUR 19 t construction machinery transporter tandem overloader with ZWILLING TIRES SLOPING LOADING AREA AT THE REAR HBTZ 196524 BS / Hot-dip galvanized / Aluminium side walls, with CENTRAL RINGS Hot-dip galvanized chassis frame Side drop sides aluminum ELOXIDATED with ZINCED CENTRAL RESTRICTIONS HOT-DIP GALVANIZED STEEL BULKHEAD INCLUDED: - SAF-axle DEEP LOADING AXLE - SPRING RAMP JACK EQUIPMENT: -LIFTING SPRING with lifting and lowering function SAF low-loader axles -TWIN TIRES 235/75 R17.5 -EBS electronic braking system -6 10 t lashing rings recessed in the bridge floor -14 2 t lashing rings sunk into the outer frame -Front support: reinforced 25 t (static) geared support winch with load and fast gear -Rear support: 2 folding supports on the chassis frame Drive-on ramps approx. 3,100 mm long and approx. 750 mm wide, laterally movable, hot-dip galvanized Prjdpfofi D Epox Ahzef -Bridge floor with wooden decking and STEEL tear plate above the wheels WOOD COVERING in the drive-on ramps -SPRING RAMP JACK -ALUMINIUM BOARD WALLS with hot-dip galvanized CENTRAL RINGS -HOT-DIP GALVANIZED STEEL BULKHEAD -Low loading height: only approx. 960 mm -Infinitely height-adjustable drawbar -Coupling height approx. 800 - 1,000 mm -DIN drawbar eye Ø 50 mm -Sloping loading area at the rear -Mudguards with anti-spray system We offer you the following options for an extra charge: -Plastic tool box under the cargo bed -Additional price: 290,- Euro plus VAT => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact person: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: air, Equipment: ABS, HUMBAUR 3-axle low loader semi-trailer with offset loading area, Typ. HTS30K-V44+ --- INCLUSIVE lift axle INCLUSIVE self-steering axle with SAF air suspension INCLUSIVE 3-meter package INCLUSIVE stowage box under cargo bed INCLUSIVE TIM/WABCO Smart Board for axle load display INCLUSIVE Hot-dip galvanized chassis INCLUSIVE ALU drop sides and stowage box to the semi-trailer platform INCLUSIVE stake pockets and lashing ring package INCLUSIVE excavator trough Equipment: V44+ * Gross vehicle weight 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized * SAF air suspension unit including lifting and lowering * INCLUSIVE hot-dip galvanized chassis * Lift axle with starting aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * LED lighting system * Loading height approx. 890 mm * Saddle height: approx. 1,230 mm * 235/75R17.5 tires - 12-ply * Drop deck length approx. 8,680 mm incl. slope * Saddle platform length approx. 3,500 mm incl. slope * Excavator trough * 2" kingpin can be offset by 340 mm for 2+3-axle SPM * Gooseneck with 400 mm bulkhead * 400 mm folding aluminum side wall + storage box with lid * Ramp rail at the offset to the gooseneck * 3 pairs of lashing rings 6 tons sunk into the raised bed * 3 pairs of lashing points 3 tons in the bunk bed outer frame * 5 pairs of lashing rings 10 to. recessed in the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 3 pairs of stake pockets in the outer frame of the high bed * 5 pairs of stanchion pockets in the low bed outer frame * 3-meter widening package with folding boom, wooden planks * Sheet steel toolbox under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Warning package with lighting * Rotating beacon at the rear Prsdekn N S Uopfx Ahzjf * 1-section ramps approx. 3150 x 750 mm - drive-on angle approx. 10° * Softwood flooring on ramps, low loading & semi-trailer platform * Spring lifting gear to the ramps * COC papers * 48,000 kg GVW only with special permit according to §70 * Climbing rails on the ramp slope * Brake connection: red/yellow * Electrical system: 3-way socket with 2x7-pin socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 --- Example pictures - equipment may vary ! ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Condition: new, empty load weight: 8,650 kg, maximum load weight: 31,350 kg, overall weight: 40,000 kg, axle configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2025, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_2022 Technical data: Internal dimensions: approx. 9,220 mm x 2,540 mm x 0 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Gross vehicle weight: 24,000 kg Payload: approx. 15,350 kg Tires: 235/75R17.5 inch Loading height: approx. 900 mm Drawbar length: approx. 1500 mm Coupling height: approx. 820-1000 mm Drive-on angle: approx. 10° Screed length: approx. 3150 mm Screed width: approx. 750 mm Permissible total weight of special equipment: 40,000 kg Payload special gen.: approx. 31,350 kg Drop deck length: approx. 6,610 mm Overall dimensions (LxWxH): 11200 Total weight (technical): approx. 44,000 kg Technical axle load: approx. 11,000 kg 4 pairs of lashing points, 10,000 kg per lashing point Lashing rings in drop deck, recessed 3 pairs of lashing points, 10,000 kg per lashing point 4 pairs of lashing points, 2,000 kg per lashing point Via wheel cut-out 3rd and 4th axle Lashing points in drop deck outer frame Standard equipment: Axles Low loader axles from renowned manufacturers Tires Tires of the manufacturer's choice Suspension Air suspension unit including lifting and lowering acting on rear axle unit Brake system Brake system in accordance with EC directives with EBS 4S/3M in multi-voltage version (12-24V), Spring-applied parking brake incl. 2 test connections pulled outwards for brake/modulator and bellows pressure Electrical system LED lighting with flashing function for side marker lights, Multi-voltage (12-24V) Bogie Solid welded construction with low-maintenance ball bearing slewing ring Draw gear Cranked drawbar with drawbar eye Ø 50 mm low-maintenance silent bushes including height adjustment for drawbar Frame Solid welded construction made of high-strength fine-grained steel Stretched cross members for maximum stability Wheel recesses at the front (top length approx. 2500 mm - depth approx. 410 mm) and rear (top length approx. 1470 mm) rear (top length approx. 1470 mm - depth approx. 370 mm); without wheel recess cover; Excavator trough (length 1650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with 2010 wheelbase, front corners chamfered, Climbing rails at the rear on the drive-on slope for maximum safety during loading and unloading Floor 50 mm softwood flooring (painted/impregnated) Ramps One-piece hot-dip galvanized drive-on ramps (3150mm x 750mm) with 50 mm softwood decking (painted/impregnated), laterally adjustable direct-acting vertical spring lifters for easy operation Optimum securing with turnbuckle and counter stop Pjdpfx Ahsiciutjzorf Finishing Hot-dip galvanized chassis frame Support 2 folding supports at the rear left and right at the rear of the vehicle Equipment Folding side collision protection, front semi-circular mudguards made of plastic - rear straight steel mudguards with anti-spray, 2 wheel chocks with holder; contour marking in accordance with ECE Directive R48 => UVM. => Freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. 0911/830504 DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, maximum load weight: 16,200 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp * Approx. 13° drive-on angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available Pjdpfokn N Rwex Ahzjrf ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 4,800 kg, maximum load weight: 16,200 kg, overall weight: 21,000 kg, loading space length: 6,540 mm, loading space width: 2,540 mm, loading space height: 870 mm, suspension: air, tire size: 235/75 r 17,5, Year of construction: 2024, Equipment: ABS, Air suspension with lifting and lowering function Podpfxoi Dqn Rs Ahzorf SAF low-loader axles Twin tires 235/75 R 17.5 EBS electronic braking system 6 10 t lashing rings recessed in the floor 14 2 t lashing rings in the outer frame Geared support winch with load and fast gear Rear support : 2 folding supports on the chassis frame Drive-on ramps approx. 3100 mm long and approx. 750 mm wide laterally movable Bridge floor with wooden decking and steel tear plate above the wheels Wooden decking in the access ramps Spring ramp jacks Aluminum drop sides with central stanchions Hot-dip galvanized steel end wall Infinitely height-adjustable drawbar Coupling height approx. 800 - 1000 mm Din towing eye d= 50 mm Loading area slanted at the rear Mudguards with anti-spray system Extras available on request at any time Collection ex works or delivery Price per KM 2,90 Euro

Condition: new, empty load weight: 4,600 kg, maximum load weight: 166,400 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, loading space height: 3,710 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- --- HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional Predekcuyzepfx Ahzof * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 7,500 kg, maximum load weight: 32,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 03/2023, loading space length: 9,700 mm, loading space width: 3,000 mm, loading space height: 900 mm, suspension: air, tire size: 235/75r17,5, Year of construction: 2024, Equipment: ABS, center pivot plate, TOP EQUIPMENT => INCLUDING THE FOLLOWING ACCESSORIES: Hot-dip galvanized chassis frame Storage box at the top front of the plateau, with hinged lid Rear storage box at the top of the plateau, with hinged lid Trough for excavator stick storage, rear low bed area 3 m equipment package without slope Warning package for special permit Sheet steel tool box Stake pocket package in outer frame Basic hydraulics for trucks with rear connection Hydraulic ramp lift for 1-piece ramps Hydraulic lateral ramp displacement Hydraulic support legs left and right 1 1 pair of lashing eyes 6 tons in the outer frame, bolted WABCO-Smart Board conf. SSV cpl. front left HTD409525K COC COC paper OPTIONAL Rubber floor on the ramp 1890€ net Prsdpfx Ahjglbllezjf Rubber floor on the slope 1250€ net Reversible drawbar 40 / 50 DIN

Condition: new, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABOLIC SUSPENSION - V2 Prjdpfx Askn N R Ejhzjf --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS braking system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon Equipment: * 24 months warranty * Gross vehicle weight 30,000 kg * Payload approx. 24,000 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * 3 pairs of lashing rings 10 tons recessed in the drop deck * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 4 pairs of lashing points 2 tons above wheel cut-out 2nd and 3rd axle * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting gear and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit according to §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Modular design for easy retrofitting of 3 m folding extension, storage box in the high bed, plank box under the cargo bed, etc. --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2024, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER including: 3 pairs of 6-tonne outer frame => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED ACCESS RAMPS => 10 PIECES 10 TONS LASHING POINTS => 10 PIECES 3 TON lashing points, outer frame => 8 PIECES 2 TONS OF TOWING POINTS, above wheels => SPRING LIFTING MECHANISM FOR THE ACCESS RAMPS => Ø 40 mm DRAWING FORK => DRIVING RAMPS approx. 2,700 MM LONG => EXPANDING ROMPS approx. 750 MM WIDE => TWIN TIRES 235/75 R17.5 INCH => LOAD HEIGHT LOADED ONLY approx. 860 MM => CUPD SIZE / B SIZE approx. 10,720 MM => FRONT CORNERS BEVELED => TWO FOLDING SUPPORTS AT THE REAR => UVM. => freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* Pjdpfsd U A Tgjx Ahzorf *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABLE SUSPENSION - V2-Plus --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS brake system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon INCLUSIVE stake pockets & lashing ring package INCLUSIVE storage box at the top front of the platform, with hinged lid Prodpfx Aokn N S Aohzsf INCLUSIVE 3-meter package with storage compartment Equipment: * 24-month warranty * Gross vehicle weight 30,000 kg * Payload approx. 23,500 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * Storage box at the top front of the plateau, with hinged lid * 3 pairs of lashing rings 10 to. recessed in the low bed * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 4 pairs of lashing points 2 to. over wheel cut-out 2nd and 3rd axle * 6 pairs of stanchion pockets in the outer frame (stanchion pocket package) * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting mechanism and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit in accordance with §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Optional variants at extra cost: * V2 Plus with hydr. ramp lift = € 1,000 net surcharge * V2 PlusPlus (spring lifter) with excavator trough = 700 € net surcharge * V2 PlusPlus with hydr. ramp lift & excavator trough = € 1,700 net surcharge --- ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 5,680 kg, maximum load weight: 18,320 kg, overall weight: 24,000 kg, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 r17,5, Year of construction: 2023, Equipment: ABS, Three-axle trailers BPW low-loader axles Prodpfjh I H Ddex Ahzsf Electric air suspension with 2 ride heights Lowering function for safe loading Brake system according to EC guidelines with 2S/2M Drawbar with drawbar eye d=50 mm Raising and lowering of the drawbar 8 pairs of lashing rings 10 tons sunk into the drop deck 6 pairs of lashing points 2 to above wheel cut-out 5 pairs of lashing/stake pockets 3 tons for 90x50 mm stakes 50 mm softwood decking Hot-dip galvanized chassis frame Folding side collision protection Stake pocket package in the outer frame One-piece hot-dip galvanized drive-on ramps laterally movable Direct-acting vertical spring jacks

Condition: new, maximum load weight: 31,300 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 7,130 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: air, Equipment: ABS, center pivot plate, trailer coupling, Humbaur HTD40-K V20 Total weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Drive-on ramps hot-dip galvanized Air suspension with manual REAR lowering at the rear SAF axle with drum brake EBS electronic braking system Tires 235/75R17.5 – 16-fold Low bed length approx. 7160 mm Hole for excavator boom storage, approx. 3000 mm x 730 mm x 180 mm in the rear area of the low bed 4 pairs of lashing rings 10 tons sunk in the low bed 2 pairs of lashing rings 10 tons sunk in the high bed 4 pairs of lashing points 3 tons in the outer frame of the low bed 3 pairs of lashing eyes 6 tons on the outer frame 4 pairs of stake pockets in the outer frame of the high bed 4 pairs of stake pockets in the outer frame of the low bed 3-meter widening package with folding boom without slope Prsdpfx Askn N Sushzof 4 x warning signs with lighting Beacon at the rear Storage compartment under the loading area 2 storage compartments with hinged lid in the high plateau Hydraulic ramp jacks 1-part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVW only with special approval according to §70 ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, empty load weight: 3,900 kg, maximum load weight: 9,700 kg, overall weight: 13,600 kg, axle configuration: 2 axles, loading space length: 7,280 mm, loading space width: 2,450 mm, suspension: air, tire size: 205/65 r17,5, wheelbase: 1,270 mm, Year of construction: 2023, Equipment: ABS, trailer coupling, HBTZ 197224 BS Tandem beveled 400 mm aluminum drop sides Rear loading area beveled Loading height 870 mm Axles from renowned manufacturers Air-sprung Podpfx Ahogi H Dpszerf ABS Height-adjustable drawbar One-piece spring ramps 3 pairs of 10 to lashing points 8 pairs of 2 to lashing points Completely galvanized Tires 205/65 R 17.5

Condition: new, empty load weight: 2,800 kg, maximum load weight: 10,200 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 3,260 mm, tire size: 245/70 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized Predpfx Askn N R Tjhzof * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Condition: new, empty load weight: 1,500 kg, maximum load weight: 3,500 kg, overall weight: 5,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 330 mm, suspension: other, tire size: 215, wheelbase: 850 mm, Year of construction: 2023, Equipment: ABS, HUMBAUR construction machinery tandem low loader HS 654020 BS INCLUDING ALUMINIUM ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: -Permissible total weight 6,500 kg -Payload approx. 4,900 kg -Loading area approx. 4,000 x 2,000 mm -ALUMINIUM loading ramps Height-adjustable drawbar -Automatic support wheel -4 3 t lashing rings (in the corners) -10 2 t lashing points recessed in the outer frame -2-circuit compressed air ABS brake system -Sheet steel mudguards Predpfxshmm Rvo Ahzjf -bridge floor made from softwood planks Hot-dip galvanized chassis frame -215/75 R17.5 tires Your advantages: -Low loading and overall height -Optimal corrosion protection thanks to hot-dip galvanizing in an immersion bath -Safe loading and unloading thanks to supports on the loading ramps -Simple and easy handling of the aluminum ramps -Ideal load securing options thanks to standard lashing options -The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles -Low tare weight => therefore high payload

Condition: new, maximum load weight: 14,500 kg, overall weight: 1,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS --- INCLUDING SAF air suspension with lifting/lowering valve INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: Prodpfx Aekn N Sijhzef * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, suspension: steel, color: silver, Equipment: ABS, tail-lift, trailer coupling, 1 day 135 € 3 days 370 € 1 week 660 € 1 month 1950 € Loading dimensions 500cm x 201cm x 30 cm with ramps 11.5 Construction machinery tandem low loader HS 115020BS FIRE-CONDITIONED Equipment: -Permissible total weight kg -Payload approx. kg -Loading area approx. 5000 x 2010 mm Drive-on ramps with grating, hot-dip galvanized -Fixed drawbar -Reinforced 25 t geared support winch with load and fast gear (no support wheel!) -2 pairs of recessed 6 t lashing rings (in the corners) Pjdoin Ia Rspfx Ahzerf -5 pairs of recessed lashing brackets in the outer frame (2000 daN per pair) -2 folding supports at the rear of the vehicle -ABS brake system -steel mudguards, hot-dip galvanized -bridge floor made of wooden decking -Chassis frame incl. body hot-dip galvanized

Condition: new, empty load weight: 1,600 kg, maximum load weight: 4,900 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 330 mm, suspension: other, tire size: 215/75 r17,5 zoll, wheelbase: 850 mm, Year of construction: 2023, Equipment: ABS, HUMBAUR construction machinery tandem low loader HS 654020 BS INCLUDING ALUMINIUM ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Prodehmm Ryopfx Ahzof Equipment: -Permissible total weight 6,500 kg -Payload approx. 4,900 kg -Loading area approx. 4,000 x 2,000 mm -ALUMINIUM loading ramps -Drawbar permanently mounted -Automatic support wheel -4 3 t lashing rings (in the corners) -10 2 t lashing points recessed in the outer frame -2-circuit compressed air ABS brake system -Sheet steel mudguards -bridge floor made from softwood planks Hot-dip galvanized chassis frame -215/75 R17.5 tires Your advantages: -Low loading and overall height -Optimal corrosion protection thanks to hot-dip galvanizing in an immersion bath -Safe loading and unloading thanks to supports on the loading ramps -Simple and easy handling of the aluminum ramps -Ideal load securing options thanks to standard lashing options -The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles -Low tare weight => therefore high payload => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers!

Condition: new, empty load weight: 1,700 kg, maximum load weight: 4,800 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 4,500 mm, loading space width: 2,000 mm, loading space height: 330 mm, suspension: other, tire size: 215/75 r17,5 zoll, wheelbase: 850 mm, Year of construction: 2023, HUMBAUR construction machinery tandem low loader HS 654520 BS INCLUDING ALUMINIUM ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: -Permissible total weight 6,500 kg -Payload approx. 4,800 kg -Loading area approx. 4,500 x 2,000 mm -ALUMINIUM loading ramps -Drawbar continuously height-adjustable -Automatic support wheel -6 3 t lashing rings (in the corners) -10 2 t lashing points recessed in the outer frame -2 adjustable support feet on the drive-on ramps -2-circuit compressed air ABS brake system -Sheet steel mudguards -bridge floor made from softwood planks Podjhmm Rropfx Ahzjrf Hot-dip galvanized chassis frame -215/75 R17.5 tires Your advantages: -Low loading and overall height -Optimal corrosion protection thanks to hot-dip galvanizing in an immersion bath -Safe loading and unloading thanks to supports on the loading ramps -Simple and easy handling of the aluminum ramps -Ideal load securing options thanks to standard lashing options -The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles -Low tare weight => therefore high payload => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers!

Condition: new, empty load weight: 6,650 kg, maximum load weight: 23,350 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2024, Equipment: ABS, center pivot plate, 3-AXLE LOW-LOADER => FULL-SUSPENSION (front and rear) => HOT-DIP GALVANIZED Perm. total weight 30,000 kg Payload approx. 23,350 kg Chassis frame hot-dip galvanized Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 12-ply Drop deck length approx. 6500 mm 3 pairs of lashing rings 10 to. recessed in the low bed 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. on the outer frame 3 pairs of lashing eyes 6 to. on the outer frame 6 pairs of stanchion pockets 90 x 50 mm in the outer frame Storage box at the top front of the plateau, with hinged lid 3-meter widening package without slope, with hinged extension arm Spring ramp jack 4 x warning signs Rotating beacon Storage compartment under the cargo bed 1 part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps Extras if required : Hydraulic ramp lift 2690.00 + VAT => Freight costs for delivery: 2,90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact person: Mr. Hirn Tel. DOLL FAHRZEUGBAU Pedpfxshmm N Uj Ahzsrf *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: used, empty load weight: 8,700 kg, maximum load weight: 31,300 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,740 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2023, Equipment: ABS, center pivot plate, 4-AXLE LOW-LOADER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOW-LOADER AXLES => LASHING RING PACKAGE => flat outer frame for additional accessories => CLIMBING RAILS IN THE REAR AREA OF THE DRIVE-UP SLOPE => 6 LASHING POINTS IN THE EXCAVATOR TROUGH IN THE REAR AREA => LONG 1-PART DRIVE-ON RAMPS => FLAT DRIVE-ON ANGLE Perm. total weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized in an immersion bath Bogie frame hot-dip galvanized in an immersion bath Drive-on ramps hot-dip galvanized in an immersion bath Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 16-ply Drop deck length approx. 7160 mm Prjdpfehvxgzjx Ahzof Trough for excavator stick support, approx. 3000 mm x 730 mm x 180 mm in the rear low bed area 4 pairs of lashing rings 10 to. sunk into the drop deck 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. in the outer frame of the low bed 3 pairs of lashing eyes 6 to. on the outer frame 4 pairs of stanchion pockets in the outer frame High bed 4 pairs of stanchion pockets in the low bed outer frame 3-meter widening package with folding boom without slope 4 x warning signs with lighting Rotating beacon at the rear LARGE STEEL STORAGE BOX under the cargo bed 2 storage compartments with hinged lid in the high platform Hydraulic ramp jacks 1-section ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVW only with exceptional approval according to §70 => Freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, empty load weight: 3,600 kg, maximum load weight: 10,000 kg, overall weight: 13,600 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,450 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75 r17,5 zoll, wheelbase: 990 mm, Year of construction: 2024, Equipment: ABS, HUMBAUR construction machinery transporter tandem overloader LOADING AREA SLOPING AT THE REAR HBT 116224BS / Hot-dip galvanized / Aluminium drop sides Hot-dip galvanized chassis frame Anodized aluminium drop sides Equipment: -Tandem low loader (construction machinery material transporter) -Sloping loading area at the rear -Permissible total weight 11,900 kg -Payload approx. 9,010 kg -Loading area approx. 6200 x 2460 mm -bridge floor made of approx. 40 mm softwood planks -Aluminium drop sides 400 mm high, anodized -Reinforced 25 t geared support winch with load and fast gear -Fixed drawbar -Coupling height approx. 750 - 1000 mm -3 pairs of recessed 3 t lashing rings (3000 daN) -6 pairs of recessed 1 t lashing points (1000 daN) in the outer frame Pjdpjhmm Rkofx Ahzjrf -2 telescopic folding supports at the rear of the vehicle -ABS 2-circuit air brake system 1-part drive-on ramps, hot-dip galvanized, approx. 2400 mm long and approx. 520 mm wide, with galvanized STEEL GRID COVERING -mudguards -Anti-spray system -Ø 40 mm DIN towing eye -Aluminum side collision protection Drive-on angle only approx. 16° -Loading height unloaded only approx. 920 mm Optionally available for an extra charge: -Plastic tool box under the loading area -Additional price: 290,- Euro plus VAT => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: new, empty load weight: 2,500 kg, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, suspension: steel, tire size: 235/75 r17,5 zoll, wheelbase: 990 mm, Year of construction: 2024, Equipment: ABS, Construction machinery tandem low-loader HS 115020BS FIRE-CONDITIONED Equipment: -Permissible total weight 11,900 kg Prodpfxshmm Rne Ahzsf -Payload approx. 9,410 kg -Loading area approx. 5000 x 2010 mm Drive-on ramps with grating, hot-dip galvanized -Fixed drawbar -Reinforced 25 t geared support winch with load and fast gear (no support wheel!) -2 pairs of recessed 6 t lashing rings (in the corners) -5 pairs of recessed lashing brackets in the outer frame (2000 daN per pair) -2 folding supports at the rear of the vehicle -ABS brake system -steel mudguards, hot-dip galvanized -bridge floor made of wooden decking -Chassis frame incl. body hot-dip galvanized => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*