Used Stas Trailers for sale (119)

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,821 mm, loading space volume: 913 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm Basalt Grey Chassis type: moving floor Fifth wheel load, domestic (t): 12 Axle load, domestic (t): 8 Axle spacing (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Chassis series: 135 Technically permissible gross weight: 39 = 12 + 9 + 9 + 9 Wheelbase (WB) moving floor semi-trailer (mm): 7850 Internal height front (mm) (IHF): 2641 Internal height rear (mm) (IHB): 2821 Gedpexp Tkfefx Aaxsbw Loading length (mm): 13513 Volume (m³): 91.3 Total width (mm): 2550 Total length (mm): 14000 Chassis Chassis material: steel Tire size: 385/65R22.5 Neck height (mm): 217 Axles: JOST Brake type: JOST - DCA-T7 Offset (ET): 120 Option: 1st axle with traction aid Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Lowering of air suspension via smartboard and lift/lower valve Pneumatic coupling head: European palm coupling Rims: Speedline Diamond Wheel nut covers: Chrome with STAS logo Landing gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-side operation and 2 speed levels Control panel: EBS operation on left side in direction of travel, behind the axles Lighting manufacturer: Aspöck Lighting type: EUROPOINT III - LED 2 LED reversing lights, mounted rear left and right on lamp bracket Work lights (operated via switch): 2 LED reversing lights at the front, left and right in direction of travel, mounted near the landing gear Air connection in the toolbox Aluminium access ladder 3.80 m, right side in direction of travel Moving floor system: Cargo Floor brand Air and electrical console centrally mounted with gantry Lighting unit protection: one-piece splash guard Body Front wall inclination (°): 90 Rear wall inclination (°): 90 Rear wall type: swing doors A-shield: foldable, mounted on rear wall, right side in direction of travel Cover plate between floor and front wall: fixed aluminium plate and PVC strips Fifth wheel plate type: standard fifth wheel plate Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and out, double-wall profiles 600 mm wide - 30 mm thick Wear plates: rectangular, 1500 x 1000 x 4 mm Floor system operation: radio remote control Cargo floor control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile type: 8 mm ribbed Moving floor end plate: stainless steel With additional plastic guides below the floor profiles End cap reinforcement: stainless steel shoes over the end caps of floor profiles, with aluminium wear plate above the end caps Oil temperature sensor for moving floor system Residue-free discharge wall Residue-free discharge wall type: aluminium Residue-free discharge wall: brush Residue-free discharge wall storage: 6 wheels, bi-directional cleaning (loading floor) Rear wall: aluminium Rear door locking: 1x cam bar per door leaf Number of door handles - left door leaf: 2 handles per cam bar Number of door handles - right door leaf: 1 handle per cam bar Additional rear wall locking: single-acting pneumatic Operation of additional locking: manual, via control on the side of the control panel Rear door bumper: aluminium dock buffer across entire width of rear wall Tensioning system for sliding tarpaulin: tensioning gear with handle, mounted on lower/side wall of body Spriegel type: straight steel, foldable Quantity and position of

Condition: new, maximum load weight: 27,976 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,150 mm, loading space width: 2,330 mm, loading space height: 2,290 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5627 Immediately available! Purchase, rental, or rent-to-own options according to agreement! Approx. 55m³ Stas steel tipper trailer for scrap / swing doors / alloy wheels / immediately available ---- * Manufacturer: Stas * Model: Ferrostar - Steel Tipper Trailer * First registration: - (new vehicle) * Gross weight: 36,000 kg * Unladen weight (manufacturer): 8,024 kg * Payload: 27,976 kg * Axles: 3x SAF axles / 1st axle lift axle / starting aid / disc brakes * Suspension: Air suspension with raise & lower function * Tyres: 385/65 R 22.5 on Speedline Diamond alloy rims * Volume: approx. 55m³ (10.15m length x 2.33m width x 2.29m height) * Colour: Chassis RAL 9005, Body RAL 9005, Sliding cover SIO 7999 * EBS * Swing door (split 1/2 to 1/2) with additional pneumatic locking * Full surround rubber seal for swing door * 1x slide in the right-hand door * Tipper entry front left inside * Aluminium platform at the front with left-side access * Central clamping system for tarp securing * 2 roof bows (1 mid, 1 rear) * Aluminium sheet for tarp protection * Coupling height: 1.20m * Floor: 5mm HB450 * Side walls: 4/3mm HB450 * Front wall: 3mm HB450 * Rear wall: 3mm HB450 * Automatic lowering during tipping Gbsdpfoxpb Ufex Aaxew * Load gauge * Wabco Smartboard * Approx. 2.80m aluminium ladder on the right * Single mudguards * Aluminium full-load landing legs as drop legs * Shovel and broom holder on the right * 1x toolbox on the left * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights * LED taillights * Folding underrun protection * Tyre pressure monitoring (Wabco Trailerpulse) * "A" sign plate Immediately available! Purchase, rental, or rent-to-own options according to agreement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is subject to change without notice. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 29,950 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 11/2025, loading space length: 9,700 mm, loading space width: 2,475 mm, loading space height: 1,900 mm, loading space volume: 46 m³, total width: 2,550 mm, total height: 3,838 mm, Equipment: ABS, Aluminum box body approx. 46 cbm, rear area fitted with ALU wear plates left/right, aluminum chassis, combination rear door with double-winged doors and rotary latch/pendulum flap, pneumatic tailgate lock, 2 x grain sliders with cover, CRAMARO sliding roof, electric drive, HYVA tipping cylinder, JOST landing gears, ABS, EBS, SAF INTRA CD axle(s), aluminum rims, disc brake system, electronic air suspension system, 3rd axle steerable, lift axle, on/off switch for tipper lowering, LED side marker reflectors, 1x storage box, tow coupling. Vehicle may be covered with advertising decals and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with a quote from our partner workshops! Vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Gbedpfswzflzsx Aaxjw We would be pleased to prepare a financing or leasing offer for this item. Please contact us!

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2020, loading space volume: 52 m³, total length: 9,500 mm, total width: 2,480 mm, total height: 2,200 mm, suspension: air, tire size: 385/65R22,5, color: white, Year of construction: 2020, Equipment: ABS, = Additional Options and Equipment = - 2x Grain slides - Aluminium floor - EBS - Rear doors - Lift axle - Grain slide - LED lights - LED work lights - Air suspension - Roll tarp cover - Toolbox = Remarks = Stas S300CX Year: 2020 52 m³ Full aluminium Tailgate & door combination BPW axles 9 tons, disc brakes Axle 1: Lift axle Tarpaulin cover WABCO Smartboard with axle load indicator MOT/TÜV valid until 06/2026 = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle brand: BPW Brakes: disc brakes Suspension: air suspension Front axle: lift axle; Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40% Middle axle: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40% Gjdpfexnz Dwex Aaxebw Rear axle: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 6,068 kg Payload: 35,932 kg GVW: 42,000 kg Functionality Tipping: Rear Condition Technical condition: very good Optical condition: very good Damages: none Further Information Please contact John Hesselink or Christel Hesselink for more information. = Company Information = Financing this vehicle? No problem. We quickly arrange an affordable finance lease agreement for you with a term of 12, 24, 36, 48 or 60 months. All photos and further information can be found at or contact us directly.

Condition: used, axle configuration: 3 axles, first registration: 04/2004, total length: 12,800 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,420 mm, Year of construction: 2004, Axle configuration Godpfou Ur Dasx Aaxjbw Tyre size: 385/65R22.5 Axle make: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 7,030 kg Payload: 31,970 kg Gross vehicle weight (GVW): 39,000 kg Identification Registration number: OH-60-LR Further information Please contact Bob Beukers for more details.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2008, Year of construction: 2008, Equipment: ABS, Stas S 339 CX Year of manufacture: 2008, air suspension, 3 axles, tarpaulin, 2 support legs, round tipper body, internal number: 25A036 Gbsdpfx Aajxnfxfoxow

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Godpfsuar Amsx Aaxjbw Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2025, Equipment: ABS, Buy, rent, or lease with an option to purchase! Approx. 60m³ STAS agricultural moving floor with integrated grain hopper / service door / slider for sample collection, etc. ----* Manufacturer: STAS * Type: FARMSTAR - Agricultural Moving Floor * First registered: - (New vehicle) * Color: Chassis + body RAL 7016 anthracite gray, roll-up tarpaulin SIO 7340 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift axle + traction aid / disc brake * Tires: 385/65 R22.5 with Speedline Diamond aluminum rims * Wheelbase: 6.25m * Suspension: Air suspension with lifting and lowering * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control console at the rear right * 21 floorboard system, 6mm ribbed * Welded aluminum end caps * Aluminum rear end plate * Integrated grain hopper * Additional guides below the floor profiles * Complete emptying wall with brushes and stainless steel handles * Front wall made of aluminum plank profiles * Service door in the front wall * Smooth side walls inside and out (grain version), welded through * Viewing window on the rear left side wall * Wing doors (50/50) * 4 locking rods * 2 slides for sampling (left and right) * Pivoting door cross member * Front hydraulic connections with 3 m hoses and * Connection option below the body without hoses * 1" female pressure * 1" female return port * Operator platform with access at the front left and right * Saddle height 1,150mm * Single fenders * Full-load supports * Roll-up tarpaulin (900g/m²) with quick-click system * Aluminum bow, foldable * Aluminum rear light guard (foldable) * Aluminum air tank * 1x toolbox, front left * 1x toolbox, rear right * Shovel and broom holder, left * 1x aluminum step ladder, 2x 8-step, attached to the right * 1x extendable ladder at the rear right * Smartboard * TPMS tire pressure monitoring Gbedewknz Rspfx Aaxjw * 5-chamber LED taillights * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light on the inside of the bulkhead * 2 x 3 functional lights at the top of the door cross member Buy, rent, or rent with purchase option upon request! Note on possible errors in the advertisement: Despite careful preparation of this advertisement, isolated errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, empty load weight: 6,550 kg, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,613 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, wheelbase: 6,250 mm, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Axle manufacturer Jost, aluminum chassis, color grey, air-lift suspension, raising and lowering, lift axle 1st + 3rd axle, disc brake, fixed side underrun protection, toolbox, 2x LED reversing lights, 4 x LED side reversing lights (2x at the support winch + 2x behind the axle unit), 1 x LED light in the cargo area, broom and shovel holder on the left-hand side underrun protection in direction of travel, cargo floor control type CF 500 SL-C - E"-CONTROL 6 mm with additional plastic guides below the floor profiles, wing doors (1/2 - 1/2 with door end crossmember, remote control, rear door impact protection - aluminum impact buffer across the entire width of the rear wall, frame and tarpaulin, maintenance flap front left, work platform with access, roller tarpaulin (PVC tarpaulin Panama quality 900g/m²), load securing certificate DIN EN 12642 Code XL, production 5/2025, grain hopper / sluice with central outlet at rear and dust bag, immediately available" Godpfx Asxac Dpjaxobw

Condition: good (used), axle configuration: 3 axles, first registration: 06/2025, suspension: air, tire size: 385/65 R22.5, Year of construction: 2000, Axle configuration Tyre size: 385/65 R22.5 Axle make: ROR Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle 2: Max. axle load: 9,000 kg; Steered; Tyre tread left: 90%; Tyre tread right: 90% Rear axle 3: Max. axle load: 9,000 kg; Steered; Tyre tread left: 90%; Tyre tread right: 90% Weights Gjdpfx Aajwykipsxebw gross vehicle weight (GVW): 38,000 kg Condition Technical condition: good Optical condition: good Further information Please contact Bart Mostert or P. Mostert for more information.

Condition: used, maximum load weight: 34,370 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2020, next inspection (TÜV): 08/2026, loading space length: 13,480 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2020, Equipment: ABS, 3-axle Stas S 300ZX Walking Floor Trailer 92m³ VIN: L00005 Chassis / Attachments: * Air suspension / lifting and lowering system * Lift axle: 1st axle + 3rd axle * Aluminium support legs * WABCO Smart Board * Tyres: 385/65 R 22.5 * Tyre tread depth: 1st axle = 70/20%, 2nd axle = 40%, 3rd axle = 60% * 3 x SAF axles with disc brakes * STAS PVC toolbox * Saddle height: approx. 1.14 m Body: * Walking floor system: Cargo Floor * Capacity: approx. 92 m³ * DIN EN 12642-XL certified * Electrically operated sliding roof with remote control * Standing platform * Residue-emptying wall * Remote control Weights: * Gross vehicle weight: 42,000 kg * Payload: 34,370 kg * Unladen weight: 7,630 kg Other features: * German registration * Main inspection / Safety test: 02/ * 1 previous owner New main inspections, safety checks or changes in permitted weight (downgrading/upgrading) are available on request. We are happy to assist you in obtaining export/transfer plates and can also arrange delivery of your purchased vehicles within the Federal Republic. Please contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors! ---- Who are we? Gbjdjxl Ip Uspfx Aaxjw Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers around the world. Leible Nutzfahrzeuge specializes in new and used commercial vehicles. On 11,000 square metres, you will find a large selection of vehicles. Our corporate philosophy is based on fairness and integrity. Customer satisfaction is very important to us, so we offer our customers an excellent all-round service package and provide a competent contact person to assist them throughout the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organization of special transports We are pleased to help you arrange special transports. Temporary/export licence plates We are glad to help you obtain export or short-term number plates. Customs formalities We are happy to assist you with customs procedures.

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change. Gbjdsxf Spfopfx Aaxjw

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) Gbedpfx Aoxplxzoaxow SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: new, maximum load weight: 28,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Available for purchase, rental, or hire purchase by arrangement! STAS 91m³ Walking Floor Trailer / 10mm ribbed floor ---- * Manufacturer: Stas * Model: BIOSTAR - Walking Floor * First registration: - (new vehicle) * Color: Superstructure black RAL 9005, Chassis black RAL 9005, Tarpaulin black * Volume: approx. 91m³ (13.5m long x 2.47m wide x 2.82m high) * Gross weight: 36,000 kg * Unladen weight (manufacturer data): 7,690 kg * Payload: 28,460 kg * Axles: 3x JOST axles / 1st axle liftable / starting aid / disc brakes * Tires: 385/65 R22.5 on Speedline Diamond aluminium rims * Suspension: Air suspension with lift and lower function * EBS * Cargo Floor CF500SL-C floor with radio remote control * 10 mm ribbed floor * Moving bulkhead * Connection port on front wall (additional connection option on landing legs) * Operator platform with front left access * Swing doors (50/50) with pneumatic locking * Extendable ladder on the right * Roll-up tarpaulin with tension belts * 3x cross beams * Toolbox rear right * Aluminium drop legs Gsdpfx Aswi D S Aoaxsbw * Aluminium ladder approx. 3.80 m * Aluminium rear underrun protection * Shovel and brush holder on the left * Smartboard rear left * One-piece mudguard for rear lights * 2x LED work lights (1x left & 1x right) * 2x LED reversing lights, rear left and right New vehicle - Available immediately! For purchase, rental, or hire purchase by arrangement! Note regarding possible errors in the advertisement: Despite careful preparation, errors may have occurred in the text or specifications. We assume no liability for mistakes, changes, or prior sale. All information is without guarantee. Please contact us to confirm details or to clarify any further questions.

Condition: used, maximum load weight: 28,220 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2002, loading space volume: 90 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 90 cbm, floor with boarding mm, radio remote control, double-wing door with rotary bar lock at the rear, foldable beam above the doors, service door at the front, grain hopper in the rear, access ladder and standing platform at the front of the body, sliding tarpaulin, electric power pack 380V, ABS, EBS, SAF INTRA axle(s), disc brake system, landing gears, air suspension with lift/lower device, 1x storage box, vehicle may be wrapped and/or lettered with advertising. Gedpfjwuh Irex Aaxjbw Our offer is generally without new roadworthiness certification (TÜV). If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! The vehicle may be wrapped and/or lettered with advertising. Our general terms of delivery and payment apply. We would be happy to provide you with a financing or leasing quote for this item. Please contact us!

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2003, suspension: air, tire size: 385/65R22.5, color: white, Year of construction: 2003, = Additional Options and Accessories = - Rear Doors = Further Information = Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Lift Axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Dimensions Dimensions (L x W x H): 1172 x 250 x 400 cm Weights Unladen weight: 6,060 kg Payload: 32,000 kg GVW: 38,000 kg Gjdpfx Aswbpwzeaxebw Functional Tipper: Rear Maintenance, History, and Condition General Technical Inspection (GTI): inspected until January 2026 Technical condition: very good Visual condition: very good Further information Contact Bart Mostert or P. Mostert for further information.

Condition: new, empty load weight: 7,890 kg, maximum load weight: 28,110 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,550 mm, loading space height: 2,641 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, wheelbase: 7,850 mm, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Axle manufacturer Jost, aluminum chassis, color grey, air-lift suspension, raise and lower function, lift axle on 1st + 3rd axle, disc brakes, fixed side underride guard, toolbox, 2x LED reversing lights, 4x LED reversing lights on the side (2x per support winch + 2x behind the axle assembly), 1x LED light in the cargo area, broom and shovel holder on the left side underride guard in the direction of travel, Cargofloor control type CF 500 SL-C - E"-CONTROL 10mm ribbed with additional plastic guides below the floor profiles, wing doors (1/2 - 1/2 with door closure cross beam), remote control, rear door impact protection - aluminum impact buffers across the entire width of the rear wall, roof bows and tarpaulin, service hatch front left, working platform with ladder, rolling tarpaulin (PVC tarpaulin Panama quality 900g/m²), cargo securing certificate DIN EN 12642 Code XL, production 5/2025, immediately available Gedpfx Ajwr Nhbsaxobw

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Gbedpsxf Sn Iefx Aaxsw Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,250 mm, Equipment: ABS, bioSTAR 90.6 cbm Deep Black EU conformity Chassis type: moving floor National kingpin load (t): 12 National axle load (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Chassis series: 135 Design-based technical max. gross weight (t): 39 Wheelbase (moving floor semi-trailer, mm): 7850 Internal height front (mm) (IHF): 2641 Internal height rear (mm) (IHB): 2778 Loading length (mm): 13513 Volume (m³): 90.6 Total width (mm): 2550 Total length (mm): 14000 Chassis Chassis material: steel Tyre size: 385/65R22.5 Chassis neck height (mm): 217 Axles: JOST Brake version: disc brake Brake type: JOST - DCA-T7 Offset (ET): 120 1st axle with lift axle and starting aid (option) 3rd axle with lift axle (option) Tyre pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lowering valve Lowering of air suspension via Smartboard, as well as lift/lowering valve Wheels: Alcoa Dura Bright Landing legs: steel gear-type landing legs mounted at the front of the chassis, JOST MODUL type, single-side operation, 2 speed levels Control console: EBS operation on the left in driving direction, behind the axles Lighting manufacturer: Aspöck Lighting type: LED version (2 x 2 round) Hydraulic coupling: rotary coupling Smartboard Air connection mounted in the toolbox Aluminium access ladder 3.80 m - right-hand side in driving direction Loading pressure gauge Ø 63 mm - mounted on the side of the control panel Moving floor system brand: Cargo Floor Air and electrical console mounted centrally in driving direction with gantry Lighting protection: one-piece protective fender Superstructure Front wall inclination (°): 90 Rear wall inclination (°): 90 Rear door type: wing doors Cover plate between floor and front wall: fixed aluminium plate and PVC strips Standard fifth wheel plate (15T) Front wall profile: 3 mm - 2 mm Gedpfx Aoxhanzsaxebw Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Operation of floor system: radio remote control Cargofloor control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 10 mm flat Moving floor closure plate: stainless steel Oil temperature sensor for moving floor system Residue emptying wall Type of residue emptying wall: aluminium Residue emptying wall: brush Residue emptying wall storage: 6 wheels with bidirectional cleaning (cargo floor) Rear wall: aluminium Design of wing door division: 1/2 to 1/2, with door end crossbar Opening of door wings: right-hand door wing opens first (manufacturer choice: STAS) End crossbar of doors: swing type Material end crossbar: aluminium Rear door locking: 1x rotary bar per door leaf Number of door handles - left door leaf: 2 per rotary bar Number of door handles - right door leaf: 1 per rotary bar Securing open door wings: spring holder with plastic protection Rear wall sealing: standard rubber seal Additional lock rear wall: single-acting pneumatic Operation of additional lock: manual via operator control on the side of the control panel Impact protection rear doors: aluminium ram buffer across the entire width of the rear wall Spriegel type: flat round aluminium tube Number and position of spriegels: 3 central spriegels (evenly distributed, centre) and 1 rear spriegel (rear) Curtain holders: multifunctional (rotatable and foldable) 4 pcs Curtain holder positions: right side wall Distance from lower corner profile to upper side wall: au (incomplete)

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5640 Buy, rent, or lease with purchase option upon agreement! Approx. 60 m³ STAS agricultural moving floor trailer with integrated grain hopper / service door / sample extraction slide, etc. ---- * Manufacturer: STAS * Model: FARMSTAR - Agricultural Moving Floor * First registration: - (New vehicle) * Colour: Chassis RAL 9005, Body RAL 7001, Tarp SIO 7500 * Volume: approx. 60 m³ (10.60 m length x 2.48 m width x 2.30 m height) * Axles: 3x SAF axles / 1st axle is a lift axle with traction assist / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25 m * Suspension: Air suspension with lift and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer figures): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with wireless remote control and control console at the rear left * 21-board floor system, 6 mm ribbed * Welded aluminium end caps * Rear closure plate in aluminium * Integrated grain hopper * Additional guides beneath the floor profiles * Residual emptying wall with brushes and stainless-steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and out (grain version), fully welded * Inspection window on the left rear side wall * Double-wing doors (50/50) * 4x locking rods * Swivelling door end crossmember * Hydraulic connections at front with 3 m hoses and * Connection option underneath body without hoses * Pressure 1" female * Return 1" female * Operator’s platform with access at front left and right * Fifth wheel height 1,150 mm * Individual mudguards * Full-load supports * Roll tarp (900 g/m²) with quick-clamp system * Folding aluminium bows * Rear aluminium light protection (foldable) * Aluminium air tank * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left Gbsdpfsxl Ntuox Aaxew * 1x aluminium ladder (2x 8 steps) mounted right * 1x extendable ladder at rear right * Smartboard * TPMS tyre pressure monitoring system * 5-chamber LED tail lights * 2x LED work lights in front of the axles * 2x LED reversing lights at rear * 1x LED work light on inside front wall * 2 x 3-function lights at the top of the rear door crossmember Buy, rent, or lease with purchase option upon agreement! Note regarding possible errors in the listing: Despite careful preparation, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or interim sales. All information is subject to change without notice. Please contact us to verify details or if you have further questions.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 11/2025, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, STAS Biostar moving floor trailer, approx. 92 cbm, equipped with a "Cargo-Floor" moving floor with 21 planks, 10 mm thick, designed for complete emptying (sliding front wall), push-pull function, radio remote control for the moving floor, double-leaf rear doors with rotary locking bars, front access ladder and standing platform on the body, rolling tarpaulin with central locking, side protection tarp, air connection located behind the axles, ABS, EBS, ALCOA Durabright aluminum wheels, SAF Intradisc+ axle(s), first axle liftable, rear steering axle, disc brake system, Wabco Smartboard, air suspension with lift/lowering function, landing gear, stainless steel storage box. Vehicle may be wrapped or labeled with advertising. Our offer does not generally include a new TÜV inspection. Should you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops. Vehicle may be wrapped or labeled with advertising. Our general terms and conditions of delivery and payment apply. Gbedpfxow Nungo Aaxow We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: used, maximum load weight: 31,550 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2002, Equipment: ABS, Fahrzeug-Ident-Nr.: YE6SZ336V200R0665 DE HU due Tare weight: 7,450 kg Volume: approx. 84.0 m³ Dimensions: 13,470 x 2,480 x 2,430 / 2,600 mm SAF axles with disc brakes LIFTACHSE Air suspension Support legs Platform Godpfx Ajvdg Sijaxsbw Roll-up tarpaulin Tires: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel 5 x aluminum rims - 1 x steel rim

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension 430 mm disc brakes SAF (CD) axle units 3x9t with stabilization, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-off aid and manual forced lowering, Smart Board Info Center, lift/lowering valve 11, BVA brake wear indicator, automatic tipper lowering Gedpoxfyb Ajfx Aaxobw Tyres and wheels 6 wheels with tires size 385/65 R 22.5, manufacturer optional, with Alcoa DuraBright 11.75 x 22.5 ET 120, UNI wheel bolts for aluminum rims, wheel nut caps Landing gear Mechanical landing legs with two speeds and 2x20t support load, with swiveling foot for air suspension. Brake system according to E.C. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E 2S/2M incl. RSS (Roll-Stability System) with premium modulator, Wabco Smartboard Info Center, aluminum air reservoir system Electrical system According to StVZO regulations with 4 three-chamber lights (2×2), Aspöck type, 24 volt system with 2x7 and 1x15 pin connectors, with side marker lights, 2 LED Pro Rock work lights switchable, 2 LED work lights each on sides and rear. All air and electrical lines are neatly routed in plastic pipes! Tipper body/bed “watertight” Body fully welded inside Aluminum body, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 8 mm thick high abrasion-resistant alloy (5383H34/HB 110) with 45-degree beveled profile toward the side wall; front wall 4 mm reinforced, straight; rear wall as pendulum tailgate, straight, with LL rubber seal, spindle locks additionally 2x on the sides and 4x at the bottom; 4 pneumatic cylinders (2 open, 2 close), rubber buffers on the tipper body to the frame, mounted at the front wall Hydraulic system Tipping cylinder with “sleeve” mounting Hydraulic cylinder mounted at the front wall with working pressure of 150 bar, Edbro brand, approx. 2.5 m hydraulic hose and 1" quick-release coupling, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete splash guards over the entire vehicle width attached to the underrun protection, aluminum spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, center approx. 150 mm raised, additionally a centrally mounted bows receiver for positioning a total of 2 bows to increase loading width, roll tarp with central light strip and separate reinforcements in high-wear zones, approx. 900 g/m2 quality with quick-release roll tarp system, all-round rubber rope at the rear edge of the tarp with two pull hooks to be fixed on the swing bow; walkway on the frame in chassis color, tarp end at rear with welded-in rubber rope for waterproofing, robust foldable underrun protection in aluminum, 2" "Clear-Pass" splash guards on mudguards according to EC standard, bracket for shovel, broom and scraper mounted above the axles, etc.

Condition: new, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5628 New vehicle in stock – available immediately! Purchase, lease, or rent with a purchase option available upon request! Stas 91 m³ Moving Floor / 10 mm Ribbed Floor / TÜV Load Certificate / Front Service Door / Galvanized Chassis ---- * Manufacturer: Stas * Model: Biostar – moving floor trailer * Year of manufacture: 2025 * Technical gross weight: 42,000 kg * Unladen weight (manufacturer stated): 7,800 kg * Payload: 34,200 kg * Suspension: Air suspension with raise/lower function ECAS * Axles: 3x Jost, with first axle as lift axle and traction assist / disc brakes * Tires: 385/65 R22.5 on Speedline Diamond alloy wheels * EBS * Color: Body white RAL 9010 / Tarp black SIO7999 * Volume: approx. 91 m³ (13.50 m long x 2.47 m wide x 2.82 m high) * Double-wing rear doors with pneumatic locking * Extendable step ladder on right side * Traction assist lift axle operated via truck button * Smartboard * Telescopic landing gears * PVC toolbox 830x500x470 mm * 2 LED reversing lights at the rear left and right * 2 LED reversing lights at rear supports * 1 interior LED front wall light * Ecoled 2 LED rear lights * Cargo Floor, 10 mm ribbed floor CF500SL-C -E Control * Radio remote control * Moving side wall Gbjdpfx Aexhbcgjaxow * Roll tarp with lashing straps Panama 900 g/m² * Side guard curtain * Tarp retainers * Front service door NEW VEHICLE!! Purchase, lease, or rental with an option to buy available upon request! Note regarding possible errors in the listing: Despite careful preparation of this advertisement, mistakes or errors in the descriptions or details may occur. We do not accept liability for mistakes, changes, or prior sale. All information is non-binding. Please contact us to verify details or clarify any further questions.

Condition: used, axle configuration: 3 axles, first registration: 06/2009, loading space length: 11,400 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 63 m³, Chassis Nickchassis cranked (approx. 80-100 mm lower) Made of aluminum, high-quality ALU-MG-silicon alloy, two fully automatic welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm! Axles and Suspension Wheelbase optimized for better trailing performance Jost (DCA) axle units 22.5", 3 x 9 t axles with DCA air suspension, third axle liftable, first axle with start-assist and electric actuation (switch in tractor already available), raising and lowering valve for air suspension, Wabco SmartBoard. Tyres and Wheels 6 wheels, tyres in size 385/65 R 22.5, approx. 50-60% tread on Alcoa aluminum rims, satin finish, ET 120, 11.75 x 22.5 Landing Legs Mechanical landing legs with compensation feet, single-side operation design and 2-speed, 2x20 t support load Brake System According to E.E.C. standards, dual line system Westinghouse, spring brakes affecting two axles and Wabco EBS electronic system with RSS (Roll-Stability-Support), premium modulator, aluminum air tanks. Electrical System Built to StVZO regulations with 2x five-chamber lamps type Aspöck, 24-volt system with 2x 7-pin and 15-pin sockets, side LED contour lights, halogen RF Ix at rear and 1x on stand at the bulkhead separately switchable from outside, Volvo reversing camera (without tractor equipment), all air and electrical lines are neatly routed through plastic conduits! Tipper Body/Tipper Bin Tipper bin fully welded inside, aluminum construction, side walls 30mm/600mm plank profiles, 3 mm inside, 2 mm outside, floor 8 mm extra reinforced wear-resistant (5383H34-HB110) and 45-degree profile, front wall 4 mm straight with interior access ladder, rear wall as double-wing door in straight design with 2 doors, 1/2-1/2 division, each with a grain chute, rear doors partly aluminum smooth cladding, rear crossmember foldable from ALU, two tie-downs with rubber buffer on tipper body fixed to frame at bulkhead, Hydraulic System with Large Sleeve (new in 8.2025) Hydraulic cylinder mounted on bulkhead with operating pressure of 150 bar, make Edbro 150 bar, approx. 2.5m hydraulic hose with quick disconnect 1", tipping angle approx. 48 degrees Godpfxexfn Dre Aaxjbw Accessories 6 PVC mudguards with 2 rubber mud flaps at the rear, retractable splash flap on underrun protection, side impact protection according to StVZO, aluminum spare wheel holder, foldable underrun protection ALU with towing eyes, roof tarpaulin with side tension straps, 2 longitudinal tension straps from catwalk, 30 mm tarpaulin pipe welded centrally into the tarpaulin, rear tarpaulin rest made of aluminum sheet approx. 150 mm, 4 aluminum swiveling bows, 2 plastic toolboxes type 800, approx. 3 m aluminum ladder, catwalk on tipper body with access left and right, 2 plastic chocks with bracket on chassis, small pull-out ladder at rear, separate ALU discharge chute with tarpaulin sack, etc. Offer and pictures are non-binding.