Used Stema Ft Trailers for sale (121)

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A56 GW26GA01430, Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers for 100 km/h with confirmation - all players from BSG Chemie Leipzig have signed here; subsequently coated with UV-resistant clear lacquer * Optimum road holding due to stable chassis with safety V-drawbar Pgsdpoyqdtuofx Aqljr * Robust rubber spring axle with independent wheel suspension * Maintenance-free compact wheel bearings * Solid side walls with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for securing loads (model-dependent) * Sturdy cast steel toggle-clamp fasteners (model-dependent) * Non-slip, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid Low loader by STEMA, type FT 8.5-20-10.1 with lid, gross weight: 850 kg, overrun braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: used, maximum load weight: 630 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2025, loading space length: 2,070 mm, loading space width: 1,145 mm, loading space height: 330 mm, total width: 1,495 mm, total height: 870 mm, A62 GW26RGA30254, type FT 7.5-20-10.1, open platform, WSE01AKC7, gross weight 750kg, 100km/h, jockey wheel installed ...and much more. Vehicle not refurbished. Subject to errors and prior sale. Pedpfx Aqeyqdrkjlogr

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A57 GW26GA01495, Signatures of Eintracht Frankfurt players subsequently sealed with clear lacquer Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers approved for 100 km/h with certification* * Optimal road handling due to stable chassis with safety V-drawbar * Robust rubber suspension axle with independent wheel suspension * Maintenance-free compact wheel bearings * Sturdy side panels with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for load securing (model-dependent) * Robust cast steel angle lever locks (model-dependent) * Slip-resistant, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid/cover Pgodpfx Ajyqdq Hoqler Low-loader, manufacturer: STEMA, type: FT 8.5-20-10.1 with lid/cover, gross weight: 850 kg, inertia braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: new, machine/vehicle number: FT 8.5-20-10.1B, empty load weight: 161 kg, maximum load weight: 689 kg, overall weight: 850 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,080 mm, loading space height: 340 mm, Sideboards, railings, and more - Folding and removable rear panel - With durable and high-quality corrosion protection - Sideboards made of steel sheet with Galvalume (aluminum-zinc coating), single-walled - With robust angle lever locks - Fixed front panel - 34.5 cm high - Stable and durable hinges Attachment option for tarpaulins and nets - Mounted attachment buttons for securing tarpaulins and nets Chassis and frame - Shock absorbers for 100 km/h approval (DE) - Optimal road handling thanks to a test track-approved chassis with STEMA safety V-drawbar - Tow ball coupling with safety indicator - Bolted chassis Loading platform and floor - Continuous, non-slip, and waterproof screen-printed wood floor - 9 mm thick Lighting - Modern multi-function lighting - With reversing light - With rear fog light - 13-pin plug Wheels and axles - Robust rubber spring axle - With reversing automatic - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Equipped with splash guards - Wheel chocks with holder Lashing and securing options - 4 lashing hooks on the loading platform in the floor Pjdpfjhzv Shjx Aqlegr Documents and freight costs - Freight costs to us already included - Incl. vehicle registration document (registration certificate part 2) - Incl. COC document (EC certificate of conformity) - No further unwanted costs - De-rating possible for an extra charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link directly to it, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, machine/vehicle number: 23656, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,080 mm, loading space height: 330 mm, Sideboards, railings, and more - Folding and removable rear wall - Durable and high-quality corrosion protection - Steel sheet sideboards with Galvalume (aluminum-zinc coating), single-walled - With robust angle lever locks - Fixed front wall, 33 cm high - Stable and durable hinges - Mounted snap hooks for securing tarpaulins and nets Chassis and frame - Safety chassis with tilting drawbar - Tow ball coupling with safety indicator - Bolted chassis Loading area and floor - Continuous, non-slip, and waterproof screen-printed wooden floor - 9 mm thick Lighting - Modern multi-function lighting - With rear fog light - 13-pole plug Wheels and axles - Robust rubber suspension axle - Maintenance-free compact wheel bearings Psdpfxohqkcrj Aqlegr - Impact-resistant plastic mudguards - Equipped with splash guards Lashing and securing options - Four lashing points Documents and freight costs - Freight costs to us are already included - Incl. vehicle registration document (Part 2) - Incl. COC document (EC Certificate of Conformity) - No further unwanted costs - Weight reduction possible for an additional charge (pure TÜV fee) You can find more offers and information on our website. I am not allowed to link to it directly, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes, and prior sale are subject to change.

Condition: new, functionality: fully functional, empty load weight: 960 kg, maximum load weight: 1,740 kg, overall weight: 2,700 kg, loading space length: 4,520 mm, loading space width: 1,870 mm, loading space height: 2,040 mm, Stema Profi box trailer STPK O2 27-46-18.2 P20 P-Box with hinged doors Permissible total weight: 2,700 kg Internal box dimensions: 452 x 187 x 204 cm The Stema Profi box trailer P-Box features a very robust plywood construction with 15mm thickness and a smooth GRP exterior wall – perfect for advertising signage! Equipment: - Fixed Polywood construction (15mm) - Side walls, roof and floor panel, 15mm thick - Closed floor made of non-slip screen-printed panels, sealed - Hinged doors, 270° opening, lockable with swivel bar latch - Aluminum profiles with variable lashing points at the top and bottom - Door retainer - Edge profiles on the door opening - Torsionally rigid rear portal - Rain deflector above the door - Maneuvering handles - Braked with automatic reversing function - Heavy-duty support wheel - 13-pole connector with reversing light - Maintenance-free rubber spring axles with independent wheel suspension Pedpfxjzdaadj Aqlegr Optional accessories at an extra cost: - 100 km/h upgrade for €289, including VAT - Rear support for €39, including VAT - Rear ramp instead of hinged door, upon request - Side door, upon request Sales, consultation and collection in Zell by appointment only. We do not have fixed opening hours and instead rely on appointments made at your convenience. This allows us to focus entirely on your needs and ensure personal consultation and a smooth process. Quoted prices for trailers, accessories and construction components may vary due to freight/material surcharge adjustments. Please inquire about availability and final prices. For transport within Germany, we will gladly provide you with our temporary registration plate for €25. TÖFFI Trailers in Zell - A wide selection of new car trailers from the brands Humbaur, Saris, Böckmann, Stema, Pongratz, TPV and WM-Meyer is constantly available, either immediately or in the short term. Also available for online ordering. Subject to prior sale and errors.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Pedpjyn Ucbofx Aqljgr Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: used, maximum load weight: 647 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 04/2016, next inspection (TÜV): 08/2028, loading space length: 2,095 mm, loading space width: 1,265 mm, total length: 2,815 mm, total width: 1,570 mm, total height: 990 mm, Stema MT 0850 Motorcycle trailer Pgodszwkihjpfx Aqlsr Transport trailer Capacity for 3 motorcycles Single-axle First registration: 26.04.2016 Next inspection: 08/2028 Overall dimensions: 2845 mm x 1535 mm x 990 mm Internal dimensions: Length: 2095 mm x Width: 1265 mm Total weight: 850 kg Unladen weight: approx. 203 kg Payload: 647 kg Single-axle 13-inch tires Approved for 100 km/h Steel ramp V-shaped drawbar 13-pin connector Support wheel ATTENTION!!!!! PLEASE READ!!!!! We expressly reserve the right to sell the item in the meantime, as we are also offering it on other platforms. We strongly recommend an inspection and assessment to ensure that the buyer does not have any false impressions about the condition and suitability. Inspections and assessments are possible at any time by appointment and are expressly desired!!! Typographical errors and errors excepted. The stated internal dimensions are approximate values. For new vehicles, there may be additional costs for freight and paperwork. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 9:00 a.m. to 5:00 p.m., Saturday 9:00 a.m. to 2:00 p.m. Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, functionality: fully functional, machine/vehicle number: WSEATBEAAGG000104, empty load weight: 840 kg, maximum load weight: 2,660 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2016, next inspection (TÜV): 12/2026, total length: 5,995 mm, total width: 2,100 mm, total height: 1,030 mm, suspension: other, maximum speed: 80 km/h, color: silver, Year of construction: 2016, For sale is a Stema AT 2035 car transport trailer, first registered in 09/2016, from a private owner. The trailer is fully functional and in well-maintained, used condition. Technical data according to the vehicle registration document: permissible total weight 3,500 kg, unladen weight 840 kg, payload 2,660 kg. Tandem axle with 2 × 1,750 kg axle load, overrun brake, and tires 195/50 R13C. Dimensions: 5,995 × 2,100 mm. The trailer has a Tempo-100 approval (valid with a suitable towing vehicle: ABS and a minimum unladen weight of 3,182 kg or 2,917 kg with a special stability system for trailer operation). Valid technical inspection until 12/2026. Viewings are possible at any time by appointment in Bad Kissingen. Pgedpfxszv Snpj Aqlor For sale only to commercial buyers! Invoice with VAT (19%) will be issued.

Condition: used, functionality: fully functional, Year of construction: 2023, STEMA MT 0750 Vehicle Transporter – Consignment Sale For sale is a STEMA MT 0750 vehicle transporter, first registered in 04/2024. The trailer has been derated from its original technically permissible total weight of 750 kg to 650 kg. The corresponding DEKRA certificate is available. - Permissible total weight: 650 kg - Tare weight: approx. 133 kg - Payload: approx. 517 kg - 1 axle - 100 km/h approval - Overall length: 2,910 mm - Overall width: 1,550 mm - Tires: 145/80 R13 - Vehicle transporter - Support wheel Pgedjzwf Dtspfx Aqlsr - First registration: 04/2024 Sold on behalf of a customer / consignment sale. Price: €1,090

Condition: used, maximum load weight: 2,681 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 08/2021, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 200 mm, total width: 2,400 mm, total height: 2,100 mm, Car transporter body, hot-dip galvanized, V-drawbar, shovel holder, 20 cm high welded side walls, walkable steel mudguards, 4 lashing profiles per side, aluminum checker plate floor, rear loading ramp, "Stema/Knott" axle(s), shock absorbers, heavy-duty jockey wheel, overrun brake, handbrake. Vehicle may be fitted and/or labeled with advertising. SI86465 Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Vehicle may be fitted and/or labeled with advertising. Our general delivery and payment conditions apply. Psdpfx Aqey Nu Nlologr We would be happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 2,681 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 08/2021, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 200 mm, total width: 2,400 mm, total height: 2,100 mm, Car transporter body, hot-dip galvanized, V-drawbar, shovel holder, 20 cm high welded side walls, walkable steel mudguards, 4 lashing profiles per side, aluminum checker plate floor, rear loading ramp, "Stema/Knott" axle(s), shock absorbers, heavy-duty jockey wheel, overrun brake, handbrake. Vehicle may be fitted and/or labeled with advertising. SI86465 Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Vehicle may be fitted and/or labeled with advertising. Our general delivery and payment conditions apply. We would be happy to provide you with a financing or leasing offer for this item. Please contact us! Podpfx Ajy Nu Rvsqlsgr

Condition: used, maximum load weight: 2,094 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 1,960 mm, total height: 1,020 mm, A12 GW26NG000301 Psdpfx Aoym Igwsqljgr High-bed tandem trailer, manufacturer STEMA, type SySTEMA SH .2, gross weight: 2,700 kg, High-loader with low frame, 4.01 m x 1.83 m, 10" tyres, 100 km/h approval Loading height: 600 mm Subject to errors and prior sale.

Condition: new, functionality: fully functional, maximum load weight: 2,500 kg, overall weight: 3,500 kg, loading space length: 4,520 mm, loading space width: 1,870 mm, loading space height: 2,040 mm, Stema Profi box trailer STPK O2 35-46-18.2 P20 P-Box with double doors Permissible total weight: 3,500 kg Box interior dimensions: 452 x 187 x 204 cm The Stema Profi box trailer P-Box features a very robust plywood structure with 15mm thickness and a smooth GRP exterior wall – perfect for advertising signage! Equipment: - Solid Polywood structure (15mm) - Side walls, roof and floor 15mm thick - Closed floor made of non-slip screen-printed panels, sealed - Double doors that can be opened 270°, lockable via rotating bolt - Aluminum profiles with variable lashing points at the top and bottom - Door latch - Edge profiles on the door opening - Torsion-resistant rear portal - Rain deflector above the door - Handling grips - Braked with automatic reversing function - Heavy-duty support wheel - 13-pin connector with reversing light - Maintenance-free rubber suspension axles with independent wheel suspension Optional accessories at an extra charge: - 100 km/h upgrade for 289,- Euro incl. VAT - Rear support for 39,- Euro incl. VAT - Rear ramp instead of double doors on request - Side door on request Pedszdaaqspfx Aqljgr Sales, consultation and pick-up in Zell by appointment. We do not have fixed opening hours, but instead offer appointments as desired. This allows us to focus entirely on your needs and provide personal advice and ensure a smooth process. Quoted prices for trailers, accessories and construction components may vary due to freight/material surcharges. Please inquire about availability and final prices. For transport within Germany, we will gladly provide you with our temporary registration plate for 25,- Euro. TÖFFI Anhänger in Zell - A large selection of new car trailers from the brands Humbaur, Saris, Böckmann, Stema, Pongratz, TPV and WM-Meyer is always available immediately or in the short term. Also available for online order. Subject to prior sale and errors.

Condition: used, maximum load weight: 2,050 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 10/2025, next inspection (TÜV): 10/2027, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,070 mm, Used Tilt Car Transporter from Stema Model: Atour 2 ATH 27-40-21.2 Used vehicle – Made in Germany. First registration: 10/2025 Next inspection (HU): 10/2027 Load area dimensions: 4.00 x 2.01 m Gross vehicle weight: 2,700 kg Payload: 2,050 kg Nearly new tilt car transporter, first registered in October 2025. Hardly used and equipped with shock absorbers for 100 km/h upgrade. Equipment: - Includes 100 km/h type approval - Tiltable Pgodpfx Ajy Axt Uoqljr - Loading ramps integrated in ramp bays - 195/55R10C tyres for low entry angle - Mechanically tiltable with 2 dampers - High-quality German brand axles and brakes - Overrun brake with automatic reverse function - Reversing lights - Galvanized tilt bed - 2 robust loading ramps - V-drawbar - Heavy-duty jockey wheel - Torsion-resistant longitudinal beam (bridge carrier) - Chassis: hot-dip galvanized bolted/welded construction - Optimal safety concept with three side marker lights on each side Accessories: - Winch with mounting bracket available for an additional €399 - Spare wheel (loose) available for an additional €129 Sale, consultation, and collection in Zell by appointment. Please note: Due to ongoing material shortages among suppliers, the quoted prices for trailers, accessories, and components may currently vary due to material surcharges. Subject to prior sale and errors. Please inquire about availability and final prices. TÖFFI Trailer Wholesale – Always a wide selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer immediately or shortly available. Also orderable online. For transport home, we are happy to provide our transfer plates at a fee of €20. Delivery within Germany possible for an extra charge!

Condition: new, maximum load weight: 850 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,530 mm, total width: 2,220 mm, Stema WOM XT Tilting Trailer STS XT .1 New vehicle - Made in Germany. Loading area dimensions: 2.51 x 1.53 m Gross vehicle weight rating: 1,300 kg Payload: 850 kg Features: * Low-loader with pivoting axle and latest kinematics * Suitable for up to 2 motorcycles * Lashing rail embedded centrally in the floor * Robust 3-sided railing (10 cm high) on left and right for securing tie-down straps * Excellent road handling thanks to stable chassis with safety V-drawbar, independent wheel suspension, and maintenance-free compact wheel bearings * Durable, anti-slip, and waterproof resin-coated plywood flooring * Sturdy welded and hot-dip galvanized frame * Automatic jockey wheel * Overrun brake with reverse automatic Accessories: Podpox T Sckofx Aqlsgr * 100 km/h upgrade with shock absorbers for €150 incl. VAT * Extension side boards (35 cm) for €590 incl. VAT * Motorcycle clamp for €120 incl. VAT * Additional lashing rings on loading area available at extra cost (see pictures) The WOM tilting trailer is also available with high tarp and frame (prices on request). Sales, consultation, and pickup in Zell by appointment only. Please note: Due to the current shortage of materials at suppliers, the offered prices for trailers, accessories, and components may vary due to material surcharges. Subject to prior sale and errors. Please inquire about availability and final prices. A large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer always available or available at short notice. Also available for online order. For home transport, we can gladly provide you with a temporary license plate for €20. Delivery within Germany is possible for an additional charge!

Condition: new, maximum load weight: 2,050 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,070 mm, Stema Autotransporter Atour 2 ATH 27-40-21.1 New vehicle – Made in Germany. Loading area dimensions: 4.00 x 2.01 m Permissible total weight: 2,700 kg Payload: 2,050 kg Features: * Tiltable * Loading ramps in ramp compartments * 195/55R10C tires for low approach angle * Mechanically tiltable with 2 dampers * High-quality German-brand axles and brakes * Overrun brake with automatic reversing function * Reversing lights * Galvanized tipping platform * 2 robust loading ramps * V-drawbar * Heavy-duty jockey wheel * Torsion-resistant longitudinal beam (bridge beam) * Chassis: hot-dip galvanized bolted and welded construction * Optimum safety concept with three side marker lights per side Accessories (on request): Pgsdpfxex T R Eko Aqlsr * 100 km/h upgrade for €250 incl. VAT * Winch with winch stand for €450 incl. VAT * Spare wheel (loose) for €139 incl. VAT * Closed in the center with wooden floor for €299 incl. VAT Sales consultation and collection in Zell by appointment. Please note: Due to the current material shortages among suppliers, the quoted prices for trailers, accessories, and components may vary due to material surcharge fees. Subject to prior sale and errors. Please inquire for availability and final prices. Always a large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer available immediately or at short notice. Also available to order online. For return transport, we are happy to provide you with our transfer license plate for €20. Nationwide delivery within Germany available for an additional charge!

Condition: new, maximum load weight: 2,300 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,010 mm, total width: 2,070 mm, Stema Atour Grande ATH 30-49-21.2 New vehicle - Made in Germany. Loading area dimensions: 4.90 x 2.01 m Gross vehicle weight rating: 3,000 kg Payload: 2,300 kg Ideal for fast loading and unloading – no loading ramps required. Simple: Tilt, drive up the vehicle, drive off! Equipment: * 4.90 m tiltable load area * Including winch bracket * 195/55R10C tyres for a low loading angle Pedpex T R N Nofx Aqlsgr * Mechanically tiltable with 2 dampers * High-quality German branded axles and brakes * Overrun brake with automatic reverse function * Reversing lights * Galvanised tipping platform * 2 robust loading rails * V-drawbar * Heavy-duty jockey wheel * Torsion-resistant longitudinal girder (platform beam) * Chassis: hot-dip galvanised bolted and welded design * Optimised safety concept with three side marker lights on each side Accessories (on request): * 100 km/h upgrade for €289 incl. VAT * Winch for €250 incl. VAT * Spare wheel (loose) for €139 incl. VAT * Centre section closed with wooden floor for €299 incl. VAT Sales, consultation, and collection by appointment in Zell. Please note: Due to the current material shortages at our suppliers, listed trailer, accessory, and component prices may vary due to material surcharges. Subject to prior sale and errors. Please enquire about availability and final prices. A wide range of new car trailers from the brands Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer always available immediately or at short notice. Also available for online ordering. For self-transport, we are happy to provide our transit license plate for €20. Delivery within Germany available for an additional charge!

Condition: new, maximum load weight: 623 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,950 mm, loading space width: 1,080 mm, Stema Motorcycle Trailer MT Classic 750 The classic among motorcycle transport trailers. Low loading platform with a long loading ramp for easy loading and unloading. Equipped with two wheel rails complete with hoops, and a loading ramp, all made from hot-dip galvanized steel. * Suitable for up to 2 motorcycles * Fully galvanized safety chassis with V-drawbar * Maintenance-free rubber torsion axle * Steel mudguards * 8 lashing rings Pgedpfxex T R Tue Aqler A jockey wheel is available from us for €39 including VAT. Sales, consultation, and collection in Zell by prior appointment. Please note: Due to the current material shortages at suppliers, trailer, accessory, and component prices may vary due to surcharges for increased material costs. Subject to prior sale and errors. Please inquire about availability and final prices. We always have a large selection of new car trailers from brands such as Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer available immediately or at short notice. Also available to order online. For home transport, we are happy to provide you with our transfer license plate for €20. Delivery within Germany is available for an additional charge!

Condition: new, maximum load weight: 506 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,280 mm, loading space height: 350 mm, total width: 1,740 mm, Stema Rex Tipping Trailer with Loading Ramp STP O1 7.5-25-13.1 RW700 New vehicle – Made in Germany. Loading area dimensions: 2.51 x 1.28 m Gross vehicle weight: 750 kg Payload: 506 kg Unbraked tipping box trailer made of galvanized steel. The REX is the ideal trailer for transporting small vehicles and for landscapers, caretakers, or anyone looking for a multifunctional trailer. Equipment: * Unbraked tipping trailer, continuously adjustable * Sturdy loading ramp, double-walled (500 kg load capacity) * Telescopic support with hand crank at the front * Securing tension lock for the loading floor * Extra thick, phenolic resin-coated and durable loading floor * Six robust, recessed lashing eyes in the frame * Jockey wheel * STEMA safety V-drawbar * Robust rubber suspension axle with independent wheel suspension for optimal road handling * Maintenance-free compact wheel bearings * 7-pin plug (EU equipment) * Hook-in buttons for tarpaulins or nets Pgodpfx Aqjx T R Irsljr Accessories: * Mesh cage (66 cm) for 599 euros incl. VAT (see pictures) Sales, consultation and pickup in Zell by appointment. Please note: Due to the current material shortages at suppliers, the offer prices for trailers, accessories and components may currently vary due to material surcharges. Subject to prior sale and errors. Please inquire for availability and final prices. Constantly a large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer available immediately or at short notice. Also orderable online. For self-transport, we will gladly provide you with our temporary registration plates for 20 euros. Delivery within Germany available at extra cost!

Condition: new, functionality: fully functional, maximum load weight: 1,265 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,570 mm, loading space height: 1,840 mm, Year of construction: 2026, Equipment: tail-lift, Scope of delivery: 1x STEMA box trailer with ramp 2000kg - STPK O2 20-30-15.2.P18.1 ramp downward P-Box Description: Chassis & Frame: - Trailer hitch with safety indicator - Welded and hot-dip galvanized main frame - incl. jockey wheel - Number plate holder with mounting frame and bar - with parking supports Box body: - 15 mm thick plywood panels made from multi-layered wood with white PVC coating - Aluminum profiles with adjustable lashing points Door version: Ramp opens downward - Door hinges, galvanically zinc-plated - Lockable bar lock - Maneuvering handles Loading platform and floor: - Continuous, non-slip and waterproof screen-printed plywood floor - 15 mm thick - Additional cross-members for floor support Lighting system: - 13-pin plug, EC equipment - Modern multifunctional lighting - with rear fog lamp - with reversing light - Marker lights Wheels and Axles: - Robust rubber suspension axle - Maintenance-free compact wheel bearings - Impact-resistant plastic mudguards - Chocks with holder Lashing and securing options: - 4 lashing rings integrated in aluminum profile (individually adjustable) Technical Data: - braked Podpfx Aqoxyzwusljgr - jockey wheel Usable dimensions (L x W): 305 × 157 cm Outside dimensions (L x W x H): 479 × 206 × 241 cm Box height: 184 cm Loading height: 54 cm Ramp load: 1,300 kg Payload: 1,265 kg Permissible total weight: 2,000 kg Wheel size: 13" Material type: Plywood (wood) Low loader / High loader: Low loader

Condition: used, maximum load weight: 1,004 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 1,960 mm, total height: 1,000 mm, A58 GW26GA00050, high-loader, manufacturer STEMA, model SySTEMA SH .1, gross weight: 1,500 kg, open platform, 3.01 m x 1.83 m, 100 km/h, overrun braked, low chassis... and much more. Errors and prior sale excepted. Pgedpfoyqdrdox Aqlor

Condition: used, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,750 mm, loading space height: 345 mm, total width: 2,010 mm, total height: 680 mm, A40 NG000588, Psdpfx Aqeyn Uhkslegr Three-way tipper trailer with tandem axle, manufacturer STEMA, model TRIUS SHDK .2 Zink-BW, gross weight: 3,500 kg, high-loader, hydraulically tiltable with electric pump, rear pendulum tailgate, 3.01 m x 1.83 m. 3,500 kg, overrun braked, high-loader, electric pump, aluminum paneling, rear pendulum side panel. Errors and prior sale excepted, vehicle not prepared.

Condition: used, maximum load weight: 1,955 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,940 mm, loading space width: 1,810 mm, loading space height: 1,890 mm, total width: 2,310 mm, total height: 2,415 mm, A44 GW26PGA00230, box trailer by STEMA, type STPK.2.P18.2, P-Box, gross weight: 2,700 kg, low loader, overrun braked, 2 wing doors, 3.05 m x 1.55 m x 1.89 m. Subject to errors and prior sale. Pedpfx Aqoyqdrqelsgr

Condition: used, maximum load weight: 1,205 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,940 mm, loading space width: 1,570 mm, loading space height: 1,840 mm, total width: 2,050 mm, total height: 2,405 mm, A43 GW26PGA00760, Box trailer manufactured by STEMA, model STPK .2.P18.2, P-Box, WSETK0P04 Gross weight: 2,000 kg, low loader, 2 wing doors, 3.05 m x 1.55 m x 1.95 m ...and much more. Box: Pedpeyqdtnsfx Aqlogr - Ventilation slots for optimal air circulation - 15 mm thick plywood panels made from multi-layer wood, white PVC coated - Aluminium profiles with variable lashing points - Door configuration: wing doors - Door hinges, galvanized - Lockable rod locking system - Manoeuvring handles Loading area and floor: - Continuous, anti-slip and waterproof phenolic resin-coated plywood floor - 12 mm thick - Additional crossbeams to support the floor Lighting system: - 13-pin plug, EC specification - Modern multifunctional lighting - With rear fog lamp - With reversing light - Marker lights Subject to errors and prior sale.