Used Other Platform Semitrailers for sale (153)

Condition: used, color: yellow, Year of construction: 2012, Fellechner SP 31-G43. Year of manufacture: 2012. SAF axles, 9 tons. Unladen weight: 7,090 kg. Payload capacity: 35,910 kg. Gross vehicle weight: 43,000 kg. Kingpin load: 16,000 kg. Gbodpfx Aoynaigskzsl Air suspension. Spare tyre. EBS, ABS, ALB. Dimensions: Neck: Length: 3,850 mm Width: 2,550 mm Height: 1,500 mm Kingpin height: 1,400 mm Loading area: Length: 8,800 mm Width: 2,550 mm Height: 1,300 mm Tyres: 385/65R22.5, 80% tread remaining. German trailer! ID No.: 570. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, as well as to all agreements and preliminary negotiations. By responding in any manner you agree to the applicability of the General Terms and Conditions of Heinhuis and declare that you have acknowledged these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2012 Unladen weight: 7,090 kg Payload: 35,910 kg GVW: 43,000 kg = Company information = For more information: WhatsApp:

Condition: used, machine/vehicle number: 3W640710, first registration: 10/2003, tire size: 385/65 R22.5, axle configuration: 3 axles, color: other, suspension: air, total length: 13,100 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2003, Equipment: crane, Chassis Gbedju H Ehlopfx Akzol Chassis height: 100 cm Diameter coupling pin / coupling plate: 2 inch Structure Dish height: 120 cm Platform: ✓ Tank Fuel: ✓ Crane Number of hydraulic extensions: 1 Rotator: ✓ Squeeze Box: ✓ Maximum crane load capacity : 1580 kg at 507 cm, 2130 kg at 377 cm, 3900 kg at 213cm Maximum crane reach: 507 cm NON-DUTY FREE VEHICLE, REQUIRES CUSTOMS CLEARANCE // Atlas 3008 loading crane with grapple and rotator, Moveable over entire trailer lenght, 1 Hydraulic extension, Max. loading capacity 1580 kg at 507 cm, 2130 kg at 377 cm, 3900 kg at 213 cm, Hatz 2L41C aux. diesel engine // 3-axle platform trailer, Loading height 145 cm, ABS, Saf axles, Disc brakes, 1st axle lifting axle, 3rd axle steering axle, Air suspension, Shipment dimensions: 1310x255x395 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Saf Brakes: disc brakes Suspension: air suspension Axle 1: Lift axle; Tyre profile left: 20%; Tyre profile right: 25% Axle 2: Tyre profile left: 20%; Tyre profile right: 30% Axle 3: Steering; Tyre profile left: 30%; Tyre profile right: 45% Weights GVW: 39.000 kg Functional Crane: Atlas 3008 Make of bodywork: Fruehauf Height of cargo floor: 145 cm Identification Registration number: C142530 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, machine/vehicle number: ST7715, first registration: 09/2011, tire size: 385/65 R22.5, axle configuration: 3 axles, color: other, suspension: air, total length: 12,600 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2011, Equipment: crane, Structure Gbodpfeu H Eu Ssx Akzel Dish height: 120 cm Platform: ✓ Platform size: 535 cm x 255 cm (2x) Crane Remote control: ✓ Number of support legs: 4 Number of hydraulic extensions: 3 Load Hook: ✓ Rotator: ✓ Maximum crane load capacity : 9590 kg at 4.6 m; 6840 kg at 6.3 m; 5210 kg at 8.2 m; 4170 kg at 10.2 m Maximum crane reach: 10.2 m horizontal hydraulic reach Chassis Disc brake: ✓ Chassis height: 100 cm Diameter coupling pin / coupling plate: 2 inch Tank Fuel: ✓ HMF 4720 K3 crane with hook and rotator, 3 hydraulic extensions, 9590 kg at 4.6 m; 6840 kg at 6.3 m; 5210 kg at 8.2 m; 4170 kg at 10.2 m, 4 support legs, Remote control, Year of manufacture 2011, Hatz MC 714 diesel engine // Platform dimensions: 2x 535 cm x 255 cm, Loading height 140 cm, Headboard height 100 cm // Air suspension, Mercedes axles, Disc brakes, ABS, Shipment dimensions 1260x255x380 cm. = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 25% Axle 2: Tyre profile left: 70%; Tyre profile right: 60% Axle 3: Tyre profile left: 45%; Tyre profile right: 55% Weights GVW: 39.000 kg Functional Crane: HMF 4720 K3, year of manufacture 2011 Make of bodywork: MTE Height of cargo floor: 140 cm Identification Registration number: C328126 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, functionality: fully functional, Year of construction: 2026, WİNCH FLATBED SEMI TRAİLER. Gbodeyq Dktspfx Akzel Lider Trailer for Heavy-Duty Trailers High Quality and Durability Manufacturing EBS or Double Line Brake Systems. EU Standards One-year warranty for manufacturing defects. Customer Requested Colour. 2026 Production

Condition: new, functionality: fully functional, empty load weight: 10,000 kg, maximum load weight: 60,000 kg, Year of construction: 2026, operation weight: 50,000 kg, Equipment: ABS, Special Design Flatbed Semi-Trailer. Lider Trailer for Heavy-Duty Trailers High Quality and Durability Manufacturing EU Standards EBS or Double Line Brake Systems. Gbjdpfeyq Dh Eox Akzol One-Year Warranty for Manufacturing Defects. Brake System: Designed according into the european standards Double Line Brake Systems are used on equipped with automatic brake adjustment brake chambers (30 cylinder), Brake Drum(430x220 mm) axle system.There are two pieces of replecable protective brake sockets. 2026 Production

Condition: new, functionality: fully functional, empty load weight: 10,000 kg, maximum load weight: 50,000 kg, tire size: 385/65 R 22,5, Year of construction: 2026, Equipment: ABS, Heavy-Duty Flatbed Semi-Trailer. Lider Trailer for Heavy-Duty Trailers. High Quality and Durability Manufacturing EU Standards EBS or Double Line Brake Systems. One-Year Warranty for Manufacturing Defects Customer Requested Colour. Godpoyq Dguefx Akzjbl 2026 Production

Condition: used, empty load weight: 6,950 kg, maximum load weight: 31,050 kg, overall weight: 38,000 kg, first registration: 06/2007, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,710 mm, loading space volume: 91 m³, color: grey, fuel type: diesel, gearing type: mechanical, Tare weight: 6,950 kg, Gross permissible weight: 38,000 kg, Loading bay (L W H): 13,630 mm x 2,480 mm x 2,710 mm, Loading volume: 91 m³, SEMI-TRAILER WITH PLATFORM Gsdpfeuppqzex Akzobl

Condition: used, Nooteboom Super Wing Carriers. Year: Unused. For transporting from windmill blades longer than 65 meter. Gedjyknzijpfx Akzsbl Lenght: 3 x 11.628 mm. Weight: 3 x 2000 kg. Packet price € 12.500,-! ID NR: 633. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Company information = For more information: WhatsApp:

Condition: used, axle configuration: 3 axles, first registration: 11/2011, total length: 13,710 mm, total width: 2,550 mm, wheelbase: 9,110 mm, Year of construction: 2011, Equipment: ABS, = Additional options and equipment = Gbodpfx Aeyi Uw Iskzel - Air suspension = Further information = Unladen weight: 6,500 kg Payload: 32,500 kg Gross vehicle weight: 39,000 kg Loading platform height: 120 cm Damage: none License plate: OL-65-LH

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable loading area: Loading area with hardwood planks with rear slope of approx. 1,000 mm x 8°    1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm     2 pairs of lashing rings (LC 5,000 daN)    1 pair of lashing rings (LC 10,000 daN)    6 pairs of lashing rings that can be folded outwards (LC 5,000 daN)    2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)    Cut-outs in the outer frame of the loading area for attaching tensioning straps. (LC 2,000 daN)     Braking system:    Braking system in accordance with EU regulations with EBS-E (2S2M) Painting:    First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer     Gsdpfek Eammex Akzjbl A high-quality 2-component (2K) top coat in a single color in Nova gray Rear section metallized and painted in RAL 9010 (pure white)     No metallic painting possible     Seatposts:     JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load)     Steel construction:     Steel construction made of high-strength fine-grain steels     Steel qualities:     S355J2+N/S355MC (yield point 355MPa)    S690QL/S700MC (yield point 690MPa)    Electrical system:    Electrical system in accordance with EU regulations, lighting 24 volts    Sockets 24N, 24S & 15-pin    Axles and tires:    BPW axles, air-suspended, with disc brakes (377 mm), with lifting/lowering function    The self-steering axles with electromagnetic reversing lock can be activated via reverse gear or manually    Axle tool    Tires 435/50 R 19.5    Accessories included:    Yellow-red air couplings on the galvanized connection strip at the front    4 wheel chocks with brackets    2" kingpins    A galvanized steel bulkhead approx. 1600 mm high. EN12642-XL    White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red    Loading area with strong hardwood floor    9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area    1 spare wheel holder under the loading area on the right in the direction of travel    Galvanized folding supports under the slope of the loading area    Sliding hanging rails for aluminum loading ramps at the rear of the vehicle    European reflector signs (red-yellow) at the rear of the trailer    A mud flap at the rear of the trailer    A bracket for a rotating beacon at the rear of the trailer    On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs including a socket    A tool box HDPE 620x360x610 under the loading area on the left in the direction of travel    4 pairs of WADER container pockets in the loading area, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition Speed sticker 80 km/h at the rear and on both sides Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light. A holder for a rotating beacon on the warning signs Load gauge for determining the axle loads including load diagram HRM metallization (high resistance metallization) of the outer frame Complete steel construction shot blasted, then the defined visible areas in metallization

Condition: new, empty load weight: 11,300 kg, maximum load weight: 36,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/65 r 22,5, color: grey-black, Equipment: ABS, Cargo bed: Loading platform in extendable design with pneumatically operated locking mechanism There is an approx. 250 mm wide fixed intermediate table on the middle carrier Gbodpfehlz Shox Akzsl 8 pairs of lashing rings can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Axles and tires: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lifting and lowering valve Axle tool 6-wheel tires 385/65 R 22.5 Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) Seat posts: JOST seat posts (mechanical) with 2-speed gearbox for 24 tons lifting load (50 tons test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Accessories included: A bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket Re-steering can be operated from the front and rear using a cable remote control via pushbuttons, with toe-in control for the axles Electro-hydraulic unit 4 wheel chocks with holder on the bulkhead 2" kingpin One galvanized steel bulkhead approx. 2,200 mm high Yellow-red air couplings on the galvanized connection strip at the front White reflector tape in accordance with EU regulations on the side, on the pull-out and at the rear Red European reflector plates (red/yellow) at the rear of the trailer A mud flap at the rear of the trailer Manual and description A bracket for a rotating beacon at the rear of the trailer Loading area with approx. 30 mm thick wooden floor edged in omega profiles 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel 6 pairs of WADER container pockets in the cargo bed, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, an additional locking point is provided in the pull-out for a 45ft container 5 pairs of stanchion pocket rails, mounted transversely in the loading area, for 100 x 50 mm stanchions One galvanized bracket transversely under the cargo bed (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE 1,200 x 500 x 480 mm toolbox at the front under the cargo bed on the left in the direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease and removable protection around the pump Red/white reflective tape in the load platform extension A layer of sand painted onto the central beam to prevent slipping Radio remote control for the steer

Condition: new, empty load weight: 9,600 kg, maximum load weight: 53,400 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, loading space length: 12,400 mm, loading space width: 2,540 mm, loading space height: 1,340 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Equipment: ABS, Loading area: -Loading area with approx. 30 mm thick hardwood floor -10 pairs of lashing rings can be folded outwards Seat posts: -JOST seat posts with 2-speed gearbox for 24 t lifting load Axles and tires: -BPW axles, techn. 10,000 kg, first axle rigid, all other axles hydro-mechanically forced steered, mounted on turntable -Air-sprung with lifting and lowering valve -axle tool -385/65 R22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC -S690QL/S700MC Electrical system: -Electrical system in accordance with EU regulations, 24 volt lighting -ASPÖCK UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: -First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component top coat in a single color in nova grey -Rear part metallized and painted in RAL 9010 Accessories included: -Loading area with approx. 30 mm thick hardwood floor -2" kingpin -One galvanized steel end wall approx. 1,200 mm high EN12642-XL -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the front wall -Storage for 1,000 mm stanchions in the rear central support -On the gooseneck and on the rear panel on the left and right, one bracket each for the warning signs including socket -Reverse steering can be operated from the front and rear via cable remote control using pushbuttons, with tracking control of the axles -Electric hydraulic unit -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -12 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -European reflector plates at the rear of the trailer -One bracket for a rotating beacon at the rear of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -TPMS tire pressure monitoring system: -For correct display, the motor vehicle must be able to transmit and display this data -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control -5 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions Gbodpfx Akjrq Dlfezel -Speed stickers 80 km/h at the rear and on both sides -Adjustable access ladder mounted on the left and right in the direction of travel -2 reversing lights mounted on the rear panel -Load manometer for determining the axle loads including load diagram HRM metallization of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/2025, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 1,390 mm, total length: 21,000 mm, total width: 2,540 mm, total height: 1,390 mm, suspension: air, Year of construction: 2025, Equipment: ABS, = Additional options and equipment = - Air suspension - Central lubrication = Further information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle; Steered Rear axle 2: Steered Rear axle 3: Steered Weights Unladen weight: 8,700 kg Payload: 39,300 kg Gross vehicle weight: 48,000 kg Functionality Extendable body: Yes Condition Technical condition: very good Visual condition: very good Financial information Gsdjx Awfyjpfx Akzjbl Price: On request Further information Contact David F Middelman for more information.

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading area: -2 pairs of lashing rings can be folded outwards (LC 5,000 daN) 24 pairs of cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, air-sprung, with disc brakes (430 mm), with lifting/lowering function -385/65 R 22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) -No metallic paint finish possible Steel construction: -steel construction made of high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690Mpa) Electrical system: -Electrical system according to EU regulations -Lighting 24 Volt -ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets -Connection according to ISO. -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes with bracket -2" kingpin -One galvanized steel end wall approx. 1,600 mm high. EN12642-XL -White reflector tape in accordance with EU regulations on the side of the trailer and red at the rear -European reflector plates (red/yellow) at the rear of the trailer -Loading area with approx. 30 mm thick hardwood floor edged in omega profiles -10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Storage for 1,000 mm stanchions, at the rear in the central support -1 Spare wheel holder under the cargo bed on the right in the direction of travel -One mud flap at the rear of the trailer -Manual and description on USB stick -One bracket for a rotating beacon at the rear of the trailer -One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container. Flush with the rear -Speed stickers 80 km/h at the rear and on both sides Gbjdpfx Ajiu Etkjkzol -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with one LED position light -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 8,300 kg, maximum load weight: 36,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,080 mm, suspension: air, tire size: 385/65 R 22.5, color: grey, Equipment: ABS, tail-lift, Cargo bed: Cargo bed in extendable design with pneumatically operated locking mechanism Cut-outs in the outer frame of the cargo bed for attaching tensioning straps Seat posts: JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load Axles and tires: BPW axles, air-sprung, with disc brakes (430 mm), with raise/lower function The self-steering axle with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool 385/65 R 22.5 tires Brake system: Gjdpfx Asikyh Hokzobl WABCO brake system in accordance with EU regulations with EBS-E Paint finish: First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 Metallic paint is not possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: Electrical system according to EU regulations Lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Accessories included: Yellow-red air couplings on the galvanized connection strip at the front One galvanized steel end wall approx. 1,600 mm high. EN12642-XL 4 restraint shoes with bracket White reflective tape in accordance with EU regulations on the sides, on the extension and at the rear in red European reflector plates at the rear of the trailer Loading area with approx. 30 mm thick hardwood floor edged in omega profiles 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description A bracket for a rotating beacon at the rear of the trailer A holder for the warning signs including socket on the gooseneck and on the rear plate on the left and right respectively A layer of sand painted onto the central beam to prevent slipping 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container in the pull-out, an additional locking point is provided for a 45ft container 4 pairs of stanchion pocket rails, mounted transversely in the loading area, for 100 x 50 mm stanchions One galvanized bracket transversely under the cargo bed 2,390 x 720 x 400 mm Access ladder mounted on the right in the direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Load manometer for determining the axle loads including load diagram HRM metallization of the outer frame Complete steel construction shot-peened, then the defined visible surfaces hot-finished in metallization with ZINACOR 850

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Gooseneck, length approx. 4,100 mm with central support -Loading area in extendable design, length approx. 9,500 mm with bevel at the rear approx. 350 mm x 10° and integrated hanging bar for attaching loose aluminum loading ramps -Pneumatic locking with conical locking bolts and reinforced locking positions -The supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Axles, suspension and tires: -BPW axles and suspension, all axles hydro-mechanically forced steered -Mounted on a turntable -Technical axle load: 12,000 kg -Air suspension with raising and lowering valve -Tires 235/75 R17.5 twin tires Paint: -6-K final treatment -Complete Steel construction shot blasted after welding -One layer of zinc-based base paint, one layer of primer -Final coating with 2 layers of 2-component paint (acrylic) in one color in MB 7350 Nova gray, then sealing of the cavities with special wax Steel construction: -Steel construction made of high-strength fine-grain steel -Steel qualities: Gedpfx Aksiuy Nlozsbl -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) -Welder tested according to DIN-EN 287-1 -MAG welding process according to EN ISO 4063, M21 protective gas according to EN ISO 14175 Accessories: -Front wall made of steel, approx. 1,600 mm high -Round NATO socket on the front connection strip -3 kW electro-hydraulic unit for controlling the Hydraulic processes -4 pairs of recessed lashing rings in the outer frame of the gooseneck -4 pairs of stake pockets embedded in the outer frame of the gooseneck, for stakes approx. 100x50 mm -1 stake pocket strip mounted transversely in the loading floor of the gooseneck, for stakes approx. 100x50 mm (1x at the back of the gooseneck) -2" king pins -Mechanical seat supports with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -Approx. 32 mm wooden floor on the gooseneck and the loading area, framed in ALU omega profiles -A locking point on the extension, approx. every 500 mm -10 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards -6 pairs of stake pockets embedded in the outer frame of the loading area, for stakes approx. 100x50 mm -2 stake pocket strips mounted across the loading floor of the loading area, for stakes approx. 100x50 mm -Inox toolbox approx. 1,250 x 500 x 550 mm -Bevel on the vehicle's end crossbar, approx. 350 mm 10° -Integrated hanging strip for loose aluminum docking ramps on the vehicle's end crossbar -1 pair of downpipe supports on the end crossbar -Fenders on all axles -Central lubrication system with 1 pump -Steering can be operated from the front and rear using a cable remote control via push button, with alignment control of the axles -Under the gooseneck and at the back of the end crossbar, a 7-pin socket for warning signs on the left and right -A 7-pin socket on the end crossbar -Container locks "TWIST-LOCKS" in the loading area for transporting 2x 20ft - and 1x 40ft containers -Radio remote control for the steering in addition to the cable remote control, with 2 indicator lights on the receiver as a lane control -2 axle load gauges + axle load diagram -4 warning signs approx. 423 x 423 mm extendable by approx. 400 mm -Standard HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% -

Condition: used, Year of construction: 1999, Payload: 19,990 kg Gross vehicle weight: 8,010 kg Front tire condition: 70% Rear tire condition: 70% Front tires: 245/70 R 17.5 Gbjdpfoutw I Njx Akzsl Rear tires: 245/70 R 17.5 Please contact PFEIFER GROUP for further information.

Condition: good (used), first registration: 11/2010, color: red, Year of construction: 2010, Unladen weight: 16,920 kg Payload: 48,080 kg Gross vehicle weight: 65,000 kg Body brand: NOOTEBOOM OVB-65-04V 48 METERS LONG MATERIAL Extendable body: Yes Technical condition: good Visual condition: good Gbedpfx Akex Sxkrozjl NOOTEBOOM OVB 65-04V LONG MATERIAL SEMI-TRAILER 4 AXLES, HYDRAULICALLY STEERED CENTRAL LUBRICATION AIR SUSPENSION TOTAL TELESCOPIC LENGTH: 48 METERS

Condition: excellent (used), axle configuration: 2 axles, first registration: 11/1993, total length: 136,700 mm, suspension: air, color: blue, Year of construction: 1993, Equipment: crane, VERY WELL-MAINTAINED SEMI-TRAILER 2X STEERING AXLE BELGIAN REGISTRATION DOCUMENT = Further Information = Axle Configuration Axle Brand: BPW Suspension: Air suspension Rear axle 1: Twin tires; Steerable Rear axle 2: Twin tires; Steerable Weights Unladen weight: 11,400 kg Payload: 20,600 kg Gross Vehicle Weight: 32,000 kg Functionality Lifting capacity: 6,000 kg Lifting height: 780 cm Crane: PALFINGER PK14500A, year of manufacture 1992 Gbjdpfx Aksw Am Igozel Condition Technical condition: very good Visual condition: very good Further information Please contact Thierry Leemans for more details.

Condition: used, functionality: fully functional, machine/vehicle number: 2002, empty load weight: 6,200 kg, overall weight: 34,500 kg, axle configuration: 3 axles, first registration: 04/1997, next inspection (TÜV): 05/2025, loading space length: 13,650 mm, loading space width: 2,550 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 1,310 mm, color: grey, Year of construction: 1997, Equipment: ABS, Flatbed semi-trailer with 7 x lashing winches, stake pockets, 16 x lashing rings, first axle liftable, last axle steered, German vehicle from first owner. Sale only to business customers and excluding any warranty. We deliver to any German seaport. Gbjdpjmxgcysfx Akzsl

Condition: new, empty load weight: 6,400 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, total length: 13,550 mm, suspension: air, load capacity: 31,600 kg, Solid Kapur floor 34 Lashing rings LED lights Gbsdpex Hkvpefx Akzel Double-wing door 1st axle liftable Aluminium side panels 800 mm Spare wheel carrier 2 PVC toolboxes SAF axles Disc brakes Length: 13.55 m

Condition: used, empty load weight: 7,000 kg, maximum load weight: 31,500 kg, overall weight: 38,500 kg, first registration: 12/2017, color: black, fuel type: diesel, Tare: 7000kg, Total allowable weight: 38500kg, SEMI-TRAILER PLANE. Gbedpfx Aksq Dgifjzol

Condition: used, first registration: 10/2009, loading space length: 14,000 mm, loading space width: 2,460 mm, loading space height: 2,900 mm, loading space volume: 99 m³, color: white, mileage: 100,000 km, fuel type: diesel, gearing type: mechanical, Cargo area (L W H): 14,000 mm x 2,460 mm x 2,900 mm, Cargo volume: 99 m³, BODY WITH C/T Gbjdpfx Aotqlccokzel

Condition: used, functionality: fully functional, empty load weight: 8,300 kg, maximum load weight: 20,000 kg, axle configuration: 1 axle, first registration: 04/2001, next inspection (TÜV): 01/2025, loading space length: 7,050 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, tire condition: 90 %, ground clearance: 150 mm, color: blue, trailer brake: trailer braked, Year of construction: 2001, ORTHAUS 1 axle lowbed . Steering axle . Lifting loading floor . Gooseneck fix . Loading space 7050 mm . Gbodpexw Uaqofx Akzol Coupling height 1250 mm .

Condition: used, Year of construction: 2013, Please provide reference number upon request: 22822 Specifications: 2013 model Lower level: about 9 meters our level: about 5 meters Air anchor and bellows replaced Brakes replaced Rail vultures in front of prey Turn on the 3rd axle (just kidding) Air on 1st axle Driveways included Stakes not included Gbsdeyxk Hropfx Akzsl Chains on our plane are not included. Tires (see pictures) Ready for delivery   Description: 2013 Broshuis E2190/27 3 axle semi-trailer with drive axles. All air anchors, bellows, support legs, rail clamps (front), air bells have been replaced. The brakes are new. The rear swing is fiddly, the owner says it could be enough to lubricate it. Ready for delivery. Technical approved: Yes EU-approved until: 12.11.2026 Own weight: 1 Model: E2190/27 3 akslet semihenger m/ kjørebruer = More information = Please contact ATS Norway for more information