Used Stas S Semitrailers for sale (124)

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Side tarpaulin retrofit available at an additional cost! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – moving floor * First registration: - (New vehicle) * Colour: Chassis galvanized, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.64 m to 2.82 m high) * Gross weight: 36,000 kg * Unladen weight (as per registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle lift / traction assist / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond alloy wheels * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C floor with remote control and control panel at rear left * 21 floor planks, 10 mm flat * 12 pairs of recessed lashing rings in floor * Welded aluminium end caps * Residual emptying wall with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking rods * Swingable rear door cross member * Hydraulic connections at the front with 3 m hoses and * Additional connection beneath body without hoses * Control platform with steps at front left * Fifth wheel height: 1,150 mm * Single wheel fenders * Full-load support legs * One-piece, foldable aluminium rear light guard * Roll tarpaulin (900g/m²) with tension belts * Foldable steel hoops and longitudinal tension belts * 1x toolbox at rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring * Aluminium rear impact guard * 1x extendable ladder at rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at rear * 1x LED work light on interior front wall * 2 x 3-function lamps on upper rear door cross member New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Psdpfxsv Emk Uj Afhjgg Notice regarding possible inaccuracies in the listing: Although this listing has been carefully prepared, errors or inaccuracies in the information may occur. No liability is accepted for errors, changes, or prior sale. All information is non-binding. Please contact us to verify details or clarify any questions.

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Podpfoxriu Eox Afhogg Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: used, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, Year of construction: 2021, Equipment: ABS, STAS Moving Floor Semi-Trailer 92 m³ Remote Control Lift Axle Overview · First registration: 03.08.2021 · Year of manufacture: 2021 · Mileage: 252,381 km · Colour: Grey · Weight: 7,810 kg · Tyres: 385/65 R 22.5 · Note: Available immediately Special Equipment 10 mm floor, 92 m³, SAF axles, lift axle, Wabco Smartboard, lateral tie-down rings, platform with railing, hydraulic roof net Shur-Co UK, 2x spare wheel holders with 1 spare wheel, tarpaulin flaps, remote control, reversing camera, toolbox, under-chassis hydraulic connections, axle load indicator, 2x 7-pin + 1x 15-pin E-connection, 2x brooms, aluminium ladder, 2 reversing spotlights, ADR plate, MOT valid until 08/2026. Standard Equipment 3-axle, disc brakes, tarpaulin crank, 2 longitudinal straps, 4 steel rails, pneumatic door lock, shovel holder with shovel, ABS, EBS, lift and lower valve, portal doors with 3 locks, rear light cover, 2 chocks. Errors, typographical mistakes, and prior sale reserved. The seller reserves the right to withdraw from the sale. _____ Internal reference number for inquiries: TR25264 _____ STARENT Truck & Trailer GmbH, Bruck 49, A - 4722 Peuerbach Sales contacts: Mr. Ing. Christoph Wimmer (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Yours too. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles, such as tractors, trailers, trucks, and vans. Mr. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Pgjdpfoxd Ncgsx Afhjg Mr. Michael Leirich (German, English) p: WhatsApp t: -125 @:

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2019, * Lift axle * Alloy wheels * JOST axles * Sliding tarpaulin * Unladen weight: 7,760 kg ----- Internal vehicle number: 10296 ---- Subject to errors and prior sale WhatsApp support available! Pgjdow Rit Topfx Afhog If you have any questions about the vehicle or would like further information, feel free to contact us conveniently via WhatsApp WhatsApp WhatsApp

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2001, total length: 10,860 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 6,750 mm, color: blue, Year of construction: 2001, Equipment: ABS, = Additional Options and Accessories = - Leaf spring suspension - Air suspension - Toolbox = Remarks = STAS SA339K | Tipper | BPW axles | 2001 | Drum brakes | Toolbox | Belgian semi-trailer Chassis number: YE6SA339K100N0878 EXPORT: Road transport: Austrian transit plates with 21-day insurance + €550 Sea transport: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about Geerts Trucks & Trailers: YouTube Channel: Geerts Trucks & Trailers Instagram: Geerts Trucks & Trailers Psdpfxox Tt N Sj Afhsgg Facebook: Geerts Trucks & Trailers TikTok: Geerts Trucks & Trailers LinkedIn: Geerts Trucks & Trailers Follow us and subscribe to our channel for our latest vehicles! No rights can be derived from incorrect information in this advertisement. Geerts Trucks & Trailers always strives to provide accurate details. = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle brand: HANKOOK Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 50%; Brakes: Drum brakes Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 50%; Brakes: Disc brakes Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 50%; Brakes: Drum brakes Weights Curb weight: 7,115 kg Payload: 31,885 kg Gross vehicle weight: 39,000 kg Functional Tipper: Rear Condition Technical state: Very good Visual state: Very good Further information Contact Olivier Geerts or Edwin Geerts for more information.

Condition: used, maximum load weight: 33,370 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2014, loading space length: 8,500 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,160 mm, Equipment: ABS, Stas S300CX Insulated Asphalt Tipper First Registration MB axles with disc brakes, ABS and EBS Air suspension Smartboard Serial number: YE6S300CXD0001049 Tyres: 385/65 R22.5 35% Gross weight: 39,000 kg, unladen weight: 5,630 kg, payload: 33,370 kg Work platform Roller tarpaulin 3 x grain chutes Pgjdpfx Afsx Txmiehsg Foldable underrun protection Box: L-8.50 m, W-2.35 m, H-1.50 m = 30 m³ Built for ADR approval Errors, typographical mistakes, and prior sale excepted.

Condition: used, axle configuration: 3 axles, first registration: 05/2017, loading space length: 13,240 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, total length: 14,000 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, color: other, Year of construction: 2017, = Additional options and accessories = - Capacity of the superstructure: 92 m3 (The total capacity of the superstructure.) - Door opening height: 271 - Door opening width: 247 - Floor Material - Material: aluminum - Rear door type: double_doors Pgedpsx Np Ucjfx Afhog - Sliding wall - Superstructure construction year: 2017 - Tarpaulin - Winch = More information = Tyre size: 385/65R22.5 Make axles: SAF 9 Ton Intradisc Brakes: disc brakes Suspension: air suspension Axle 1: Alloy wheels; Lift axle; Tyre profile left: 20%; Tyre profile right: 40% Axle 2: Alloy wheels; Tyre profile left: 20%; Tyre profile right: 20% Axle 3: Alloy wheels; Lift axle; Tyre profile left: 40%; Tyre profile right: 40% GVW: 42.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • BAS World support and services Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, axle configuration: 3 axles, first registration: 09/2019, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,160 mm, color: grey, Year of construction: 2019, Axle configuration Tyre size: 385/65R22.5 Axle brand: JOST Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Pgedpfjx Trmijx Afheg Weights Unladen weight: 7,440 kg Payload: 34,560 kg Gross vehicle weight (GVW): 42,000 kg Maintenance APK (Technical inspection): Valid until 09/2026 Identification Registration number: OR-26-YP Further information Please contact Bob Beukers for more information.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm Basalt Grey Chassis Type: Moving Floor Kingpin Load (National, t): 12 Axle Load (National, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Gross Vehicle Weight (technically permitted): 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Moving Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Chassis Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Offset (ET): 120 Option 1st Axle with Traction Aid Traction aid optimised with activation via push button in the truck (installation of button not included in scope of delivery) and by pressing the brake pedal three times Option 3rd Axle: Without Podpfx Asxdqbkefhegg Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with raise/lower valve Lowering of air suspension via Smartboard, as well as raise/lower valve Coupling Head Pneumatic: European palm coupling Wheels: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection Operation: Fixed underrun bar Lighting Manufacturer: Aspöck Lighting Type: EUROPOINT III – LED 2 pcs. LED reversing lights, rear, installed left and right on lamp bracket Work Lights (operated via switch): 2 pcs. LED reversing lights, front, left and right in direction of travel, mounted in the area of the landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling – Position: Connection point at front wall (additionally with connection possibility at landing legs) Hydraulics positioning: pressure back, pressure left, return right (CON) Air connection in the toolbox Aluminum access ladder 3.80 m – right-hand side in direction of travel Broom and shovel holder, three holders each, mounted on chassis, left-hand side in direction of travel Moving Floor System: Brand Cargo Floor Air/electric console centrally mounted in direction of travel, with support bracket Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-panel: Folding on the rear wall, mounted right in driving direction Cover plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Floor system operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor closure plate: Stainless steel With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for moving floor system Residue-free discharge wall Rear wall: Aluminum Swing door version: split 1/2 to 1/2, with transverse door header Door wing opening: right door wing opens first (STAS manufacturer’s choice) Transverse door header: swivel version Door header material: Aluminum Rear door locking: 1x swivel bar per door half

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. Pedpfx Asxplxzefhjgg CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,250 mm, Equipment: ABS, bioSTAR 90.6 cbm Deep Black EU conformity Chassis type: moving floor National kingpin load (t): 12 National axle load (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Chassis series: 135 Design-based technical max. gross weight (t): 39 Wheelbase (moving floor semi-trailer, mm): 7850 Internal height front (mm) (IHF): 2641 Internal height rear (mm) (IHB): 2778 Loading length (mm): 13513 Volume (m³): 90.6 Total width (mm): 2550 Total length (mm): 14000 Chassis Chassis material: steel Tyre size: 385/65R22.5 Chassis neck height (mm): 217 Axles: JOST Brake version: disc brake Brake type: JOST - DCA-T7 Offset (ET): 120 1st axle with lift axle and starting aid (option) 3rd axle with lift axle (option) Tyre pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lowering valve Lowering of air suspension via Smartboard, as well as lift/lowering valve Wheels: Alcoa Dura Bright Landing legs: steel gear-type landing legs mounted at the front of the chassis, JOST MODUL type, single-side operation, 2 speed levels Control console: EBS operation on the left in driving direction, behind the axles Lighting manufacturer: Aspöck Lighting type: LED version (2 x 2 round) Hydraulic coupling: rotary coupling Smartboard Air connection mounted in the toolbox Aluminium access ladder 3.80 m - right-hand side in driving direction Loading pressure gauge Ø 63 mm - mounted on the side of the control panel Moving floor system brand: Cargo Floor Air and electrical console mounted centrally in driving direction with gantry Lighting protection: one-piece protective fender Superstructure Front wall inclination (°): 90 Rear wall inclination (°): 90 Rear door type: wing doors Cover plate between floor and front wall: fixed aluminium plate and PVC strips Standard fifth wheel plate (15T) Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Operation of floor system: radio remote control Cargofloor control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 10 mm flat Moving floor closure plate: stainless steel Oil temperature sensor for moving floor system Residue emptying wall Type of residue emptying wall: aluminium Residue emptying wall: brush Residue emptying wall storage: 6 wheels with bidirectional cleaning (cargo floor) Rear wall: aluminium Design of wing door division: 1/2 to 1/2, with door end crossbar Opening of door wings: right-hand door wing opens first (manufacturer choice: STAS) End crossbar of doors: swing type Material end crossbar: aluminium Rear door locking: 1x rotary bar per door leaf Number of door handles - left door leaf: 2 per rotary bar Number of door handles - right door leaf: 1 per rotary bar Securing open door wings: spring holder with plastic protection Rear wall sealing: standard rubber seal Additional lock rear wall: single-acting pneumatic Pedpfjxhanzjx Afhsgg Operation of additional lock: manual via operator control on the side of the control panel Impact protection rear doors: aluminium ram buffer across the entire width of the rear wall Spriegel type: flat round aluminium tube Number and position of spriegels: 3 central spriegels (evenly distributed, centre) and 1 rear spriegel (rear) Curtain holders: multifunctional (rotatable and foldable) 4 pcs Curtain holder positions: right side wall Distance from lower corner profile to upper side wall: au (incomplete)

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Pedpfxjupqi Ej Afhegg Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: used, maximum load weight: 30,090 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 47 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, agroSTAR 47.6 m³ Chassis type: V-Chassis National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1175 Chassis width (mm) 1400 Loading width (mm) 2475 Standard chassis: 080 Technical permissible total weight 39=12 9 9 9 Front interior height (mm) (IHF) 2165 Rear interior height (mm) (IHB) 2165 Volume (m³) 47.6 Overall width (mm) 2550 Wheelbase (mm) (WB) 5800 Overall length (mm) 10259.9978 Chassis Chassis material: Aluminum Tire dimensions 385/65R22.5 Loading length (mm) 8880 Axle manufacturer JOST (STAS manufacturer selection) Brake type JOST - DCA-T7 Offset (ET) 120 Optional 1st axle with lifting axle and traction aid Activation of traction aid via button in the truck Optional 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle, controlled via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, manually lockable via Smartboard and switch on the chassis Wheels Alcoa Dura Bright Tires type Regional spacing Wheel nut caps Chrome with STAS logo Landing gears Weweler: Steel geared landing gears, type Weweler, with leveling feet, single-sided operation, and 2 Speed levels Manual underride guard operation Towing eye: 1 piece, left in the direction of travel Black underride guard mud flaps with STAS logo, mounted across the entire width of the underride guard Fixed underride guard mud flap attachment Underride guard cover with covers Handle on the underride guard EBS control panel: Left in the direction of travel, in front of the axles Toolbox Position of toolbox: Right in the direction of travel, in front of the axles Material of toolbox - right in front of the axles: Plastic Dimensions of toolbox - right in front of the axles: 860x520x500 Type of fender: Domar STAS with white line Number of mud flaps on the fender: 2 pieces Type of mud flaps: Asphalt Manufacturer: Aspöck Type of lighting: EUROPOINT III - LED Work lights (operated via switch): 2 pieces LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp holder Work lights (operated via switch): 2 pieces LED reversing lights at the front, left and right in the direction of travel Tipping cylinder manufacturer: Hyva Tipping cylinder type: Hydraulic cylinder with small casing Cylinder tilt angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 6480 Tipping cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Type: Smartboard: Standard Air connection: Left in the direction of travel, on the lamp holder Aluminum leaning ladder, 3 m - right in the direction of travel Leaning ladder attachment for rear entry with hooks Broom and shovel holders with 3 holders each, mounted on the chassis on the left in the direction of travel Two plastic wheel chocks including brackets Chassis safety device - body: Rubber plugs (not for FSS 74 and 86) Air and electrical console, right in the direction of travel assembled Construction End wall inclination (°) 20 Rear wall inclination (°) 90 Rear wall type combi-door A-plate on trough (not foldable) - right side Podpfstb Tqpex Afhsgg Incline of the bottom chord profile inside (°) 45 Floor 8 mm ALU - 110 Brinell Rubber pads attached below

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Pedpfx Aouar Amsfhogg Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: used, empty load weight: 11,245 kg, overall weight: 36,000 kg, Year of construction: 2009, Equipment: ABS, STAS/ALU/TIPPER Year of construction: 10/2009 2 axles Total weight: 36000 kg Pjdpfovdrt Sex Afhjgg Empty weight: 11245 kg ABS

Condition: used, maximum load weight: 31,800 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 01/2015, next inspection (TÜV): 02/2026, loading space volume: 92 m³, Year of construction: 2015, Equipment: ABS,

Condition: used, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 01/2025, total width: 14,000 mm, total height: 2,550 mm, Year of construction: 2015, Equipment: ABS, Year of manufacture: 2015 Technical inspection valid until: 29.01.2025 Payload: 31,510 kg Gross weight: 39,000 kg Documents: Technical certificate (vehicle registration document) Equipment: SAF axles | front tires 10%, middle tires 10%, rear tires 10% | air suspension | disc brakes | rear doors Safety: ABS Pedpfx Afsyd U Nmjhegg * EBS

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Equipment: ABS, Stock no. 5640 Purchase, lease, or lease with a purchase option by arrangement! Approximately 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR - Agricultural Moving Floor * First Registration: - (New vehicle) * Colour: Chassis RAL 9005, Superstructure RAL 7001, Tarp SIO 7500 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift and traction assistance / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25m * Suspension: Air suspension with raise/lower functionality * Gross Weight: 36,000 kg * Unladen weight (manufacturer): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control panel rear left * 21-plank floor system, 6mm ribbed * Aluminium end caps, welded * Rear closure plate made of aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue emptying wall with brushes and stainless steel handles * Bulkhead made from aluminium plank profiles * Service door in the bulkhead * Smooth side walls inside and outside (grain specification), fully welded * Inspection window in the left rear side wall * Swing doors (50/50 split) * 4x locking rods * Swivelling crossbar at door closure * Hydraulic connections at the front with 3m hoses and * Connection option below the superstructure (without hoses) * Pressure 1" female * Return 1" female * Operator platform with access front left and right * Fifth wheel height 1,150mm * Individual mudguards * Full load supports * Rolling tarp (900g/m²) with quick-clamp system * Aluminium roof bows, foldable * Foldable rear aluminium light guard * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel & broom holder left * 1x 2x8-step aluminium access ladder fixed right * 1x extendable ladder at the rear right * Smartboard * TPMS tyre pressure monitoring * LED rear lights – 5-chamber * 2x LED work lights in front of the axles Pgjdpfjxl Ntuox Afhog * 2x LED reversing lights at the rear * 1x LED work light inside the bulkhead * 2 x 3-function lamps at the top of the door crossbar Purchase, lease, or lease with a purchase option by arrangement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, occasional errors may occur in the text or information provided. We assume no liability for mistakes, changes, or prior sale. All information is subject to change and not guaranteed. Please contact us to verify details or if you have any questions.

Condition: used, axle configuration: 3 axles, first registration: 12/2022, next inspection (TÜV): 04/2026, loading space volume: 50 m³, Equipment: ABS, STAS Agrostar 50m³ - Combination doors Pgedpfex Skrzex Afhog - Two lift axles - Alcoa Dura Bright aluminium rims - JOST axles - Grain sack - 6x LED work lights - Hardly used, 5,500 km - Smart Board Rental possible! All information provided without guarantee! Calls preferred!

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2023, Year of construction: 2023, Equipment: ABS, Visit our website where you will find our complete vehicle stock with many more photos and detailed information available in several languages. SEL 8345 STAS S300ZX 2 liftable axles German registration / 1st owner First registration: 06.02.2023 Year of manufacture: 2023 Gross vehicle weight rating (kg): 42,000 Permissible total weight (kg): 42,000 Unladen weight (kg): 7,990 VIN: YE6S300ZXN0008 Technical inspection valid until: 02.2026 TIRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 axles Jost 1st and 3rd axle liftable Air suspension Disc brakes BODY: Internal dimensions: Height (m): 2.83 (2.71) Psdpjx Sbidofx Afhjgg Width (m): 2.48 Length (m): 13.50 ADDITIONAL SPECIFICATIONS: Swing doors VEHICLE DOCUMENTS: Registration certificate part 1 Registration certificate part 2 COC (Certificate of Conformity) M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information provided, we assume no liability for errors or omissions. We kindly ask our customers to consult the available photos. The measurements specified are approximate values. Our vehicles are sold in the condition they are in. We invite customers to visit our company to inspect the vehicle in person. We also offer the opportunity for a test drive. Please note that the vehicle is supplied with the currently installed batteries; if customers require new batteries, we are happy to provide pricing information.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2023, Year of construction: 2023, Equipment: ABS, Visit our website to view our complete stock of vehicles, including many more photos and information available in multiple languages. SEL 8344 STAS S300ZX 2 liftable axles German registration / 1st owner First registration: 06.02.2023 Year of manufacture: 2023 Technical gross weight (kg): 42,000 Permissible total weight (kg): 42,000 Unladen weight (kg): 7,990 VIN: YE6S300ZXN0001770 Psdpox Sbh Tsfx Afhegg TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 axles, Jost 1st and 3rd axles liftable Air suspension Disc brakes BODY: Internal dimensions: Height (m): 2.69 Width (m): 2.48 Length (m): 13.50 OTHER SPECIFICATIONS: Portal doors VEHICLE DOCUMENTS: Registration certificate part I (Fahrzeugschein) Registration certificate part II (Fahrzeugbrief) COC (Certificate of Conformity) M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian, Russian) Languages spoken: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information provided, we do not accept liability for any errors or omissions. Please refer to the available photos for reference. All measurements listed are approximate values. Our vehicles are sold in their current condition. We invite customers to visit our premises to inspect the vehicles in person. Test drives are also available. Please note that the batteries supplied with the vehicle are the ones currently fitted. If you require new batteries, please contact us for pricing information.

Condition: used, machine/vehicle number: YE6S300ZXH0000870, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = Pjdevg Indspfx Afhsgg - Electronic Braking System (EBS) = Further information = CE marking: yes

Condition: used, axle configuration: 3 axles, first registration: 09/2014, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2014, Tire size: 385/65 R22.5 Suspension: Air suspension Pgedpfx Asx Rlyqofheg Rear axle 1: Left tire profile: 8 mm; Right tire profile: 3 mm Rear axle 2: Left tire profile: 8 mm; Right tire profile: 7 mm; Brakes: Disc brakes Rear axle 3: Left tire profile: 6 mm; Right tire profile: 3 mm; Brakes: Disc brakes Curb weight: 6,360 kg Payload: 32,640 kg GVW: 39,000 kg Damage: None

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, stas 92m3 semi-trailer, 21-slatted moving floor ideal for waste with hydraulic adjustable sealed tailgate and closed roof for 2\3 , 3 disc axles with 3rd steerer, walkway in header, year 2005, overhauled until 31.10.2020-CONCESSIONARY INTERDRIVE SRL-PARMA Pedpfxeh I Id Ne Afhjgg

Condition: good (used), axle configuration: 3 axles, first registration: 05/2011, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 2,150 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 7,340 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2011, Side wall material: Aluminum, Number of sides: 1, Axle type: MERCEDES-BENZ, 55M3 ALU, COIL = Further information = General information Cab type: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 14 mm; Tyre tread right: 9 mm Axle 3: Tyre tread left: 10 mm; Tyre tread right: 7 mm Weights Unladen weight: 7,340 kg Payload: 31,660 kg Gross vehicle weight: 39,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damages: none = Company information = Pgjdpfow S Dfmjx Afhjg Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive prices • Reliable business conduct • We speak many languages • We understand our customers • Assistance with import and transportation • (Export) license plates arranged quickly • Professional technical services • The safety of "recognizable quality" • And more.... Please visit our website for special offers and our full inventory. Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.