Used Stas S Semitrailers for sale (127)

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE Klodeu Dvw Sepfx Afhjl +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Kodpfx Afefi Nmwohjll Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: STRONG & LIGHT, now also available for heavy-duty use, from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty use, from 40m³ loading volume and 6,600kg ----Example: high-quality aluminum chassis with high-strength steel trough, REAL 7,160 KG, Chassis with 3x9t axles DCA, with 430mm disc brake, 6x steel rims, 1st axle as lift axle with starting aid, aluminum drop-lift supports (can be uncoupled when loaded), foldable underrun protection, digital loading pressure gauge as axle load indication, tool box, lean-to ladder, Trough made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, wing doors 1/2 - 1/2 with a grain slider on the right, subsequent unlocking of the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), roll-up tarpaulin with a pipe in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long cover, loading edge = 3,650mm, (some of the vehicles shown contain special equipment) ----Other equipment points and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Paintwork and equipment according to customer requirements Ksdpfx Ajhfiqcefhjll +500¤ transfer costs ?Offers and images are subject to change ?

Condition: used, maximum load weight: 28,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2019, next inspection (TÜV): 11/2025, loading space volume: 92 m³, Year of construction: 2019, Equipment: ABS, * Stas 3-axle walking floor S300ZX * 10mm floor * Approx. 92m³ * Radio remote control * Roll-over tarpaulin * Air suspension * 2x lift axles * Disc brakes * JOST axles Ksdpjw H Hprjfx Afhjll * EBS * ABS

Condition: used, maximum load weight: 33,110 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space volume: 46 m³, Equipment: ABS, Stas 3-axle grain tipping trough, volume approx. 46m³, portal doors with 2x grain pushers, roll tarpaulin, platform, air suspension, lift axle, disc brakes, BPW axles, aluminum rims, Wabco SmartBoard, EBS, ABS Klodpfxsw Er Rrj Afhel

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2012, next inspection (TÜV): 09/2025, loading space volume: 55 m³, Year of construction: 2012, Equipment: ABS, * Stas 3-axle grain tipper * Type S300CX * Volume approx. 55m³ * Doors * Grain pusher * Air suspension * Lift axle * Mercedes axles * Disc brakes * Alloy wheels * Wabco SmartBoard * Roll-up tarpaulin Klodpjwciu Aefx Afhsl * Platform * EBS * ABS

Condition: used, maximum load weight: 32,740 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2008, Year of construction: 2008, Equipment: ABS, * Stas S 339 CX * Year of construction : 2008 * 3 axles * Air suspension * Tarpaulin * 2 x nozzles Ksdpet Hhx Sjfx Afhjll * Tare weight : 4.890 Kg * : 39.000 Kg Internal number : 24A016

Condition: used, maximum load weight: 32,740 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2001, Year of construction: 2001, Equipment: ABS, * Stas S3 SA334K * Year of construction : 2001 * 3 axles * Air suspension Klodpfjt Hirmex Afhol * Tarpaulin * 2 x nozzles * Tare weight : 5.260 Kg * : 39.000 Kg Internal number : 24A004

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2000, Year of construction: 2000, Stas S 3-SA334 K Kjdpswt Ia Eefx Afhsll Year of manufacture: 2000 : 34,000 kg Air suspension 3 axles Aluminum tipper Internal number: 25A032

Condition: used, maximum load weight: 32,740 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2000, Year of construction: 2000, Equipment: ABS, * Stas S 3SA 334K * Year of manufacture: 2000 * 3 axles * Air suspension * Tarpaulin * 2 x supports * Own weight: 5,260 kg Kledpfx Afjt Hirtehol * : 38,000 kg Internal number: 23A040

Condition: used, maximum load weight: 33,650 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 11/2024, loading space volume: 90 m³, Year of construction: 2015, * Stas S 300 ZX C1A L21 DA * Year of construction : 07/2015 * 3 axles * Air suspension * Walkingfloor * Tarpaulin * Unladen weight : 8,350 kg * 42,000 kg * Tüv until 11/24 Internal number : 24A044 Klsdpfx Afsu Rkq Hehjl

Condition: used, maximum load weight: 32,740 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2000, loading space volume: 17 m³, Year of construction: 2000, Equipment: ABS, * Stas S 3SA 334K * Year of manufacture: 2000 Klodot Hhtvepfx Afhsl * 3 axles * Air suspension * Tarpaulin * 2 x supports * Own weight: 5,260 kg * : 38,000 kg Internal number: 23A040

Condition: new, maximum load weight: 28,020 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, Year of construction: 2024, Equipment: ABS, National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Ksdjwbxxhepfx Afholl Front internal height (mm) 2641 Rear internal height (mm) 2821 Overall width (mm) 2550 Overall length (mm) 14000 Steel chassis 385/65R22.5 SAF axles Brake type: SAF - SBS 2220 (Haldex) Offset (ET) 120 Option: 1st axle with traction help Activation of traction help via button in the truck (installation of button is not included in the scope of delivery) and by pressing the brake pedal three times Brake pad wear indicator not connected Tire pressure monitoring: Wabco Trailerpulse Lowering of the air suspension via Smartboard and lifting/lowering valve Pneumatic coupling head: European Palm coupling Steel rims Landing gears: Steel geared landing gears mounted at the front of the chassis, type JOST MODUL, with one-sided operation and 2 speed settings EBS control panel: Left side, behind the axles Moving floor control panel: Left side, behind the axles Toolbox: Left side, behind the axles Lighting: Aspöck Lighting type: ECOLED II Reversing lights: 2 LED reversing lights, rear, left and right, on lamp holders 2 LED reversing lights, front, left and right, on lamp holders Hydraulic coupling: Swivel coupling Hydraulic coupling - Size 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose 3,000 mm Hydraulic coupling - Position: Connection option on the front wall (additionally on the support legs) Standard Smartboard Aluminum lean-to ladder 3.80 m - right in the direction of travel Position of broom and shovel holder on the side impact protection on the left Loading pressure gauge Ø 100 mm - at the front of the chassis With two plastic wheel chocks including bracket Walking floor system: Cargo Floor Air and electrical console, centered in the direction of travel Construction Rear wall: wing doors Cover plate between floor and front wall: solid aluminum plate and PVC strips Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles: 600 mm wide - 30 mm thick Distance from lower corner profile to upper side wall on the rear: 2649 Floor system operation: radio remote control Cargofloor Control: Type CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 10 mm ribbed Aluminum moving floor end plate With additional plastic guides below the floor profiles Type of Aluminum Complete Emptying Wall Brushes for Complete Emptying Wall Stainless steel handles for easy wall movement Storage for Complete Emptying Wall: 6 wheels with bidirectional cleaning (loading floor) Aluminum Rear Wall Hinged door design: 1/2 to 1/2 split, with door crossbar Door leaf opening: Right door leaf opens first Pivoting door crossbar Door crossbar material: Aluminum Rear door locking: 1x pivoting rod per door half Number of door handles - left door leaf: 2, right door leaf: 1 per pivoting rod Opened door leaf fastening: Spring retainer with plastic protection Rear wall seal with standard rubber seal Rear wall additional locking: Pneumatic, single-acting Additional locking: Manual operation of the additional locking via the side of the dashboard Rear door crash protection: Aluminum ramp buffer across the entire width of the rear wall Tensioning gear for roll-up tarpaulin tensioning With handle, mounted on the underside/side wall of the body Sprieg type

Condition: new, maximum load weight: 28,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, Year of construction: 2025, Equipment: ABS, Last kingpin load national (t) 12 Axle load national (t) 8 Axle spacing (mm) 1310-1310 Saddle height (mm) 1150 Chassis width (mm) 1200 Internal height front (mm) 2641 Internal height rear (mm) 2778 Overall width (mm) 2550 Overall length (mm) 14000 Chassis steel Axles JOST Brake type JOST - DCA-T7 Offset (ET) 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck Option: 3rd axle with lift axle Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with lift and lower valve Lowering of air suspension via smartboard, as well as lift and lower valve Coupling head pneumatic European palm coupling Rims steel Landing gears Weweler as steel gearbox landing gears, type Weweler, with compensating feet, single-side operation, and 2 speed stages Operation underrun protection fixed Splash flap underrun guard across the full width of the underrun protection EBS operation on the left in the direction of travel, behind the axles Control console moving floor on the left in the direction of travel, behind the axles Toolbox on the left in the direction of travel, behind the axles Lighting manufacturer Aspöck Lighting ECOLED II 2 pcs LED reverse lights, rear left and right in direction of travel on lamp carrier Position work lights (operated via switch): 2 pcs LED reverse lights front left and right Hydraulic coupling rotary coupling Hydraulic coupling - size 3/4" Hydraulic coupling - gender female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position connection possibility at the front wall (additionally with connection possibility at the landing legs) Standard smartboard Air connection on the side of the control panel Aluminium access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on left side underrun protection Two plastic wheel chocks incl. holder Moving floor system brand Cargo Floor Air and electrical console centrally in direction of travel Body Rear wall type swing doors A-frame foldable on the door, right Cover plate between floor and front wall, fixed aluminium plate and PVC strip Front wall profile 3 mm - 2 mm Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates rectangular 1500 x 1000 x 4mm Distance lower corner profile to upper side wall rear 2649 Operation floor system radio remote control Cargofloor control type CF 500 SL-C - E-CONTROL Floor profiles 21 Type floor profile 8 mm flat Moving floor end plate stainless steel With additional plastic guides underneath the floor profiles Kljdpevy Rc Dsfx Afhol End cap reinforcement stainless steel shoes over the end caps of the floor profiles, with aluminium wear plate above the end caps Oil temperature sensor moving floor system Discharge wall Type discharge wall aluminium Storage discharge wall 6 wheels with bidirectional cleaning (cargo floor) Rear wall aluminium Design swing door split 1/2 to 1/2, with door closing crossbeam Opening of the door leaf: right door leaf opens first Door closing crossbeam in pivotable design Material door closing crossbeam aluminium Locking rear doors 1x rotary bar / per door half Door leaf left 2 pcs door handles per rotary bar Door leaf right 1 pc door handle per rotary bar Fastening of opened door leaves spring retainers with plastic protection Rear wall sealing with standard rubber seal Additional rear wall lock pneumatically single-acting Operation of additional lock

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space volume: 90 m³, Equipment: ABS, National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Standard chassis 135 Technical permissible total weight 39=12 9 9 9 Walking floor trailer wheelbase (mm) 7850 Front interior height (mm) (IHF) 2641 Rear interior height (mm) (IHB) 2778 Overall width (mm) 2550 Overall length (mm) 14000 Chassis material: Steel Tire size 385/65R22.5 Chassis neck height (mm) 217 Axles: JOST Type JOST Brake - DCA-T7 Optional 1st axle with lifting axle and traction control Activation of traction control Optional 3rd axle with lifting axle Brake pad wear indicator Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Lowering of the air suspension via smartboard and raising and lowering valve Pneumatic coupling head Weweler landing gear: steel geared landing gear, type Weweler, with leveling feet, single-sided operation, and 2 speed settings EBS control panel: left in the direction of travel Moving floor control panel: left in the direction of travel Plastic toolbox Klodpfswcih Ajx Afhol Aspöck lighting ECOLED II lighting type 2 LED reversing lights, rear, left and right in the direction of travel, on the lamp holder Position of work lights (operated via switch) 2 LED reversing lights, front, left and right Hydraulic coupling, swivel coupling, 3000 mm hose Hydraulic coupling - size 3/4 Hydraulic coupling - gender, female Hydraulic coupling, return swivel coupling Hydraulic coupling return - size 1 Hydraulic coupling return - gender, female Hydraulic coupling - position: connection option on the bulkhead Hydraulic coupling - design: standard version Positioning the hydraulics: pressure return, pressure left, return right Smartboard Air connection on the side of the dashboard Aluminum lean-to ladder, 3.80 m - right in the direction of travel Positioning of the broom and shovel holder on the side impact protection: left in the direction of travel Walking floor system: Cargo Floor Air and electrical console, centered in the direction of travel, with boom Rear wall: hinged doors Folding A-shield Cover plate between floor and bulkhead: solid aluminum plate and PVC strips Standard fifth wheel plate Built-in bulkhead profile: 3 mm - 2 mm Sidewall profile 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Distance from lower corner profile to upper sidewall on the rear: 2649 Floor system operation: Radio remote control Cargofloor Control Type CF 500 SL-C - E-CONTROL Number of floor profiles: 21.8 mm Stainless steel moving floor end plate With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes above the floor profile end caps, with aluminum wear plates above the end caps Oil temperature sensor for moving floor system Aluminum complete emptying wall Storage for complete emptying wall: 6 wheels with bidirectional cleaning Aluminum rear wall Hinged door design: 1/2 to 1/2 pitch, with door end cross member Rear door locking mechanism: 1x rotary bar per door half Rear wall seal with standard rubber seal Rear wall additional locking mechanism: pneumatic, single-acting Additional locking mechanism: manual operation via the control panel on the side of the dashboard Rear door crash protection: aluminum crash buffer across the entire width of the rear wall Tensioning gear for roll-up tarpaulin tensioning: tensioning gear with handl

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, Year of construction: 2024, Equipment: ABS, Kingpin load (t) 12 Axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Wheelbase (mm) 7850 Internal height front (mm) 2641 Internal height rear (mm) 2821 Overall width (mm) 2550 Overall length (mm) 14000 Chassis: Steel Tires 385/65R22.5 Chassis neck height (mm) 217 Axle version: Intra Brake type: SAF - SBS 2220 Option: 1st axle with traction aid Optimized traction aid Tire pressure monitoring Air suspension: Raise and lower valve Lowering of the air suspension via smartboard, as well as Lowering valve Pneumatic coupling head: European Palm coupling Steel rims Landing gears: Steel geared landing gears at the front, type JOST MODUL, with one-sided operation and 2 speed settings Fixed underrun protection control Black mud flaps for underrun protection with STAS logo, across the entire width of the underrun protection EBS control panel: Left side, behind the axles Moving floor control panel: Left side, behind the axles Plastic toolbox Lighting type: ECOLED II Reversing lights: 2 LED reversing lights, rear left and right Work lights: 2 LED reversing lights, front left and right, in the area of the landing gear Hydraulic coupling: Female swivel coupling, 3000 mm hose Hydraulic coupling - Position: Connection option on the front wall Smartboard Aluminum lean-to ladder 3.80 m Position Broom and shovel holder on the side impact protection, left in the direction of travel. Loading pressure gauge Ø 100 mm - at the front of the chassis. With two plastic wheel chocks including bracket. Cargo Floor moving floor system. Air and electrical console, centered in the direction of travel, with boom. One-piece protective plate for the lighting unit. Construction Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type: wing doors. Cover plate between floor and front wall: solid aluminum plate and PVC strips. Standard fifth wheel plate. Front wall profile: 3 mm - 2 mm. Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick. Distance between lower corner profile and upper side wall on the rear: 2649. Floor system operation: radio remote control. Cargofloor Control type CF 500 SL-C. E-CONTROL Number of floor profiles: 21 Kedpfxsqaaf Ro Afhell Floor profile type: 10 mm ribbed Aluminum sliding floor end plate With additional plastic guides below the floor profiles Aluminum complete emptying wall Brushes for complete emptying wall Stainless steel handle for complete emptying wall for easy wall movement Storage for complete emptying wall: 6 wheels with bidirectional cleaning (loading floor) Aluminum rear wall Hinged door design: 1/2 to 1/2 split, with door cross member Door leaf opening: Right door leaf opens first Pivoting door cross member Rear door locking: 1x espagnolette per door half Rear wall seal: Standard rubber seal Rear wall additional locking: Pneumatic, single-acting Additional locking: Manual operation of the additional locking system via the side of the dashboard Rear door crash protection: Aluminum bumper Tensioning gear for Roll-up tarpaulin tensioning mechanism with handle, mounted on the underside/side wall of the body. Type: Steel bow, straight, foldable. Number and position of bows: 2 center bows (centered, evenly spaced) and 1 rear bow (rear). Straight tarpaulin holders.

Condition: used, maximum load weight: 35,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space length: 10,485 mm, loading space width: 2,474 mm, loading space height: 1,895 mm, loading space volume: 49 m³, Equipment: ABS, STAS S300CX 49 m³ In operation since 5/2021 Lifting axle ADR: EXII, FL, OX, AT Loading area: 10,485 x 2,474 x 1,895 mm Wheelbase 1,410 mm Axles 9 tonnes SAF axles Combination door Tarpaulin Disc brakes Tyres 385/65 R22.5 Condition: 1st axle 10 mm 2nd axle 11 mm 3rd axle 12 mm Klsdjw I Ivzjpfx Afhel Spare wheel Operating weight 6,420 kg Gross weight 42,000 kg NEARLY NEW? ONLY USED FOR AGRICULTURAL PRODUCTS! More at: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALE OF TRUCKS AND CONSTRUCTION MACHINERY TRUCK SERVICE TYRE SERVICE TRUCK WASH TACHOGRAPH INSPECTION

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2005, loading space length: 8,100 mm, loading space width: 2,350 mm, loading space height: 1,300 mm, loading space volume: 27 m³, Equipment: ABS, STAS aluminium tipper approx. 27 m³ Kjdpfsx Uf H Esx Afhjll * Air suspension * ROR axles * Disc brakes * Swing tailgate * Gross weight: 38,000 kg * Unladen weight: 5,890 kg * Rolling tarpaulin Tyres: 385/65R22.5 - NET EXPORT PRICE €8,600.00. For an additional charge, we handle all customs and registration formalities. Delivery to the port available at extra cost. Subject to errors and prior sale. CHRISTOF: German / Russian / Polish / Czech / Slovak / English ADRIAN: German / Romanian / French / Spanish / Italian

Condition: used, axle configuration: 3 axles, first registration: 06/2006, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2006, Axle configuration Tyre size: 385/65 R22.5 Axle brand: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Tyre tread left: 10 mm; Tyre tread right: 5 mm Rear axle 2: Tyre tread left: 10 mm; Tyre tread right: 5 mm Rear axle 3: Tyre tread left: 12 mm; Tyre tread right: 10 mm Kledpex Rlk Njfx Afhsl Weights Unladen weight: 6,110 kg Payload: 32,890 kg Gross vehicle weight (GVW): 39,000 kg Condition Damages: none

Condition: used, axle configuration: 3 axles, first registration: 04/1996, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 1996, Axle Configuration Tire Size: 385/65 R22.5 Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Axle Brand: BPW; Right Tire Tread: 7 mm Rear Axle 2: Axle Brand: SAF; Left Tire Tread: 5 mm; Right Tire Tread: 6 mm Rear Axle 3: Axle Brand: SAF; Left Tire Tread: 7 mm; Right Tire Tread: 8 mm Weights Unladen Weight: 7,220 kg Payload: 30,780 kg GVW: 38,000 kg Condition Kodpfx Aox Rlgqofhsll Damage: None

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Klsdpfx Asvuhcqefhel Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 29,020 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2005, loading space length: 10,560 mm, loading space width: 2,470 mm, loading space height: 1,900 mm, Equipment: ABS, Lifting axle, 50 m³ For more information please call: , ????? ?? ????? ???? ????? ???: 420734511212 Klsdpfx Afjx Ia Rxshjl

Condition: used, machine/vehicle number: YE6SZ339V600R0459, axle configuration: 3 axles, first registration: 07/2006, loading space length: 13,350 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, total length: 13,950 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = Kljdpfeu H Di Iox Afhel - Hydraulics = Remarks = Chassis Chassis height: 100 cm Height of coupling pin / drawbar: 120 cm Structure Hydraulics: ✓ Tank Fuel: ✓ Aluminium walking floor trailer, Internal dimensions 1335x247x275 cm, Volume approx 90 m3, Floor height 110 cm, Aluminium/plastic partition (manually adjustable), ABS, Air suspension, Disc brakes, Mercedes axles, Max. gross trailer weight 39000 kg, Shipment dimensions 1395x250x400 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 65%; Tyre profile right: 10% Axle 2: Tyre profile left: 75%; Tyre profile right: 15% Axle 3: Tyre profile left: 70%; Tyre profile right: 15% Weights Empty weight: 7.960 kg Carrying capacity: 31.040 kg GVW: 39.000 kg Functional Make of bodywork: Stas Height of cargo floor: 110 cm Identification Registration number: QAZ297 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: excellent (used), first registration: 05/1997, Year of construction: 1997, = Further Information = Unladen weight: 8,280 kg Payload: 25,720 kg Gross weight: 34,000 kg Technical condition: very good Optical condition: very good Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano (Available on WhatsApp and Viber). MOB: Nederlands (Available on WhatsApp and Viber). When paying by bank transfer, the funds must be transferred to our bank account as listed below. Always verify the payment details as stated on our website. If you receive different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Kledpexdtxxefx Afhel Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation. Klodpfx Afexf Sn Ijhsl