Used Stas S Semitrailers for sale (71)

Condition: used, axle configuration: 3 axles, first registration: 04/2011, loading space length: 9,000 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, total length: 11,500 mm, total width: 2,600 mm, total height: 3,700 mm, tire size: 425/65R22.5, tire condition: 60 %, color: red, Equipment: ABS, General Information Year of manufacture: 2011 Axle Configuration Tire size: 425/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 70%; Reduction: single reduction Weights Unladen weight: 7,500 kg Payload: 37,500 kg GVW: 45,000 kg Dcjdpfj Ahffwox Aafsp Functional Body manufacturer: OTHER Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-Axle Stas S 300CX Tipping Semi-Trailer VIN: 080246 Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Weweler supports * WABCO Smart Board * Alcoa aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: 1=90% 2=like new 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage box * 2x Work lights * Aluminum chassis Dedoyl N N Dopfx Aafocp Body: * Tipping semi-trailer * Hyva tipping cylinder, max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locking * Roller cover * Standing platform at the front * Portal doors 50:50 Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Tare weight: 6,050 kg Other: * German registration * New MOT / safety inspection available upon request New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary registration / Export license plates We will gladly assist you in obtaining export license plates/short-term registration. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Dcodpfx Ajfi Nmwsafjp Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Dedpfx Aajupqi Esfjcp Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: used, machine/vehicle number: YE6SZ339V600R0459, axle configuration: 3 axles, first registration: 07/2006, loading space length: 13,350 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, total length: 13,950 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, color: other, Equipment: ABS, = Additional options and accessories = - Hydraulics = Remarks = Chassis Chassis height: 100 cm Height of coupling pin / drawbar: 120 cm Structure Hydraulics: ✓ Tank Fuel: ✓ Aluminium walking floor trailer, Internal dimensions 1335x247x275 cm, Volume approx 90 m3, Floor height 110 cm, Aluminium/plastic partition (manually adjustable), ABS, Air suspension, Disc brakes, Mercedes axles, Max. gross trailer weight 39000 kg, Shipment dimensions 1395x250x400 cm = More information = General information Year of construction: 2006 Registration number: QAZ297 Djdpfxoyq R Ryo Aafscp Axle configuration Tyre size: 385/65 R22.5 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 65%; Tyre profile right: 10% Axle 2: Tyre profile left: 75%; Tyre profile right: 15% Axle 3: Tyre profile left: 70%; Tyre profile right: 15% Weights Empty weight: 7.960 kg Carrying capacity: 31.040 kg GVW: 39.000 kg Functional Make of bodywork: Stas Height of cargo floor: 110 cm = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR, approx. 100 cbm, 14.9 m internal length silver-grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: +/- 14900 MM Internal width of the body: 2475 MM Volume of the body: approx. 98.6 cbm GVW: 36 T Wheelbase: 1310 MM Unladen weight: 8500 kg Saddle height: 1150 mm TECHNICAL DESCRIPTION 1. CHASSIS SADDLE HEIGHT The exact saddle height is 1150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: included The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a trailing steerable axle. CONNECTION BRAKE WEAR INDICATOR (BVA) Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. LOCKING OF TRAILING STEERABLE AXLE Locking of the trailing steerable axle is done as follows: - via the rear lights - with a button in the truck (truck equipment not included) TIRES 6 x 385/65 R 22.5 tires for regional transport (manufacturer's choice) on aluminum rims ALCOA MATT. ET 120. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-circuit compressed air brake system acc. to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets ISO connection. Aspöck set. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD The lighting is mounted in the fixed aluminum under-ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. HYDRAULIC CONNECTION Connection on the front wall. With additional connection option below the body in front of the support legs. ACCESSORIES RETRACTABLE LADDER REAR Retractable ladder integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking. TOOL BOX PVC tool box with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER Aluminum spare wheel holder (single) 2. TIPPER BODY FRONT WALL The front wall consists of sturdy aluminum plank profiles. SEAL BETWEEN FLOOR AND FRONT WALL Fixed seal between the floor and front wall by means of an aluminum profile and PVC seal. SIDE WALLS Side walls in smooth design, inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. WEAR PLATES Wear plate in aluminum, rectangular, on the inside at the rear, 2000 (L) x 1500 (H) x 4 mm. TIPPER FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric operation. 21 slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. End plate at the rear made of stainless steel. Dsdpfxoxplxze Aafecp OPERATION OF FLOOR SYSTEM Electric operation - electrically with remote control (original Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation by means of a unique red Cargo rotary knob. TIPPER FLOOR FRAME Frame for wheelbase 7850 mm. 21 slats. FLOOR SLATS 21 aluminum slats - 8 mm ribbed with welded aluminum end caps. REAR DOOR 2 doors

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 52 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Dsdpfx Ajuar Amjafjcp Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 91 m³, Year of construction: 2024, Equipment: ABS, STAS 10mm, 91m³ volume, 2 x lift axles, SAF axles, remote control, galvanized, ADR Everything at a glance: · First registration: 26.06.2024 · Year of construction: 2024 · Color: White · Mileage: 184,898 km · Weight: 8,140 kg · Tires: 385/65 R 22.5 · Note: 3 units available immediately Special equipment: · 10 mm floor · 91 m³ volume · 2 x lift axles · SAF axles · Galvanized frame · Wabco SmartBoard · 12 pairs of lashing eyes · ADR - Type: EXII, FL, AT · Spare wheel holder · Tarpaulin flaps · Wear plates in the rear area · Remote control · Large toolbox · Hydraulic connections on the front wall · Door on the front wall · LED lights · 4 LED reversing lights · Loading pressure gauge · 2x7 + 1x15 pole electrical connection · A-sign · ADR sign · XL certificate Standard equipment: · 3-axle · Disc brakes · Roof tarpaulin with 4 tension straps · Side loading cover · Tarpaulin crank · Platform with railing · 3 steel bars · Pneumatic door locking system · Broom holder with broom · Aluminum ladder · ABS · EBS · Lifting and lowering valve · Portal doors with 3 locks · Rear light cover · 2 wheel chocks · Rear access ladder Errors, typing errors and prior sale are subject to change. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Any use, reproduction or distribution – even in part – is not permitted without express written consent. _____ Internal number for inquiries: TR26271 _____ STARENT Truck & Trailer GmbH, Bruck 49, A - 4722 Peuerbach Dsdpfx Aoz Ed Hysafscp Contact person for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. We probably speak yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact person for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space volume: 90 m³, Year of construction: 2022, Equipment: ABS, Vehicle identification number: YE6S300ZXN0000950 DE MOT inspection valid until: 08.2027, SP (Spain) valid until: 02.2027 FRAME: Aluminum welded construction with extra reinforcement at the axle suspensions. Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565/2,752 Smooth interior and exterior side walls. Side wall profiles approx. 600 mm wide, 30 mm thick, 3 mm inside, 2 mm outside (grain transport design). FLOOR BOARDS: 21 aluminum floor boards, 7 mm smooth, extremely durable with welded aluminum end caps. Cramaro overquick locking system with electric remote control. MERCEDES-BENZ JOST axles with disc brakes. 2 x LIFT AXLE Platform Wabco Smart Control Dodpszy S Taofx Aafocp Air suspension Adjustable support legs Tires: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Aluminum wheels Changes, prior sale, and errors are expressly reserved. The description serves for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. Our offer generally does not include a new TÜV (technical inspection) approval. If a new TÜV approval is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising or have lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, axle configuration: 3 axles, first registration: 06/2024, Year of construction: 2024, Equipment: ABS, STAS 10mm 91m³ 2 x Lift Axles SAF Axles Remote Controlled Galvanized ADR RENTAL Everything at a Glance · First registration: 26.06.2024 · Year of manufacture: 2024 · Color: White · Mileage: 188,873 km · Weight: 8,140 kg · Tires: 385/65 R 22.5 · Note: 3 units available immediately Special Equipment · 10 mm floor · 91m³ · 2 x lift axles · SAF axles · Galvanized frame · Wabco SmartBoard · 12 pairs of lashing eyes · ADR – Type: EXII, FL, AT · Spare wheel holder · Tarpaulin flaps · Wear plates in the rear area · Remote control · Large toolbox · Hydraulic connections on the front wall · Door on the front wall · LED lights Dcjdoz D Rh Uspfx Aafop · 4 LED reversing lights · Loading pressure gauge · 2x7 + 1x15 pole electrical connection · A-sign · ADR sign · XL certificate Standard Equipment · 3-axle · Disc brakes · Roof tarpaulin with 4 tension straps · Side loading tarpaulin · Tarpaulin crank · Platform with railing · 3 steel supports · Pneumatic door locking system · Holder for broom with broom · Aluminum ladder · ABS · EBS · Lifting and lowering valve · Portal doors with 3 locks · Rear light cover · 2 wheel chocks · Rear access ladder Errors, typing errors and prior sale are subject to change. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to copyright by STARENT Truck & Trailer GmbH. Any use, reproduction or distribution – even in part – is not permitted without explicit written consent. _____ Internal number for inquiries: TR26267 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact for Sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. Probably yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact for Purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking Dsdpeu Dvw Ssfx Aafocp FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Condition: used, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,310 mm, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Empty weight: 5.590 kg Carrying capacity: 33.410 kg Djdpfxjwzkx To Aafecp GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,821 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis Type: Sliding Floor King Pin Load (National) (t): 12 Axle Load (National) (t): 8 Axle Distance (mm): 1310-1310 Saddle Height (mm): 1150 Loading Width (mm): 2475 Technical Permissible Total Weight: 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Sliding Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (cbm): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Chassis Neck Height (mm): 217 Brake Type: Disc Brake Brake Type: SAF SBS 2220 Offset (ET): 120 Option: 1st axle with optimized starting aid Dsdpfezxvvvox Aafocp Activation of starting aid via button in the truck (button installation not included in the equipment scope) and by pressing the brake pedal three times Air Suspension: ECAS with lifting and lowering valve Lowering of air suspension via Smartboard, as well as lifting and lowering valve Coupling Head: Pneumatic European Palm Coupling Support Winches: Weweler as steel geared support winches, type Weweler, with compensating support winches, single-sided operation and 2 speed levels Operator Console: EBS operation on the left side in the direction of travel, behind the axles Position Operator Console: Sliding floor on the left side in the direction of travel, behind the axles. Toolbox on the left side in the direction of travel, behind the axles. Manufacturer Lighting: Aspöck Work Lights (operated via switch): 2 pieces LED reversing lights front in the direction of travel on the left and right, mounted in the area of the support winches Hydraulic Coupling: Swivel coupling size ?? Gender: Female Hydraulic Coupling: Return Swivel Coupling Size 1 Gender: Female Hydraulic Coupling: Hose 3,000 mm Hydraulic Coupling: Position Connection possibility on the front wall (also with connection possibility on the support legs) Type: Smartboard ECAS control box Aluminum access ladder 3.80 m on the right side in the direction of travel Broom and shovel holder on the side impact protection on the left side in the direction of travel Sliding Floor System: Manufacturer Cargo Floor Air and electrical console in the middle in the direction of travel with mounting brackets Protection of the lighting unit: One-piece mud flap Superstructure Inclination Front Wall (): 90 Inclination Rear Wall (): 90 Rear Wall Type: Swing Doors Cover Plate between Floor and Front Wall: Solid aluminum plate and PVC strips Profile Front Wall: 3 mm 2 mm in smooth design inside and outside, double-walled profiles 600 mm wide, 30 mm thick Operation of floor system: Radio remote control Cargofloor Control Type: CF 500 SL-C-?E?-Control 21 floor profiles 10 mm ribbed, residue-free discharge wall Aluminum with brushes Storage residue-free discharge wall: 6 wheels with bidirectional cleaning (loading floor) Design: swing door division ? to ?, with door closing cross member Door closing cross member in swiveling design, aluminum Locking Rear Doors: 1x turning rod / door half Additional locking rear wall: Pneumatic, single-acting Ramm Protection Rear Doors: Aluminum Ramp buffer over the entire width of the rear wall Tensioner for tarpaulin tensioning: Tensioner with handle, mounted on the underside / side wall of the superstructure Walkway on the front wall with access and bracket protection, mounted, design STAS aluminum walkway Position Access Walkway: Access ladder mounted on the left and right side in the direction of travel Step ladder in the rear end: Extendable step ladder, mounted

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total length: 11,520 mm, Equipment: ABS, Very well-maintained, absolutely clean Stahl-FerroStar FSS steel tipper. Hardox tipper body HB450 Side walls 4/3mm HB 450 Approx. 55 m³ Fifth wheel height 1,150 mm SAF axles with disc brakes Lift axle Alcoa DB aluminum rims Wing doors with grain slide Roll-up tarpaulin Platform Aluminum side supports Smart Board Dcsdpfx Aajz Id Ayofsp Loading pressure gauge Storage box Ladder 2 air vibrators etc. Further information available upon request.

Condition: used, maximum load weight: 27,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/1996, Year of construction: 1996, Equipment: ABS, * STAS 0-34/3A tipper trailer with dump body (40 m3) * Year of manufacture: 1996 * Lift axle * Tipper internal length: 8.70 m * Tipper internal width: 2.40 m * Tipper internal height: 1.85 m Dcjdpszrklrsfx Aafjp * Tare weight: 6600 kg - Gross vehicle weight: 34000 kg * Payload: 27400 kg - Wheelbase: 4500/1325/1325 mm * All information is subject to change without notice * Errors and prior sale excepted

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, Equipment: ABS, ferroSTAR 55 cbm Chassis material: Steel Chassis type: Z-chassis King pin load (national) (t): 12 Axle load (national) (t): 8 Axle track (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Loading width (mm): 2325 Internal height at the front (mm) (IHF): 2,285 Internal height at the rear (mm) (IHB): 2,285 Loading length (mm): 10149 KC-Value: 0650 Overall width (mm): 2550 Volume (m³): 55.00 Wheelbase (mm) (WB): 6,600 Overall length (mm): 11,501 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: First axle with lift axle and starting assist Activation of starting assist via button in the truck (mounting of the button is not included in the scope of supply) and by pressing the brake pedal three times Option 3: Third axle with lift axle Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, and switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side, in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side, in the direction of travel Support legs: JOST MODUL type Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo Rear lights: 2 LED reversing lights, mounted at the rear, on the left and right, on the lamp carrier Position: Work lights (operated via switch) 2 LED reversing lights at the front, on the left and right, in the area of the support legs Underbody protection: Manual operation Splash guards: Underbody protection, black with STAS logo Tilting cylinder: Hyva (STAS manufacturer's choice) Dodpfx Aozdw Ttsafecp Tilting cylinder type: Cylinder with small casing Cylinder tilting angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Tilting cylinder stroke: 7130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Rotary coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Fenders: Domar STAS with white stripe Splash guards: Fender, Clear Pass Toolbox: On the left side, in front of the axles Aluminum extension ladder with a length of 2.8 m, mounted on the right side Position: Broom and shovel holder with 3 holders each, mounted on the chassis on the left side Load pressure gauge: Ø 100 mm - mounted at the front of the chassis Two plastic wheel chocks Locking device: Chassis - superstructure, rubber bumpers Front wall: Made of 3 mm HB450 Side wall: Made of 4/3 mm HB450 Floor: Made of 5 mm HB450 Position: Rubber pads attached under the floor crossbeams Rear wall type: Swing doors Rear wall: Made of 3 mm HB450 Number of hinges: Rear wall: 3 pairs of door hinges Design: Swing door, divided 1/2 to 1/2, with 1 piece of latch Opening of the door leaves: Right first opening Fastening of the open door leaves: Via chain Sealing: Rear wall with rubber sealing in the lower area, extending 1,000 mm to the side Additional locking: Rear wall, pneumatic

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Djdpfx Ajfi Nmpeafecp Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: used, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, loading space length: 10,610 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5748 Rental vehicle – available for purchase, rental, or lease with an option to buy, upon agreement. STAS 60 m³ sliding floor trailer with Cargo Floor and remote control – for rent! ----* Manufacturer: Stas * Type: Farmstar * First registration: 04/2026 * Color: Body RAL 9007 grey-aluminum, chassis RAL 9005 black, tarpaulin black * Volume: 60 m³ (approx. 10.61m long x 2.475m wide x 2.30m high) Dsdpfx Aeyz H S Aeafecp * Gross vehicle weight: 39,000 kg (technical) / 36,000 kg (permissible) * Unladen weight according to vehicle registration: 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle: lift axle / starting aid / disc brake * Tires: 385/65R 22.5 NEW on Speedline Diamond aluminum rims * Suspension: Air suspension with raising and lowering function * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-slat system with additional plastic profiles below the floor profiles * End caps, floor made of stainless steel * Floor 6mm ribbed * Moving bulkhead with stainless steel handles * Control box at the rear, left side * Control platform with access ladder at the front, right and left side * Hydraulic connections at the front with 3m hoses (with additional connection option to the support legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2x twist locks and 1x pneumatic locking * Side walls in smooth design, inside and outside (grain version), welded * Roll-up tarpaulin (680g/m²) with central locking * 3x crossbeams * Individual fenders * Full-load supports * Toolbox at the rear, right side * Shovel and broom holder, left side * Smartboard * TPMS tire pressure monitoring system * Aluminum ladder, right side * Extendable ladder at the rear, right side * Aluminum rear impact guard * One-piece aluminum sheet, foldable, for protecting the rear lights * 2x LED work lights (left + right) * 2x LED reversing lights at the rear * 2 x 3 LED?s in the door closure crossbar Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or the details provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2012, loading space volume: 58 m³, total length: 11,490 mm, total width: 2,550 mm, suspension: air, wheelbase: 8,210 mm, color: red, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - EBS (Electronic Braking System) - Lift axle - LED lights - LED work lights - Air suspension - Roll tarp cover - SAF axles - Disc brakes Dedpfx Aajyz It Isfjcp = Further Information = Axle Configuration Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Weights Empty weight: 7,000 kg Payload: 36,000 kg Gross vehicle weight: 43,000 kg Functionality Tipper: Rear Condition Technical condition: Very good Optical condition: Very good Damages: None Identification Registration number: OL-35-SK = Company Information = Looking to finance this vehicle? No problem. We can quickly arrange an affordable finance lease agreement for you with terms of 12, 24, 36, 48 or 60 months. You can find all photos and further information at or contact us directly.

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 91 m³, Year of construction: 2024, Equipment: ABS, STAS 10mm, 91m³, 2 x lift axles, SAF axles, remote control, galvanized, ADR Everything at a glance: · First registration: 26.06.2024 · Year of manufacture: 2024 · Color: White · Mileage: 190,910 km · Weight: 8,140 kg · Tires: 385/65 R 22.5 · Note: 3 units available immediately Special features: · 10 mm floor · 91m³ · 2 x lift axles · SAF axles · Galvanized frame · Wabco SmartBoard · 12 pairs of lashing eyes · ADR, type: EXII, FL, AT · Spare wheel holder · Tarpaulin flaps · Wear plates in the rear area · Remote control · Large toolbox · Hydraulic connections on the front wall · Door on the front wall · LED lights · 4 LED reversing lights · Loading pressure gauge · 2x7 + 1x15 pole electrical connection · A-plate · ADR plate · XL certificate Standard features: · 3-axle · Disc brakes · Tarpaulin roof with 4 tension straps · Mud flap for side loading · Tarpaulin crank · Platform with railing · 3 steel supports · Pneumatic door locking · Holder for broom with broom · Aluminum ladder · ABS · EBS · Lifting and lowering valve · Portal doors with 3 locks · Rear light cover · 2 wheel chocks · Access ladder at the rear Errors, misprints and prior sale reserved. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Any use, reproduction or distribution - even in part - is not permitted without express written consent. _____ Internal number for inquiries: TR26261 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact persons for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Dcodpfx Asz Am Nhoafep Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. Probably also yours. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as semi-trailer tractors, trailers, trucks and vans. Contact persons for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, empty load weight: 7,390 kg, axle configuration: 3 axles, first registration: 09/2026, loading space length: 8,912 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 47 m³, total length: 10,289 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 4,490 mm, color: silver, Year of construction: 2025, mileage: 2,000 km, gearing type: mechanical, fuel consumption (urban): 1,028 l/100km, lifting height: 3,800 mm, Equipment: ABS, Unladen weight: 7390 kg, cargo space (L W H): 8,912 mm x 2,325 mm x 2,285 mm, tire size: 385/65 R22.5, cargo space volume: 47 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, lift axle, electronic braking system EBS, grain conveyor, tarpaulin roof, aluminum rims, storage compartment, errors and changes excepted. Vehicle is sold on consignment. Vehicle location is in Steyr, Upper Austria. Vehicle is without registration – new vehicle. Dcjdpfx Ajz Awu Ieafep

Condition: used, functionality: fully functional, machine/vehicle number: YE6S300ZX00080084, empty load weight: 7,810 kg, maximum load weight: 34,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 09/2027, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R 22,5, color: black, Year of construction: 2024, Equipment: ABS, Item number: #31160 Lift axle Portal doors Disc brakes Cargofloor load floor, 8 mm Platform with ladder Moving side wall Pneumatic door locking system Simple twist locks on the outside 12 pairs of recessed lashing rings Roller cover Lift axle A1/A3 Grain discharge chute Holder for ladder/broom Wabco Smart Board 2x LED reversing lights ABS/EBS Weweler kingpin supports Raising/lowering mechanism 2x toolboxes ASW (anti-spray flaps) Side protection cover Axle manufacturer: Jost Axles: 3 Tires: 358/65 R 22.5 Dcjdpjz R Sh Eofx Aafsp Body dimensions: 13,513 x 2,475 x 2,700 mm Leasing or financing options available upon request!

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Dcedpfofakkcex Aafop Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: used, axle configuration: 3 axles, Year of construction: 2008 Empty weight: 4.890 kg Dcsdpfxjz A Hlgo Aafop Carrying capacity: 34.110 kg GVW: 39.000 kg

Condition: new, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5739 Immediately available! Purchase, lease or lease with purchase option available upon agreement! Approx. 91m³ Stas moving floor trailer with 10m floor / radio remote control / front maintenance door / RENTAL / PURCHASE ---- * Manufacturer: Stas * Model: S300ZX Biostar * Year of manufacture: 2026 * Gross vehicle weight: 42,000 kg Dcsdpfjyz H Spox Aafep * Unladen weight (manufacturer specifications): 7,800 kg * Payload: 34,200 kg * Axles: 3x SAF, 1st axle lift axle with starting aid / disc brakes * Tyres: 385/65 R22.5 on steel rims * Suspension: air suspension with ECAS lift/lower function * EBS * Capacity: approx. 91m³ (13.50 m long x 2.47 m wide x 2.82 m high) * Colour: Body RAL 9006 / tarpaulin black SIO7999 / galvanized chassis * Twin rear doors with pneumatic locking * Extendable access ladder on right-hand side * Lift axle starting aid activated via truck control button * Smartboard * Telescopic landing legs * PVC toolbox 830x500x470 mm * 2 LED reversing lights, rear left and right * 2 LED reversing lights at rear supports * 1 LED front wall interior light * Ecoled 2 LED taillights * Cargo Floor 10 mm ribbed CF500SL-C -E Control * V2A stainless steel rear panel * Additional plastic guides below floor profiles * Radio remote control * Moving bulkhead wall * Rolling tarpaulin with Panama tension straps, 900 g/m² * Tarpaulin stoppers * Service door at front * 2 x 3 LED in the door crossbeam * Smartboard German trailer! German papers! NEW VEHICLE! Notice regarding possible listing errors: Despite careful preparation of this listing, occasional errors in the text or details cannot be excluded. We do not assume liability for mistakes, changes or interim sales. All information is supplied without guarantee. Please contact us to verify details or for further questions.