Used Stas Agrostar Semitrailers for sale (103)

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2019, * Lift axle * Alloy wheels * JOST axles * Sliding tarpaulin * Unladen weight: 7,760 kg ----- Internal vehicle number: 10296 ---- Subject to errors and prior sale WhatsApp support available! If you have any questions about the vehicle or would like further information, feel free to contact us conveniently via WhatsApp Gkedpfx Apew Rit Teqea WhatsApp WhatsApp

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 09/2026, loading space length: 13,179 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Equipment: ABS, * Stas walking floor trailer * Tarp cover * Alloy wheels Gkjdpfxexu Th Uo Apqoa * SAF axles * Unladen weight: 7,790 kg * Year of manufacture: Internal vehicle number: 11498-----Errors and prior sale reserved.

Condition: new, maximum load weight: 30,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,664 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 52 m³, Year of construction: 2025, Brake system: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles controlled via the EBS-E system ----Suspension: * Air suspension with lift and lower system (automatic lowering during tipping operation—can be manually locked via SmartBoard—as well as via switch on chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Starting aid is activated via button in the truck—no truck-side installation required—as well as by pressing the brake pedal three times * 2 x 7-pole and 1 x 15-pole sockets * Aspöck LED lighting * 2 LED reversing lights (controlled by reverse gear) * Each side in the area of the landing gear supports has 1 LED work light ----General Attachments: * Aluminum air tank * Weweler hand-crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims Gkjdpfx Apowgg Uzjqoa * 1 x plastic toolbox approx. 860 x 520 x 500 mm on the left side * Air gun with 16 m hose reel in the toolbox * Enclosed single plastic mudguards * 1 dust bag including mount on the right side * 3 m aluminum ladder stored on the right above the mudguards * Shovel and broom holder on the left above the mudguards * Load pressure gauge mounted at the front of the chassis * Access stairs and standing platform mounted on the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping body—rectangular—with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted inside the tipper body on the front wall, left side * Smooth inner and outer side walls * Double-walled 600 mm side wall profiles—30 mm thick—3 mm inner and 2 mm outer layer * Side wall profiles are fully welded inside, 90° corners using an angle profile between floor and side walls, allowing for full floor width utilization * Top rail, 90 mm wide * 6 mm wear-resistant aluminum floor in 110 Brinell quality * Combination double-wing rear doors—straight version with double door hinge and reinforcement profiles, each with 1 grain chute and all-round rubber seal * When opened, the doors are secured with chains, allowing the doors to lie as flat as possible against the side walls * 4-position door locking hooks at the bottom open automatically during tipping—can be pneumatically locked via valve on the frame ----Roll tarp: * Roll tarp—in RAL 9005 deep black—with three side tension straps * Trapezoidal tarp support, 150 mm high, on front wall and tailgate ----Load volume: * Load volume 51.8 m³ ----Fifth-wheel height: * Fifth-wheel height 1,150 mm ----Information: * Body and chassis painted with acrylic paint in RAL 9005 deep black * --Technically permissible gross weight of 39,000 kg-- * New vehicle without first registration with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2023, Year of construction: 2023, Equipment: ABS, Visit our website, where you will find our complete vehicle inventory with many more photos and information in multiple languages. SEL 8347 STAS S300ZX ADR type EX II, FL, OX, and AT / 2 lift axles German registration / Single owner First registration: 06.02.2023 Year of manufacture: 2023 Gross vehicle weight (kg): 42,000 Permissible total weight (kg): 42,000 Unladen weight (kg): 7,990 VIN: YE6S300ZXN0007 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 Jost axles 1st and 3rd lift axle Air suspension Disc brakes BODY: Internal dimensions: Height (m): 2.83 (2.68) Width (m): 2.48 Length (m): 13.50 OTHER SPECIFICATIONS: ADR type EX II, FL, OX, and AT Gksdpex Ep A Sofx Apqoa VEHICLE DOCUMENTS: Registration certificate (Schein) Vehicle title (Brief) M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian, Russian) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information provided, we cannot accept liability for errors or omissions. We kindly ask our customers to consult the photos available. The specified measurements are approximate values. Our vehicles are sold in their present condition. We invite customers to visit our company to inspect the vehicle's condition in person. A test drive can also be arranged. Please note that the batteries delivered with the vehicle are those currently installed. Should the customer require new batteries, we are available to provide pricing information.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 03/2026, Equipment: ABS, Stas S300ZX Moving Floor Trailer 90 m³ * 90 m³ capacity * SAF axles * 1st and 3rd axle liftable * Air suspension * Pneumatic control * Disc brakes * Rolling tarpaulin * Smartboard * Double-wing rear door with rotary bar lock * Access ladder and platform at the front wall * ABS connector * 2 x 7-pin electrical connection * ISO pneumatic couplings with red and yellow coupling heads * 21 planks * Lashing rings on the sides of the loading area * Foldable rear light guards * Load pressure gauge Subject to prior sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important Notice: Despite thorough checking of all details in our offer, errors may occur. Some are caused by transmission faults from various platform providers’ systems. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Gkjdpfx Apjxyciljqsa Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it contains information for initiating a contract. All details given are without guarantee and do not represent warranted characteristics.

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 03/2027, loading space length: 1,055 mm, loading space width: 2,360 mm, loading space height: 2,160 mm, loading space volume: 53 m³, total width: 2,550 mm, total height: 3,829 mm, Year of construction: 2019, Equipment: ABS, 3-Axle STAS S 300CX ALU Tipping Trailer MultiSTAR-V100 VIN: 000737 Chassis / Attachments: * Air suspension / raising and lowering * Lift axle, 1st axle * Jost landing legs * WABCO Smart Board * Alcoa Dura-Bright aluminum rims * Tires: 385/65 R 22.5 * Tire tread remaining: Front ~60/50%, Middle ~90/80%, Rear ~90% * 3 x SAF tridem axles with disc brakes * 1 x PVC tool box * 2 x work lights * ALU chassis Body: * Aluminum box tipper * EDBRO front cylinder * Capacity: approx. 53 m³ * Floor plate: 8 mm * Fixed walkway, access on the left * Combo door can be opened to the left + pendulum function * Manual locking * Roll cover * Extendable rear ladder under tipper body Weights: * Gross weight: 36,000 kg * Payload: 29,630 kg Gkjdpfx Apjyw Dntoqea * Tare weight: 6,370 kg Other: * German registration * 1 previous owner * MOT & Safety Inspection 09 / 2026 ---- New main inspections, safety checks or weight reductions/increases available on request. We are happy to assist you in obtaining export/transfer plates, and can also arrange transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our corporate philosophy stands for fairness and reliability. Customer satisfaction is particularly important to us, so we offer our customers an excellent all-round service package and provide a competent contact person who will support you with the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Temporary/export license plates We are happy to help you obtain export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: new, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 91 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel Gjdpoy Dmu Nsfx Apqoka * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: used, axle configuration: 3 axles, first registration: 04/2000, total length: 10,200 mm, total width: 2,550 mm, total height: 3,500 mm, suspension: parabolic leaf (spring), tire size: 385/65 R22,5, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - Leaf spring suspension = Further information = Tire size: 385/65 R22.5 Axle brand: ROR Suspension: Parabolic spring suspension Unladen weight: 5,880 kg Payload: 32,120 kg Gedpfxezam A Dj Apqoka GVW: 38,000 kg Tipper: Rear

Condition: used, axle configuration: 3 axles, first registration: 02/2005, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Tyre size: 385/65 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Gjdpfxoy Uly Eo Apqoka Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: used, maximum load weight: 35,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space length: 10,485 mm, loading space width: 2,474 mm, loading space height: 1,895 mm, loading space volume: 49 m³, Equipment: ABS, STAS S300CX 49 m³ In operation since 5/2021 Lifting axle ADR: EXII, FL, OX, AT Loading area: 10,485 x 2,474 x 1,895 mm Wheelbase 1,410 mm Axles 9 tonnes SAF axles Combination door Tarpaulin Disc brakes Tyres 385/65 R22.5 Condition: 1st axle 10 mm 2nd axle 11 mm 3rd axle 12 mm Spare wheel Operating weight 6,420 kg Gross weight 42,000 kg NEARLY NEW? ONLY USED FOR AGRICULTURAL PRODUCTS! Godpfew I Ivzex Apqeka More at: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALE OF TRUCKS AND CONSTRUCTION MACHINERY TRUCK SERVICE TYRE SERVICE TRUCK WASH TACHOGRAPH INSPECTION

Condition: used, maximum load weight: 27,910 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2014, Equipment: ABS, German semi-trailer, first owner, good condition. STAS S 300 ZX walking floor semi-trailer, CargoFloor floor with cable remote control, SAF axles with disc brakes, first axle is a lift axle, portal doors with rotary latch + pneumatic locking, work platform, roll tarp, 1x plastic toolbox, spare wheel holder, rear step ladder, Wabco SmartBoard, air suspension with raising/lowering function, ABS, EBS, electrical connections: 1x 15-pin and 2x 7-pin, etc. Gjdpfjy Ubg Iex Apqjka Tire size: 385 / 65 R 22.5, tread depth: 14 / 14 / 13 / 11 / 8 / 6 mm Permissible total weight: 36,000 kg / Unladen weight: 8,090 kg / Payload: 27,910 kg !!! I SPEAK POLISH !!! WE SPEAK ENGLISH !!!

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. Gsdpfexplxzjx Apqeka PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2021, loading space volume: 92 m³, suspension: air, tire size: 385/65R22,5, color: grey, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - Alcoa Dura Bright wheels - Cargo Floor - EBS (Electronic Braking System) - Rear doors - Lift axle - LED lights - LED work lights - Alloy rims - Air suspension - Spare wheel - Sliding tarp cover - Disc brakes = Notes = Stas Walking Floor Year of manufacture: 07-2021 AS-1 Lift axle AS-3 Lift axle Alcoa Dura Bright rims Wabco Smartboard 2 stainless steel storage boxes Headboard door Gsdpoy Ndnqefx Apqoka Spare wheel holder with spare wheel Water tank under chassis = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle make: Mercedes Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Alloy rims; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 7,890 kg Payload: 34,110 kg Gross vehicle weight: 42,000 kg Condition Technical condition: Good Optical condition: Very good Damages: None = Company Information = Want to finance this vehicle? No problem. We will swiftly arrange a favorable finance lease agreement for you with a term of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly.

Condition: used, empty load weight: 6,340 kg, overall weight: 39,000 kg, Year of construction: 2002, Equipment: ABS, STAS SA339K/ALU Year built: 2002 Gkjdpfsvdru Aox Apqea Axles 3 ABS Air Total weight: 39000 kg Empty weight: 6340 kg

Condition: used, empty load weight: 5,635 kg, overall weight: 36,000 kg, Year of construction: 2015, Equipment: ABS, STAS/ ALU/ PLANE Year of construction: 2015 2 Axles Empty weight: 5635 kg Total weight: 36000 kg Gjdpfovdrtlox Apqeka ABS EBS

Condition: used, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,310 mm, Year of construction: 2013, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Gedpfswzkx Tex Apqska Empty weight: 5.590 kg Carrying capacity: 33.410 kg GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: used, machine/vehicle number: YE6SZ339V600R0459, axle configuration: 3 axles, first registration: 07/2006, loading space length: 13,350 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, total length: 13,950 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Hydraulics = Remarks = Chassis Chassis height: 100 cm Height of coupling pin / drawbar: 120 cm Structure Hydraulics: ✓ Tank Fuel: ✓ Godjyq R Ryjpfx Apqjka Aluminium walking floor trailer, Internal dimensions 1335x247x275 cm, Volume approx 90 m3, Floor height 110 cm, Aluminium/plastic partition (manually adjustable), ABS, Air suspension, Disc brakes, Mercedes axles, Max. gross trailer weight 39000 kg, Shipment dimensions 1395x250x400 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 65%; Tyre profile right: 10% Axle 2: Tyre profile left: 75%; Tyre profile right: 15% Axle 3: Tyre profile left: 70%; Tyre profile right: 15% Weights Empty weight: 7.960 kg Carrying capacity: 31.040 kg GVW: 39.000 kg Functional Make of bodywork: Stas Height of cargo floor: 110 cm Identification Registration number: QAZ297 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, empty load weight: 11,245 kg, overall weight: 36,000 kg, Year of construction: 2009, Equipment: ABS, STAS/ALU/TIPPER Year of construction: 10/2009 2 axles Total weight: 36000 kg Gjdpfx Asvdrt Sjpqska Empty weight: 11245 kg ABS

Condition: used, axle configuration: 3 axles, first registration: 05/2001, loading space length: 8,300 mm, loading space width: 2,200 mm, loading space height: 1,400 mm, total length: 9,860 mm, total height: 2,900 mm, suspension: air, tire condition: 25 %, Year of construction: 2001, Tyre profile: 25% Brakes: disc brakes Suspension: air suspension Empty weight: 6.080 kg Carrying capacity: 31.920 kg GVW: 38.000 kg = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : Godpfx Apsuzn N Ieqska We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. See our company video:

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, Westinghouse two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, Edbro hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, preparation for floor vibrator, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE Gkjdpfx Asu Dvw Eopqsa +590¤ Transfer costs *Pictures and offers are subject to change*

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, Godjyh S Aijpfx Apqska electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Gjdpjfakkcefx Apqeka Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 Gsdpfx Ajfi Nmpjpqoka -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. ----Example: high-quality aluminum chassis with high-strength steel body, ACTUAL 7,160 KG, Chassis with 3x9-ton axles, DCA, with 430mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting assist, aluminum drop-side supports (can be uncoupled when loaded), foldable underrun protection, digital load gauge as axle load indicator, toolbox, extension ladder, Body made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, split rear doors 1/2 - 1/2 with a grain slide on the right, secondary release for the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), tarpaulin with a rod in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650 mm, (the vehicles shown may include some special equipment) ----Further equipment details and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Painting and equipment according to customer's request Gjdpfx Apehfiqceqeka +500 EUR delivery costs Offers and images are subject to change.

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Gedsfi Nmwepfx Apqjka Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla