Used Three-Way Tipper Trailers for sale (500)

Condition: new, loading space length: 3,610 mm, loading space width: 1,850 mm, loading space height: 1,000 mm, tire size: 195/50R13, Variant steel 3 side tipper 361x185x100cm 3500Kilo Special equipment -35cm drop sides hot-dip galvanized steel -35cm side walls hot-dip galvanized steel Internal dimensions: 361cmx185cmx100cm, 3.500kg tandem 2 axle + parabolic suspension incl. 100 Kmh Including 3mm edged steel floor LED lighting included -Stable support wheel With ramp shafts Total weight (kg):3.500 - braked double axle Operation: electric pump + emergency hand pump Tires: 195/50R13 Dkedpfxsq Ehtlj Ak Tst Accessories: -flat cover -box lock -Higher dropside for an extra charge If you are offered the same trailer at a lower price, please present it to us !!! If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, maximum load weight: 5,600 kg, overall weight: 7,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, loading space height: 400 mm, total width: 2,200 mm, total height: 1,400 mm, Year of construction: 2026, * Humbaur HTK 754020 * Three-way tipper trailer * New vehicle * Tandem axle * Year of manufacture: 2025 * Gross vehicle weight: 7,500 kg * Unladen weight: 1,900 kg * Payload: 5,600 kg * Overall dimensions: 6040 mm x 2200 mm x 1400 mm * Internal dimensions: 4000 mm x 2030 mm x 400 mm * Loading height: 920 mm * Steel side and rear walls fold-down and removable * Rear wall pendular with central locking * Height-adjustable drawbar approx. 590 mm - 930 mm * Torsion bar axles and parabolic suspension * Integrated slot for loading ramps * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made from 4 mm steel sheet Dksdottfm Hspfx Ak Tet * 3 pairs of recessed lashing points * Air brake system with ALB / ABS ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend an inspection and assessment to avoid misunderstandings regarding condition and suitability for the buyer. Inspections and assessments are possible at any time by appointment and are expressly encouraged!!! Images for illustration only; may include accessories subject to additional charges. The above-stated internal dimensions are approximate. For new vehicles, additional costs for freight and documentation may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND TOP-UP PAYMENTS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, Equipment: ABS, * Drum brakes * Storage compartment for ramps Dkedpfewdcg Ijx Ak Tot * Aluminium ramps, load capacity 8,000 kg per pair on request, price: 1,800 euros net * Frame completely hot-dip galvanized * 10 lashing eyes on the loading area * Loading height approx. 990 mm * Height-adjustable tow arm * Side walls spring-supported * Trailer immediately available * Suspension: leaf * Payload: 8,750 kg * Tires: 235/75R17.5 ----Information non-binding - errors not excluded - sale reserved

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Djdszwa Imopfx Ak Tokt Further information New: No

Condition: used, maximum load weight: 18,390 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 07/1998, next inspection (TÜV): 12/2026, loading space length: 6,500 mm, loading space width: 2,500 mm, loading space height: 800 mm, total width: 2,500 mm, total height: 2,500 mm, Schröder Wiesmoor A24K3 Three-way Tipper * Three-way tipper * Truck trailer * Tipping trailer * Turntable axle * 3 axles Dkedsx Ibl Rjpfx Ak Tet * Air suspension * First registration: 07.07.1998 * Next inspection: 12/2026 * Gross vehicle weight: 24,000 kg * Unladen weight: 5,610 kg * Payload: 18,390 kg * Overall dimensions: 8,650 mm x 2,500 mm x 2,500 mm * Internal dimensions: 6,500 mm x 2,500 mm x 800 mm * Steel floor * Folding steel side walls (stakes also fully removable) * Central locking * Fixed front wall * Air brakes * Hydraulic tipping function * Tyres: 386/65R22.5 156J * Tyres as new * Reversing lights * Warning panel IMPORTANT!!! PLEASE READ!!! We explicitly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend viewing and inspection, so that buyers have a clear understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images may be similar, may contain optional equipment subject to extra charge. Internal dimensions are approximate. Errors and typographical mistakes excepted, all information without guarantee! TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Condition: new, Special Price! Stock vehicle from 2023! No initial registration! 9930205 Robust rear tipper with rear pendulum tailgate Manufacturer: Brian James Trailers Type: Cargo Tipper 3 - Tri-axle Internal dimensions: 4000 x 2000 x 300 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,200 kg Payload: approx. 2,300 kg (Payload figures may vary depending on equipment and configuration) Electronic hydraulic pump with cable remote control and main switch Reinforced steel side panels Rear pendulum tailgate Dkedpfx Ajy I Uwtok Tet Corner and center stanchions can be easily removed without tools 8 strong tie-down points on the loading area, covered with spring steel plates (4 per side) Heavy-duty mesh hooks under the loading platform Ramp compartment for easy retrofitting of loading ramps Lockable coupling head Spare wheel mounted at the rear Toolbox mounted on the drawbar Battery charging cable Automatic jockey wheel Including vehicle documents Brian James Article Number: 526-4020-35-3-12 Available options and accessories for this trailer: - Individual perforated steel ramps, stowable underneath (1.8 m and 2.35 m) - Perforated mesh extension with rear and front grille - 740 mm additional side wall extension - Support stands - Electric winch - Shock absorbers incl. 100 km/h approval

Condition: used, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2026, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, * Color of the tipping body: Ruby Red RAL 3003 (CharterWay) * 9 tons each (technical axle load) * Drum brake, size 420 x 180 mm, with asbestos-free brake linings and closed brake drum * Offset ET0 (S-hub) * Standard wheel bolts * Electronically controlled two-circuit pneumatic brake system (EBS E+RSS) compliant with EC, with automatic load-dependent brake valve (ALB) Spring accumulator cylinder and two keyed coupling heads * ABS 2S/2M (Wabco), with connecting lines * Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for concrete mixers * Tire size 385/65 R 22.5, profile S * Painted steel rims * Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141 * 1/2 shell fenders with splash guard * Plastic fenders * Rigid underrun protection according to ECE R-58 (R58-03) * Floor 5 mm HBW 450 (Hardox 450 or comparable material) * Front wall 3 mm BS 70 * Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Oscillating and folding left side wall with spring relief * Oscillating right side wall * Spring relief on the left side wall * Oscillating rear wall * Rear wall with cam lock * Fixed rear corner posts * Fixed left front corner post * 150 mm long, fixed, straight discharge chute * Safety support for the tipping body * Metering device using chains * Access ladder on the left side of the front wall * Without towing hitch * Two keyed coupling heads with integrated line filters * Aluminum air reservoir * 7-pole ABS connecting cable for EBS brake system * 1 x 15-pole front adapter according to ISO 12098 Dsdpfx Aezu D N Njk Tekt Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098 * 1 x 15-pole electrical connecting cable (Wendelflex) * Hydraulic oil filling with HLPD-22 mineral oil Note: not in conjunction with kit shipment * Painting of the chassis frame (main frame, axle supports and underrun protection - excluding mounted parts) in standard colors (all colors except metallic and special colors) * Color of the chassis frame: Black * Painting of the tipping body overall in standard color * Tipping body color * Individual inspection (e.g. TÜV or Dekra) or COC * Contour marking according to EC: white on the sides, yellow on the rear * Manufacturer's certificate * COC Note: The COC is not yet available for all MEILLER products * 1 year warranty period excluding the required annual inspections (UVV inspections) * 24-volt five-chamber rear lights with integrated triangular reflectors according to ECE-R 48 incl. lamp protection * MEILLER standard axles (SAF or BPW) * Flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipping body floor Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed. * PREVANTEC S package consisting of oscillating and folding left side wall and flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipping body floor according to DIN EN 12640 Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed. * Tipping body width 2,380 mm All information without guarantee / subject to change.

Condition: new, empty load weight: 1,171 kg, maximum load weight: 2,329 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 1,970 mm, loading space height: 400 mm, Year of construction: 2026, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Temared Tipper 4020/3 C S Three-way tipper Car trailer Condition: New (Year of manufacture: 2026) 2 years main inspection from the date of first registration Incl. registration documents (vehicle registration certificate / Registration Certificate Part II and COC) Available from: Approx. 6 weeks after order placement (non-binding) Financing possible through our partner banks! Technical Data Permissible total weight: 3,500kg Unladen weight: approx. 1,171kg Payload: approx. 2,329kg Number of axles: 3 Loading length: 4,050mm Loading width: 1,970mm Loading height: 400mm Brake type: Braked, overrun brake Dksdpfx Aou Sla Esk Tot Chassis: High loader (wheels under body), rubber suspended axles Electrics: 12V, 13-pin plug Tyre size: 195/50 R13C Special equipment Steel side walls Equipment Electric and emergency manual pump (tipping function) Support legs Automatic jockey wheel Rear drop or swing tailgate Side walls foldable and removable Corner posts removable Frame welded and galvanized Ramp compartments Steel floor plates Wheel chocks Lashing rings V-drawbar AL-KO or Knott axles and brake system Optional accessories (extra charge) 100km/h certificate incl. retrofit kit with 6 wheel shock absorbers (towing vehicle unladen weight min. 3,182kg) Aluminium loading ramps Aluminium side walls Aluminium side wall extension 30cm Assembly for aluminium side wall extension Trailer lock Mesh extension 63cm LED lighting Spare wheel 195/50 R13C incl. bracket Lashing strap Steel loading ramps Steel sheet extension 40cm or 60cm Vehicle delivery throughout Germany (individual transport quote on request) Registration within 25km area (processing by Autohaus Möller) Nationwide registration (processing by registration service) Export plates (15 days validity) Export plates (30 days validity) Temporary plates (5 days validity) Customs clearance Sending of vehicle documents for registration (deposit required) Note The images show equipment subject to an extra charge (spare wheel holder). Weight specifications may vary depending on the equipment...

Condition: new, maximum load weight: 2,100 kg, overall weight: 3,000 kg, loading space length: 3,100 mm, loading space width: 1,760 mm, loading space height: 400 mm, Year of construction: 2025, Buy online and save at trailer-shop Many models available online at ANHÄNGERWIRTZ Conveniently buy online 24/7 Pick up yourself or have it delivered. The online pick-up market for your new trailer offers strong brand-name products! Over 850 new trailers in stock Over 130 used trailers constantly on offer. Non-binding example: order and pick up directly from our showroom Saris tipper 3 SKS 310 176 40cm steel walls HD, electric emergency pump, aluminum ramps, supports, 3000kg, 100km/h Three-sided tipper, heavy-duty series, steel floor, 310 176, 3000, 2 HDS E, 310x176x40cm 3000kg tandem high-loader chassis with wheel shock absorber, suitable for 100km/h, with V-drawbar, 40cm galvanized steel walls with angled lever lock, pivoting tailgate, electrically hydraulically tippable and emergency pump, 4 lashing eyes on the right and left, 250cm aluminum loading ramps with hook profile, telescoping rear supports, automatic support wheel HD.... Only while stocks last! Dkodpfszx Nzxsx Ak Tjt Invoice including VAT. Warranty - trailer dealer for over 34 years Sales, telephone order taking at the following times: MON - FRI 08:00 - 12:30 and 14:00 - 18:00 or 24/7 via our online shop at trailer-shop.de Color and rear ramp may vary Copyright - trademark protection 09/26 Article no.: Article no.: 99K3HDS0206

Condition: used, tire size: 302/65R, maximum speed: 25 km/h, front tire size: 302/65R, rear tire size: 302/65R, Equipment: compressed air brake, Tyres (front): 302/65R, Tyres (rear): 302/65R, tarpaulin, two-axle, turntable_____Fortschritt HW 80 with drawbar, workshop inspection carried out on the first trailer, including inspection and painting of the second trailer. Storage location: 17094 Pragsdorf Dkjdpfxozdhlho Ak Tet

Condition: used, empty load weight: 3,210 kg, maximum load weight: 8,690 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2021, next inspection (TÜV): 06/2026, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 500 mm, suspension: steel, tire size: 235/75 R17.5, Year of construction: 2021, Equipment: ABS, German Vehicle MASTERLINE Dedpfxeyw N Nps Ak Tekt Müller-Mitteltal KA-TA-R 11.9 Three-Way Tipper with Underfloor Ramps First registration: 05/2021 Galvanized Gross weight: 11,900 kg Tare weight: 3,210 kg Payload: 8,690 kg Tire size: 235/75 R 17.5 Tandem axle distance less than 1 m Continuously height-adjustable drawbar, hot-dip galvanized, 40 mm towing eye Frame galvanized BPW axles Floor height: 0.93 m Additional services available! Export license plates (Red / 30 days) Germany Temporary license plates (Yellow / 5 days) Germany Transfer license plates for Austria can be arranged Vehicle delivery (for a fee) The information provided on the Internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to prior sale. Sale only to commercial customers. Our general terms and conditions apply exclusively.

Condition: new, maximum load weight: 2,620 kg, overall weight: 3,500 kg, axle configuration: 2 axles, EDUARD 3533-P-63 THREE-SIDED DUMP TRAILER WITH COMBINATION PUMP Technical Data * Trailer type: Eduard 3533-P-63 * Gross vehicle weight: 3500 kg * Payload: 2620 kg * Internal dimensions: L: 330 cm, W: 180 cm, H: 30 cm * External dimensions: L: 479 cm, W: 186 cm, H: 980 cm * Loading height: approx. 63 cm * Floor: Steel sheet * Lashing points: 6 per side * Side boards: Aluminum * Frame: Welded steel frame, hot-dip galvanized * Electrical system: 13-pin, 12V * Tires: 195/50R13 * Axle manufacturer: KNOTT * Number of axles: 2 * Braked axle * Support wheel: standard * Pump: Combination pump plus vehicle registration document: €49.99 All prices include VAT. Illustrations may not correspond to the standard equipment; technical changes (e.g., tire sizes) are subject to change. Delivery: Delivery by freight forwarder is possible, at €1.50 per transport kilometer one-way across Germany (from Seesen to the destination), with a minimum of €270.00 plus VAT. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. Here, too, you can obtain your desired trailer and accessories upon request: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Djdpfx Aethlyhok Tskt Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. FINANCING OR LEASING POSSIBLE

Condition: new, functionality: fully functional, empty load weight: 835 kg, maximum load weight: 2,165 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, tire size: 185R14C, Year of construction: 2025, Three-way tipper UDK 3017-30-14 Spinlock®, 350 mm drop sides with corner lever locks, rear drop side with steel paneling, electric hydraulics with emergency "Pumpless" pump, integrated ramp compartment incl. foldable license plate holder, maintenance support. Internal body dimensions: 3,060 × 1,750 × 350 mm Loading height: 750 mm Payload: 2,160 kg Tyres: 185 R14C 8PR Chassis Torsion-resistant longitudinal chassis frame (continuous from the coupling device to the rear lamp bracket) for superior tracking stability. Enclosed, fully welded and hot-dip galvanized steel frame profile for optimum durability. Integrated ramp compartment with tensioning device and foldable license plate holder for secure and elegant storage of ramps under the loading platform. Dedpfx Aexc Eh Aok Tjkt Supplied with maintenance support to secure the tilted bed during servicing. Jockey Wheel Reinforced automatic jockey wheel, mounted on a separate crossmember, with a load capacity of 500 kg for safe parking of the trailer. Manoeuvring handle with practical ratchet strap winder for easy handling. Load Platform & Bed Continuous heavy-duty steel floor across the full vehicle width. Bed with maximum number of crossmembers for superior point load capacity. Load Securing Patented Spinlock load securing system for greater flexibility and efficiency, DEKRA certified. 10 recessed lashing pins symmetrically distributed in the steel floor. Lashing pins above and below the platform, each loadable up to 1,500 daN (kg) and rotatable 360°. Pot magnet with key fob for easy removal of lashing pins when the drop side is open. Drop Sides Anodised, fully foldable and removable aluminium drop sides. Galvanized corner lever fasteners with spring-loaded safety catch. Rear drop side with steel paneling, foldable, including slip protection for ramps. 4 plug-in steel corner stanchions for high load capacity and easy loading & mounting of accessories. Hydraulics Protected mounting of the electric hydraulics with battery and high-performance charger for long service life. Pumpless emergency pump incl. matching socket wrench insert for convenient and simple tipping operation using a cordless screwdriver in case of low battery.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 782 kg, maximum load weight: 1,918 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 Three-sided tipper + Integrated aluminum loading ramps + electric tipping control NEW VEHICLE Dkedpfxszxr Smj Ak Tet Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Integrated aluminum loading ramps in the ramp compartment, 2.8t load capacity Electric tipping control 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -35cm side panels -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without bow -High cover 160cm - 200cm More accessories available upon request! plus freight to Gera and vehicle registration certificate 250 € net Pictures are for example purposes only and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. A wide selection of rental trailers can be found with us. Visit us online or come by!

Condition: new, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 400 mm, KP3532 THREE-WAY TIPPER, ELECTRIC AND MANUAL PUMP * Trailer type: KP3532 THREE-WAY TIPPER, ELECTRIC AND MANUAL PUMP * Gross vehicle weight: 3500 kg * Payload: 2550 kg * Internal dimensions: L: 314 cm, W: 175 cm, H: 40 cm * Loading height: approx. 79 cm * Floor: completely made of steel sheet * Tie-down points: recessed in the frame and mounted on the outside of the frame * Side walls: aluminum * Frame: hot-dip galvanized * Tires: 13 inches Dodpfethl Szex Ak Tjkt * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axle * Support wheel: standard automatic support wheel * Overrun brake and wheel brake: AL-KO * Ball hitch coupling * Pump: electric and manual pump * Side wall latches: made of steel Plus vehicle registration document: €49.99 All prices include VAT. Delivery: Delivery by freight forwarder is possible, €1.50 per transport kilometer, one-way distance (Seesen to destination), minimum €270.00 plus VAT. Visit us also at: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. You can also obtain your desired trailer and accessories here, by arrangement: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel. =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=., FINANCING OR LEASING POSSIBLE Illustrations may not correspond to the standard equipment; technical changes (e.g. tire sizes) are reserved.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-4, empty load weight: 796 kg, maximum load weight: 2,704 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K3 306 170 3500 2E Three-sided tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading platform height: 75cm Total weight: 3500kg Payload: 2702kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg lashing force Reinforced 13" C-type tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Electric tipping control with connector for charging the 12V battery Electric limitation of the tipping angle to the side U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side boards (price reduction) Dedpfx Ajghpc Tsk Tskt - Black Edition (Powder-coated side boards and rims in black) - Integrated ramps 2800kg - 35cm side boards - Charger - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work when the vehicle is tilted - Folding crank rear supports - Complete LED lighting - Anti-theft device - Net with fine or coarse mesh - H-frame - Leaf grid in various heights, also closed - Extension side boards 30cm with tensioning latch - Flat cover with or without bows - High cover 160cm - 200cm Further accessories on request! Plus freight to Gera and vehicle registration document 250 € net Pictures are for illustration purposes only and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by!

Condition: used, maximum load weight: 7,800 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 09/2019, MÜNZ Tandem 3-way tipper with a drive-over rear wall, type TDAK 10.5 Frame and tipping platform hot-dip galvanized Dedpfxozurc Rj Ak Tekt Platform: 4,500 mm x 2,420 mm Recessed tie-down points in the floor Drive-over rear wall 800 mm, easy loading of construction machinery without the need for loading ramps Drawbar with adjustable height Swivel drawbar eye Trailer is immediately available – other new and used tandem 3-way tippers are immediately available from stock.

Condition: new, empty load weight: 1,015 kg, maximum load weight: 2,485 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,630 mm, loading space width: 1,855 mm, loading space height: 350 mm, Year of construction: 2025, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Humbaur HTK 3500.37 Three-way Tipper Car Trailer Condition: New (Production year: 2025) 2 years main inspection from date of first registration Including registration documents (vehicle registration certificate / registration certificate part 2 and COC) Available from: Approx. 6 weeks after order receipt (non-binding) Financing available through our partner banks! Technical Specifications Permissible total weight: 3,500 kg Unladen weight: approx. 1,015 kg Payload: approx. 2,485 kg Number of axles: 2 Load area length: 3,630 mm Load area width: 1,855 mm Load area height: 350 mm Brake type: Braked, overrun brake Chassis: Platform trailer (wheels under the body), rubber suspension axles Electrics: 12V, 13-pin plug Tyre size: 195/50 R13 Special Equipment None Equipment Tipping function via hydraulic pump (electric / electric pump) Emergency hydraulic pump (mechanical / hand pump) Ramp compartments Steel floor plate Aluminium drop sides Drop sides foldable and removable Rear drop side as standard or pendulum tailgate Automatic jockey wheel Lashing eyes Frame welded and galvanized Dedsw Tn Aropfx Ak Tskt V-drawbar AL-KO or Knott axles and brake system Accessories (optional, for extra charge) 100 km/h certification including retrofit of 4x shock absorbers Aluminium loading ramps Aluminium sheet extensions 60 cm Aluminium drop side extension 35 cm or 60 cm Aluminium rims Silver / Black Parking supports Trailer net Trailer lock Bluetooth receiver for electric pump Flat tarpaulin H-frame Height-adjustable drawbar Mesh side extension 60 cm or 100 cm Tarpaulin and hoops 180 cm or 200 cm Wheel set 185 R14C Spare wheel 195/50 R13 incl. holder Tractor connection for hydraulic pump Lashing strap Steel drop side extension 35 cm Nationwide vehicle delivery (Germany) Nationwide registration (Germany) Transit number plates (valid for 5 days) Note Weights may vary depending on equipment. Errors, prior sale and changes reserved! Condition, roadworthiness: Ready to drive; warranty: Manufacturer vehicle warranty.

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: Dsdoq Euagspfx Ak Tokt * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural tractors * LED tail lights ----General components: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box on the side, right * 2-step step on the left side in the direction of travel at the front * Underrun protection, bolted * Plastic fender ----Tipping body: * Lashing hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side board spring lifts, tailgate foldable and pivoting via manual central locking) * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5-ton lashing point in each corner * As well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber and chain tracks * Lockable storage compartment at the rear below the loading area, integrated into the chassis ----Tires: * Tire size 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports, and rear frame hot-dip galvanized * Axles, springs, air tank, flange coupling, and support winch painted in a black tone * Painting of the side boards in RAL - 9010 pure white ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lift and lowering system, including RtR valve and manual lowering for loading processes ----Drawbar / Flange Drawbar Eye: * Drawbar with force-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Support winch at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Three-way tipper platform made of high-strength steel with high M-Strong side boards and reinforced 180 bar tipping cylinder * Fixed smooth sheet steel front wall * Hardwood pad for excavator bucket, bolted to front wall * Continuous side walls (no central stanchion), foldable with board spring lift and swiveling via manual central locking * Rear stanchions bolted * Combination steel tailgate—2-winged, asymmetrically split, swiveling by 270° and lockable (not foldable), with additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized turning bar lock and central locking. Deactivation function for automatic tailgate opening when tipping backwards with opened tailgate. * 4 mm steel floor plate * Two-step access on front left * Ramp holder at the rear for drive-on ramps ----Load Securing: * Each corner equipped with 1 x 7 t lashing point * Each side equipped with 4 x 3 t recessed lashing rings in the outer frame ----Drive-on Ramps: * Recessed storage compartment in the chassis at the rear for ramps * 1 pair of aluminum drive-on ramps (10 tons/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper platform, underrun protection, and rear folding supports hot-dip galvanized * Side wall paintwork in any RAL color of choice (no special or metallic finishes), color may be changed up to approx. 6 weeks before completion * Axles, air reservoirs, flange drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: Dkedpfx Ajvin Ucek Tet * Available from approx. week 45 / 2026

Condition: used, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 04/2020, Visit our website, where you will find our complete inventory with many more photos and information in several languages. SEL 34 Kröger MUP Earth-moving trailer OVERVIEW First registration: 04/24/2020 Country of registration: Germany Color: Red SPECIFICATIONS Technically permissible total weight (kg): 31,000 Permissible total weight (kg): 31,000 Unladen weight (kg): 10,460 VIN: W09MUP3LSK40106 TIRES AND AXLES Axle configuration: 3 axles Axle 1: 560/60 R 22.5 | Leaf spring suspension | Drum brakes | BPW Axle 2: 560/60 R 22.5 | Leaf spring suspension | Drum brakes | BPW Axle 3: 560/60 R 22.5 | Leaf spring suspension | Drum brakes | BPW VEHICLE DOCUMENTS & INSPECTION Vehicle papers: Germany Registration certificate (Schein) Vehicle title (Brief) Additional documents available upon request for an extra charge. MOT: 01.2028 Our vehicles are sold as is. We invite customers to visit our company to personally inspect the condition of the vehicle. We also offer the option of a test drive. Please note that the batteries supplied with the vehicle are the ones currently installed. If the customer requires new batteries, we will provide pricing information. CONTACTS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Liza Obodynska Ukrainian, Russian, English Dsdszwi Rwjpfx Ak Tskt Jovana Marjanovic Bosnian, German, English j.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 3,05x1,80m 3000kg Dreiseitenkipper +E-Pumpe+Nothandpumpe+niedriges Fahrwerk, empty load weight: 837 kg, maximum load weight: 2,163 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, Equipment: tail-lift, uploader, Installed Accessories: - Electric pump including emergency hand pump - Loading ramp kit (ramp housing, two aluminum ramps, two crank supports) Hydraulics (tipping and lowering system): - Electric three-way tipper - Tipping angle, rear: 51 degrees, side: 45 degrees - Large, 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump - 12V battery and hydraulic unit protected in a steel box - Detachable tipping control unit with long spiral cable - 3-phase charge level indicator on the tipping control unit - 7-pin socket mounted on the trailer with charging cable Loading Ramp Kit: - Integrated ramp housing in the frame, behind the license plate - Two reinforced aluminum loading ramps, 2.50 m long, with anti-slip protection - Two stable crank supports, foldable via a pull mechanism - One hand crank with bracket Djdpsh Ewuxjfx Ak Tjkt Sideboards, railing, etc.: - Additional sideboard hinges for greater stability and pressure resistance - Three hinges at the front and five on the sides - Double-walled, anodized aluminum sideboards, 30 cm high - Sideboards that can be folded down and removed on all sides - Corner posts inserted - Quick conversion to a platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Attachment option for tarpaulins and nets: - New sideboard hinges including attachment option for, among other things, a cargo net Chassis and frame: - Chassis completely welded and hot-dip galvanized - Tipper platform completely welded and hot-dip galvanized - Bolted V-drawbar - U-profile on the rear for easier placement of the loading ramps - Low chassis, tire size 195/50R13C - Tow ball coupling with safety indicator - Height-adjustable Hapert automatic jockey wheel with hardened roller Loading area and floor: - Zinc-plated steel plate attached to the multiplex floor - Sendzimir steel sheet, 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-layer, waterproof press-glued - 15 mm thick Lighting: - Modern multi-function lighting - With rear fog lamp - With reversing light - With LED marker lights at the front - 13-pin plug Wheels and axles: - Robust rubber suspension axle - With reversing automatic - Maintenance-free compact wheel bearings - Impact-resistant plastic fenders - Equipped with splash guards - Wheel chocks with bracket Lashing and securing options: - TÜV-tested cargo securing system from HAPERT - 6 recessed mounting brackets integrated into the frame according to DIN standard, with 1000 dAN (kg) per eyelet - Additional recessed mounting brackets integrated into the frame can be retrofitted Documents and shipping costs: - Shipping costs to us are already included - Incl. vehicle registration document (registration certificate part 2) - Incl. COC document (EC certificate of conformity) - No further unwanted costs - Weight reduction possible for an extra charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link to this directly, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Errors, changes and prior sale are subject to change.

Condition: new, functionality: fully functional, empty load weight: 1,016 kg, maximum load weight: 3,500 kg, overall weight: 2,484 kg, loading space length: 3,640 mm, loading space width: 1,700 mm, Year of construction: 2026, ✅ Immediately available ✅ Price incl. VAT ✅ BRAND NEW ✅ Europe-wide delivery possible ✅ Scope of delivery: 1x Martz Tri-Axle Tipper Trailer with mesh side extension and aluminium side panels 364x170cm 3500kg Description: The Martz three-way tipper trailer is the ideal solution for transporting a wide variety of materials. With a generous loading area of 364x170cm and a gross vehicle weight of 3,500kg, this trailer offers maximum flexibility and load capacity. The durable, welded construction from hot-dip galvanized steel guarantees stability and a long service life. Features: - Tipping system: Equipped with both hand and electric pump as well as a telescopic ram for three-way tipping. - Versatility: All side panels can be fully opened or removed, converting the trailer into a flatbed. - Robust build: Welded steel chassis and aluminium side panels ensure high stability. - Lashing rings: Integrated and recessed into the loading deck - Mesh side extension: Exceptionally high mesh extension allows you to transport even more material! The side extension can be opened in seconds on all four sides using quick-release fasteners. Technical data: - V-drawbar - Automatic jockey wheel - Overrun brake - Wheel chocks incl. holder - Rubber suspension axle from Knott or Al-Ko - Electric and manual pump - Mesh side extension Dksdsyi A Twspfx Ak Tot Number of axles: 2 Tippable: Yes Gross weight: 3,500 kg Loading bed length: 3,640 mm Loading bed width: 1,700 mm Overall width: 1,860 mm Overall length: 5,300 mm Trailer height: 1,126 mm Height of mesh extension: 630 mm Total height: 1,756 mm Side panel height: 300 mm Unladen weight: 1,016 kg (+ mesh extension) Payload: 2,484 kg (- mesh extension) Frame type: Welded Side panel material: Aluminium Chassis material: Steel Floor material: Steel Experience the versatility and reliability of the Martz three-way tipper – your partner for demanding transport tasks! On request, we are happy to provide a customized quotation for additional accessories, such as support legs, ramps, and much more. ✅ Price incl. VAT ✅ Immediately available ✅ Inspection and sales Mon-Fri: 9 am - 7 pm Sat: 9 am - 2 pm

Condition: used, maximum load weight: 8,470 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 06/2018, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,800 kg Unladen weight: 3,330 kg Payload: 8,470 kg Overall length: 6,950 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,420 mm Loading height: approx. 950 mm Further information: - Front support leg Dkjdoy Arkajpfx Ak Tst - Rear support, foldable - 450 mm drop sides - Large lashing package - Frame hot-dip galvanized incl. passivation - Loading ramps optional: €1,280.00

Condition: used, empty load weight: 4,150 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 10/2018, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, EBS Disc brakes Color: green / silver Payload: 14,850 kg Air lift suspension Side aluminium swinging and folding drop sides with spring assist Dkodjxxvktepfx Ak Tjt Rear swinging steel tailboard Sliding tarpaulin cover Folding platform 5 pairs of lashing rings BPW axles Alcoa aluminium rims Folding underrun protection Toolbox Errors excepted