Used Three-Way Tipper Trailers for sale (487)

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (range 300 mm) with 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approximately 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of high-tensile fine-grained steel ----Tipping Platform: Rsdpotr St Uefx Abnju * Mesh hooks on the sides and rear at the central locking mounts, plus 2 hooks on the front wall * 2-way steel pallet tipper body with fixed smooth sheet metal front wall, continuous drop sides – foldable without center posts with board lifting springs, and swinging via manual central locking * Rear posts bolted * Steel rear wall inserted in front of the ramps * Each corner with 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor made of high-tensile fine-grained steel ----Ramps: * Two-part mechanical mesh drive-up ramps with aluminum tip section, 2,150 + 1,300 mm x 600 mm (can be manually slid together to 80 mm) ----Paintwork: * Chassis, drawbar, rear posts, underrun protection, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black * Sideboards and platform in RAL 9010 pure white * Paintwork of sidewalls and tipping platform in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 07/2026

Condition: new, maximum load weight: 2,555 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total width: 1,930 mm, total height: 1,860 mm, Year of construction: 2026, Humbaur Three-Way Tipper with Electric Pump, Black Steel Side Walls 350 mm, and Aluminum Sheet Extension 600 mm - HTK 3500.31 Our Special Price – €9,350 incl. 19% VAT, incl. 6.4% delivery fee, incl. registration documentation! Description: The HTK three-way tipper not only impresses with our renowned high-quality standards. It comes equipped with a convenient hand pump, which can be upgraded to an electric hydraulic pump at any time if required. For models starting at a permissible gross weight of 3,000 kg, both electric and hand pumps are standard features. This makes unloading your cargo effortless! Technical Data: * Trailer type: Tandem axle * Construction: Aluminum * Rear tipping angle: 45° * Three-way tipping angle: 45° * Unladen weight: 945 kg * Gross weight: 3,500 kg * Payload: 2,555 kg * Internal length: 3,140 mm * Total length: 4,500 mm * Internal width: 1,750 mm * Total width: 1,930 mm * Internal height: 350 mm + 600 mm aluminum sheet extension * Total height: 1,260 mm + 600 mm aluminum sheet extension * Loading height: 760 mm * Tire size: 13 inches Standard Features: * V-drawbar, fully hot-dip galvanized * Chassis and tipping bridge, fully hot-dip galvanized * One-piece steel tipping bridge * Hand pump, with optional electric hydraulic pump from 3,000 kg gross weight (electric and hand pump standard) * Humbaur multifunction lighting Redpfxoy Swv Hj Abnju * Removable, anodized aluminum side panels * Rear gate with swinging function * Lashing rings mounted in the bed, 800 kg pull force each * Support wheel * Recess prepared for aluminum loading ramps for easy retrofit

Condition: used, maximum load weight: 13,850 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/1995, next inspection (TÜV): 05/2026, Year of construction: 1995, Equipment: ABS, Fully operational Rjdpfx Aey Dmupobneu

Condition: used, maximum load weight: 13,190 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2001, next inspection (TÜV): 01/2026, loading space length: 6,600 mm, loading space width: 2,460 mm, loading space height: 1,100 mm, Year of construction: 2001, Equipment: ABS, Excellent condition, ready for immediate use Rjdpfeym H Itox Abnsu

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange drawbar eye Rjdpfx Asl Th Htebneu ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber taillights ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of chassis * Bolted underrun protection * Plastic quarter mudguards * Net hooks located at each central locking bearing and two at the front wall ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Steel pallet 3-way tipper body with continuous side walls, upper internal tube reinforcement, fold-down without centre posts, with drop side spring lift assist * Rear corner posts bolted * Combination steel wing-door rear wall, 2-leaf, asymmetrical split, can be swung and locked up to 270°, not foldable, equipped with additional swing frame for automatic rear wall opening when tipping. Locking via galvanised rotary latch at rear and central locking. Deactivation function for the automatic rear wall operation when tipping backwards with one leaf open. * 4 mm floor plate made of fine-grain steel * Rear guide rail for loading ramps ----Load Securing: * One 5 t lashing ring fitted in each corner, plus four 3 t lashing points recessed into the outer frame on each side ----Ramps: * One pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable compartment at the rear, recessed below the loading floor in the chassis, for the ramps ----Tyres: * Tyres 285/70 R 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear posts, rear folding supports hot-dip galvanised * Axles, springs, air tanks, and landing gear painted in black tone * Drop side panels painted in RAL 9010 pure white * Side walls paintable in any RAL colour (at extra charge) ----Info: * Reinforced structure with load securing certificate * Vehicle has a daily registration (unused) * Errors and prior sale excepted ----Delivery Time: Immediately available ex Egestorf

Condition: used, maximum load weight: 12,720 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2021, next inspection (TÜV): 06/2026, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 1,000 mm, loading space volume: 11 m³, Equipment: ABS, * 9003 - Vehicle ID for telephone inquiries * SAF axles, air suspension, foldable underrun protection, platform, sliding tarp, towing eye Ø 50 mm * 3-way tipper, Bordmatik system on the left, 4 recessed lashing rings in the floor * Top condition! * Tires 385/65R22.5 (12 mm) ----Our email address: Rodpfxjyca Ulo Abneu     Our service for you:       - Procurement of temporary or customs license plates       - EU-wide transfer / delivery       - Customs clearance for export to third countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Condition: used, maximum load weight: 13,443 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2017, next inspection (TÜV): 06/2028, Year of construction: 2017, Internal vehicle no.: MK200155 Redpfx Abjycaq Tenou German vehicle Available immediately at our yard in Kaufungen - Kassel More info: Luis Lucena Unladen weight: 4,557 kg Max. permissible weight: 18,000 kg Errors excepted We are happy to accept your used vehicle as part exchange. Financing possible directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, empty load weight: 1,185 kg, maximum load weight: 2,315 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 350 mm, Year of construction: 2026, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Humbaur HTK 3500.41 Three-way tipper trailer Car trailer Condition: New (Year of manufacture: 2026) 2 years main inspection (TÜV) from the date of first registration Including registration documents (vehicle registration certificate Part II and COC paper) Available: Immediately (in stock)! Financing possible through our partner banks! Technical Data Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,185 kg Payload: approx. 2,315 kg Number of axles: 2 Loading area length: 4,100 mm Loading area width: 2,100 mm Loading area height: 350 mm Brake type: Braked, overrun brake Chassis: High loader (wheels under the platform), rubber suspension axles Electrics: 12V, 13-pin plug Tyre size: 185 R14C Special Equipment Wheel set 185 R14C Steel side panels, black Features Tipping function via hydraulic pump (electric/electric pump) Emergency hydraulic pump (mechanical/hand pump) Ramp compartments Rodjuchkrspfx Abnsu Steel floor plate Drop sides foldable and removable Rear drop side as standard or pendulum flap Automatic jockey wheel Lashing rings Welded and galvanized frame V-drawbar AL-KO or Knott axles and brake system Optional Accessories (at extra cost) 100 km/h certification including retrofitting of 4x shock absorbers Aluminium loading ramps Aluminium side extension 60 cm Divided aluminium side panels 35 cm Aluminium side panel extensions 35 cm or 60 cm Aluminium rims silver/black Support legs Trailer net Trailer lock Bluetooth receiver for electric pump Flat tarpaulin H-frame Height-adjustable drawbar Mesh side extension 60 cm or 100 cm Wheel set 195/50 R13 Spare wheel 185 R14C incl. holder Tractor connection for hydraulic pump Lashing strap Steel side panel extension 35 cm Nationwide vehicle delivery (Germany) Nationwide registration (Germany) Transit plates (valid 5 days) Note Weights may vary depending on equipment. Errors, prior sale and changes excepted! Condition, roadworthiness: roadworthy, Warranty: Manufacturer's vehicle warranty

Condition: used, overall weight: 1,800 kg, axle configuration: 2 axles, first registration: 09/2007, Equipment: ABS, Visit our website, where you’ll find our complete range of vehicles with many more photos and information in several languages. Rsdjy Rwwuopfx Abnou SEL 8442 Kempf HK 18 Grain German registration / 1st owner First registration: 07.09.2007 Permissible total weight (kg): 18,000 Technical total weight (kg): 18,000 Unladen weight (kg): 4,600 VIN: W090202187MK42191 Technical inspection (HU): 07.2026 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 2 axles / BPW Air suspension Disc brakes BODY: Internal dimensions: Height (m): 2.03 (1.83) Width (m): 2.42 Length (m): 7.22 OTHER SPECIFICATIONS: Drawbar eye: 40 mm TIPPER: Tipper cover For grain Work platform with anti-slip flooring VEHICLE DOCUMENTS: Registration certificate part I (Schein) Registration certificate part II (Brief) M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian, Russian) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN. Although every effort is made to ensure the accuracy of the information, we cannot be held responsible for mistakes or omissions. We kindly ask our customers to refer to the available photos. The stated dimensions are approximate values. Our vehicles are sold in the actual condition as seen. We invite customers to visit our company to inspect the vehicle personally. Test drives are available by arrangement. Please note that the vehicle is delivered with the currently installed batteries. If you require new batteries, we are happy to provide price information.

Condition: new, maximum load weight: 2,120 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total width: 1,930 mm, total height: 1,860 mm, Year of construction: 2026, Humbaur Three-Way Tipper with Electric Pump and 600mm Mesh Extension - HTK 3000.31 Available from week 23 Our price: €7,900 incl. 19% VAT, 6.4% delivery/hand-over fee and registration documents Description: The HTK three-way tipper stands out not only for our consistently high-quality standards. It comes equipped with a practical hand pump, which can be upgraded to an electric hydraulic pump at any time if required. From a permissible gross weight of 3,000 kg, both the electric and hand pumps are fitted as standard in the trailer. This makes unloading your cargo effortless. Technical data: * Trailer type: tandem axle * Construction: aluminium * Rear tipping angle: 45° * Three-way tipping angle: 45° * Unladen weight: 880 kg * Gross vehicle weight: 3,000 kg * Payload: 2,120 kg * Internal length: 3,140 mm * Overall length: 4,500 mm * Internal width: 1,750 mm * Overall width: 1,930 mm * Internal height: 350 mm + 600 mm steel mesh extension * Overall height: 1,260 mm + 600 mm steel mesh extension * Load height: 745 mm * Tyres: 13 inch Standard equipment: * V-shaped drawbar, hot-dip galvanised * Chassis and tipping bridge hot-dip galvanised Rsdsyw Eh Ijpfx Abneu * Tipping bridge made of a single piece of steel * Hand pump, electric hydraulic pump optional (from 3,000 kg gross weight: electric and hand pump standard) * Humbaur multifunctional lighting * Side panels made of anodised aluminium, fully removable * Rear tailgate with pendulum function * Lashing rings mounted in deck, lashing force 800 kg per ring * Jockey wheel * Plank recess prepared for easy retrofitting of aluminium planks

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at Rodpfxswz H Nbj Abnju We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: new, maximum load weight: 2,240 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 350 mm, total width: 2,280 mm, total height: 1,240 mm, Year of construction: 2026, * Humbaur HTK 3500.41 Parabolic Suspension * Three-way Tipper * New vehicle * Year of manufacture: 2025 * Gross vehicle weight: 3500 kg * Unladen weight: 1185 kg * Payload: 2240 kg * Loading height: 760 mm * Overall dimensions: 5712 mm x 2280 mm x 1240 mm * Internal dimensions: 4100 mm x 2100 mm x 350 mm * Drop sides made of anodized aluminum, fully removable * Rear flap can be used as a swinging tailgate * Chassis and tipping bridge hot-dip galvanized * Tipping bridge made of steel * Electric pump combined with emergency hand pump * Multifunctional lighting integrated in underride guard * 8 tie-down rings mounted in the platform floor * Lashing capacity 800 kg per tie-down ring * Pre-installed plank compartment * Automatic jockey wheel * V-drawbar * Plank compartment prepared for easy retrofitting of aluminum ramps * Optional extras: * Headboard rack * Steel mesh extension 620 mm * Aluminum plate extension 620 mm * Additional side wall extension 350 mm * Steel side wall extension 350 mm * Side wall extension 600 mm * Toolbox * Aluminum ramps with 2.8 ton load capacity Redot Dudispfx Abnju * Telescopic wind-down supports * Flat cover, color of your choice ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! The specified internal dimensions are approximate values. For new vehicles, additional freight and document costs may apply. The seller is not liable for mistakes, input errors, or data transmission errors. Subject to change and prior sale! TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE DEALS AND ADDITIONAL PAYMENTS POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 1,750 mm, total width: 1,930 mm, total height: 2,660 mm, Year of construction: 2026, * Humbaur HTK 3500.31 * Flatbed trailer * 3-way tipper * NEW * Removable side extensions * Year of manufacture: 2025 * Gross weight: 3,500 kg * Payload: 2,550 kg * Unladen weight: 950 kg * Overall dimensions: 4,500 mm x 1,930 mm x 2,660 mm * Internal dimensions: 3,140 mm x 1,750 mm x 1,750 mm * Loading height: 760 mm * V-shaped drawbar * Chassis and tipping bed hot-dip galvanized * Tipping bed made of steel * Electric pump * Humbaur multifunctional lighting * Steel sidewalls, fully removable * Rear tailgate, swinging * Lashing rings set in the platform floor (tensile strength 800 kg) * Automatic jockey wheel * Plank compartment * 13-pin connector Upon request, the number of side extensions can be increased or reduced. HTK 2700.31 6,399 EUR HTK 2700.31 with electric pump 6,999 EUR HTK 3000.31 7,199 EUR HTK 3500.31 7,799 EUR Optional accessories: - Aluminum side extension 350 mm for HTK..31 950 EUR - Aluminum side extension 600 mm, swinging 1,850 EUR - Steel mesh extension 600 mm for HTK..31 999 EUR - Aluminum sheet extension 600 mm for HTK..31 1,549 EUR Rsdpfx Asm Tg Uhsbnsu - Steel mesh extension 1,000 mm for HTK..31 1,800 EUR ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right of prior sale, as this item is also advertised on other platforms. We strongly recommend inspection and examination, so that there is no misunderstanding regarding the condition and suitability by the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for illustration purposes and may include chargeable accessories. The stated internal dimensions are approximate measurements. For new vehicles, additional costs for shipping and paperwork may be incurred. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGE DEALS AND ADDITIONAL PAYMENTS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 2,490 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,740 mm, loading space height: 400 mm, total width: 1,910 mm, total height: 1,260 mm, Year of construction: 2026, * Humbaur HTK 3500.31 * Three-way tipper * New vehicle * Year of manufacture: 2025 * Gross weight: 3500 kg * Payload: 2550 kg * Overall dimensions: 4500 mm x 1900 mm x 1260 mm * Internal dimensions: 3140 mm x 1750 mm x 350 mm * Electric pump combined with emergency hand pump * Fuhrmann-profile drop sides made of galvanized steel sheet, fully removable * V-drawbar, hot-dip galvanized * Tipping platform made of steel, manufactured from a single piece * Chassis, tipping platform, and sides hot-dip galvanized via immersion Redpfx Aeuknrgsbneu * Humbaur multifunctional lighting * 13-pin plug and reversing light * Rear gate with swing function * Tie-down rings mounted in the platform floor, tensile strength 800 kg per ring * Prepared recess for simple retrofitting of aluminum ramps * Support wheel Including 19% VAT ATTENTION !!!!! PLEASE READ CAREFULLY!!!!! The stated internal dimensions are approximate values. For new vehicles, additional costs for freight and documentation may apply. The seller is not liable for mistakes, input errors, or transmission errors. Subject to changes and prior sale! All details are non-binding descriptions and do not constitute guaranteed characteristics. This listing serves solely as a preview of our vehicle and does not form any part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGES AND SURCHARGES POSSIBLE!!! Display location: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,750 mm, loading space height: 345 mm, total width: 2,010 mm, total height: 680 mm, A40 NG000588, Three-way tipper trailer with tandem axle, manufacturer STEMA, model TRIUS SHDK .2 Zink-BW, gross weight: 3,500 kg, high-loader, hydraulically tiltable with electric pump, rear pendulum tailgate, 3.01 m x 1.83 m. 3,500 kg, overrun braked, high-loader, electric pump, aluminum paneling, rear pendulum side panel. Errors and prior sale excepted, vehicle not prepared. Redpfxsyn Uhks Abnou

Condition: used, maximum load weight: 2,564 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 01/2024, loading space length: 3,015 mm, loading space width: 1,850 mm, loading space height: 345 mm, total width: 4,049 mm, total height: 2,015 mm, A4 Gw26GA00043 Rjdjym Ihuepfx Abnju 3,500 kg, inertia-braked, high-bed trailer, electric pump, aluminium cladding, rear pendulum tailgate. Subject to errors and prior sale, vehicle not prepared.

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 14.4 ----Brake system: * Wabco EBS * Emergency release device for spring actuators * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange drawbar eye: * Height adjustable hot-dip galvanized drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical support winch at the front * Two mechanical hot-dip galvanized foldable support legs at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel on right side * Plastic quarter mudguards * Two-step entry on the left side for access assistance ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights ----Tipping body: * Steel 3-way tipping platform for pallets * Continuous side walls at the top with internal tubular reinforcement - without center posts - foldable with drop-side spring assist * Rear flap foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Mesh hooks, rear mounting rail for loading ramps * Preparation for subsequent installation of drop side extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings recessed in the outer frame on each side ----ALU Loading Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment from the rear, integrated under the loading area in the chassis ----Tyres: * Tyres 385/55 R 22.5 Rjdpev Dz N Nsfx Abnou ----Paintwork: * Axles, springs, air tanks, and support winch painted in black * Chassis, drawbar, floor, front wall, foldable supports hot-dip galvanized * Side walls painted in customer's RAL color of choice (no special or metallic paint) - color may be changed up to approx. 6 weeks before completion ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with factory warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29 / 2026

Condition: new, empty load weight: 1,000 kg, maximum load weight: 2,500 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,510 mm, loading space width: 1,850 mm, loading space height: 300 mm, Year of construction: 2025, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Henra KP353518 Three-way tipper Passenger car trailer Condition: New (year of manufacture: 2025) 2 years main inspection from date of first registration Including registration documents (vehicle registration certificate part II and COC) Available from: Immediately (in stock)! Financing possible through our partner banks! Technical specifications Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,000 kg Payload: approx. 2,500 kg Number of axles: 2 Cargo area length: 3,510 mm Cargo area width: 1,850 mm Cargo area height: 300 mm Brake type: Braked, overrun brake Chassis: High-loader (wheels under body), rubber suspension axles Electrics: 12V, 13-pin plug Tyre size: 185/60 R12 Special equipment Emergency hydraulic pump (mechanical / hand pump) Rear light protection Heavy-duty jockey wheel Features Ramp compartments Tipping function via hydraulic pump (electric / electric pump) Fully welded chassis Hot-dip galvanized chassis Aluminium side walls Lashing eyes Rope hooks Steel plate on wooden floor Side walls foldable and removable V-drawbar AL-KO or Knott axles and braking system Accessories (at extra cost) Aluminium side walls 40 cm high Trailer net Loading ramps (steel or aluminium) Extension side walls 30 cm or 40 cm with tension locks Black Label (aluminium side walls in black) Leaf springs incl. shock absorbers Flat tarpaulin (grey, other colours possible) H-frame Rear support legs Battery charger Mesh sides 60 cm LED lighting Pendulum tailgate Tarpaulin and bows 160 cm, 190 cm or 220 cm (grey, other colours possible) Shock absorbers (100 km/h approval) Rjdjwuwprspfx Abneu Trailer lock Lashing straps Nationwide delivery in Germany Nationwide registration in Germany Export number plates (valid for 5 days) Notes Weights may vary depending on equipment. Errors, prior sale and changes excepted! Condition, roadworthiness: roadworthy, Warranty: Manufacturer's vehicle warranty

Condition: new, empty load weight: 840 kg, maximum load weight: 2,140 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50 R13 C, Tandem high-loading three-way tipper, Manufacturer: Hapert, Model: Cobalt HM-2, Internal dimensions approx. (LxWxH): 3050 x 1800 x 300 mm, Permissible total weight: 3000 kg Equipment: - Chassis with maintenance-free rubber suspension axles - Tyres 195/50 R13 C - Galvanised V-drawbar - Overrun brake with automatic reversing mechanism and ball coupling - Automatic jockey wheel, solid rubber, with metal rim (load capacity 500 kg) - 12V lighting system with 13-pin connector - Stable frame made from high-quality steel profile, fully hot-dip galvanised - Floor made from multiplex board with galvanised steel sheet cover - Hydraulic three-way tipping system with electric pump - Side boards made from anodised aluminium profile, approx. ... mm high - All side boards foldable and removable - Robust recessed tension latches Rjdpfey Ru A Isx Abnju - 4 corner stanchions with bows socket - Recessed tie-down rings mounted in floor frame profile Accessories: - Emergency hand pump for electric pump, €185.00 plus VAT - Channel for loading ramps under the loading platform, €115.50 plus VAT (Images may show optional equipment subject to surcharge! Errors and technical changes excepted!)

Condition: new, maximum load weight: 13,410 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * 2 x 9 t Gigant axles * Air suspension with level control during tipping operations * Drawbar with 50 mm flange towing eye (adjustable +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Folding galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective hood * 2 LED reversing lights * Chassis made of high-tensile steel * Steel 3-side tipper body (side walls with MM profile – seamless without central stanchion – pendulum-mounted via manual central locking, and left side folding down with drop side spring assist) * Sliding tarpaulin similar to RAL 7038 agate grey with tarpaulin tensioning using side ratchet tensioners and front/rear elastic cords * Front wall platform made of grating with step at drawbar and handhold at front wall * Rear wall – made of HBW 400 steel – pendulum-mounted with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 t recessed and foldable lashing rings per side, embedded in steel floor * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * Side wall painting in any desired RAL color (excluding special or metallic finishes), changeable up to approx. 6 weeks before completion * Axles, air reservoirs, landing gear, and flange towing eye painted in a shade of black * Chassis, underrun protection, and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available approx. from week 44 / 2026 Rjdpfx Abjxl Nkgsnsu

Condition: new, maximum load weight: 13,830 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (Electronic Braking System with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with automatic level control during tipping operation ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal – without truck-side installation * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar / Drawbar Eye: * Drawbar with 50 mm flange-type drawbar eye (adjustable by +77 mm and -33 mm using an offset plate) ----General Add-on Parts: * Landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Front wall platform made of grating with access step at the drawbar and handrails on the front wall Rjdpfsx Ipbyox Abnju ----Chassis: * Chassis made of high-tensile steel ----Tipper Body: * Steel three-way tipping body with asymmetrical continuous aluminum side walls (without central stanchion) – pendulum-mounted via manual central locking and folding on the left side with drop-side spring balancer * Rear wall made of HBW 400 steel – pendulum-mounted with automatic 2-jaw lock * 5 mm steel floor made of HBW 450 steel ----Load Securing: * 4 each side (total 8) 3 t recessed and foldable lashing rings embedded in the steel floor ----Tarpaulin: * Roll tarpaulin – agate grey similar to RAL 7038 * Tarpaulin tensioning via ratchet tensioners on the sides and tensioning rubber at front and rear ----Painting: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air reservoirs, landing gear, flange drawbar eye painted in black * Side wall painting in a RAL color of your choice (not including special or metallic paints), can be changed up to approx. 6 weeks prior to completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * New vehicle without initial registration with manufacturer’s warranty * Errors and interim sale reserved * Sample images (pictures of the actual vehicle may differ due to optional equipment) ----Delivery time: * Vehicle available from calendar week 42/2026

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural tow vehicles * LED tail lights ----General attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox on right side * Two-step access ladder front left in direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Net hooks on the sides and rear in the locks of the central locking system, as well as 2 on the front wall Rodpfxjq Euage Abneu * Steel pallet three-way tipping body (continuous sidewalls without central stanchions, foldable with sideboard spring lifts, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 t lashing ring at each corner * Plus 4 x 3 t lashing rings on each side recessed in the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (8 t/pair load capacity), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment under rear loading area integrated into the chassis ----Tires: * Tires 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs and tail stakes hot-dip galvanized * Axles, springs, air tanks, flange towing eye and support winch painted in black tone * Sideboard paintwork in desired RAL color (except special or metallic paints), can be changed up to approx. 6 weeks before completion ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images ----Availability: * Available from approx. week 28 / 2026

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal—no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer assembly * Tow bar height-adjustable by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing leg at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolted underrun protection * Plastic quarter mudguards * Tarpaulin hooks at each location of the central locking and 2 additional on the front wall * Chassis made from high-tensile steel * Steel pallet three-way tipper body with reinforced Strong sidewalls (continuous sidewalls on top with internal pipe reinforcement—without center stanchions—drop-down with sidewall spring assists) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically divided—opens and locks up to 270°, not drop-down—with additional swinging frame for automatic tailboard opening during tipping, locking via galvanized rotary bolt lock at the rear and central locking, deactivation function for the automatic rear function when tipping backwards with the wing door open * Each corner fitted with one 5 t lashing point, with four 3 t lashing rings set into the outer frame on each side * 4 mm fine-grain steel floor plate * Rear ramp rails for loading ramps * Reinforced body with load securing certificate * One pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, recessed under the loading area in the chassis for the ramps * Tow bar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing leg painted in black tone * Tires: 358/55 R 19.5 * Sideboard paintwork in a RAL color of your choice (no special or metallic paints), changeable up to approx. 6 weeks before completion * Subject to prior sale and errors excepted * Immediately available from week 29/2026 Rodsx Hm Riopfx Abnju * Sample photos

Condition: new, functionality: fully functional, machine/vehicle number: 12332580, empty load weight: 680 kg, maximum load weight: 1,920 kg, overall weight: 2,600 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,300 kg, permissible axle load (axle 2): 1,300 kg, loading space length: 3,060 mm, loading space width: 1,800 mm, loading space height: 700 mm, total length: 4,400 mm, total width: 1,920 mm, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 1800 mm x 3060 mm External dimensions approx. 1920 mm x 4400 mm Gross vehicle weight: 2600 kg Payload: approx. 1920 kg (Payload may vary depending on optional equipment) Manufacturer: Debon Special features Rsdpfoy I Ufkox Abnju - 3-way tipper "PW2.4E" - Electric hydraulic pump (battery-powered) - Charging contacts in the frame profile (12V / compatible with chargers) - 6 lashing rings in the loading floor - H-frame, galvanized steel (installed / removable) - 350 mm foldable / removable aluminium side panels - 350 mm foldable / removable aluminium side wall extension - Ramp compartment (without ramps; ramps available as optional accessory) - Vehicle documents included Additional equipment - Floor plate: galvanized steel sheet over phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar fully hot-dip galvanized | Rubber suspension axle | V-drawbar with ball coupling | Heavy-duty automatic jockey wheel Electrics - 12 volt | 13-pin connector | Rear fog lamp | Marker lights If you would like to purchase this trailer or have further questions about trailers, please use our internal 3-way tipper trailer "No. 12332580".

Condition: used, maximum load weight: 13,390 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2000, next inspection (TÜV): 10/2026, Schwarzmüller 3-way tipper in good condition ---- Technical specifications: General: * Front axle load: 9,000 kg * Rear axle load: 9,000 kg Cab: * Refrigerator: No Engine: * AdBlue: Yes Transmission: * Retarder: No Chassis: * Suspension: Air suspension * Alloy wheels: No * Lift axle: No * Steering axle: No * Permissible axle load: 9,000 kg Fifth wheel: * Disabled kingpin: No Documents: * Unladen weight: 4,600 kg * MOT/emissions valid until: 10/2026 Redjy Rwpwjpfx Abnsu