Tipper semitrailer

BENALU Agriliner FL 9150, Alu, 52m³, Kombitüren, SAF

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,720 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 52 m³, Equipment: ABS, Aluminum rear tipping trough, approx. 52 cbm, aluminum chassis, combination rear door with double-wing door and rotary bar lock / pendulum flap, pneumatic locking, 2 x grain sliders, load pressure gauge, tarpaulin cover, aluminum landing legs, ABS, EBS, SAF INTRA CD axle(s), aluminum rims, disc brake system, air suspension with lift-lower device, lift axle. The vehicle may be covered with advertising stickers and/or inscriptions. Lsdpfx Ahjxv Nqusbsrr SI86334 Our offer is generally without a new technical inspection (TÜV). If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply. We will be happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized Lrjdjk Af Svepfx Ahbsr -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights Lrsdpfx Ajl Sl Izohbjr A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: excellent (used), first registration: 08/2008, color: green, Year of construction: 2008, Extendable body: Yes Ljdpfx Ajykz Uiohbjrr Technical condition: very good Visual condition: very good

Condition: new, maximum load weight: 32,630 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, SCHWARZMÜLLER 3-Axle GRAIN Tipper Body 57m3 6370kg!! BRAND NEW VEHICLE!! Transport Goods: Bulk materials, pallet, and grain transport Weights: - GVW (technical): 39 t - Aggregate load (technical): 27 t - Kingpin load (technical): 12 t - Unladen weight: 6,370 kg Dimensions: - Internal length: approx. 10,500 mm - Internal width: approx. 2,470 mm - Internal height: approx. 2,200 mm - Loading volume: approx. 57 m³ - Overall height unladen: approx. 3,800 mm Frame: - Steel frame welded construction with rear tipping shaft, - Low build height (frame height approx. 280 mm) - 2" kingpin - Frame for fifth wheel height approx. 1,170 mm - approx. 1,250 mm - Mechanical steel landing gears, 2 x 12 t, single-sided operation on the right, - Load compensation Axles: - SAF Intradisc B9 axles with disc brakes ø430 mm (22.5" disc), - Axle load capacity 9 t/axle, On-road version - Axle spacing 1,310 + 1,310 mm - Front axle liftable = raises/lowers depending on load weight, - Additional forced lowering including integrated low-speed start-up aid, push-button operation in cab + function via “3 x brake” action, socket: PIN 12 Wheels: - 6 tires 385/65 R 22.5, 160K, - 6x aluminum rims 11.75 x 22.5, offset 120 mm, polished, brand per factory choice Brakes / Suspension: - Brake system in accordance with EC Directive 71/320 ECE R13, dual-line air brake system - Brake system manufacturer: Knorr - EBS system 2S2M - RSS - stability program - Spring-actuated parking brake - Aluminum air tanks - Brake/air connectors: 2 coupling heads - EBS/ABS socket at the front - Electronic air suspension with automatic lowering device, inductive switch + lowering lock rotary switch + additional lifting and lowering device, operable from cab via CAN bus signal + display (TIM) on trailer Assistance / Safety Systems: - Axle load display via EBS CAN bus signal for display in the cab - TIM - Trailer Information Module by Knorr, display on chassis - SWIT - Schwarzmüller Intelligent Telematics, "BASIC" package - Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels Tipping Body: - Aluminum corner tipper in pallet version = smooth inside and outside, - Front and rear walls vertical - Front wall 4 mm with reinforcements - Access steps in the body - Side walls hollow profile 30/3/2 mm with upper stabilizing frame - Rear cross beam = door stop beam swivels, incl. actuation rod - Continuous fixed support over front wall and rear cross beam - Floor plate 8 mm with close cross-ribbing - Side walls internally fully welded and sealed - Combination rear wall 4 mm = double door split in the middle with rubber seal, - 1 external stainless steel rotary latch - Door hold-back fixture for opened doors Lredpfxeyv S Nis Ahbsr - Plus pendulum frame with rubber seal, - Automatic-mechanical 4-hook central locking with lock-off option Slide discharge - 1 grain hatch (approx. 400/400 mm) per door leaf - With side dosing lever and splash guard - Slider plate stainless steel, unpainted - Additional joint for free swinging - Tensioning bolts for closure Hydraulics: - Single-pipe hydraulic system with fixed half-screw coupling HDK BG6 - High-pressure front press for rear tipping, tip angle approx. 48 degrees - Plastic rolling tarpaulin incl. aluminum bar, hand crank + holder at standing platform - Cover sheet has central tube ø 60 mm sewn in with piping attachment on top chord (without customs seal) - 3 locking brackets and catch for rolled-up tarp - Front and rear tarp hooks with zig-zag lacing - 4 removabl

Condition: new, empty load weight: 6,400 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, total length: 10,600 mm, total width: 2,410 mm, total height: 2,200 mm, suspension: air, Year of construction: 2025, load capacity: 32,600 kg, • Volume 57.3 m³ • Aluminium rims • Spare wheel carrier • Side tarpaulin • Universal twin rear doors Lrjdpfx Ahex Hkw Tsbor • 2 hatches • Aluminium walkway • Liftable first axle • 4 LED work lights • PVC storage box • Tool holder • Aluminium ladder 3.5 m • Automatic suspension lowering • Towing eye • Coupling height 1170 mm • Floor 6 mm • Side walls 4 mm • Water tank 50L • Internal dimensions: 10.60 x 2.41 x 2.20 m

Condition: new, functionality: fully functional, empty load weight: 6,495 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space volume: 60 m³, total length: 13,060 mm, total width: 2,530 mm, suspension: air, tire size: 385/65, tire condition: 100 %, ground clearance: 4,000 mm, Year of construction: 2026, NEW – AVAILABLE FOR IMMEDIATE DELIVERY Kassbohrer Silo 60 m³ – SSK 60 Silo for the transport of FLOUR, GRAINS, SUGAR, RICE, CEREALS, and PLASTICS Lredpfxjzcaauj Ahbjr Volume: 60 m³ Length: 13,060 mm Unladen weight: 6,495 kg BPW axles, 1st axle liftable 5 manway access points Storz end coupling Aluminum rims Pneumatic railing lifting system Electropolished discharge cone

Condition: used, mileage: 751,628 km, power: 217 kW (295.04 HP), first registration: 08/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * CD radio * Dometic rear view camera system * Multifunction steering wheel * Stationary air conditioning system * Stationary heater ----* Emergency brake assist * Lane keeping assist * Adaptive cruise control * Tire pressure monitoring system * Hill start assist * Leaf-air suspension * Differential lock, rear axle ----* Thermoking T1200R Spectrum refrigeration unit * ThermoKing Telematics & Touch Print control unit Lsdsywq Sropfx Ahbjrr * Last maintenance: 06/2025 at 9841 hours * Bär tail lift BC1500S4 ----* Tire dimension, front axle: 315/70R22.5 * Tire dimension, rear axle: 315/70R22.5 * Fuel tank: 380 liters * AdBlue tank: 65 liters * Technical gross vehicle weight: 18000 kg * Tare weight: 9270 kg * Overall length: 9960 mm * Next inspection due: 03/2026 ----Vehicle number: 11928----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/inspection approval Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport services ----YOUR VTS TEAM

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, loading space volume: 54 m³, Year of construction: 2025, Equipment: ABS, !!FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Approx. 52 m³ Grain Tipping Trailer, Aluminum - Manufacturer: Benalu - Model: Grain Tipping Trailer - Year of Manufacture: NEW VEHICLE - Volume: approx. 54 m³ (9.50 m long x 2.41 m wide x 2.30 m high) - Gross Vehicle Weight: 39,000 kg - Unladen Weight: approx. 5,600 kg - Axles: 3 axles / disc brakes - Tires: 385/65 R22.5 on Speedline aluminum rims - Suspension: Air suspension with raise/lower function - EBS Wabco - Combination door (swing doors and pendulum tailgate) - Pneumatic unlocking of the pendulum tailgate during tipping - 2x grain discharge chutes - 5mm floor - Individual wheel mudguards - Unladen support leg - Folding underrun protection - Load pressure gauge - Operator platform at front Lodpetf Sahjfx Ahbsrr - Rolling tarpaulin - Toolbox German vehicle!! German papers!! FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Images are for reference only!!

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Lsdpfx Ahegcw Riobjrr Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi