Tipper semitrailer

BENALU Agriliner FL 9150, Alu, 52m³, Kombitüren, SAF

Condition: used, empty load weight: 6,227 kg, maximum load weight: 29,773 kg, overall weight: 36,000 kg, first registration: 09/2024, loading space length: 10,540 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 54 m³, suspension: air, color: grey, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, electronic stability program (ESP), Schmitz aluminum tipper 54m³ - Aluminum box body - Extra light empty weight: 6.227kg - Internal dimensions (L x W x H): 10.54 x 2.44 x 2.1 m - Combi door - ABS/EBS - Roll-up tarpaulin - Lift axle x 2 - ALCOA aluminum rims - HYVA hydraulics - LED lighting system - Schmitz axles - Tires: 385/65R22.5 ca.100% Very good condition! German vehicle! Rental possible! Schmitz aluminum tipper 54m³ - Aluminum box body - Extra light empty weight: 6.227kg - Internal dimensions (L x W x H): 10.54 x 2.44 x 2.1 m - Combi door - ABS/EBS - Roll-up tarpaulin - Lift axle x 2 - ALCOA aluminum rims - HYVA hydraulics - LED lighting system - Schmitz axles - Tires: 385/65R22.5 ca.100% Very good condition! German vehicle! Rental possible! Schmitz benne alu 54m³ - Benne en aluminum - Extra light Poids à vide : 6.227kg - Dimensions intérieures (L x l x H) : 10.54 x 2,44 x 2,1 m - Porte combinée Hedpfx Abevih Dqszsi - ABS/EBS - Bâche à roulettes - Relevant essieu x 2 - Jantes en aluminum ALCOA - HYVA hydraulic system - LED lighting system - Essieux Schmitz - Pneus : 385/65R22.5 environ 100%. Très bon état ! véhicule allemand ! Location possible ! Subject to errors and prior sale. All information without guarantee.

Condition: new, maximum load weight: 33,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, loading space height: 2,900 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, WhatsApp SCHWARZMÜLLER 3-AXLE STANK SEMI-TRAILER NEW VEHICLE AVAILABLE IMMEDIATELY!! Tractor data and equipment 4,500 mm maximum distance from tractor front edge to fifth wheel center 2,240 mm minimum free front distance from fifth wheel center 1,900 mm max. rear turning radius Total train weight (permissible) 44 t in front and rear traffic or with special permit Total weight (technical) 39 t Axle unit load (technical) 27 t Fifth wheel load (technical) 12 t Dimensions Frame length approx. 13,000 mm Total width max. 2,550 mm Loading height front+rear approx. 1,340 mm Semi-trailer horizontal position at approx. 1,150 mm Loading height approx. 1,510 mm Welded steel frame construction Lightweight frame made of high-strength fine-grain steel Straight frame design, all stakes on the frame mounted Frame height at the front approx. 190 mm (without stakes) Replaceable 2" kingpin Frame for fifth wheel height unloaded approx. 1,150 mm - approx. 1,250 mm, with air-sprung tractor unit Screen-printed plate cover 12 mm between the longitudinal members, screwed, extended at the front to approx. support winches (to protect the tractor unit) and at the rear above the chassis, flush with the upper edge of the longitudinal member Support winches, 2 x 12 t, one-sided operation on the right, thrust compensation, Reinforced cross brace, for loading/unloading when the vehicle is uncoupled 3x SAF-Intradisc-Plus integral axles with disc brakes ø430 mm (22.5" disc), Load capacity 9 t/axle, reinforced axle body, off-road version Axle spacing 1,310 + 1,410 mm Axle lift on 1st axle, raises and lowers automatically depending on weight, with forced lowering and speed-limited starting aid Hodpfxon Hrg Re Abzji for button operation in the driver's cab and operation via "3 x brakes" 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Brake system in accordance with EC Directive 71/320 or ECE R13 Two-line compressed air brake system as selected by the factory EBS system 2S2M, one axle sensed RSS - stability program Spring-loaded parking brake on 2 axles Aluminum air tank Brake/air connections with 2 individual coupling heads yellow/red EBS/ABS socket at the front Air suspension with lifting and lowering device Automatic adjustment to programmed driving level from 15 km/h Bellows diameter 360 mm SWIT - Schwarzmüller Intelligent Telematics, "LOCAL TRAC" performance package Axle load display via EBS CAN bus signal for display on display in the driver's cab Extra-strong steel profile front wall approx. 2,500 mm high, with 2 stable center supports, corners beveled at the top approx. 300mm/45° Rail posts attached/replaceable, division: approx. 600 mm, then every 2,400 mm 6 pieces of Exte 144 stanchions, with screwed bracket clamp fastening Rail inclination approx. 0.8° inwards (also suitable for lumber transport) 6 pairs of Exte 144-S stanchions with screw fastening, 2-part telescopic stanchions, load capacity per stanchion pair max. 7t, coated in original signal color orange Telescopic key for operating the Stanchions Stanchion loading height = max. approx. 2,800 mm 8 gripper deflector plates approx. 200 mm long, between the stanchion posts, on the side 6 pairs of lashing hooks on stanchion posts 24-volt lighting system in accordance with EC Directive 76/756/EEC 2 FULL-LED five-chamber tail lights "Aspöck" with integrated ballast 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled by indicator signal 2 license plate lights 2

Condition: used, maximum load weight: 6,582 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, loading space length: 10,575 mm, loading space width: 2,440 mm, loading space height: 3,690 mm, loading space volume: 59 m³, Year of construction: 2025, * Aluminum box body 10.5 * Aluminum combination door, door and pendulum function, with pendulum frame and bow * 2 grain pushers with cover * 1st + 3rd axle liftable * LED reversing lights * 6x 385/65R22.5 * PVC roll-up tarpaulin Hodjvyw Tvopfx Abzji * Chassis HOT-DIP GALVANIZED * Wheels painted in silver RAL 9006 The trailer can also be rented on request Subject to change and prior sale

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, 🇬🇧 MENCI SEMITRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x 2,000 mm Floor thickness: 6 mm Rear floor thickness: 8 mm Kerb weight: 6,650 kg Gross vehicle weight (GVW): 39,000 kg Description, Version & Accessories: - 3rd SAF steered axle with disc brakes or 430 (ET120) 2/2 - 1st axle with automatic lift - CRAMARO electric fully-sealed sliding cover type C (2023) with protective enclosure - Stainless steel toolbox 90x50x50 cm - Toolbox in 90x50x25 cm - Complete ADR kit + A and R plates - Pressure gauge - Electric vibratory motor operated via remote control for tipper body - PROMETEON tyres 385/65 R22.5 - Steel rim 385/65 R22.5 offset 0/120 - Remote control for CRAMARO cover - Additional rear LED work light - Painted hubs - Full LED rear lights - TPMS tyre pressure monitoring system - Hub colour: RED RAL 3020 - Cover tarpaulin colour: BLUE RAL 5002 - Sliding cover with arch height H=300 mm, ADR-rated tarpaulin - 3 climbing steps - Anti-wear corner triangles Steel chassis and alloy body Standard Configuration: - Steel chassis - Air suspension with manual height adjustment valve Hjdpfovzh T Aox Abzsi - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and brake force regulator - Electrical system compliant with ADR regulations - Aluminium air tanks, pneumatic quick dump device for suspension - Tipping system with 5-stage front telescopic cylinder - Pneumatic parking brake - Descent safety valve, dual line hydraulic ram with shut-off valve - Front ladder and removable ladder over mudguards - 2 drawbar mounting holes on rear underrun bar Custom financing or leasing solutions available on site. From 24 up to 96 monthly instalments, also with zero down payment. OUR OTHER LOCATIONS: DOMENICO TRUCK SRL NAPLES OFFICE DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER: MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OFFICE HOURS: MONDAY-FRIDAY 8:30–19:00 - SATURDAY 08:30–14:00 WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semitrailer - Refrigerated Tipper Semitrailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 Axles - Rear 4 Axles - Tway - T-Way - 540 - 460 HP - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition Curtainsider - Box - Tail-lift Van - Refrigerated Cell - Isothermal with Fridge - Van Domenico Truck srl accepts no liability for any discrepancies in technical specifications, options, or features which may, in some cases, differ from those listed in the description. We recommend checking the specific vehicle’s features.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: Hedpfex Nugdex Abzji A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: used, mileage: 920,907 km, power: 331 kW (450.03 HP), tire size: 315/80 R22,5, axle configuration: 4x2, color: green, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, power mirror, = Additional options and accessories = - Aluminium side walls - Autoradio - Climate control - Heater - Mirror heater - Sunroof = More information = Hodpjwhl Upsfx Abzei Suspension: air suspension Axle 1: Tyre size: 315/80 R22,5 Axle 2: Tyre size: 315/80 R 22.5 Empty weight: 8.385 kg Carrying capacity: 9.615 kg GVW: 18.000 kg

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change* Hedpfxeu Dvw So Abzoi

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, loading space volume: 54 m³, Year of construction: 2025, Equipment: ABS, !!FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Approx. 52 m³ Grain Tipping Trailer, Aluminum - Manufacturer: Benalu - Model: Grain Tipping Trailer - Year of Manufacture: NEW VEHICLE - Volume: approx. 54 m³ (9.50 m long x 2.41 m wide x 2.30 m high) - Gross Vehicle Weight: 39,000 kg - Unladen Weight: approx. 5,600 kg - Axles: 3 axles / disc brakes - Tires: 385/65 R22.5 on Speedline aluminum rims - Suspension: Air suspension with raise/lower function - EBS Wabco Hedpfx Aotf Sahjbzoi - Combination door (swing doors and pendulum tailgate) - Pneumatic unlocking of the pendulum tailgate during tipping - 2x grain discharge chutes - 5mm floor - Individual wheel mudguards - Unladen support leg - Folding underrun protection - Load pressure gauge - Operator platform at front - Rolling tarpaulin - Toolbox German vehicle!! German papers!! FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Images are for reference only!!

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: Hsdpfohfiqcjx Abzsi STRONG & LIGHT, now also available for heavy-duty use, from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty use, from 40m³ loading volume and 6,600kg ----Example: high-quality aluminum chassis with high-strength steel trough, REAL 7,160 KG, Chassis with 3x9t axles DCA, with 430mm disc brake, 6x steel rims, 1st axle as lift axle with starting aid, aluminum drop-lift supports (can be uncoupled when loaded), foldable underrun protection, digital loading pressure gauge as axle load indication, tool box, lean-to ladder, Trough made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, wing doors 1/2 - 1/2 with a grain slider on the right, subsequent unlocking of the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), roll-up tarpaulin with a pipe in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long cover, loading edge = 3,650mm, (some of the vehicles shown contain special equipment) ----Other equipment points and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Paintwork and equipment according to customer requirements +500¤ transfer costs ?Offers and images are subject to change ?

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Hedpfxsx Nufte Abzei Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design