Low loader semi-trailer

Faymonville MAX Trailer 2-Achs-Tiefbett-Pendelachsen

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) Nksdpjhlz R Ssfx Acyot -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, maximum load weight: 33,329 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 40 m³, total height: 3,950 mm, Equipment: ABS, Delivery time: approx. 4 months after receipt of order Njdpfegimwijx Acyskt Kässbohrer SSK 40m³, 45m³, 50m³, 60m³ Tipping Silo with Electric Hydraulic System NEW VEHICLE Tank: # 4 x Filling covers DN 450 # 1 x Filling connection DN 100 Storz B # Vacuum valve # Pressure relief valve 2.0 bar # Air line right-hand side, aluminium # Aluminium ladder and walkway left side # Tank colour: RAL 9010 pure white Discharge System: # 4" stainless steel mixing valve on the right with filter preparation and sight glass # DN700 -> DN200 stainless steel cone flap, with pivoting function to the side # DN 200 shut-off valve # 3-way Solimar aeration system Hydraulics: # 4kW electro-hydraulic pump in aluminium box with stainless steel lid (mirror finish) # Aluminium hydraulic oil tank, approx. 190 l capacity # hyva hydraulic tipping cylinder, tipping angle 45° Chassis & Axles: # BPW Airlight II axles with 22.5" disc brakes # 1st axle as lift axle # Wabco braking system EBS 4S/2M with RSS # Wabco ECAS air suspension system # 6 x premium tyres 385 / 65 / 22.5" on Alcoa aluminium rims ET 0 (satin finish) # Chassis colour: RAL 3002 carmine red Other & Accessories: # Aluminium combination toolbox with stainless steel lid (mirror finish) # Aspöck 24V lighting # LED work light rear left # Hose container on both sides, 5m length DN 200 (Storz A) # 1 x rubber mallet # 2 x hook spanners ----Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side Njdok Af Svjpfx Acyokt -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2015, loading space length: 134,450 mm, loading space width: 2,550 mm, loading space height: 480 mm, suspension: hydraulics, Year of construction: 2015, Equipment: ABS, = Additional options and equipment = - Central lubrication = Further information = Axle configuration Suspension: hydraulic suspension Rear axle 1: Max. axle load: 12,000 kg; Steered Rear axle 2: Max. axle load: 12,000 kg; Steered Weights Unladen weight: 12,660 kg Payload: 34,340 kg Gross vehicle weight: 47,000 kg Functional Loading platform height: 48 cm Extendable body: Yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request Further information Contact David F Middelman for more information. Nedpfx Acevtc Aieyjkt

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Neck: - Gooseneck in SNT design to optimize load platform length, approx. length 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical kingpin load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Nksdexbmn Uspfx Acyet Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines run protected inside the extendable beams and adjust automatically to the respective bed length - 5 pairs of fold-out lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for fitting bolted RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate surface, and continuous prism-shaped digger recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of laying lashing rings in the recess LC 16,000 daN - 1 pair of laying lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE system, all axles forced-steered hydro-mechanically - Hose break valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Axles finished with 2 layers of 2K paint, single-color painted in FAY-Grey-34-0260 - Technical axle load: 12,000 kg per axle, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – Brand at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Electrical system: - Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the turn signal - ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - Complete steel structure automatically shot-blasted after welding with a blast wheel system - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red per RAL system 841GL Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote steering from front and rear via cable control with push buttons, including axle tracking control (without installation in tractor unit) - Electro-hydraulic power unit - 2 pairs of bolted container locks on the outer beams; includes 2 pairs of container locks for 1 x 20' or 1 x 40' container - On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) - Rear galvanized plug-in stakes are removable

Condition: used, axle configuration: 2 axles, first registration: 06/2021, suspension: air, tire size: 245/70R17.5, wheelbase: 9,920 mm, color: red, Year of construction: 2021, Meusburger MPG-2 - Air suspension - BPW axles - Extendable by 450 cm - Loading height: 30 cm - Remote control for steering - Wide marker boards = Further Information = Tyre size: 245/70R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Steering; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Rear axle 2: Twin tyres; Steering; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 60%; Tyre tread right outside: 60% Unladen weight: 10,300 kg Payload: 27,700 kg Nkjdsuycrnopfx Acyet Gross vehicle weight: 38,000 kg Model number: MPG-2 / REMOVABLE NECK / EXTENDA = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information; however, no rights can be derived from the texts provided.

Condition: used, maximum load weight: 33,980 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 02/2022, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, total width: 2,540 mm, total height: 2,300 mm, Year of construction: 2022, Equipment: ABS, Low bed trailer with externally mounted beams in extendable SUPER LOW design, length approx. 6,850 mm * Overall length extendable from 13,500 mm to 19,000 mm * Loading area width extendable from 2,540 mm to 3,000 mm * Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking system * Supply lines are protected within the extendable beams and automatically adjust to the respective low bed length * 5 pairs of lashing rings foldable outwards (LC 10,000 daN) * 6 pairs of threaded blocks on the inside beam for mounting screwable RUD rings Rear chassis * Rear chassis with closed outer frame, checker plate covering, and continuous prismatic excavator trough, approx. 1,250/700 x 505 mm, open at the rear * 2 pairs of lashing rings foldable outwards (LC 10,000 daN) * 1 pair of horizontal lashing rings in the trough (LC 8,000 daN + 5,300 daN) * 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, on the outer frame Nedpfxowla Rts Acyskt Gooseneck * Gooseneck in SNT design for optimizing loading area length, length approx. 3,785 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 23,000 kg Suitable for tractor units: 4x2, 6x2 and 6x4 PENDLE AXLE * All axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-pins to secure in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools * Tires 245/70 R 17.5 3PMSF load index (146/146F), new spare wheel Brake system * Brake system according to EU regulations with EBS-E (2S2M) with connecting lines to the tractor unit Electrical system * Remote control for axle steering * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC Paintwork * First-class and durable corrosion protection * High-quality two-component (2K) single-color top coat * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holders * Electro-hydraulic unit * Yellow reflective tape according to EU regulations on the side, the extension and the rear of the trailer * Bracket for a rotating beacon at the rear of the trailer, including beacon * European reflective plates (red-yellow) at the rear of the trailer * Mountings for warning signs including sockets on both gooseneck and rear left/right panel * Manual and documentation * 80 km/h speed sticker at the rear and on both sides * Load gauge to determine axle load including load diagram * Subject to errors, modifications and prior sale.

Condition: used, maximum load weight: 29,900 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 04/2009, loading space volume: 45 m³, Year of construction: 2009, Equipment: ABS, * Feldbinder 3-axle tipping silo with compressor and tipping hydraulic system * Volume 45m³ * Air suspended * Lifting axle * SAF axles * Alloy wheels * EBS Nedpswqmddofx Acyokt * ABS

Condition: used, maximum load weight: 34,500 kg, overall weight: 50,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2026, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low loader / low-bed trailer in full specification First registration 05/2025, brand new vehicle Overall length: 13,065 to 17,565 mm (simple telescopic extension 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Extended low-bed length: 11,150 mm Gooseneck length: 3,650 mm Nodpfx Asw A Ekmecyokt Rear axle assembly length: 2,765 mm Loading height on rear axle assembly: only 845 mm LOADING HEIGHT LOW-BED: only approx. 300 mm (loaded) Technical gross weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis with 3-coat paintwork Detachable gooseneck with external main frame Central lubrication system for front carriage and an additional unit for rear carriage All axles with hydraulic forced steering GIGANT axles with drum brakes WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard PENDLE AXLES with hydraulic suspension, 600 mm stroke RADIO REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental Electric-hydraulic system, 24 volt Oversize package 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for 40 FT or 20 FT containers Drop-side body on saddle platform Ramps for accessing the low-bed platform 5 pairs of swivelling lashing rings, each rated at 10,000 daN lashing capacity in the low-bed section 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing rings on the rear carriage 1 pair of lashing rings in the rear underrun guard, LC 6,000 daN RENTING is the new BUYING – available immediately for rent or full-service leasing.

Condition: used, axle configuration: 2 axles, first registration: 01/2019, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2019, Meusburger MPG-2 Nkodpjuycziofx Acyot AIR suspension. BPW axle. Extendable up to 450 cm. Loading height: 30 cm. Remote control for steering. Wide marker boards. = Further information = Tyre size: 245/70R17.5 Suspension: Air suspension Front axle: Twin tyres; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle: Twin tyres; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Unladen weight: 10,300 kg Payload: 25,700 kg Gross vehicle weight: 36,000 kg Type number: MPG-2 / EXTENDABLE / AGRI / REMO = Company information = ALL PRICES ARE NET EXPORT. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We strive our best to provide correct information, but no rights can be derived from the texts provided.