Used Faymonville Low Loader Semi-Trailer for sale (34,643)

Condition: excellent (used), first registration: 07/2021, loading space length: 134,500 mm, loading space width: 2,550 mm, loading space height: 770 mm, total length: 13,450 mm, total width: 2,550 mm, total height: 770 mm, Year of construction: 2021, Equipment: ABS, = Additional options and equipment = Hnsdpfsyxrdxox Aaask - Air suspension = Further information = Unladen weight: 8,520 kg Payload: 31,000 kg Gross vehicle weight: 50,900 kg Loading height: 77 cm Technical condition: very good Visual condition: very good Price: On request

Condition: used, axle configuration: 3 axles, first registration: 01/2010, total length: 13,140 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R 17.5, wheelbase: 9,010 mm, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Lift axle = Further information = Axle configuration Tire size: 245/70 R 17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Steering; Tire tread left inside: 20%; Tire tread left outside: 20%; Tire tread right inside: 20%; Tire tread right outside: 20% Rear axle 2: Twin tires; Steering; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Rear axle 3: Twin tires; Steering; Tire tread left inside: 25%; Tire tread left outside: 25%; Tire tread right inside: 25%; Tire tread right outside: 25% Weights Unladen weight: 13,060 kg Hnodpfeyz A E Eox Aaaok Payload: 34,940 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 90 cm Condition Damages: none Identification Registration number: OK-58-YS

Condition: excellent (used), functionality: fully functional, empty load weight: 12,500 kg, maximum load weight: 29,500 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 11,200 mm, loading space width: 2,550 mm, suspension: air, color: red, Year of construction: 2022, Kässbohrer LB2 TIEF-BETT low loader semi-trailer / 16.5 m / Extendable semi-trailer / steered axles / 2 units Year 2022 Technical data GVM 42000 kg Registered GVM 38000 kg Weight 12500 kg Load capacity 29500 kg 2 steered axles BWP axles Pneumatic suspension Disc brakes Remote control Detachable front The length of the main deck 660 cm The length of the extendable deck 460 cm Total length of the main deck 1120 cm Rear deck length 270 cm Height for driving 40 cm Width with extensions 255 cm Core width 130 cm Expanded by 25 cm to each side Hnedpfxjyz R Rvs Aaaok Special permissions: Vehicle width 3.20 m The distance between the axis of the coupling pivot and the rear end of the semi-trailer 16.525 m GVM 38000 kg Permissible pressure on an axle group 20000 kg (1st axle – 10000 kg; 2nd axle – 10000 kg) The semi-trailer is in excellent technical and visual condition. Full documentation. 2 identical semi-trailers available

Condition: excellent (used), functionality: fully functional, mileage: 350,000 km, power: 375.1 kW (509.99 HP), fuel type: diesel, tire condition: 100 %, axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, Equipment: AdBlue, air conditioning, cruise control, MAN TGX 28.510 6×2 / Kässbohrer LB2 TIEF-BETT low loader semi-trailer / Extendable semi-trailer 16.5 m / steered axles / GVW 65 t Year 2022 Mileage 350,000 km Technical Specifications GVW 26,000 kg GVW 65,000 kg Weight 8,774 kg Payload 17226 kg Power 510 hp Engine capacity 12,419 ccm 6×2 JOST fifth wheel New tires 3rd lifting axle Additional fuel tank Rear air suspension Sleeper cab with 2 beds Air conditioning Webasto Automatic gearbox Sunroof Axle lock Radio Tachograph Vehicle purchased and serviced at a Polish MAN dealership. 100% accident-free, full documentation, 1 owner. Excellent technical and visual condition. Kässbohrer LB2 TIEF-BETT low loader semi-trailer / 16.5 m / Extendable semi-trailer / steered axles / 2 units Year 2022 Technical data Hedpoyz R Afjfx Aaaonk GVM 42000 kg Registered GVM 38000 kg Weight 12500 kg Load capacity 29500 kg 2 steered axles BWP axles Pneumatic suspension Disc brakes Remote control Detachable front The length of the main deck 660 cm The length of the extendable deck 460 cm Total length of the main deck 1120 cm Rear deck length 270 cm Height for driving 40 cm Width with extensions 255 cm Core width 130 cm Expanded by 25 cm to each side Special permissions: Vehicle width 3.20 m The distance between the axis of the coupling pivot and the rear end of the semi-trailer 16.525 m GVM 38000 kg Permissible pressure on an axle group 20000 kg (1st axle – 10000 kg; 2nd axle – 10000 kg) The semi-trailer is in excellent technical and visual condition. Full documentation. 2 identical semi-trailers available

Condition: new, functionality: fully functional, mileage: 350,000 km, power: 375.1 kW (509.99 HP), overall weight: 65,000 kg, fuel type: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,550 mm, loading space length: 13,190 mm, Year of construction: 2025, Equipment: air conditioning, differential lock, MAN TGX 28.510 6×2 / BRAND-NEW Kässbohrer LB3E low-bed semi-trailer / 2025 / GVW 65 t MAN TGX 28.510 6×2 / Sleeper cab / NEW tires / GVW 65 t Year 2022 Mileage 350,000 km Technical Specifications GVW 26,000 kg GVW 65,000 kg Weight 8,774 kg Payload 17226 kg Power 510 hp Engine capacity 12,419 ccm 6×2 JOST fifth wheel New tires 3rd lifting axle Additional fuel tank Rear air suspension Sleeper cab with 2 beds Air conditioning Webasto Automatic gearbox Sunroof Axle lock Radio Tachograph Vehicle purchased and serviced at a Polish MAN dealership. 100% accident-free, full documentation, 1 owner. Excellent technical and visual condition. Hedpfx Aaeyz Nt Asasnk BRAND-NEW Kässbohrer LB3E low-bed semi-trailer / 2025 / 4 axles 1st registration 2025 Mileage 0 km Low-bed semi -trailer Weight 11170 kg Load capacity 38830 kg Platform length 924 cm Total length 1319 cm Platform height 87.5 cm Total width of the platform 255 cm Permitted platform width 3.15 m 4 SAF axles Lifted axle 2 rear axles steered Drum brakes Tire size 245/70 R 17.5 Folding ramp Ramp length 275 cm Special permissions based on decision No. TDT-ODS-277/25 (Transport Technical Inspection) Air suspension Permissible width of the vehicle 3.15 m GVM 58000 kg Permissible axle load 1-10000 kg 2 – 10000 kg 3 – 10000 kg 4 – 10000 kg We offer 4 brand-new Kässbohrer 3-axle low trailers and 2 brand-new Kässbohrer 4-axle low trailers

Condition: used, empty load weight: 10,650 kg, maximum load weight: 40,310 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 10/2024, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5, color: grey, Year of construction: 2024, operation weight: 10,650 kg, Equipment: ABS, For every used semi-trailer, you receive a current and complete inspection and functional report. Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck with straight rear design - 3 pairs of lashing rings (LC 5,000 daN) Loading surface: - Extendable loading platform - 5 pairs of folding outward lashing rings (LC 5,000 daN) - 3 pairs of folding outward lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, with chequer plate floor above the axles Axles and tyres: - BPW axles, two rigid and two self-steering trailing axles - Air suspension, with drum brake, with lift/lower function - The self-steering axles can be locked electromagnetically via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: Hnedsxfa E Uspfx Aaaek - Steel structure made from high-strength fine-grain steels - Steel qualities: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour, in Nova Gray Accessories included: - Spare wheel carrier in front of the bulkhead - 2" king pin - Galvanised steel bulkhead approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the bulkhead - Galvanised folding supports under the chamfer of the loading platform - Bracket for rotating beacon at the rear of the trailer - Galvanised extendable widening devices, extendable by approx. 230 mm per side - White reflective tape to EU standards on the sides, on the extension, and red at the rear - One mounting bracket each for warning signs, including socket, on the gooseneck and rear plate left and right - One mudflap at the rear - European reflector plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Removable ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) - 7 pairs of WADER container pockets: 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle on the front axle with control via TEBS E depending on axle load and current payload status - Movable hanging bar for ALU loading ramps at the rear of the vehicle - Anti-slip sand coating painted onto the chequer plates on the gooseneck and loading platform - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with positioning light - Mounting bracket for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then specified visible surfaces finished with ZINACOR 850 metallisation (Zinc 85% - Alu 15%) by hot-refining

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 29,000 kg, overall weight: 38,000 kg, first registration: 08/2020, color: red, Year of construction: 2020, ES-GE 2-axle low-bed, non-telescopic, Tridec steering Total weight: 38,000 kg Aggregate load (2 x 10,000 kg): 20,000 kg Fifth wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Length of loading area: approx. 13,200 mm Width of loading area: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing-through radius SZM: approx. 2,100 mm Saddle height: approx. 1,150 mm B dimension: approx. 12,000 mm Length of high bed: approx. 3,700 mm Loading height high bed: approx. 1,480 mm Length of low bed: approx. 6,500 mm Loading height low bed: approx. 250 mm Ground clearance low bed: approx. 100 mm Loading height above axle unit: approx. 3,000 mm Specification SZM A dimension: approx. 4,500 mm Semi-mounted height: approx. 1,150 mm Swing-through radius: approx. 2,100 mm Chassis: - Chassis made from high-quality fine-grained steels - Drop deck in rigid design - Axle unit cannot be lowered - Without excavator trough King pin -2" kingpin Supports - without front jacks Axles - 2 x 10,000 kg axles (17.5"), techn. 12,000 kg each - Gigant make - Closed drum brake. Asbestos-free brake linings - Automatic slack adjusters. Center centering - Center distance approx. 1,360 mm Suspension - Air suspension with lifting and lowering - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic stub axle steering - All axles are steered. Make "Tridec" Tires - 9 tires 245/70 R 17.5 with load index 146/146 F - Continental tires - Steel rims Hodpfx Aju U Np Tjaaenk Brake - Dual-circuit air brakes in accordance with EC directive, make "Knorr" - Automatic load-dependent brake force control - Controlled via standard red/yellow air clutches in accordance with ISO 1726 - Electronic brake, "EBS", 7-pin socket in accordance with ISO 7638, mounted at the front, in accordance with EU directives. WITH ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake by means of spring-loaded cylinder - 4 wheel chocks with holder - Without connecting hoses (reversible flex) to the tractor unit - Aluminum air reservoir - TIMG2 (Trailer Information Module) fitted to read out the current axle loads Underride guard - Integrated in the rear end plate Side frame - Side frame made of UNP steel approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, can be folded outwards, mounted in the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force in the rear area of the gooseneck, approx. 400 mm from the floor - 1 pair of lashing rings with a tensile force of approx. 13,400 kg at the rear in the low bed on the vertical neck - 7 stake pockets per side on the inside of the outer frame, for stakes approx. 80x50x4 mm, evenly distributed in the outer frame over the entire length of the cargo bed - 6 stake pockets welded to the outside of the side member on each side Floor - Approx. 28 mm thick hardwood floor with omega profiles, laid between the side members - Tear plate (approx. 8/10 mm) over the axle unit Front wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, across the entire width of the loading area, beveled corners Drop sides - 3 plug-in anodized drop sides on the gooseneck, approx. 2,440 x 400 mm - Rear stanchions, galvanized Galvanization - Steel blasting of all iron parts - Galvanizing of the chassis Painting - Priming and single-color painting in RAL 3002 chi

Condition: used, empty load weight: 14,640 kg, maximum load weight: 27,760 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2009, suspension: air, color: blue, Condition - Very well-maintained vehicle from first owner Category - Semi-trailer Brand - Nooteboom Model - MCO-48-03 - 3-axle low loader Hjdpfx Aewn H Anjaajnk Registration month - 09 Registration year - 2009 Gross weight in kg - 42,000 Empty weight in kg - 14,640 Payload in kg - 27,760 Color - Blue Number of axles - 3 Commercial/Export - Net price in € - 29,990 Subject to alterations, prior sale, and errors Phone +49 551 50 84 912

Condition: good (used), functionality: fully functional, empty load weight: 4,100 kg, maximum load weight: 34,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 05/2026, suspension: air, tire size: 235/75 R17,5, color: black, Year of construction: 2021, Multicont ATL container body for 40-foot and 45-foot containers, 45-foot swap body system, storage box, rear underrun protection extendable for 45 feet, chassis available in 91161 Hilpoltstein. Hnodpsvrz Nxsfx Aaaek

Condition: new, functionality: fully functional, BERTOJA SEMITRAILER 13.80m NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Hnedpfx Ajxpi A Rjaaok Edge rail on neck Winch preparation Self-steering axle CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM - 7:00 PM / SATURDAY 8:30 AM - 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semitrailer-Refrigerated Semitrailer Tipper – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box body-Liftgate - Refrigerated Cell- Insulated with Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies in technical specifications, options, and features, which may in some cases differ from those described. We invite you to verify the specifications of the specific vehicle.

Condition: excellent (used), functionality: fully functional, empty load weight: 15,900 kg, maximum load weight: 42,100 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 11/2001, loading space length: 8,960 mm, loading space width: 2,520 mm, total length: 12,950 mm, total width: 2,520 mm, total height: 3,800 mm, suspension: hydraulics, tire size: 245/70R17,5, wheelbase: 1,360 mm, maximum speed: 90 km/h, color: blue, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, Nooteboom MCO-73-04V TOP trailer from first owner, first registered 21.11.2001. Overhauled in 2014. Brakes renewed in 12/2025! Gross train weight 66,000kg with 3-axle tractor unit, Gross vehicle weight 58,000kg, Kingpin load 18,000kg, axle loads for axles 1-4: 10,000/10,000/10,000/10,000kg, Unladen weight 15,900kg, For exact dimensions, please refer to the technical data sheet. Lowbed: 8.96m + 5.50m extension. Hydraulic supports at front and rear make it easy to lift the trailer along with 30t load completely, for side unloading at ramps. Hydraulic suspension (allows leveling with uneven load distribution). First axle liftable. 4 axles steerable, either automatically or via remote control as required (also for counter-steering). Hydraulic ramps + hydraulically extendable up to 3,000mm, Loading platform expandable up to 3,000mm, Hedpsyqm I Uefx Aaajnk Tires: 245/70R17.5, 1st axle: 6/6/6/6mm, 2nd axle: 11/11/8/8mm, 3rd axle: 9/9/7/7mm, 4th axle: 11/11/7/5mm, spare wheel 6mm. Further details on request. Sale only to businesses or for export. Leasing / financing available on request – immediate processing, also possible without down payment! More information and requirements upon request. The vehicle description serves only for general identification of the vehicle. The details, pictures and descriptions are provided without guarantee! Equipment should be checked separately if necessary. The seller assumes no liability for possible typographical or data transmission errors. Subject to errors and prior sale. Thank you very much for your interest! We look forward to your visit. Our SERVICE We are happy to take your used vehicle as trade-in, 30-day customs plates incl. insurance, EUR-1 & all export documentation, TÜV / SP / UVV / Tachograph inspection / OBU installation, Professional delivery to the customer, Transfer from Stuttgart Airport / Sindelfingen Train Station to us by arrangement, Retrofitting of accessories and further individual customer requests possible by arrangement.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: YA9TL510050113953, empty load weight: 27,720 kg, maximum load weight: 70,000 kg, overall weight: 100,000 kg, axle configuration: > 3 axles, first registration: 08/2005, next inspection (TÜV): 12/2026, loading space length: 14,200 mm, loading space width: 3,250 mm, total length: 23,950 mm, total width: 3,250 mm, total height: 1,050 mm, suspension: hydraulics, color: blue, Year of construction: 2005, number of axes: 7, For sale: low loader from Faymonville. Number of axles: 2+5 = 7 Hedpfxex Afbve Aaaonk Always serviced in our own workshop and is in top condition. The trailer has been used exclusively for transports within the EU – Baltics, Germany, and the surrounding region. Approximately 1–2 times every three months. The low loader is located in Latvia, 3405 Liepaja! See details in the photos!

Condition: new, empty load weight: 11,000 kg, maximum load weight: 38,500 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with 15 x 15 mm square anti-slip bars and widened at the lower section - Between the 1st and 2nd axle, one pair of permanently installed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the rear slope projecting into the loading area for excavator dipper arm storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) - Including 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t per section Two-part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with 48 mm thick hardwood surfacing - Ramps with hydraulically foldable ramp sections, hydraulic lifting gear, and hydraulically transverse-adjustable Axles and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tool kit - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories Included: - At the gooseneck and at the rear, left and right, each with a holder for warning signs, including socket Hnedpfsup U Hzox Aaajk - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks - Galvanized extensions, extendable by approx. 230 mm each side - Galvanized folding supports under the sloped rear of the loading area - Holder for rotating beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and loading area - White reflective tape in accordance with EU regulations on the sides and on the extension, red at the rear - Rear-mounted electro-hydraulic power unit underneath the loading area - Ramp control valves mounted on the right-hand side of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Four extendable warning signs, about 423 x 423 mm, each with a position light (extendable about 400 mm) - Mounting for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side walls and rear wall ca. 2,440 x 400 mm - The rear, galvanized plug-in posts are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - One removable, galvanized intermediate table with 1 pair of WADER container pockets - Square anti-slip bars 20 x 20 mm every 200 mm on the outer frame of the rear slope - Painted sand grip layer as anti-slip protection on the checker plates on the gooseneck and loading area - 80 km/h speed stickers at the rear and on both sides - Ax

Condition: new, empty load weight: 8,900 kg, maximum load weight: 40,100 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, operation weight: 8,900 kg, Chassis: - Sturdy steel frame welded construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck section of frame 200 mm with beveled front corners - Tapered gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area behind the rear taper) - 2 king pin positions with replaceable 2” king pin - Outer frame closed outwards as a perforated outer frame - Loading area with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame stepped 80x80 mm before and after the division - Reinforced frame design / point load in retracted state centered at the center of gravity - Without extendable load area widenings, but prepared for retrofit (= guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, running to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (coated with Körapur), depth approx. 400 mm - Underrun protection = extended rear closing plate - Drop-down stabilizers at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift of approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Side aluminum underride protection - 4 wheel chocks with holders - Long license plate holder in rear closing plate - 1 plug-in ECE plate at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 2x on the loading area before extension - 7x after extension - Extendable warning boards incl. 3 marker lamps each, at the front on the landing gear and at the rear before closing plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning boards insertable into stake pockets on the loading area Hedpfx Ajxnnk Dsaajnk - 6 pairs of stake pockets on the side for stakes 100x50 mm - 2 transverse rows of stake pockets for stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after king pin positions) - 3 transverse rows of stake pockets for stakes 100x50 mm on the loading area from outer frame inward to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accept 1x 20ft container - Rubber apron mounted on underrun protection Ramps available as an option.

Condition: new, empty load weight: 9,800 kg, maximum load weight: 39,200 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, operation weight: 9,800 kg, Equipment: ABS, Chassis: - Sturdy welded steel frame construction with front frame drop and flat loading area, rear tapered approx. 500x100 mm - Gooseneck 200 mm with chamfered front corners - Tapered gooseneck end approx. 500 x 100 mm (traction ribs on outer frame in the area of rear taper) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed to the outside as a perforated outer frame - Loading area with extendable central frame; extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after split with step 80x80 mm - Reinforced frame / point load in retracted position at center of gravity - Without extendable load bed widenings, but prepared for retrofitting (i.e., guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair of wheel recesses between 1st and 2nd axle, steel covers (covers with Körapur coating), approx. 400 mm deep - Underride guard = extended end plate - Drop-type rear supports Ramps: - 2 special two-part loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting equipment (only with electrohydraulic unit) - Width approx. 800 mm - Wooden surfacing - Incl. traction ribs on loading ramps - Can be secured in travel position with tie-down straps - Operated by control lever mounted at the rear on right side in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch timber floor with aluminium omega profiles Landing Legs: - Mechanical 24t landing legs, single-sided operation, with compensation for uneven support Axles, Steering, and Tyres: - BPW air suspension axles, each 10t axle load, air spring diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device, total lift approx. 200 mm - 2nd travel position via ball valve +50 mm Hnedpfxsxgm S Do Aaask - 1st axle as lift axle (wired via EBS), fully automatic operation with mechanical emergency actuation via button on trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered inset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Removable side and rear boards on gooseneck approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks - 1 plug-in ECE plate at rear - 11 pairs ZK modules 10t at sides: - 2x on gooseneck - 2x on loading area before sliding extension - 7x after sliding extension - Extendable warning signs incl. 3 position lamps each, at front on landing gear, rear before end plate, infinitely extendable to max. load width 4,500 mm - 4 insertable brackets for warning signs in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm drop-in stakes - 2 cross rows of stake pockets for 100x50 mm drop-in stakes on gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm drop-in stakes on loading area from outer frame to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates embedded in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Condition: new, empty load weight: 10,100 kg, maximum load weight: 38,900 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, operation weight: 10,100 kg, Equipment: ABS, Chassis: -Sturdy welded steel frame construction with front frame cranking and flat loading platform with rear tapered section approx. 500x100 mm -Frame neck 200 mm with chamfered corners -Chamfered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind the rear taper) -2 kingpin positions with interchangeable 2” kingpin -Outer frame closed to the outside as perforated outer rail for lashing with tie-down straps (no chains possible) -Reinforced frame design / point load at center of gravity -Preparations for extendable loading platform wideners -With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle extending to end of vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underride guard = extended end plate -Drop-down rear support legs Ramps: -2-part special design loading ramps with mechanical extension -Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting gear (only in combination with electrohydraulic unit) -Width approx. 800 mm -Wooden ramp surface -Including traction ribs on loading ramps -Can be secured in transport position with tie-down straps -Operated via control lever, mounted at rear on right side in driving direction -Laterally shiftable via hydraulics Floor: -35 mm larch wood floor with aluminum omega profiles Landing Legs: -Mechanical 24-ton landing legs with single-side operation and load compensation Axles, Steering, and Tires: -BPW air suspension axles, 10 tons axle load each, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake linings -Automatic brake slack adjusters Hnjdpfx Ajwviwkjaajk -Lift and lower device with total lift approx. 200 mm -2nd transport position via ball valve +50 mm -1st axle lifting axle (wired via EBS), fully automatic activation with mechanical emergency actuation via push button on the trailer -3rd axle as friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Stakeboard side and rear walls on the gooseneck, approx. 400 mm high, plug-in design -Spare wheel holder -Side aluminum underrun protection -4 wheel chocks -Long license plate mount on rear end plate -1 ECE warning panel at the rear, plug-in -11 pairs of ZK 10t side lashing modules: -2x on the gooseneck -9x on the loading platform -Steel fenders with Clear-Pass -Extendable warning boards incl. 3 position lights each, at the front on the landing legs and at the rear in front of end plate, smoothly extendable up to loading width of 4,500 mm -4 holders for warning panels, plug-in, in stake pockets on the loading platform -6 pairs of side stake pockets for 100x50 mm plug-in stanchions -2 cross rows of stake pockets for 100x50 mm stanchions on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) -3 cross rows of stake pockets for 100x50 mm stanchions on the loading platform from outer frame to main frame (1x at the front section, 1x before 1st axle, 1x after 3rd axle) -2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container -Rubber skirt mounted on underride guard -Steel shot blasting, hot-dip galvanizing of chassis and priming -Paintwork chassis/wheel hubs/outer frame i

Condition: new, empty load weight: 8,950 kg, maximum load weight: 40,050 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,950 kg, Equipment: ABS, Chassis: -Sturdy steel frame welded construction with front frame cranking and flat loading area, rear taper approx. 500x100 mm -Frame neck 200 mm with beveled corners -Beveled end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) -2 king pin positions with interchangeable 2” king pin -Outer frame closed to the outside as a perforated outer frame for lashing with tie-down straps -Reinforced frame design / point load at center of gravity -Provisions for extendable widening of the loading area -With excavator recess, depth approx. 220 mm, width approx. 600 mm, starting approx. after the 2nd axle to the end of the vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underrun protection = extended end plate -Drop supports at the rear Ramps: -2 single-piece aluminum loading ramps with spring assist -Length x width approx. 2,500 mm x 600 mm -Can be secured in transport position with tie-down straps -Laterally manually adjustable Floor: -35 mm larch wood floor with aluminum omega profiles Landing gears: -Mechanical 24 t landing gears with single-side operation and load compensation Axles, steering, and tires: -BPW air suspension axles, each 10 t axle load, air bag diameter 360 mm -S-cam brake 300/200 mm, asbestos-free brake linings -Automatic slack adjusters -Lift and lowering device with total lift approx. 200 mm -2nd driving position via ball valve +50 mm -1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via push button on the trailer -3rd axle as self-steering trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, with center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Incl. tire pressure monitoring Brake system: -Dual-line brake with EBS-E incl. RSS -EBS (WABCO 4S3M) -Spring-actuated parking brake -Air connection yellow / red Painting: -Steel grit cleaning, sprayed galvanizing of chassis and primer -Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau -Plastic parts black, unpainted -Rims: factory silver -Reflective strips on the sides and rear in yellow Accessories: -Side and rear plug-in side walls on gooseneck approx. 400 mm high -Spare wheel holder -Aluminum approach guard -4 wheel chocks -Steel fenders with Clear-Pass -Elongated license plate bracket in the end plate -1 removable ECE sign at rear -11 pairs ZK modules 10t on the side: -2x on gooseneck -9x on loading area Hedpfowu Agisx Aaasnk -Without rear towing eyes -Extendable warning panels incl. 3 position lights each, at the front on the landing gears and at the rear before the end plate, infinitely extendable up to loading width 4,500 mm -4 plug-in mounts for warning panels in stake pockets on the loading area -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x in front of and 1x after king pin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward to main frame (1x at the front section, 1x before 1st axle, and 1x after 3rd axle) -2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection

Condition: new, empty load weight: 29,600 kg, maximum load weight: 72,400 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 6,650 mm, loading space width: 2,840 mm, loading space height: 550 mm, tire size: 285/70 R19.5, color: grey, operation weight: 29,600 kg, Equipment: ABS, Gooseneck: -Hydraulic gooseneck Raisable/lowerable and removable -Length approx. 3,650 mm -For tractor units: 6 x 4 or 8 x 4 2-axle chassis at the front: -Hook attachments at the front and rear -Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator bridge "BB-A": -Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear -Length x base width approx. 6,650 mm x 2,850 mm -Beam height x beam width approx. 400 mm x 1,350 mm -Loading height 550 mm with ground clearance 150 mm 4-axle chassis at the rear: -Mechanical bolt-and-link coupling for attaching a low bed at the front, end cross member at the rear -Chassis length x Chassis width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum axle and tires (front and rear chassis): - "Pendulum axle", all axles hydromechanically steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pins for securing in the raised position - Final axle paint finish with two coats of 2-component paint in MB 7350 Nova Gray - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 285/70 R19.5 Steering: - Front and rear steering can be operated via cable remote control using push buttons, with axle alignment control - Power socket for operating the steering system on the chassis Gooseneck -Cable remote control with pushbuttons including axle alignment control Accessories included: Hnedpfswcmhasx Aaajk -Yellow-red air couplings on the galvanized connection strip at the front -Steel bulkhead, approx. 400 mm high -4 wheel chocks -3.5" kingpins -One 7-pin socket on the left and right rear of the gooseneck for the warning sign -Gallows with winch for spare wheel on the front of the gooseneck -Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must hold at least 80 liters with couplings -Aluminum side walls and rear wall that can be attached to the gooseneck, approx. 400 mm high, anodized -Control lever on the gooseneck protected by a hinged cover -A separate air connection with air gun on the gooseneck -Bekamax central lubrication system, 1x on the Gooseneck, 1x on the 2-axle chassis and 1x on the 4-axle chassis - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-loader hook attachment - 2 spare wheels - One 7-pin socket on the left and right, front and rear of the rear chassis for the warning sign - Front chassis with a separate air connection for pneumatic screwdrivers - Foldable extensions with steel mattresses, adjustable in width from approx. 2,850 mm to approx. 3,250 mm - The steel mattresses can be inserted in two positions to create a lowered loading area - Steel mattresses with rubber flooring, approx. 12 mm thick - Screw-in option (⌀ 40 mm) every approx. 500 mm outside on the upper chord of the outer tube of the excavator bridge for screw rings - One locking point every approx. 500 mm on the extension with mechanical locking Locking mechanism -A socket on the rear chassis for the cable remote control of the self-steering system -Two reversing lights on the rear panel -Four warning signs, approximately 423 x 423 mm, extendable by approximately 2,000 mm, with a position light -One work light, left and right, on the rear panel of the gooseneck with separate on/off switches -Two stainless steel tool boxes, approxim

Condition: new, empty load weight: 10,300 kg, maximum load weight: 39,200 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface can be raised and lowered hydraulically after the gooseneck Length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8° Cut-outs in the outer frame of the cargo bed for attaching tensioning straps (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: -One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Axles, suspension and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF tires -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes -Galvanized folding supports under the bevel of the cargo bed -A bracket for a rotating beacon at the rear of the trailer -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -One bracket for the warning signs on the gooseneck and on the ramps on the left and right, including socket -Control valves for the ramps fitted on the right-hand side of the trailer -European reflector signs (red/yellow) at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable (length of the body approx. 2,560 mm) -An electric cable winch with radio remote control approx. 5,400 kg lifting force, including 9.5 mm thick wire rope 24 m long with rope guide roller Hnjdeu Hp Hrspfx Aaaek -Screwed 5to ring for reeving the cable winch cable on the neck without deflection pulley -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition -7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) -1 pair of recessed lashing rings along the central beam at the rear of the bevel (LC 10,000 daN) -A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm -Speed sticker 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 10,900 kg, maximum load weight: 37,100 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,600 mm, loading space width: 2,540 mm, loading space height: 890 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, operation weight: 10,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 6° -Technical fifth wheel load: 18,000 kg -For tractor units: 4 x 2 and 6 x 2 Loading area: -Loading area, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6° -Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg -Grating and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area Ramps: -A pair of two-part AXS steel ramps with a length of approx. 4,675 mm and a width of approx. 900 mm -Grating floor -Hydraulically hinged ramp tips -Ramps can be moved hydraulically by approx. 235 mm outwards and approx. 365 mm inwards -Painted sand coating on the outer frame of the ramp and on the ramp tip -Flashlights on the outside of the ramp tips with switch next to the ramp controls -Ramp secured in driving position using a quick release Axles, suspension and tires: -BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle with self-steering -1st Axle with traction aid -Operation via the brake pedal in the tractor unit -Technical axle load: 12,000 kg -Air suspension with lifting and lowering valve -235/75 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 -TPMS tire pressure monitoring sensors mounted in all wheels including spare wheels Braking system: -WABCO EBS-E brand braking system in accordance with EU regulations Paintwork: -Semi-trailer MB 7350 Nova gray Accessories included: -Bulkhead made of steel, plug-in, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -JOST module B - static test load = 50,000 kg -Continuous grating with 5 mm sheet metal underlay as additional reinforcement -Painted sand coating -Cutouts in the outer frame of the loading area and the lifting bed for hanging control valves for the hydraulic ramps on the right of the vehicle -2" kingpin -Central lubrication system with 1 pump, brand BEKAMAX -On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized -Electric cable winch, approx. 5,400 kg pulling force, with radio remote control -Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller -WABCO Smart Board System -4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm Hjdpfx Aaouadk Noasnk

Condition: new, empty load weight: 15,450 kg, maximum load weight: 65,550 kg, overall weight: 80,000 kg, axle configuration: > 3 axles, loading space length: 21,900 mm, loading space width: 2,540 mm, loading space height: 925 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4 Loading area: Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support. Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length. Axles and tires: BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering. 1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Manufacture of our choice Sockets and lighting: 24-volt lighting system Design in accordance with EU regulations ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallization Complete steel construction shot blasted, then hot-finished with ZINACOR 850 Paint: 6-K final treatment: Complete steel construction shot blasted after welding 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax Accessories: Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide Hsdperigw Rsfx Aaaonk 2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle 1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2 Removable protection around the central lubrication pump(s) Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member Manual and description One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.

Condition: new, maximum load weight: 38,100 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 13,100 mm, loading space width: 2,480 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5 3PMSF, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading area: 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: JOST seat posts with 2-speed gearbox for 24 t lifting capacity Hnodpfetphtmsx Aaask Axles and tires: BPW axles, two axles rigid two axles self-steering, air-sprung, with drum brake, with raise/lower function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 205/65 R17.5 3PMSF Brake system: WABCO brake system in accordance with EU regulations with EBS-E Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component Top coat single color in MB 7350 nova grey No metallic paint finish possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 Yellow-red air couplings on the galvanized connection strip at the front 4 brake shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights Galvanized folding supports under the bevel of the cargo bed A holder for a rotating beacon at the rear of the trailer Height-adjustable tarpaulin body Galvanized bulkhead with a tensioning mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof can be moved forwards on ALU roof rail profiles bolted to the front and rear wall 3 pairs of sliding stanchions in the loading area The body can be hydraulically widened at the rear to the left and right by approx. 750 mm Sliding roof with pivoting portal support Sliding tarpaulin with 700 mm reserve in length, with tension belts at approx. 600 mm intervals Height top edge of body approx. 3,960 mm Driving with the sliding tarpaulin open is not permitted and will damage the tarpaulin Suspension strip for ALU docking lights at the rear of the vehicle A holder for the warning signs including socket on the gooseneck and on the rear panel on the left and right respectively A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load condition Rear body closed with ALU hinged doors A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping BEKAMAX central lubrication system with NLGI-2 standard grease and removable protection around the pump Speed sticker 80 km/h at the rear and on both sides Load manometer to determine the axle loads including load diagram

Condition: new, empty load weight: 34,500 kg, maximum load weight: 106,700 kg, overall weight: 141,200 kg, axle configuration: > 3 axles, loading space length: 7,150 mm, loading space width: 2,850 mm, loading space height: 580 mm, tire size: 285/70 R19.5, color: grey, operation weight: 34,500 kg, Equipment: ABS, Gooseneck: -Gooseneck hydraulically raises/lowers and can be removed -Length approx. 3,650 mm -Extensive lashing positions -For tractor units: 6 x 4 or 8 x 4 3-axle compact front chassis: -Hook attachments at the front and rear -Chassis length x chassis width approx. 3,560 mm x 2,850 mm Hnedpfjwhywfex Aaask -Extensive lashing positions Excavator bridge "BB-A": -Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear -Length x base width approx. 7,150 mm x 2,850 mm -Beam height x beam width approx. 430 mm x 1,350 mm -Loading height 580 mm with ground clearance 150 mm -5 pairs Hanging lashing rings (LC 10,600 daN) -4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-axle rear chassis: -Mechanical bolt-on coupling for attaching a drop-bed at the front, end cross member at the rear -Chassis length x chassis width approx. 6,840 mm x 2,850 mm -Extensive lashing positions Pendulum axle and tires (front and rear chassis): -"PENDULUM AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and cotter pins for securing in the raised position -Final painting of the axles with two coats of 2-component paint, painted in MB 7350 Nova Gray -Technical axle load: 14,640 kg (62) km/h) -Hydraulic axle compensation -Axle tool -Tires 285/70 R19.5 Steering: -Steering can be operated from the front and rear using a cable remote control with push buttons, with axle alignment control -Socket for operating the steering on the gooseneck -Cable remote control with push buttons including axle alignment control Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -Steel bulkhead, approx. 400 mm high -4 wheel chocks with brackets -2 spare wheels 285/70 R19.5 -3.5" kingpin -Gallows with winch for spare wheel on the front of the gooseneck -Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must have a capacity of at least 80 liters. Couplings -White reflective tape in accordance with EU regulations on the sides and extension, red at the rear -Aluminum side walls and rear wall, approximately 400 mm high, anodized, attachable to the gooseneck -Operating lever on the gooseneck protected by a hinged cover -A separate air connection with an air gun on the gooseneck -Bekamax central lubrication system with NLGI-2 grease, 1x on the gooseneck, 1x on the 3-axle chassis, and 1x on the 5-axle chassis -Variomax tool kit -Multi-coupling hydraulic connections in the area of the low-bed hook receptacle -Front chassis with a separate air connection for pneumatic screwdrivers -Screw-in option (ø 40 mm) every approximately 500 mm on the outside of the upper chord of the outer tube of the excavator bridge for screw rings -Foldable extensions with steel mattresses, adjustable in width from approximately 2,850 mm to approx. 3,250 mm -Steel mattresses with rubber flooring, approx. 12 mm thick -Two stainless steel toolboxes (855 x 340 x 390 mm) -Radio remote control for the steering in addition to the cable remote control -Painted sand layer as anti-slip protection -1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Condition: new, empty load weight: 8,490 kg, maximum load weight: 40,510 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,490 kg, Equipment: ABS, Chassis: - Sturdy welded steel frame construction with front frame kick-up and flat loading area with rear bevel approx. 500x100 mm - 200 mm gooseneck with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of rear slope) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame for lashing with tension straps - Reinforced frame design / concentrated load at center of gravity - Provisions for extendable widenings in the loading area - With excavator trough (without cover), approx. 220 mm deep, approx. 600 mm wide, starting approx. after 2nd axle up to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), approx. 400 mm deep, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended rear closing plate - Drop-leg supports at rear Floor: - 35 mm larch wood floor with aluminium omega profiles Axles, Steering, and Tires: - BPW air suspension axles, 10 tons axle load each, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with total lift approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle as lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on trailer Hnodpfjwu A Slex Aaask - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with offset centered - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-actuated parking brake - Air connection yellow/red Paintwork: - Steel shot blasting, chassis spray-galvanized and primed - Paintwork chassis/wheel hubs/outer frame in DB 7350 Novagrey Accessories: - Removable side boards and rear wall on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in closing plate - 1 plug-in ECE plate at the rear - 11 pairs ZK modules 10t, mounted laterally: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lights each, mounted at the front on landing gear and at rear before closing plate, infinitely extendable up to a loading width of 4,500 mm - 4 plug-in holders for warning signs in stake pockets on the loading area - 6 pairs of lateral stake pockets for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on gooseneck from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on loading area from outer frame to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in the loading area with container locks for one 20ft container - Rubber skirt mounted on underrun protection - Preparation (=cable routing for NATO cable and hole pattern for subsequent installation of NATO socket at the front of the closing plate as well as holder on the vehicle) for later mounting of electrohydraulic unit on the right rear in direction of travel for potential operation of drive-on ramps - Mechanical 24t landing gear with single-side operation and load compe

Condition: used, maximum load weight: 75,700 kg, overall weight: 93,200 kg, axle configuration: > 3 axles, first registration: 06/2008, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 885 mm, tire size: 245/70 R17.5, color: beige, Year of construction: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Angled at 10°, front corners at 45° (1,080 mm long, 190 mm high bevel at the gooseneck end) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Clearance radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - 1-piece aluminium sideboards, 400 mm high, closed on 3 sides incl. rear board, stanchions foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Simple telescopic extension, continuous over the running gear - External/internal tube construction with 1,090 mm fixed loading platform at the front - (L x W) 8,700 mm x 2,550 mm, extendable by 6,700 mm to a max. of 15,400 mm - Steel plate flooring - Locking of extension stages by spring-applied cylinder and tapered pin - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stanchion pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steered axles - Axle brand SAF - Track width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel/wood Rear of vehicle: - Design: "Bevelled" (600 mm long, 10° bevel) - 1,000 mm rear overhang from center of last axle - Detachable ramp eye on rear crossmember - Mechanical support for stabilisation during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Ramps: - Two-piece access ramps with lengths of 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting device - SuperGrip rubber flooring - Climbing strips on outer side of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to a maximum outer width of 2,790 mm or minimum inner spacing of 480 mm - Integrated mechanical locking system in ramp lift cylinder for ramp safety during transport - Mount for warning beacon Hydraulics: - Hydraulic connection for tractor unit (1 set), connections for tractor, hydraulic pump in tractor unit with max. 60 l/min flow - Hydraulic emergency hand pump - Electro-hydraulic power pack Trailing steering: Hsdoxp U Tzjpfx Aaasnk - Trailing steering bottle for manual steering of trailer axles via cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at the front of the gooseneck, plug-in type, galvanized - Stanchion holder on the gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm - Widening including extension boards, attachable extension at vehicle rear - 1 pair wheel chocks with holder - 1 spare wheel - Central lubrication system with 2 lubrication pumps - Single-color paint finish, RAL-1001 Beige