Roll off trailer

HÜFFERMANN 2-ACHS-MINI-CARRIER MULTIFIX verzinkt NEU BPW

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: Lasdpotplv Tsfx Aldjc * LED tail lights * 15-pin power socket * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection bumpers * Mechanical drop supports at the rear ----Container / Lowbed Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide the roll containers * Steel floor with wheel recesses in the bogie area * When transporting roll-off containers: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking system and mechanically insertable guide angles at the front of the tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoting stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements to secure skips by force and form closure * 4 cloverleaf-style lashing cleats per side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the run-up area of the ramp * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape at the sides & rear * Axles, slewing ring, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Permissible gross weight technically possible: 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and interim sale subject to change ----Delivery Time: * Available from approx. week 47/2026

Condition: new, maximum load weight: 10,510 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 2,550 mm, loading space height: 1,030 mm, loading space volume: 10 m³, total width: 2,550 mm, total height: 1,030 mm, Year of construction: 2025, Equipment: ABS, WhatsApp: CENTRAL AXLE MINI CARRIER TRAILER - "HÜFFERMANN" Cargo For transporting skip containers according to DIN 30720 Weights GVW (permissible): 13 t GVW (technical): 13 t with 1 t support load Dimensions Frame length approx. 3,500 mm, for a skip container up to 10 m3 Max. width: 2,550 mm Container resting height approx. 1,030 mm Frame Type HTM-3 1335 with Safetyfix consoles, single tires Welded high-strength steel frame construction Chassis for skip containers, front and rear loading possible Combined load securing, side centering Fix At the front: one pair of plug-in wedges with pendulum shoes Prepared for chainless “Multifix” load securing and for chain tension system “Safetyfix” Without frame cover 2 pairs of 6.3 t bolted lashing eyes on the outer frame Safetyfix skip securing for one skip container 2 manual ratchet lashing devices Length-adjustable chain sling with one ring eye for diagonal lashing of the skip container over the rear container mounting lug 2 galvanized steel toolboxes for lashing chains Short drawbar with bolted 40 mm towing eye, exchangeable/height-adjustable +/- 200 mm, for front and rear loading Support Equipment 1 mechanical steel landing gear with hand crank at the front, left-side operation 1 drop-down support at the rear frame 2 SAF axles with drum brakes, S-cam 300/150 mm, axle load 6.5 t, E tires, automatic brake adjusters Axle spacing: 1,260 mm 4 tires: 285/70 R 19.5, 143M, make: CONTINENTAL Lodpfexq Ic Ssx Aldoac Steel rims 8.25 x 19.5, no offset, silver Braking System/Suspension Brake system according to EU Directive 71/320 or ECE R13 Two-line air brake system EBS system 2S2M, 2nd axle force-sensing, make: KNORR Electronic braking and stability system EBS-E and RSS, or TEBS G2 and RSP Spring-applied parking brake on 2nd axle Aluminum air reservoirs Brake/air connections with EU or Duomatic quick couplings EBS/ABS connection cable Bracket for EBS/electric plug at the drawbar Air suspension with lifting and lowering device Automatic setting to programmed ride height above 15 km/h Assistance/Safety Systems SWIT - Schwarzmüller Intelligent Telematics Weight detection/axle load display via EBS CAN bus signal for indication on in-cab display (truck must be appropriately equipped, not a certified scale) Tire pressure monitoring according to ECE Directive 141 Lighting/Electrics 24-volt lighting system according to EU Directive 76/756/EEC 2 PART LED module tail lights, HELLA 2 front LED position lights 2 rear LED outline marker lights Flashing LED side marker lights, triggered by indicator signal LED license plate light 1 x 15-pin connector 2 additional LED reversing lights, left/right Paintwork Shot-blasted, arc-galvanized, epoxy primer, 2K topcoat applied by electrostatic process Overlapping joints and transitions treated with cavity wax Chassis, drawbar/draw tube: RAL 7021 black-grey Load securing elements: RAL 1003 signal yellow Underrun protection: galvanized Side collision protection: anodized Plastic parts: black, unpainted Powder-coated add-on parts: black Hot-dip galvanized add-on parts: unpainted Signage # legally not required for vehicles ... (incomplete)

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 Laedpfx Ael Thwcsldec * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: new, power: 132 kW (179.47 HP), number of beds: 4, number of seats: 4, fuel type: diesel, gearing type: automatic, color: white, total length: 7,890 mm, total width: 2,320 mm, total height: 2,920 mm, overall weight: 4,500 kg, empty load weight: 4,040 kg, maximum load weight: 460 kg, wheelbase: 445 mm, Equipment: ABS, cruise control, fog lights, immobilizer system, traction control, Highlights: * Face 2 Face Safety: * 3rd brake light * ABS * Anti-slip regulation (ASR) * Electronic stability program (ESP) * Rear view camera * Summer tires * Immobilizer * Passenger airbag * Driver airbag Lighting: * LED headlights * Fog lights Comfort: * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * Driver's seat height adjustable * Automatic climate control * Leather steering wheel * Multifunction steering wheel * Multimedia system * Cruise control * Central locking with remote control Radio/Navigation: * Bluetooth hands-free system * DAB+ digital radio * Hands-free system * Navigation system * USB connection Camper-specific: * Alcove/lift-up bed * Double floor * Single beds * Rear garage * Awning * Side seating area * Separate shower Other: * Alloy wheels Further description: Furniture décor "Navarra", upholstery "Pisa", décor "Lasca", Luminary package Integra 2-axle, navigation system with dual-lens RF camera, steering wheel with controls, pre-wiring for solar system, driver's cabin carpet, Fiat automatic transmission, 16" alloy wheels, exterior graphics carbon, chrome elements front/rear, LED turn lights, LED fog lights, flat screen holder front, flat screen pull-out rear, organization system rear garage, sound system, automatic climate control, leather steering wheel/gear knob, charging station Mobiltel, wireless, heat exchanger, comfort seats driver's cabin, Luminary-Plus package Integra 2-axle, multifunction socket, outdoor shower (cold/warm), gas outdoor socket, windshield wipers with winter parking position, rain sensor, lithium battery, awning 5.5 m, heated windshield, underfloor camera for tank emptying, document fee. Lasdpfx Alov Dnd Hjdsc ---- * We make every effort to describe the offered vehicle as accurately as possible. However, errors cannot be completely ruled out. Therefore, please address our sales staff specifically if you place particular importance on a specific feature. * Subject to prior sale and errors. ---- Model/Year of construction: 2024, New TÜV (technical inspection): yes, Internal ID: N0041660, Engine details: Euro6dT Final 8, Transmission: Automatic, Overall length: 789 cm, Unladen weight: 4040 kg, Payload: 460 kg, Sleeping areas: Rear (195x80) Rear (200x80) Lift-up bed (193x150), Seats with belt: 4, Wheelbase: 445 cm, Trailer load (braked): 1500 kg, Trailer load (unbraked): 750 kg, Heating: Alde WW heating, Refrigerator volume: 157 l, Freezer volume: 15 l, Fresh water tank: 140 l, Fresh water tank (incl. boiler): 160 l, Waste water tank volume: 100 l, Charger: 18 A, Battery: 100 Ah, Upholstery: Fabric, 230V sockets: 3, 12V sockets: 1, Additional features: New TÜV, CHASSIS: ASR, ABS, Fog lights, Central locking/remote control, Torque converter automatic, Electrically adjustable exterior mirrors, Jack, Fix & Go Kit, Multifunction steering wheel, Alloy wheels, Immobilizer, 3rd brake light, Cruise control, Heated exterior mirrors, Diesel tank 90 l, ESP incl. Hill-Holder, Driver airbag, Passenger airbag, BODY: Electric step, One-piece entrance door with window, Remis darkening side left+right, GRP body, Roller blind for windshield, Fly screen entrance door, Third brake light, Awning light, Opening windows all around, Awning, Garage door, Gas box, Window frames, Midi-Heki, Waste bin in door, INTERIOR: Cassette roller blinds, Fly screen entrance door, Front roller blind with electric drive, Fixed bed, KITCHEN: Extractor hood, AES refrigerator, 3-burner stove, Waste bin, SANITARY:

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as low-bed trailer ----Brake system: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lower system as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and adjustable-height coupling ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V Lodpfx Alol Tq Nmjdjac * 15-pin power connector ----General accessories: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Container net storage box made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Foldable A-sign at the rear ----Loading platform: * Main frame with raised outer rails for guiding roll containers * Steel floor plate with roller recesses in the bogie area * Container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp lock as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the slope area * Mechanical drop-down supports at the rear ----Load securing: * 1 pair of 10 t UVV lashing rings at the front bulkhead support * 3 pairs of 10 t UVV lashing rings on the side in the outer frame * Each side: 4 x 2 t cloverleaf-type lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking components, rear drop supports hot-dip galvanized * Drawbar, axles, and air tanks painted in black tone ----Info: * New vehicle without initial registration, with full manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 43 / 2026

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Gross weight approx. 18,000 kg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials Ljdjvynaaspfx Aldsac 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * Tire pressure monitoring system (TPMS) ----General attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Mechanical drop supports at the rear ----Container / Low loader platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Suitable for transport of roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking and mechanically insertable stop angles at the front in the guide rails * Loading certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 adjustable skip stops for lateral centering; the front 4 stops are inserted with a pendulum stop ----Load securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and frictional securing of skips * 4 cloverleaf lashing slots on each side and 1 pair of 13.4 t UVV lashing rings facing forward * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg Laedpfepk D Awjx Aldjc ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Technically permissible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. calendar week 47/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear Lsdpfopk D Iiox Aldoac ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm draw eye & height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Accessories: * Toolbox made from powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper pads * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical pin-in end stops at the front of the rails * Load certification to DIN 30722 - 1 * Transport of up to 2 skip containers with a max. volume of 10 m³ each possible * Includes 8 repositionable skip stops for lateral centring of the skips, front 4 stops with pendulum stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in tensioning elements for both positive and non-positive securing of the skips * 4 lashing bars in cloverleaf design (on the sides) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded seam as anti-slip surface in the ramp track area * 1 pair of aluminium loading ramps (16 t / pair) 2,800 x 400 mm suitable for rubber-tyred and chain-driven vehicles (lockable storage compartment access from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape on the sides & rear * Axles, turntable, drawbar, and air tank painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 47/2026

Condition: used, machine/vehicle number: 304, empty load weight: 3,840 kg, maximum load weight: 14,160 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1999, loading space length: 7,800 mm, loading space width: 1,800 mm, suspension: steel, tire size: 235/75 r17,5, wheelbase: 5,900 mm, color: black, Equipment: ABS, Drum brake SAF axles Pneumatic load securing pneumatic Lajdpfx Aljpiav Ssdec Lowerable drawbar loading sill height 1,150 mm Errors excepted

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning panel packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable warning beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (no stakes included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper) * Widening boards stored in the center of the load platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for later retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment * Load platform over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black finish * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible gross weight technically up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf Lasdpfol Thxdjx Aldjc