Used Other Low Loader / Lowbed Trailers for sale (616)

Condition: new, overall weight: 750 kg, maximum load weight: 624 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,080 mm, loading space height: 360 mm, Item No.: 015.005.043 Crelnjwafbyj T Tfdjb Stock vehicle 2022 Central tube square drawbar 13-pin plug Special screen-printed floor Double-walled aluminum side walls (anodized) Smooth-running side wall installation locks 8 lashing brackets 4 corner stanchions for attaching additional attachments Sturdy compact support wheel Folding front and rear walls Rear suspension cables Perforated railing (red) mounted on the left and right sides of the side wall

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,600 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem Low Loader - Drive-over Platform Trailer NEW VEHICLE including COC * Gross vehicle weight: 21 t, NL: 16.60 t, galvanized chassis * Available from April 25, 2025 * Platform version with 400 mm high bulkhead, ramp secured by ramp support rods and inclined supports Csln Tovw Hvze Tfdsrb * 21 t gross vehicle weight version. Reinforced frame and axle, and axle spacing 1,810 mm, * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000 mm loading area with 400 mm high bulkhead, * Extended ramps: 3,000 mm hot-dip galvanized, one-piece ramps with hot-dip galvanized gratings, * Ramp jack with vertical, adjustable springs for easy one-person operation * La-Si package: 4 UVV-compliant drop lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame (approx. 5 mm protruding), arrangement: each indented approx. 1,000 mm from the front and rear beams * 10 UVV-compliant 3,000 daN lashing brackets, retractable into the existing hole pattern in the outer frame, * Softwood floor, 50 mm. Two UVV-compliant lashing rings each, recessed into the cross member at the front and rear, with a LC of 10,000 daN. * Additional lashing options are provided through holes (Ø 50 mm, LC of 1,200 daN) in the front and rear beams. * Device for retrofitting container locks * Gigant air suspension including EBS 2S/2M * Lifting and lowering * 235/75R 17.5 (8-piece) twin tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, on the right side in the direction of travel * LED lighting system * 7-pin socket on the rear side, used for overlength lighting with taillight (58 R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Warning sign for overwidth * 1 removable rotating LED beacon including bracket and installation * Folding outriggers at the rear, support leg at the front with geared winch * ---- Rent-purchase example from our cooperation partner MMV Leasing: €639 per month net for a 60-month term with no down payment and €0 remaining Other terms with / without down payment / Residual value possible! We are a MüllerMitteltal retail partner ----* Our opening hours * Mondays - Thursdays: 8:00 AM - 5:00 PM * Fridays: 8:00 AM - 3:00 PM * Outside of opening hours, we are available by appointment * We speak German, we speak English, we speak Polish, we speak French * Leasing, financing, and trade-in are available

Condition: used, overall weight: 6,500 kg, maximum load weight: 4,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, first registration: 07/1979, next inspection (TÜV): 04/2026, Year of construction: 1979, total width: 2,500 mm, total height: 3,000 mm,

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,250 kg, axle configuration: > 3 axles, Year of construction: 2025, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board for load weight determination * Warning sign packages front and rear * Reflective contour strips on the sides and rear * Rotating beacon (removable) at the rear * LED light * Straight towing hook with 50 mm towing eye and continuously adjustable height * Powder-coated sheet steel toolbox and basket-style spare tire holder on the right side * Front closed Plastic single fenders * Straight steel mudguards at the rear, each with splash guards (spray suppression) * Side impact protection * Front end of the bogie platform extended by 520 mm with 45° corners and 3 recessed storage compartments including a lid, and lockable * Chassis made of high-strength fine-grain steel * Floor above the bogie platform made of 50 mm and in the low-loader platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes provided) with simultaneous 2-ton lashing option * Lasi package consisting of: 2 6.4-ton lashing eyes at the front left and right on the main frame of the bogie platform * 2 pairs of 13.4-ton lashing rings on the outer frame at the front and rear, and 4 pairs of 10-ton lashing rings on each side. Can be pivoted and lowered * Load-bearing capacity in all directions and embedded in the outer frame * 2 pairs of 6.4-ton lashing rings mounted on the side of the excavator boom rest * 8 pairs of galvanized folding booms for a total width of 3 meters (but not in the rear slope) * Widening planks stored in a storage compartment on the left side * Excavator boom rest above the rear axle to the end of the approach slope, approx. 2,100 x 740 x 190 mm * Mechanical drop legs at the rear * Hydraulic folding ramps with hydraulically extendable tip section, approx. 4,650 x 720 mm, including hydraulic lateral ramp adjustment and load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height (max.) Approx. 890 mm, +/- 20 mm (including 860 mm approach slope) * Flow divider installed * Chassis, bogie, loading ramps, folding boom, and mechanical drop supports hot-dip galvanized * Axles, drawbar linkage, air chamber, and turntable painted in a single black tone Csln T Tsl Tphrofdjrb * Tires 235/75 R 17.5 * New vehicle, not first registered, with manufacturer's warranty * Errors and prior sale subject to change * Available from week 20/2025

Condition: used, empty load weight: 18,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space height: 800 mm, first registration: 03/2017, suspension: air, tire size: 205/65 17,5, color: green, Year of construction: 2017, Equipment: ABS, hydraulics, Very nice 3-axle low-loader Crjln Tov Ulx As Tfdjb with hydraulic steering, hydraulic ramps, extendable to 3 meters, cable winch, and its own hydraulic pump powered by NATO electricity.

Condition: used, overall weight: 3,500 kg, maximum load weight: 2,650 kg, axle configuration: 2 axles, loading space length: 3,550 mm, loading space width: 1,700 mm, loading space height: 250 mm, first registration: 11/2019, Year of construction: 2019, * NET PRICE * Hot-dip galvanized * Loading ramps * 2 axles with drum brakes * Lashing eyes in the floor * LxWxH: 3.55 x 1.70 x 0.25 * Empty weight: 850 kg * Top condition WhatsApp: Subject to errors and prior sale!! Sale is subject to any warranty!! Csln T Tjvfiwkefdjrb - We speak Russian - We speak English - We speak Polish

Condition: used, axle configuration: 3 axles, first registration: 01/2022, Year of construction: 2022, Additional information : Brand: MCCAULEY Model: MAC-TLL3-33 Structure: low loader ( platform L=8500 / W=2541 / H=700 mm ) Year: NEW Suspension: air Brakes: drum Dimensions: L/W: 10000 mm / 2541 mm Masses: full/empty: 30000 kg / 7000 kg Crelnour T Rde T Tfdeb = More information = Empty weight: 7.000 kg Carrying capacity: 23.000 kg GVW: 30.000 kg Dimensions (LxW): 1000 x 255 cm Please contact Aigar Aasmann for more information

Condition: good (used), Functionality: fully functional, overall weight: 20,000 kg, empty load weight: 3,700 kg, maximum load weight: 16,700 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, first registration: 11/1989, next inspection (TÜV): 06/2025, suspension: parabolic leaf (spring), tire size: 265.70 r 19.5, ground clearance: 1,000 mm, color: red, Year of construction: 1989, Equipment: center pivot plate, trailer coupling, Bartoletti lowered trailer, 1m from the ground, 2 axles with mechanical suspension, total length 8.50m, 6.70m loading platform, 60cm high aluminum sides, 265.70 r 19.5 tires, inspected until 06.30.2025 - INTERDRIVE SRL DEALER - PARMA Crslnev Ub Exo T Tfdob

Condition: excellent (used), Functionality: fully functional, overall weight: 40,000 kg, empty load weight: 7,600 kg, axle configuration: > 3 axles, first registration: 08/2020, suspension: steel, tire size: 235 / 75 R 17.5, Year of construction: 2020, MÜLLER MITTELTAL T4 PROFI 40.0 (LOW LOADER) MÜLLER MITTELTAL T4 PROFI 40.0 Item number: - Manufacturer number: - Internal number: - Available: 1 unit Manufacturer: MÜLLER MITTELTAL (Used) Type: T4 PROFI 40.0 First registered: 08/2020 Serial number: WMM00000L0XXXXX Total weight: 40,000 kg Own weight: 7,600 kg Payload: 32,400 kg Tires: 235/75 R 17.5 / Continental / HTR2 (9 mm) External dimensions: 2600 + 390 + 6780 x 2520 GROSS PRICE INCLUDES 19% VAT. VAT IS DEDICATED. DELIVERY POSSIBLE Special equipment: Accessories: 4 wheel chocks with clamping device, 1 rotating beacon, 1 warning package, 16 folding booms with planks. Hot-dip galvanized hinged lid for the toolbox in the bogie platform. Removable rotating beacon (hazard warning light), incl. bracket and installation. Warning package for exemption according to § 70 StvZO (German Road Traffic Licensing Regulations). Mechanical compensation unit with parabolic springs, galvanized folding booms at the front and rear (8 pairs) and wooden planks for widening. Plank holder under the chassis. Excavator boom storage over the rear axle continuously up to the end beam, total length 2,300 mm, cross member tapered at the ramp, width top/bottom approx. 740/400 mm, height 190 mm. Axle make. GIGANT La-Si package: 2 LC 6,400 daN lashing rings on the front left and right of the DG platform on the main frame. 8 LC 10.000 UV lashing rings for swiveling the small boom, 2 plug-in elastic rings, 2 pieces. Low-loading platform, 2 in front of the 3rd axle, 2 between the rear axles 2 pairs of LC 6400 daN lashing rings in the excavator boom storage area on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the slope, permanently welded, suitable for galvanization Front extension in front of the bogie platform by approx. 520 mm with 45° corners, with 3 storage compartments including cover, hinged lid opens to the rear, lockable Motor-hydraulic ramp jack (vertical cylinders) including load-holding valve. The hydraulic pump capacity in the truck. Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 L/min. up to max. 140 L/min.) Hot-dip galvanized chassis and bogie. Lashing rings LC 13.400 in bolted design. Drawbar, slewing ring, axles with springs, and air tanks in a black shade. With a platform length of 6780 mm, larch wood flooring instead of spruce/fir on the low-loading platform per run. Meter ABS system instead of EBS, with ALB control on the 2 3 3 / E 3 5 - S t C C H V e r D i n d u n g a c h 1 s o 7 6 3 9 Coln Tov Sm Nds Tfdsrb ( not permitted with air suspension) 2 LED reversing lights on the rear of the trailer, switched on with reverse gear, max. 2 additional units permitted Hardwood 50 m on ramp, heavy series 3,000 % 720 mm

Condition: used, overall weight: 20,000 kg, empty load weight: 5,380 kg, maximum load weight: 14,620 kg, axle configuration: 2 axles, first registration: 02/2015, next inspection (TÜV): 03/2026, suspension: other, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, * Platform L = 8.00 m * Loading ramps Crjln Tev Tqz Hs Tfdsb * Leaf spring suspension ... Anti-lock braking system (ABS), leaf spring suspension, 1st owner, used vehicle, incl. VAT.

Condition: used, overall weight: 24,000 kg, maximum load weight: 15,700 kg, axle configuration: 3 axles, first registration: 09/2015, Subject to errors and prior sale! Internal number: 1460. 1004657----* Trailer for truck Fliegl DTS 300 with offset * HSN / TSN 7591 11A 000 * Color: matt black * Empty weight (kg) 8,300 * Gross vehicle weight (kg) 24,000 * Payload (kg) 15,700 * Body type: low loader Coln Tev Tg Hxe Tfdsrb ----The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 02/2008, Humbaur 3-Axle Low Loader - Preparation for widening - Unladen weight 6,920 kg - Expired TÜV and SP - SAF axles - Tires: 285/75 R 17.5 - Drum brakes Crjln T Tfoudub Hodjb Subject to errors and prior sale. Internal vehicle number: 9898

Condition: used, overall weight: 40,000 kg, maximum load weight: 29,100 kg, axle configuration: > 3 axles, first registration: 06/2013, Equipment: ABS, Fahrzeug-Ident-Nr.: W09TA4010D0M49982 hydraulically adjustable 2-piece ramps, cranked drawbar, rubber coating, widenable, wheel recesses Unladen weight: 10,900 kg - Payload special equipment: approx. 29,100 kg Front platform: 2,450 x 2,540 mm Drop deck: 7,800 x 2,540 - Loading height approx. 920 mm Drawbar cranked (eyelet 50 mm) Overall dimensions (LxWxH): 12,000 mm BPW Eco Plus axles - Drum brakes - Technical axle load: approx. 10,000 kg Air suspension unit Long removable wheel recesses - Depth 250 mm Excavator bucket trough Cjln T Tsvg T Upjfdsrb Ramps 2-piece approx. 2,400 + 1,500 x 8,100 mm hydraulically height-adjustable Tires: 235/75 R17.5 inch

Condition: new, overall weight: 7,500 kg, maximum load weight: 5,600 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,000 mm, loading space height: 330 mm, Year of construction: 2024, Equipment: ABS, * Drum brakes * Ramps spring-supported & can be moved sideways * Frame completely hot-dip galvanized * 18 lashing rings recessed in the bridge floor * Loading height approx. 630 mm * Height-adjustable tow arm Creln T Tfjmw U Abedob * Trailer available immediately * Suspension: leaf * Payload: 5,600 kg * Tires: 215/75R17.5 ----Information non-binding - errors not excluded - sale reserved

Condition: used, overall weight: 20,000 kg, empty load weight: 5,100 kg, maximum load weight: 14,900 kg, axle configuration: 2 axles, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 900 mm, first registration: 02/1997, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf spring suspension, lashing eyes, mechanical ramps, rear support, side aluminum undercarriage, twin tires. Construction: 2-axle low-loader trailer with mechanical ramps, 2x SAF axles, drum brakes! Loading height approx. 900mm! Ramp length approx. 2650mm! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! Celn T Tov R Hmajfdorb - .

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/1998, total width: 2,500 mm, total height: 1,550 mm, ROR axle(s), drum brake system, air suspension, support winch(es), trailer for mobile crane - counterweights/counterweights Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Creln T Tfolbl Taodjb We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: new, Functionality: fully functional, overall weight: 1,000 kg, empty load weight: 187 kg, maximum load weight: 813 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 350 mm, Year of construction: 2024, New model, braked single-axle low loader with aluminum drop sides. Rear dropside can be folded down. Lashing eyes on the side of the loading floor. Groove profile in dropside for attaching rope hooks and S-hooks. 13-pin electrical system, plastic mudguards plus vehicle registration document and freight to Gera € 100 net Celnsuyg Ugs T Tfdjrb Optional accessories at an extra charge: cover can be folded backwards/sideways, equipment for 100 km/h approval, H-frame leaf grid, tarpaulin and bows, flat tarpaulin and much more. Exemplary pictures

Condition: used, overall weight: 12,000 kg, maximum load weight: 9,100 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space height: 900 mm, first registration: 07/2018, next inspection (TÜV): 01/2026, total width: 2,550 mm, Total length: 8,830 mm Loading length: approx. 6,000 mm Width: 2,550 mm Loading height: 900 mm Further information - Chassis and platform frame with support arms, sturdy welded steel ladder frame construction - Hot-dip galvanized vehicle - Lashing hole outer frame with 30 mm holes, 100 mm spacing - Mount for 20" containers and swap bodies up to 7,450 mm - 2 pairs of removable guide rollers - 27 mm silk-screened floor - Anti-slip silk-screened loading floor - Side and rear underrun protection - 2 rubber bumpers at the rear - BPW axles with long-stroke air suspension Colnev Nfx Sj T Tfdjrb - 245/70R17.5 tires - Plastic toolbox - LED reversing lights

Condition: used, axle configuration: > 3 axles, first registration: 10/2001, suspension: steel, color: other, Year of construction: 2001, Equipment: tail-lift, Langendorf TUE 32/2-2, 2001, SAF axles, leaf-spring, ramps, Expanders = More information = Suspension: leaf suspension Empty weight: 9.350 kg Carrying capacity: 26.650 kg GVW: 36.000 kg Height: 86 cm Registration number: Duits = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! Croln T Tou Ut Tpsfdob - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, overall weight: 3,500 kg, maximum load weight: 2,600 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 1,810 mm, loading space height: 420 mm, Excavator transporter Model Builder III 3500 kg 400 x 180 cm 3 axles Inside box dimensions approx. 400 x 180 cm GVW 3500 kg, payload approx. 2600 kg Loading ramp approx. 1500 mm long, ramp angle only approx. 17° Actual weight of the vehicle: approx. 900 kg Tires: 5 50 R The Model Builder III is the ideal transporter for transporting various small digging machines and other mobile machines. Since the loading floor is between the wheels, this trailer has a very low loading area (45 cm.). In addition, the basic version is equipped with a solid folding support wheel, the TÜV-tested load securing system from Temared with the binding rings integrated in the side edge, a spoon rest on the front, a steel ramp over the entire width (150 cm high) with a gas pressure spring, supports, playpen profiles and robust locks. Of course, this Temared trailer also has a completely welded, fully galvanized chassis with a V-drawbar. NEW PRODUCT - Incl. invoice with VAT, braked 2 years TÜV/unbraked 3 years TÜV and 2-year guarantee. The vehicle documents can be sent in advance after the deposit or payment has been made so that you can register the trailer for collection. Some images do not correspond to the basic equipment Subject to errors and changes Collection from the main office Engelhard trailer wholesale market Steinauer Weg 15 91589 Aurach Tel: Fax: 9 Homepage: If desired, the handover can also take place in 06618 Wethau, (Gmach company) collection warehouse OST near Leipzig Tel. , Fax for an additional charge of 150.00 euros (if in stock there!). Coln T Tjmt Etmjfderb The handover fee is to be paid directly on site IMPORTANT! - If you would like to have the item picked up in Wethau, please call us beforehand to check availability! Opening times: Monday - Friday 8.00 a.m. - 12.00 p.m. and .00 a.m. - 5.00 p.m. Saturday 9.00 a.m. - .00 p.m. Outside of these times, you can also send your enquiries at any time by fax 9.

Condition: used, overall weight: 40,000 kg, maximum load weight: 30,800 kg, axle configuration: > 3 axles, loading space length: 9,370 mm, loading space width: 2,500 mm, first registration: 12/2004, next inspection (TÜV): 01/2025, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, Low bed length approx. 6,000 mm, can be extended to 3,000 mm, foldable extensions, bed loading height: approx. 920 mm, raised bed 2,200 mm, front slope 370 mm, rear slope: 800 mm, hydraulic loading ramps can be moved sideways, 1 divided (LxW) 3,650 x 700 mm, 5 x stake pockets per side, 3 x heavy-duty lashing rings per side, 4 x lashing brackets per side, 50 mm towing eye, extendable warning signs, 1 x rotating beacon, BPW Eco axle(s), drum brake system, leaf spring suspension, spare wheel holder under the body, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! The vehicle may have advertising on it and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Crelovnkxuen T Tfdsb Please contact us!

Condition: used, overall weight: 22,000 kg, maximum load weight: 16,050 kg, axle configuration: 3 axles, loading space length: 7,750 mm, loading space height: 900 mm, first registration: 05/1979, total width: 2,500 mm, Total length: 10,800 mm Crslnov Iup Ds T Tfdeb Loading length: total 7,750 mm, drop 2,430 mm, drop 5,320 mm Width: 2,500 mm Loading height: 900 mm Further information - Hydraulic ramps, laterally adjustable - Stanchion pockets - Warning signs front and rear - Twin tires - BPW axles - Eyelets for loading area drop - Eyelets for outer frame

Condition: new, overall weight: 3,500 kg, maximum load weight: 2,600 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,810 mm, loading space height: 420 mm, Model Builder III Excavator Transporter - 3500 kg, 400 x 180 cm SPECIAL PRICE Internal box dimensions approx. 400 x 180 cm GVW 3500 kg, payload approx. 2600 kg Loading ramp approx. 1500 mm long, ramp angle only approx. 17° Actual vehicle weight: 888 kg Tires: 5 50 R C Very stable and robust design at a GREAT PRICE The Model Builder III is the ideal transporter for transporting various small excavators and other mobile machinery. Because the loading floor is located between the wheels, this trailer has a very low loading area (45 cm). In addition, the basic version is equipped with a solid folding support wheel, the TÜV-tested Temared load securing system with tie rings integrated into the side edges, a bucket rest on the front, a steel ramp across the entire width (150 cm high) with a gas spring, supports, playpen profiles, and robust locks. Of course, this TEMA trailer also features a fully welded, fully galvanized chassis with a V-drawbar. NEW - Includes invoice with VAT, 2-year TÜV (braked)/3-year TÜV (unbraked) and a 2-year warranty. The vehicle documents can be sent in advance after a down payment or payment has been received so that you can register the trailer for pickup. Some images do not reflect the basic equipment. Subject to errors and changes. Pickup at our headquarters Engelhard Trailer Wholesale Market Steinauer Weg 15 91589 Aurach Crslnoriaf He T Tfdeb Tel: Fax: 9 Homepage: Upon request, the handover can also take place in 06618 Wethau, (Gmach Company) East Collection Warehouse near Leipzig, Tel., Fax for an additional charge of €150.00 (if in stock there!). The handover fee is payable directly on site. IMPORTANT! - If you would like to pick up the item in Wethau, please call in advance to check availability! Opening Hours: Monday - Friday 8:00 a.m. - 12:00 p.m. and 12:00 a.m. - 5:00 p.m. Saturday 9:00 a.m. - 12:00 p.m. Outside of these hours, you can also send your inquiries at any time by fax to 9.

Condition: used, overall weight: 80,000 kg, maximum load weight: 55,190 kg, axle configuration: > 3 axles, first registration: 12/1984, total width: 3,780 mm, total height: 3,330 mm, Special low loader for heavy transport, payload of approx. 60,000 kg to 80,000 kg depending on use, whether on the road or internally, length of the loading area with slope approx. 12,400 mm, width 3,200 mm, widening to 3,700 mm, hydraulic axle compensation mm, hydromechanical steering on 6th axle (front + rear), 4 x hydraulic support cylinders, hydraulic ramp front + rear, loading possible from both sides, trailer coupling on both sides, ideal for pushing or transporting in tight spaces, vehicle can be covered with advertising and/or labeled Celnjq R Nl Re T Tfderb

Condition: used, overall weight: 13,000 kg, maximum load weight: 9,800 kg, axle configuration: 2 axles, loading space volume: 6 m³, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, first registration: 06/2024, next inspection (TÜV): 06/2025, total width: 2,550 mm, total height: 1,500 mm, Equipment: ABS, 3-sided tipper body, galvanized chassis, drop sides foldable / removable and swinging, galvanized rear stanchions, solid galvanized steel bulkhead and foldable to the front, height-adjustable drawbar, drawbar length 1800 mm, coupling height approx. 660-900 mm, 40 mm drawbar eye, 5 pairs (3000 kg per lashing point) lashing recesses incorporated in the floor, aluminium drive-on ramps (LxW) 3.570x400 mm, max. load capacity pair 8000 kg, weight 55 kg, drive-on angle approx. 15°, loading height: approx. 980 mm, ABS, with ALB function, EBS, SMB axle(s), maintenance-free parabolic suspension with load compensation, support winch(es), vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Color St Shsn T Tfderb Please contact us!