Used Other Low Loader / Lowbed Trailers for sale (606)

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Bodsxvgrispfx Affscu * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – without installation required on truck side * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Front support winch * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm on the right front exterior of the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the front wall for retrofitting container locks * Bolted 400 mm smooth sheet front wall * Bolted rear stanchions * Drop sides with spring assists ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings possible every 600 mm * In each front and rear corner, 1 x 6.3 t lashing point * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece hydraulic grating drive-on ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Hydraulic flow divider in the trailer (for truck hydraulic output above 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical drop supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in a black tone * Drop sides painted RAL 2011 deep orange * Side panels available in a RAL color of your choice for an additional charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Manometer pressure indicator for determining load weight (axles separated into 2 air suspension circuits) * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Pull scissors with 50 mm pull eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section in front of the bogie platform approx. 490 mm long with 45° corners * ROBOT welded ANTI-SLIP coating for the steel plate of the bogie platform * La-Si package consisting of: in front of the front wall support on the left & right 1 x 13.4 ton each. UVV lashing eye, 4 holes on each side in the bogie platform with a lashing force of 2 tons each, 1 pair of lashing eyes (13.4 tons) hanging at the rear left and right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame, 3 stake pockets on each side with a simultaneous 2 ton lashing option * Hot-dip galvanized mechanical folding boom for a total width of 3 meters (but not in the rear slope) * Plank holder for widening under the chassis on the left in the longitudinal direction Bjdpjl Tnu Aofx Affocu * Excavator boom storage above the rear axle to the end carrier approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 tons on each side. Lashing rings in the excavator boom storage * Hardwood floor on the running surfaces of the low-loading platform * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) mechanically laterally adjustable * Outer planks of the ramps made of hardwood * Steel construction in preparation for 6-way control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Bogie, folding boom, mechanical drop supports, ramps hot-dip galvanized * --Axles, air tank, pull scissors painted in a black tone-- * Tires 235/75 R 17.5 * Vehicle has a daily registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted at the front on the right side of the chassis * 15-pin power connector * Multi-chamber tail lights * Bolt-on underride guard * Plastic quarter mudguards * Net hooks at each position of the central locking and 2 hooks on the front wall * Chassis made of fine-grain steel Bcsdpfx Aol Th Dujffeu * Steel pallet 3-way tipping body, continuous side walls at the top with internal pipe reinforcement - without central stanchions, foldable with drop-side spring lifter * Rear stanchions bolted * Combo steel swing doors at the rear, 2-wing asymmetrically split, can be swiveled and locked to 270° - not foldable - with additional pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with opened swing door * Each corner with 1 x 5 ton lashing point and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm steel sheet floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment from the rear recessed under the loading area in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tank and landing gear painted black * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost * Vehicle has a day registration (unused) * Errors and prior sale excepted * Immediately available from Egestorf

Condition: used, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2016, Equipment: ABS, Welcome to Johanning’s Commercial Vehicles, your specialist for young and exclusive used vehicles. AVAILABLE IMMEDIATELY! Delivery possible. Price on request! Financing & leasing available upon request. Location: 39606 Osterburg, incoming stock! Make: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11.9 Year of manufacture: 2016 Operating weight: 3,250 kg Inspection (TÜV): March 2026 Safety inspection (SP): September 2026 Bsdpfx Aoycpd Ajffecu For additional photos or videos, feel free to ask. Johanning’s Commercial Vehicles – your partner for exclusive and young used vehicles. Our services – your advantages: (after purchase) - Trade-in of your vehicle possible (any condition) - Immediate deregistration of your vehicle free of charge - Registration service for €150 (including fees and license plates) - Short-term registration available - Viewing and test drive possible at any time by telephone appointment - Free delivery by arrangement possible. Subject to errors and prior sale.

Condition: used, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 10/1996, Equipment: ABS, Welcome to Johanning's Commercial Vehicles, your specialist for nearly new and exclusive used vehicles. AVAILABLE IMMEDIATELY! Delivery possible. Price on request! Financing & leasing options are available on request. Location: 39606 Osterburg. Incoming! Low-loader Make: Langendorf Model: TUE 24/100-3 Year of manufacture: 1996 Bodpfsycbm Nex Affecu TÜV (inspection): Expired Axles: 3 For more pictures or videos, please feel free to ask. Johanning's Commercial Vehicles – your partner for exclusive and nearly new used vehicles. Our services – your benefits (after sale) - Trade-in of your vehicle possible (any condition) - Immediate deregistration of your vehicle free of charge - Registration service for €150 (incl. fees, license plates) - Short-term registration - Viewing and test drives by appointment at any time - Free delivery to your door by arrangement possible Errors and prior sale excepted.

Condition: good (used), functionality: fully functional, machine/vehicle number: WHD308525N1103145, empty load weight: 6,460 kg, maximum load weight: 23,540 kg, overall weight: 30,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 12/2023, next inspection (TÜV): 11/2026, loading space length: 6,490 mm, loading space width: 2,540 mm, total length: 8,540 mm, total width: 2,540 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R 17.5, tire condition: 80 %, color: grey, trailer brake: trailer braked, Year of construction: 2022, Equipment: ABS, center pivot plate, our vehicle number: #30613 Humbaur HTD 30 85 25 K Low Loader Trailer Hydraulic loading ramps 3,100 x 750 mm Total length: 8,540 mm Low-bed length approx. 6,490 mm Width: 2,540 mm Bcedpsxu Dnfsfx Affou Axles: SMB Drum brakes Twin tires 235/75 R 17.5 with approx. 80% tread remaining 4 pairs of stake pockets 90 x 50 mm in the low-bed 2 pairs of stake pockets 90 x 50 mm in the raised bed 3 pairs of recessed lashing rings 10,000 kg in the low-bed 2 pairs of recessed lashing rings 10,000 kg in the raised bed Various lashing points 3,000 kg Loading height approx. 900 mm Ramp angle approx. 10° Height-adjustable drawbar 40 mm towing eye LED lighting Hot-dip galvanized frame Side underride protection 2 pairs of warning boards 1x revolving beacon Rear support ABS EBS Storage compartment with flap in raised bed Financing/lease purchase possible upon request!

Condition: like new (used), functionality: fully functional, empty load weight: 4,730 kg, maximum load weight: 13,270 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, loading space length: 6,270 mm, loading space width: 2,540 mm, total length: 8,520 mm, total width: 2,540 mm, total height: 3,500 mm, tire size: 235 75 R17,5, tire condition: 90 %, Year of construction: 2022, The central axle trailer by Müller Mitteltal is in very good, lightly used condition with an unladen weight of 4,730 kg, payload of 13,270 kg, gross weight of 18 t, length 8,520 mm, width 2,540 mm, height 3,500 mm. It is a twin-axle trailer with twin wheels, air suspension, and galvanized frame. VAT not deductible. Bcjdjyc Hghopfx Affou

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem ? Low Loader ? Platform ? Trailer Available at the end of February ’26 | Ref. No. for inquiries: 27678 | Free delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized front wall, 400 mm high * Hardwood excavator bucket rest bolted to the front wall * Deck height unladen 930 mm / laden 870 mm * One-piece ramps with hot-galvanized grating, anti-slip design, extendable to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifter with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° bent with hole pattern for lashing equipment, lashing force per point LC 2000 daN, min. spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with closely spaced cross-members, high-profile front and rear ends, rear incline, hot-galvanized * 10 UVV flush-mount lashing rings LC 3000 daN can be recessed into existing hole pattern in the outer frame, in addition * Additional lashing points via holes (Ø 50 mm, LC 1200 daN) in front and end crossmembers Bedpsyadz Refx Affocu * Toolbox in front of the bulkhead * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-galvanized * 2 recessed container locks in front crossmember * Height-adjustable support winch at front, drop-down supports at rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, optionally available with 50 mm towing eye * 1 removable LED beacon at the rear---- * Leasing, hire purchase, financing, trade-in possible * e.g. €515 per month with 60 months term – no down payment, no residual value * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside these hours, we are available by appointment. We speak German, English, Polish, and French. Leasing, financing, and trade-in available.

Condition: used, maximum load weight: 6,540 kg, overall weight: 8,900 kg, axle configuration: 2 axles, first registration: 04/2011, next inspection (TÜV): 10/2025, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 350 mm, Equipment: ABS, Humbaur HS 894020 TA-BS - Galvanised ramps - Ramp dampers - Drum brakes Bcedpsyakdfjfx Affju - Tyres as new - Height-adjustable drawbar - Full-load crank support leg Immediately ready for use! New roadworthiness inspection (TÜV) available on request! All information provided without guarantee! Phone calls preferred!

Condition: used, functionality: fully functional, empty load weight: 8,340 kg, overall weight: 44,000 kg, axle configuration: > 3 axles, first registration: 07/2011, loading space length: 9,010 mm, loading space width: 25,503,000 mm, Year of construction: 2011, Equipment: ABS, IMMEDIATELY AVAILABLE!!! FULLY FUNCTIONAL!!! Bcsdpfx Afex Nby Dofeu SCHWARZMÜLLER G-series low loader Interchangeable coupling 40/50 Width 2.55m–3m Net export price: 14,800 EUR

Condition: used, overall weight: 24,000 kg, axle configuration: > 3 axles, first registration: 12/2010, next inspection (TÜV): 11/2025, * SAF axles * Wheel wells * 4th axles * Hydraulic loading ramps * 50mm towing eye * Unladen weight: 9,650 kg * Permissible total weight: 24,000 kg Bcodpsvav U Sofx Affeu * TÜV: 11/2025 * SP: 05/2025 -----Internal vehicle number: 10093----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to message us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, overall weight: 24,000 kg, axle configuration: > 3 axles, first registration: 04/2016, next inspection (TÜV): 11/2025, * SAF axles * Wheel recesses * 4th axle * Hydraulic loading ramps * 50mm towing eye * Unladen weight: 9,460 kg * Permissible total weight: 24,000 kg * TÜV: 11.2025 Bjdpfsvawacsx Affecu * SP: 05.2025 -----Internal vehicle number: 10091----Subject to errors & prior sale. WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp.

Condition: new, functionality: fully functional, empty load weight: 425 kg, maximum load weight: 1,075 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 3,610 mm, loading space width: 1,900 mm, tire size: 10", tire condition: 100 %, Year of construction: 2026, Scope of delivery: 1x Car transporter with winch and tilting function 1500kg Description: Car transport trailer equipped with a winch, tilting function, and loading ramps. Thanks to the pre-installed 12m winch, you can easily load and transport vehicles that are no longer drivable. The tilting feature, combined with additional loading ramps, allows for a low approach angle. This facilitates trouble-free loading of vehicles with low ground clearance. The ramps are adjustable and securely stowed beneath the load platform with locking mechanism. Technical data: - Tiltable - Braked - Plastic wheel chocks with holder - With winch - Plug holder - Welded frame Gross weight: 1500kg Plug type: 13-pin Unladen weight: 425kg Payload: 1075kg Overall length: 5150mm Overall width: 2040mm Overall height: 800mm Load platform length: 3610mm Bedox Dm Iyjpfx Affjcu Load platform width: 1900mm Jockey wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorbers: No (Available as an option: €109 for 100km/h upgrade)

Condition: good (used), functionality: fully functional, empty load weight: 2,600 kg, overall weight: 10,000 kg, next inspection (TÜV): 10/2024, Year of construction: 1995, Equipment: trailer coupling, adjustable trailer coupling new tires Bsdpfx Afstq Sdlefjcu Viewings are possible at any time by appointment on our premises in 48465 Schüttorf.

Condition: used, maximum load weight: 14,460 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2016, next inspection (TÜV): 09/2026, Unladen weight 3,540 kg Overall length 7,710 mm 18 t tandem trailer Bcedpfx Aeyawvuoffeu Load length 6,000 mm, width 2,550 mm Container locks for 20-foot containers Loading height 880 mm Front drawbar eye 50 mm BPW axles Raise/lower valve for air suspension Tyres 245/70 R 17.5

Condition: new, functionality: fully functional, empty load weight: 602 kg, maximum load weight: 2,098 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,150 mm, tire size: 10, tire condition: 100 %, maximum speed: 100 km/h, Year of construction: 2026, Scope of delivery: 1x car transporter with cable winch and tipping function 2.7t Bedpfx Afoyar Dmsfecu Description: Car transport trailer with cable winch, tipping function and drive-on ramps. Thanks to the pre-installed cable winch with a length of 12 m, you can also easily load and transport cars that are no longer roadworthy. Thanks to the tipping function with additional drive-on ramps, the trailer can be driven onto at a low angle. This makes it easier to load vehicles with low suspension. Ramps are adjustable and securely stowed under the transport surface with a safety catch. Cable winch: Length: 12 meters Pulling force: 1135 kg / 2500 lb Technical data: - tiltable - braked - Automatic support wheel - Plastic wheel chocks with holder - with cable winch - Plug holder - Welded frame Total weight: 2700kg Plug type: 13-pin Tare weight: 602kg Payload: 2098kg Overall length: 5550mm Overall width: 2040mm Overall height: 780mm Length of loading area: 4040mm Width of the loading area: 1900mm Support wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorber: No (surcharge: 199,- Euro for 100km/h extension) Track dimensions: Width: 30 cm Length: 120 cm

Condition: used, empty load weight: 8,500 kg, maximum load weight: 31,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/2012, loading space length: 10,500 mm, loading space width: 2,510 mm, loading space height: 970 mm, suspension: air, tire size: 245/70R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, hydraulic ramps, rear support, twin tires, wheel recesses. Body: 4-axle low-loader trailer with hydraulic loading ramps, 4x 10t Gigant axles, drum brakes! Ramp length approx. 2850 mm! Loading height approx. 970 mm! Wheel recess height at the front approx. 600 mm, at the rear approx. 670 mm! Bcedpfxexx A H Io Affsu The trailer has received a new kingpin! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - .

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: Bcedpfx Afjl Tnwzefeu * TPMS (Tire Pressure Monitoring System), display possible in the truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device * Tool box made of powder-coated sheet steel, plus spare wheel holder in basket design on the right side * Reflective contour marking strips on the sides and rear * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-board at the rear * LED rear lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers * Sheet steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking system and mechanically insertable stop angles at the front on the track * Load securing certificate according to DIN 30722-1 * 1 transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops are plug-in with pivoting stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; 4 lashing cleats each in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with an additional 4 x 8 t lashing eyes per side recessed into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld seam as anti-slip surface in the ramp area of the approach slope * Mechanical drop-down supports at the rear * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible total weight technically possible: 20,000 kg-- * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egstorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency Release Device for Spring Brake Cylinders * LED Lighting * Drum Brakes * 2 x 7-ton Gigant Axles * Parabolic Springs with Equalizer * Height-adjustable Drawbar by 300 mm * Drawbar Extension by 250 mm to 2,250 mm * Jost Landing Gear at the Front * Externally Mounted, Hot-dip Galvanized Folding Support Legs at the Rear * Plastic Toolbox, Front Right, on Bulkhead * Side Underrun Protection * Plastic Quarter Mudguards * Hot-dip Galvanized Chassis and Drawbar * Front Bulkhead * Rear Wall * Tailgate and Loading Ramps Bsdpfxervvfls Affjcu * 50 mm Softwood Floor * Preparation in Front of Bulkhead for Subsequent Installation of Container Locks * Bolted Bulkhead from Smooth Sheet Metal * Trapezoidal-profile Fold-down Steel Sidewalls with Sideboard Spring Assist * Slide-in Steel Rear Wall between the Ramps—mounting bracket for storage inside the front bulkhead when not in use * Bolted Rear Stanchions * Perforated Outer Frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm; possible installation of 3 t recessed lashing rings every 600 mm; 1 x 6.3 t lashing point in each front and rear corner; various drillings for 1.2 t lashing options on the front and end cross members * One-piece Mechanical Grid Loading Ramps with Spring Mechanism for Single-person Operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear Entry Slope approx. 860 mm * --Reinforced and Certified Structure according to EN 12642 XL including Load Securing Certificate-- * Sideboard Color in RAL 9010 Pure White * Sidewall Painting in Any RAL Color Available at Extra Cost * New Vehicle with Manufacturer’s Warranty * Subject to Errors and Prior Sale * Available from Calendar Week 08/2026

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * RDÜ (Tire Pressure Monitoring), display possible in the truck via EBS signal (no truck-side installation required) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted on the right side * Contour tape on sides and rear, reflective * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffers * Foldable A-sign at the rear * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers * Steel sheet floor with roll recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic four-point clamp locking and mechanical plug-in front stop angles on the guide track * Load securing certificate according to DIN 30722-1 * 1 transport operation for up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plugged in and with pivoting stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of the skips; 4 lashing bars in cloverleaf design (on the sides) each and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with additional 4 x 8 t lashing rings each side, integrated into the outer frame * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 Bodpfxjl Tld Io Affocu * Weld bead as anti-slip coating in the ramp area of the inclined plane * Mechanical drop-down supports at the rear * Aluminium loading ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible gross vehicle weight technically possible: 20,000 kg-- * New vehicle without first registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic braking system (EBS) * Emergency release mechanism for spring-loaded brake cylinders * LED lighting * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized foldable supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Fixture in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet, foldable, with drop-side spring assist * Steel rear wall, slidable between the ramps—storage bracket inside at the front wall when not in use * Bolted rear stanchions * Perforated outer frame, bent at approx. 45 degrees, with 2-ton lashing capacity every 480 mm, installation of 3-ton folding lashing rings possible every 600 mm, 1 x 6.3-ton lashing ring in each front and rear corner, various holes in the front and end crossmember for 1.2-ton lashing options Bcedpfxjxglibj Affsu * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Drop side color in RAL 2011 deep orange * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 08/2026 * Sample images

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: * RDÜ (tire pressure monitoring system) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizer unit * Drawbar adjustable in height by 300 mm * Drawbar extension of 250 mm to a total of 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox at front right, mounted on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps Bodpfx Ajq Dyvvsffocu * 50 mm softwood floor * Provision in front of the front wall for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profile steel, fold-down with drop side spring assist * Steel rear wall, can be inserted between the ramps – storage bracket inside at the front wall when not in use * Bolted rear stanchions * Perforated outer frame, edged at approx. 45 degrees, with 2 t lashing capacity every 480 mm. Installation of 3 t folding lashing rings every 600 mm possible. Each front and rear corner with 1 x 6.3 t lashing ring; multiple 1.2 t lashing points in the front and rear crossmember. * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm * Reinforced and certified body according to EN 12642 XL including load securing certificate * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available for a surcharge * New vehicle with manufacturer's warranty * Subject to alteration and prior sale * Available from calendar week 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) Bcjdpfjxglh Rex Affsu * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7-ton Gigant axles * Parabolic leaf springs with balancing unit * Tow bar height adjustable by 300 mm * Tow bar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and tow bar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made from smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet, foldable with drop side lift assist * Steel rear wall, can be inserted between the ramps, storage bracket for non-use inside at the front bulkhead * Bolted rear stanchions * Perforated outer frame approx. 45 degrees bent, with 2-ton lashing capacity every 480 mm; installation of 3-ton drop lashing rings every 600 mm possible; in each front and rear corner 1 x 6.3-ton lashing ring; various holes for 1.2-ton lashing options in the front and rear crossmembers * One-piece mechanical grating loading ramps with spring mechanism for one-man operation approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear drive-on slope approx. 860 mm * -- Reinforced and certified bodywork according to EN 12642 XL including load securing certificate -- * Drop side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 08/2026 * Sample images

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning sign packages front and rear * Side and rear contour marking tape, reflective * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) at the rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet, plus basket-type spare wheel holder on the right side * Closed single plastic fenders at the front Bjdpfxsl Th Evs Affjcu * Straight steel mudguards at the rear, each with splash protection (spray suppression) * Side underrun protection * Extended offset bend by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made of high-strength fine-grained steel * Deck over the turntable platform made of 50 mm and on the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * 4 stanchion pockets on each side (without stanchions) with simultaneous 2 t lashing option * Load securing package consisting of: 2 tie-down eyes 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings at the front and rear side frames, 4 pairs each side of 10 t foldable and lowerable lashing rings, loadable in all directions and recessed in the outer frame, 2 pairs of 6.4 t lashing rings on the excavator arm rest, 8 pairs of galvanized fold-out outriggers for 3 m total width (not at the rear slope) * Widening planks stored in a side left compartment * Excavator arm rest above the rear axle up to the end of the inclined rear approx. 2,300 x 740 x 190 mm * Mechanical drop legs at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shifting on sliding tube from the ramp shaft * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (incl. 860 mm ascending slope) * Chassis, turntable, loading ramps, mechanical rear drop legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 14 / 2026

Condition: new, Aluminum drive-on ramps (LxW) 3600x360 mm, weight 2 x 36 kg Bcsdpfx Asvbn D Ijffou