Used Doll Semitrailers With Work Platform for sale (66)

Condition: used, maximum load weight: 16,280 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 10/2022, next inspection (TÜV): 02/2026, loading space length: 6,400 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2022, Equipment: ABS, DOLL 2-axle turntable trailer Type A2G-LZ64, round timber transport First registration 10/2022 Kdedpfx Asytz Nrodgol Unladen weight approx. 3,700 kg Loading length 6,400 mm 4x steel bolsters with 8 DOLL Mammut steel stakes, load capacity per pair of stakes 9,000 kg Air suspension with lift/lower function WABCO Trailer-EBS Twin tyres 275/70 R 22.5 Full LED lighting 2x frame protection rails RENTING is the new BUYING, also available from us as full-service rental—immediately available-----

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, tire size: 245/70R17,5, color: green, Year of construction: 2018, = Additional Options and Accessories = - Central lubrication = Notes = Doll T2E-S3F/S21. Year: 2018. 12-ton BPW Panther axles. Unladen weight: 14,120 - 15,800 kg. Maximum gross weight: 45,000 kg. Kingpin load: 21,000 kg. 5-meter extendable. Hydraulic detachable gooseneck. Aluminum side boards + toolbox on gooseneck. Hydraulics compatible with NATO coupling. EBS, ABS, ALB. Hydraulic suspension. Radio remote control. Zinc-coated. Alcoa wheels. 3 removable floor panels. Dimensions: Gooseneck: L: 3,350 mm Ksdpfx Adoy Sk Dkegodl W: 2,500 mm H: 1,500 mm Kingpin height: 1,150 mm Floor: L: 7,000 mm W: 2,550 mm H: 450 mm Floor thickness: 220 mm Rear of trailer: L: 2,800 mm W: 2,550 mm H: 930 mm Tyres: 245/70R17.5 80% 2 units available! German trailer! ID No.: 234. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations made by Heinhuis, as well as all contracts concluded by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General information Year of manufacture: 2018 Axle configuration Tyre size: 245/70R17.5 Axle brand: BPW Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steering; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steering; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Weights Unladen weight: 14,120 kg Payload: 30,880 kg Gross vehicle weight: 45,000 kg Condition Technical condition: good Visual condition: good Financial information Price: On request = Company Information = For more information: WhatsApp:

Condition: used, maximum load weight: 37,550 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2009, Flyer with air suspension and hydraulic dual-circuit forced steering (turntable). Dimension B: 11,900 - 19,600 mm Unladen weight: 10,450 kg Loading Platform - Design: "Flatbed" with single-stage telescoping Kedpsy Sd Ensfx Adgodl - Mechanical landing legs - 90° front corners, closed outer frame - Integrated articulation at the front of the frame - Fifth wheel plate with ball bearing turntable, interchangeable 2" kingpin, and adjustable steering wedge - Heavy-duty rear crossmember serving as underrun protection Chassis - 3-axle chassis with air suspension incl. raise/lower valve - BPW axles Braking System - Dual-line all-wheel pneumatic braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-actuated cylinders - ABV (ABS) Loading Platform LxW: 13,500 x 2,480 mm Telescopable by +7,700 mm up to 21,200 mm Loaded platform height: 1,380 mm At loaded coupling height: 1,200 mm Steering radius to rear: 2,350 mm Fifth-wheel load: 18,000 kg

Condition: new, maximum load weight: 31,400 kg, overall weight: 45,000 kg, axle configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL NEXT DOLL NEXTLowbed tera T2P-S3FS21 – 2-axle lowboy trailer from the rapidly available rapid series by DOLL Fahrzeugbau GmbH, Oppenau – straight from the heart of the Black Forest. Ideal for demanding applications in tough off-road environments, challenging terrain, and for daily use on construction sites. Kedpfx Aoyytm Redgsdl Depending on availability, very fast delivery and operational readiness thanks to DOLL's rapid series production. Individually configurable according to your specific requirements and wishes. Technical Data * Permissible Gross Weight: 45,000 kg * Unladen Weight: approx. 13,600 kg * Payload: approx. 31,400 kg * Running gear: 2 x 12t pendulum axles * Extendable lowbed * Vehicle width: 2,550 mm * Load height (loaded): 300 mm * Wheelbase: 1,360 mm Equipment Features * Detachable gooseneck for significantly easier and faster loading and unloading * Smooth telescoping for efficient handling * High-quality spray galvanization for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized attachments: robust and durable – no rust Your Key Benefits at a Glance * Rapid availability * Robust & reliable – proven technology, ideal even in demanding conditions * Made in Germany – manufactured by DOLL Fahrzeugbau GmbH in Oppenau, a company with over 145 years of experience in premium vehicle engineering Smart Technologies Our innovative approach combines quality, performance, and cost-effectiveness at the highest level. The rising demand for our lowbed semi-trailers drives the continuous development of state-of-the-art technologies in series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (headquarters and production site) * The vehicles can be demonstrated either at the factory or at selected reference customers across Germany, together with one of our field sales representatives, depending on customer location.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, tire size: 245/70R17,5, color: green, Year of construction: 2020, Doll T3E-S3F/28. Year: 2020. 12 t BPW Panther axles. Gross weight: 64,000 kg. Kingpin load: 28,000 kg. Extendable by 6 meters. Alcoa wheels. Hydraulic suspension. Galvanized. Spare tyre. Radio remote control. 4 detachable floor panels. Hydraulically detachable gooseneck. Aluminum side boards and toolbox on gooseneck. Hydraulics compatible with NATO coupling. Dimensions: Gooseneck: Length: 3,500 mm Width: 2,500 mm Height: 1,500 mm Kingpin height: 1,200 mm Deck: Length: 8,300 mm Width: 2,750 mm Height: 400 mm Deck thickness: 220 mm Rear of trailer: Length: 4,150 mm Width: 2,750 mm Height: 950 mm Tyres: 245/70R17.5, 50% tread remaining. 2 units available! German trailer! Kedpfjy N D Scox Adgjdl ID No.: 645 The General Terms and Conditions of Heinhuis apply to all adverts, offers and quotations by Heinhuis, to all agreements entered into by Heinhuis, and to any preceding negotiations. By responding in any form you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = General Information Year of manufacture: 2020 Axle Configuration Tyre size: 245/70R17.5 Axle make: BPW Rear axle 1: twin tyres; light-alloy rims; max. axle load: 12,000 kg; steered; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Rear axle 2: twin tyres; light-alloy rims; max. axle load: 12,000 kg; steered; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Rear axle 3: twin tyres; light-alloy rims; max. axle load: 12,000 kg; steered; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Weights gross vehicle weight: 64,000 kg Condition Technical condition: Good Visual condition: Good Financial Information Price: On request = Company Information = For more information: WhatsApp:

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, tire size: 245/70R17,5, color: green, Year of construction: 2015, Doll T3E-S3F/28. Year of manufacture: 2015. 12-ton BPW Panther axles. Gross weight: 64,000 kg. Kingpin load: 28,000 kg. Extends by 6 meters. Alcoa wheels. Hydraulic suspension. Galvanized (zinc coated). Spare wheel. Radio remote control. 4 removable floor sections. Hydraulically detachable gooseneck. Aluminum side boards and toolbox on gooseneck. Hydraulics compatible with NATO coupling. Dimensions: Gooseneck: L: 3,500 mm W: 2,500 mm H: 1,500 mm Kingpin height: 1,200 mm Platform: L: 8,300 mm W: 2,750 mm H: 400 mm Platform thickness: 220 mm Rear section of trailer: L: 4,150 mm W: 2,750 mm H: 950 mm Tyres: 245/70R17.5, tread 80% 2 units available! German trailer! ID No: 680 Heinhuis General Terms and Conditions apply to all advertisements, offers, and quotations from Heinhuis, to all agreements entered into by Heinhuis, and to the negotiations preceding them. By responding in any form you accept the applicability of the Heinhuis General Terms and Conditions and declare that you have taken note of these. Our prices are net export prices. Kjdpfsy I Rltex Adgodl = Further Information = General Information Year of manufacture: 2015 Axle Configuration Tyre size: 245/70R17.5 Axle manufacturer: BPW Rear axle 1: Twin tyres; alloy wheels; max. axle load: 12,000 kg; steered; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 80%; tyre tread right outer: 80% Rear axle 2: Twin tyres; alloy wheels; max. axle load: 12,000 kg; steered; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 80%; tyre tread right outer: 80% Rear axle 3: Twin tyres; alloy wheels; max. axle load: 12,000 kg; steered; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 80%; tyre tread right outer: 80% Weights Gross vehicle weight: 64,000 kg Condition Technical condition: good Visual condition: good Financial information Price: On request = Company Information = For more information: WhatsApp:

Condition: good (used), axle configuration: 3 axles, first registration: 09/2002, color: other, Year of construction: 2002, GVW: 36.000 kg Technical condition: good Kdodoy Ig Rfjpfx Adgol Visual appearance: good

Condition: used, maximum load weight: 14,225 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 6,611 mm, loading space height: 4,000 mm, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-axle short timber trailer in "stool design" type A2G-10L500 (A131) Technical data: Dimensions: Total trailer length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Load height top edge of frame loaded: 1,187 mm (with 275/70 R 22.5 tires) Overall height: max. 4,000 mm Weights: Kdsdpfxoy Ifyfj Adgjl Perm. total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (techn. 24,000 kg) Unladen weight approx.: 3,350 kg (without stools and stanchions) Payload approx.: 14,650 kg Basic equipment:A2G DOLL - 2-axle short timber trailer in "stool design" - straight top chord Sturdy welded construction consisting of 2 longitudinal beams with straight upper chord. - Bogie with ball bearing rim - 1 wheel chock with bracket - Side underrun protection in accordance with ECE?R 737254461 Rear underrun protection: Aluminum underride guard, in accordance with ECE?R 58 Complete lighting and license plate holder installed in a protected manner, in accordance with ECE?R 487227407 Wheel cover: Complete plastic mudguards over the wheels, attached to the bogie at the front and to the main frame at the rear, with DOLL mud flaps behind the axles. Frame cover: Full-length aluminum duet plate cover (3/5 mm) bolted between the upper chords.7206867 Drawbar GZY27: Drawbar fork with silent bushing bearings and drawbar support, type GZY 27drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight:Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN 10 t 27 t Connecting cable to the truck: routed along the drawbar (air, light, ABS). Cable routing: Brake and electrical cables routed protected on the main frame. Grapple bracket: Angled grapple bracket at the front, reinforced. Mud flap: Continuous mud flap at the end of the vehicle, swinging, with ?DOLL? log Chassis / Chassis:12 t Chassis: 2 single axles, BPW, 12 t with drum brakes, both axles with ABS and AGS, including safety ropes. Suspension type SL, with 2 x 43 mm trailing arms. Air suspension: Air suspension without lifting and lowering. Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine the axle loads. The axle loads are transmitted to the truck via CAN-BUS for weight display in the truck display. (Truck equipment not included in the scope of delivery!) Brake system: Electronically controlled 2-line air brake system (EBS-E). Brand name, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, can be operated via parking release safety valve, as well as from the cab (truck-side installation not included in scope of delivery!) Aluminum air tank Brake connection: 1 duomatic clutch head. Tires: Tires (85.50 kg / piece): 8 pieces tires 275/70 R 22.5 make Continental Hybrid HS3 on steel rim 8.25 x 22.5. Stools / stanchions: Stool: 6 pieces ECCO? steel stool body with 2° stanchion inclination type Kombi 7 (80.0 kg), with bracket ? Clamp fastening on the main frame including 1 pair of hooks for load securing. Stanchions: ECCO aluminum stanchions type ALU 7, screwable, fixed dimension stanchions. Basic height 2,550 mm (21.0 kg). Maximum loading capacity per pair of stanchions 7t. Electrical equipment / lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. ? Long service life ? Insensitive to moisture and dirt ? Minimal maintenance ? Quick and easy repair in rare serv

Condition: used, maximum load weight: 69,800 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 09/2014, loading space length: 19,800 mm, total width: 2,750 mm, total height: 2,900 mm, Equipment: ABS, Special low-bed trailer for long and heavy transports. The low-bed section has a loading area of approx. 7,700 mm, plus it is extendable by an additional 5,300 mm. The low-bed can be rotated into a platform configuration (length 15,305 mm – extendable up to 20,605 mm). Loading height as low-bed is approx. 420 mm; as platform, the loading height is approx. 800/900 mm. The low-bed can be widened up to 3,200 mm. Axles: DOLL Panther technology, double wishbone suspension with hydraulic spring system, 12,000 kg per axle, fifth-wheel load 25,000 kg. Suitable for payloads up to approx. 80,000 kg at reduced speeds only. Dimensions without front dolly axles: length approx. 17,350 + 5,300 mm extendable. Unladen weight approx. 21,600 kg, payload up to approx. 69,650 kg at reduced speeds only. Current new price approx. €460,000 net. SI85047 Kodpfjyad Rlex Adgsdl Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops! Vehicle may be fitted with advertising stickers and/or decals. Our general terms of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 24,640 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 08/2009, loading space length: 12,100 mm, loading space width: 3,000 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, Doll T2H-S3 Baggerbett Tieflader With Abnehmbaren Schwanenhals Kdsdoyi Nm Dspfx Adgol Erstzulassungx BPW Eco Achsen Hiedraulisch Gelenckt With Funkfernbedienung Luftfederung Drum brakes with ABS and EBS Reifen:245/70 R17.5 Approx.35% Total weight: 38,000 kg, Leather weight: 13,360 kg, Nutzload: 24,640 kg. Maximum Bed Length:670 + 540 Cm. Schwanenneck:405 cm. Hinterteil:275 cm. Width:255 + 2x30 cm. Tiefbethöh:46 cm. Fluhrhöhe Hinten:94 Cm. Baggermulde. Irrtümer / Schreibfehler und Zwischenverkauf Vorbehalten

Condition: used, maximum load weight: 35,870 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 04/2027, loading space length: 14,000 mm, Year of construction: 2021, Equipment: ABS, DOLL Type H3L ? 14XL 3-axle Timber Stake Semi-Trailer, extendable by 3.5 m to a maximum total length of 12,950 mm, platform in bolster design, 6x ExTe steel bolster bodies Type 144-S with Ecco-Steel square stakes, various lashing points on the frame, possible log transport lengths: 2x 6m, 2x 5m, 3x 4m, 3x 3m, and long logs up to 14m, SAF axles 3x 9,000 kg with air suspension, lift and lowering function, ABS, disc brakes with EBS, 1st axle liftable, last axle self-steering, WABCO brake system with WABCO 'SmartBoard' control unit for air suspension, load pressure gauge, odometer, etc., plastic tool box on the left rear side, LED rear lights and LED work lights, 385/65 R 22.5 tires // 6 units, technically permissible gross weight 42,000 kg, unladen weight 6,130 kg, one owner, good overall condition, German vehicle with German registration documents! Sale to trade only! All information subject to change! Errors and prior sale excepted! Kjdpfxsyqcbqe Adgjdl

Condition: new, empty load weight: 13,850 kg, maximum load weight: 31,150 kg, overall weight: 45,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, loading space length: 6,800 mm, loading space width: 2,550 mm, loading space height: 300 mm, tire size: 245/70 R 17,5, color: black, Equipment: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame, featuring integrated steering sensor and individually operated lifting cylinders - Integrated hydraulic cylinders and support arms for picking up and setting down the low bed - Hydraulic line connections to the low bed are mounted internally on the main beams in the gooseneck area - Bracket for storage of locking pins Low bed, extendable: - Frame pre-tensioned for maximum payload, reduced payload when extended - Prepared for fitting of deck widenings - Telescopic stages approximately every 500 mm, plus container positions - 7 pairs of swiveling lashing rings, 13,400 daN lashing force - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threads on the outside of the telescopic frame for screwing in lashing brackets - 1 pair of M36 threads on the inside of the telescopic frame for screwing in lashing brackets - Prepared for the installation of container locks - Adapter without pin/lug coupling: 2 pairs of 13,400 daN lashing rings welded onto the adapter towards the low bed; 1 pair on the outside of the adapter; 1 pair on the inside of the adapter - 45 mm spruce timber floor fitted between the flatbed frames Running gear, drivable: - Short steel welded construction with open excavator trough at the rear - Gooseneck drop to low bed at 90°, with 2 pairs of holes at the front and rear of the running gear platform for attaching access ramps using safety pins - Adjustable track widths provided by 2 different sets of holes - Smooth steel plate with sand finish welded above axles, maximum axle load of 5,000 kg - End cross member with cut-outs for lighting, designed as underride guard according to ECE R58-003 - Valves and electrical distribution protected and installed in the intermediate floor Axles, suspension, and tires: - DOLL tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles rated at 12 t, with ABS and AGS (automatic slack adjuster) - All axles hydraulically forced steered, max. 60° steering angle on rearmost axle - Use of low-maintenance bearings in the steering area - All lubrication points connected to the central lubrication system - Lift axle / jack function. A locking pin is supplied for each axle to allow raising - DOLL tera pendle axles with hydraulic suspension and damping elements - Raising and lowering device with total lift of 600 mm (-70 / +530) - Hydraulic dual-circuit displacement steering - Steering transmission at the fifth wheel coupling mounted on a slewing ring - Steering angle transferred via a push-pull rod to the front master cylinders - Rear slave cylinders transfer the steering angle via robust track rods to the steerable axles - All valves centrally located on a single control block - Axle load indicator (manometer) mounted laterally - Steering pressure monitoring gauge - Tire pressure monitoring system - Tires 245/70 R 17.5 Included accessories: - Steel front wall with spare wheel holder, bolted, height 520 mm, hot-dip galvanized Kedpfx Ajy Dqkhsdgsdl - Removable drop sides including rear board, approx. 400 mm high, anodized - Two BEKAMAX centralized lubrication units - DOLL Tronic CAN-Bus system - Support arms for picking up and setting down the low bed - Saddle plate with integrated steering pick-up, steering wedge, and 2'' kingpin for trailer connection - Gooseneck cylinder for picking up and setting down the low bed - 6-way hydraulic coupling with pressure relief valve for easy hydraulic line separa

Condition: used, Year of construction: 1989, Doll M175 Long Material Transporter. Year of manufacture: 1989. 10-ton BPW axles. Unladen weight: 6,650 kg. Gross weight: 24,000 kg. Steel suspension. Tyres: 315/80R22.5, tread depth 80%. German trailer! ID No.: 593. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations made by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = Year of manufacture: 1989 Unladen weight: 6,650 kg Payload: 17,350 kg Gross vehicle weight: 24,000 kg = Company Information = Kdodpfx Adjy Ay Rnegsl For more information: WhatsApp:

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: brown, Year of construction: 2021, operating hours: 280,039 h, mileage: 280,039 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 69702 Doll, H3L-14 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Follower-steered axle (trailing steering axle) * Duomatic air connection * 15-pin connection plug * Storage box/toolbox * Telescopic – telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg Kdsdpfxsyib D Eo Adgel * Perm. gross weight: 42,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% -- 60% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 60% -- 60% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 60% -- 50% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Mileage: 280,039 km * Telescoping length: 3,500 mm * Extension range: 9,450 mm – 12,950 mm * 6x steel bolster frames with Ecco-Steel squared stanchions * Timber transport: 2x 6 m, 2x 5 m, 3x 4 m, 3x 3.7 m, 3x 3 m; long timber up to 14 m * 3rd axle is trailing-steered with reverse lock Liability disclaimer: Subject to change, prior sale, and errors excepted. Further photos and videos available on our website. Our comprehensive service offer includes, for example: * Purchase/Sale/Rental of commercial vehicles * Fast, hassle-free financing * Application for all (export) documents * Procurement of export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles For further information, our trained specialists are at your disposal and will be happy to advise you.

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: brown, Year of construction: 2021, operating hours: 275,194 h, mileage: 275,194 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69699 Doll, H3L-14 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Trailing steering axle * Air connection Duomatic * 15-pin connector plug * Storage/toolbox * Suspension: Air * Gross weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg * Permissible gross weight: 42,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Mileage: 304,338 km * Telescopic extension: 3,500 mm * Extension: from 9,450 mm to 12,950 mm * 6x steel bolster bodies with Ecco-Steel square stakes * Timber transport: 2x6m, 2x5m, 3x4m, 3x3m, 7m, 3x3m; long timber up to 14m * 3rd axle with trailing steering and reverse lock Liability disclaimer: Subject to changes, prior sale, and errors excepted. More images and videos available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation Kjdpfx Aeyib Ikedgjdl * Ordering of export/license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Delivery/transport of commercial vehicles Contact our trained professional staff – we will be happy to advise you.

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, next inspection (TÜV): 02/2027, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: brown, Year of construction: 2021, operating hours: 275,194 h, mileage: 275,194 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69700 Doll, H3L-14 * Year of manufacture: 2021 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Trailing steering axle * Duomatic air connection * 15-pin connector plug * Storage/toolbox * Valid inspections: General (HU)/Emissions (AU) until 02.2027 * Suspension type: Air * Gross vehicle weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg * Permissible gross weight: 42,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 70% -- 60% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Mileage: 275,194 km * Extendable by 3,500 mm * Extension from 9,450 mm to 12,950 mm * 6x steel bolster bodies with Ecco-Steel square stakes * Timber transport: 2x6 m, 2x5 m, 3x4 m, 3x3.7 m, 3x3 m; long timber up to 14 m * 3rd axle with steering lock (self-steering/reverse lock) Liability disclaimer: Subject to changes, prior sale, and errors. More pictures and videos available on our website. Our comprehensive range of services includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents Kjdpfx Adjyib E Asgedl * Ordering of export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/lash securing * TüV inspections, registration service * Transfer/delivery of commercial vehicles Ask our trained specialist staff—we’re happy to advise you.

Condition: used, empty load weight: 12,360 kg, maximum load weight: 32,640 kg, first registration: 11/2010, next inspection (TÜV): 09/2024, total length: 20,000 mm, total width: 25,500 mm, total height: 7,000 mm, suspension: air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,035 mm, front tire size: 245/70 R 17.5 /10mm, operation weight: 45,000 kg,

Condition: new, maximum load weight: 34,720 kg, overall weight: 39,500 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, DOLL LOGO 10X NEW | 3-axle bolster semi-trailer | Approx. 34.7 t payload | Long timber | €59,500 New vehicle – individually configurable to suit your application. 3-axle bolster semi-trailer in drop frame design for professional long and round timber transport. Engineered for high payload, robust off-road and on-road operations, and maximum flexibility regarding load configurations. -- Highlights -- - Approx. 34,720 kg payload - 3-axle bolster semi-trailer for long and round timber - LOGO-10X version with strong frame drop - 6-bolster configuration with flexible loading options - SAF axles with disc brakes - Lift axle (1st axle) - Weight display in cab (CAN-Bus) - Full LED lighting with dynamic indicators -- Technical Data -- - Gross vehicle weight: 39,500 kg - Fifth wheel load: 12,500 kg - Axle load: 27,000 kg Ksdpsypa Hzjfx Adgsdl - Unladen weight approx.: 4,780 kg - Payload approx.: 34,720 kg - Overall length: approx. 9,195 mm - Loading length (B-dimension): approx. 8,650 mm - Width: 2,550 mm - Coupling height loaded: approx. 1,100–1,250 mm - Bolster top edge loading height: approx. 1,080 mm - Max. overall height: 4,000 mm -- Standard Equipment -- - High-strength, FEM-optimized frame made of fine-grained steel - 2" king pin, bolted and replaceable - 6 ExTe steel bolsters in LOGO-10X arrangement - Telescopic aluminium stakes - SAF 9 t axles with disc brakes (ET120) - Electronic braking system EBS-E including ABS - Conventional air suspension with automatic lift axle - Side underrun protection according to ECE-R73 - Rear underrun protection according to ECE-R58-3 - Aluminium air tanks - Protected routing of brake and electrical lines -- Included Options / Features (excerpt) -- - Weight display via CAN-Bus in cab - Tire pressure monitoring system (TPMS) - Lift axle on 1st axle - Steel frame covers in the drop section - Tread plate cover at rear section - Full LED lighting according to ECE-R48 - LED work lights at sides & rear - Grab protection (multiple implemented) - Continuous mudguard with DOLL logo - Contour marking according to ECE - TÜV inspection / vehicle documentation Further features and individual customizations available at any time – we configure your vehicle precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, maximum load weight: 16,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 3,500 mm, total width: 2,550 mm, total height: 955 mm, Year of construction: 2026, Equipment: ABS, rapid+ 2-axle center-axle trailer A2T-LZ35 ALPHA * Only 2,600 kg unladen weight * Air suspension * 2 single axles, SAF brand, 9 t with disc brakes, including safety cables * 265/70 R 19.5 tires on high-gloss aluminum rims * Aluminum air reservoirs * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 2x grab ropes Kdjdpehnaknofx Adgsl * Paint finish: frame/stool color graphite black * Drawbar with Ø 50 mm towing eye * Side impact protection according to ECE R 73 * For transporting 1 x 3 m / 1 x 4 m / 1 x 5 m of timber * 2x ExTe D10 stools + conical stanchions Ex works in Mildenau. Subject to change and prior sale. Further information available upon request. Information provided without guarantee. Images may differ from the original. Contact: Niclas Lott Tel.:

Condition: used, empty load weight: 12,400 kg, maximum load weight: 39,500 kg, first registration: 10/2006, next inspection (TÜV): 10/2025, total length: 13,500 mm, total width: 25,500 mm, total height: 10,000 mm, suspension: air, tire size: 245/70 R 17.5/7mm, wheelbase: 1,300 mm, front tire size: 245/70 R 17.5/7mm, operation weight: 51,900 kg,

Condition: used, empty load weight: 13,000 kg, maximum load weight: 35,000 kg, first registration: 07/2009, next inspection (TÜV): 01/2025, total length: 13,000 mm, total width: 25,500 mm, total height: 20,000 mm, suspension: air, tire size: 245/70 R 17.5/7mm, wheelbase: 1,300 mm, front tire size: 245/70 R 17.5/7mm, operation weight: 48,000 kg,

Condition: used, maximum load weight: 30,200 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2020, next inspection (TÜV): 10/2026, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2020, Equipment: ABS, 2-axle DOLL LOGO 21 with 8 bolsters First registered November 2020, from a single owner Mileage only 58,700 km Both axles with forced steering and remote control Hydraulic adjustment of the 3 rear bolsters, operated from the crane platform 2x 12 tonnes BPW axles with drum brakes WABCO Trailer EBS Length 10,715 mm Extendable from -1,800 to +4,500 mm Loading height 1,640 mm Unladen weight 7,800 kg Tires: 8x 315/80 R 22.5, tread depth 70 to 80% Kodpfx Aoyr U Dgjdgsdl 8-bolt design for transporting: 4x 2-meter logs 4x 3-meter logs 3x 4-meter logs 2x 5-meter logs 2x 6-meter logs and long timber up to 21 meters 8x DOLL MAMMUT steel bolsters 16x DOLL rectangular stanchions, load capacity up to 9,000 kg per pair Full-LED lighting 4x LED work lights Central lubrication system Very good condition RENT is the new BUY, also available for RENT IMMEDIATELY-----

Condition: new, maximum load weight: 16,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, total width: 2,550 mm, DOLL Shorty Rapid | from €34,900 New vehicle ? Custom configurable for your application. Compact, extremely robust central axle trailer for timber and short material transport. Ideal for maximum maneuverability with high payload capacity. ----Highlights: ? 19,000 kg permissible gross weight ? Approx. 16,400 kg payload ? 2 x SAF 9t axles with disc brakes ? Air suspension with EBS braking system ? ExTe steel bolsters recessed in the chassis ? 4 ExTe aluminum stakes (2,900 mm) ? Full LED lighting with dynamic turn signals ? Weight display via CAN bus in the truck ? Compact 6,000 mm total length – ideal for short timber ----Technical specifications: ? Permissible gross weight: 19,000 kg ? Axle load: 18,000 kg ? Drawbar load: 1,000 kg ? Unladen weight approx.: 2,600 kg ? Payload approx.: 16,400 kg ? Trailer overall length: 6,000 mm ? Load length: 3,500 mm ? Width: 2,550 mm ? Loading height at top of chassis: approx. 955 mm ? Tyres: 265/70 R19.5 on steel rims ----Standard equipment: ? Weight-optimized frame made from high-strength fine-grained steel ? 2 SAF 9t single axles with disc brakes ? EBS-E 2-line compressed air braking system ? Air suspension ? DuoMatic brake coupling Ksdsypa Dmjpfx Adgedl ? ExTe steel bolsters recessed in main frame ? 4 ExTe aluminum stakes (10t per pair) ? Aluminum air tank ? LED lights to ECE-R48 ? LED work lights, side and rear ? Rear underrun protection to ECE-R58 ? Side underrun protection ? Continuous steel frame cover ? Plastic mudguards with spray suppression mats ----Includes additional equipment: ? 1 wheel chock with holder ? Swivel support with 5t static load ? Grapple deflector between bolsters ? Grapple holder at front + grapple rope at rear ? Rear marking plates to ECE R70 ? Continuous mud flap with DOLL logo ? Contour marking (side yellow, rear yellow + U-marking, AT) ? Work lights side + rear ----Further options and custom adaptations available on request – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, maximum load weight: 44,400 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL NEXT DOLL NEXTTiefbett tera T3P-S3FS25 – 3-axle low-bed trailer from the rapid series by DOLL Fahrzeugbau GmbH, Oppenau – in the heart of the Black Forest. Ideal for demanding applications in tough off-road conditions, challenging terrain, and daily use on construction sites. Thanks to DOLL rapid-series manufacturing, the trailer is available at very short notice and ready for operation, subject to availability. Can be individually configured to meet your specific requirements. Technical Data * Permissible gross weight: 61,000 kg * Unladen weight: approx. 16,600 kg | Payload: approx. 44,400 kg * Chassis: 3 x 12 t pendulum axles * Extendable low-bed * Vehicle width: 2,550 mm * Loading height (loaded): 300 mm * Wheelbase: 1,360 mm Features * Removable gooseneck for significantly easier and faster loading and unloading * Smooth telescoping for efficient handling * High-quality hot-spray galvanizing for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized add-on components – robust and long-lasting – rust-free Kjdpfxsyytnbj Adgodl Your Advantages at a Glance * Rapid availability * Robust & reliable – proven technology, ideal even under the most demanding conditions * Made in Germany – manufactured by DOLL Fahrzeugbau, Oppenau – over 145 years of experience in premium vehicle manufacturing Smart Technologies Our innovative approach combines top-level quality, performance, and cost efficiency. The steadily increasing demand for our low-bed semi-trailers is driving further development and implementation of cutting-edge technologies in series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (headquarters and production site) * Depending on customer location, the vehicles can be demonstrated directly at the factory or, in cooperation with our field sales team, at selected reference customers across Germany.

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Kdsdpfx Aoyxb Tvedgjl Roadworthiness certificate valid until 01/2027