Low loader semitrailer

DOLL Tieflader Forstmaschinen Lenk Funk Rampe

Condition: good (used), functionality: fully functional, overall weight: 57,600 kg, axle configuration: 3 axles, loading space length: 7,240 mm, loading space width: 2,750 mm, loading space height: 945 mm, color: blue, Year of construction: 2008, We have two of these lowbed trailers available Manufacturer: Goldhofer Type: STZ-VKL 3-34/80 A Year: 2008 Total weight: 54,000 kg Own weight: 21,000 kg Payload: 33,000 kg Iisdpfsxc U Nvjx Appsf Overall train length: 20,000 mm (max. telescoped 24,200 mm) Loading area (LxW): 7,300 mm x 2,750 mm (telescopic up to 4,200 mm) Tires: 235/75 R 17.5 Extra: Extension beam: 2x 6,000 mm

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements Iiedpok Af Svofx Appjf -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 12 kg, permissible axle load (axle 2): 12 kg, permissible axle load (axle 3): 12 kg, loading space length: 18,520 mm, loading space width: 2,750 mm, loading space height: 450 mm, total length: 18,520 mm, total width: 2,750 mm, total height: 450 mm, suspension: hydraulics, tire size: 245 / 70 R17.5 | Load index 146/146F, color: white, Year of construction: 2014, Colour: White Wheelbase: 136 cm Payload weight: 53,800 kg Cargo floor height: 45 cm Extendable Braked Manufacturer: Golfhofer Type: STZ-VP 3-55/80A VIN: WG0STZV39E0036631 Year of manufacture: 2014 Weights: King pin load: 35,000 kg Axle load: 12,000 kg Total axle load: 36,000 kg GVW: 71,000 kg Empty weight: 17,200 kg Loading capacity: 53,800 kg Measurements: Length: 15,520 mm + 3,000 mm extension Ijdexyh I Topfx Appeif Loading floor length: 6,300 mm + 3,000 mm Loading floor width: 2,750 mm Loading floor height: 450 mm Bogie height: 1,100 mm (+385 mm / -215 mm) King pin height: 1,390 mm Axles: BPW eco Pendulum axle All axles with hydraulic steering Tyres: 245/70R17.5 ABS / EBS Additional information: 1x Extendable Hydraulic operating system powered by the truck’s PTO Detachable gooseneck with front loading ramps Excavator trough Radio and cable remote control Lashing rings Stake pockets Wooden loading floor Stainless steel toolbox 2x Spare wheel + holder Working lamps Rear bumper with lights King-pin 3.5'' Central lubrication system Beka-Max = Further information = General information Year of manufacture: 2014 Axle configuration Tire size: 245 / 70 R17.5 | Load index 146/146F Axle brand: BPW Hydraulic Pendulum axles Suspension: Hydraulic suspension Rear axle 1: Double-tired; Max. axle load: 12 kg; Steered Rear axle 2: Double-tired; Max. axle load: 12 kg; Steered Rear axle 3: Double-tired; Max. axle load: 12 kg; Steered Weights Empty weight: 17,200 kg Payload: 53,800 kg GVW: 71,000 kg Functional Extendable superstructure: Yes Condition Technical condition: good Optical condition: good Financial information Price: On request

Condition: new, Year of construction: 2026, We have all Europe documents! Iedpfx Apsqx Nd Rjpoif We can delivery the trailers with FOB-EXW-CPT-CFR-CIF If you have an interest please contact with us; For European Countries; For African Countries;

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2007, loading space length: 15,350 mm, loading space width: 2,550 mm, loading space height: 350 mm, total width: 2,550 mm, suspension: air, Year of construction: 2007, Equipment: ABS, = Additional options and equipment = - Air suspension - Central lubrication = Further information = Axle configuration Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 9,000 kg; Steering Rear axle 2: Dual tires; Max. axle load: 9,000 kg; Steering Iisdpsynil Dsfx Appef Weights Unladen weight: 19,240 kg Payload: 18,760 kg Gross vehicle weight: 38,000 kg Functional Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request Further information Contact David F Middelman for more information.

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Iiodpfx Apov D Abtjpsf

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with angled front corners at 45° and rear taper of approximately 750 mm x 10° •3 pairs of lashing rings •Hardwood decking, 30 mm thick Extendable platform: •Extendable platform with rear taper of approximately 1,000 mm x 8° •Cutouts in the outer frame of the platform for attaching lashing straps •Hardwood decking approximately 48 mm thick, with chequered plate decking over the axles Two-piece steel ramps: •One pair of galvanized, two-piece steel ramps with approximately 48 mm thick hardwood decking •Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable •Maximum load per pair: approximately 40,000 kg Axles and tires: •BPW axles and suspension, 2 fixed axles, 1 steered axle •Technical axle load: 12,000 kg •Electro-magnetic reversing lock activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Braking system: •WABCO braking system according to EU regulations with EBS-E Paint finish: •First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component zinc dust primer •High-quality 2-component topcoat, single-color in MB 7350 Novagrau •Rear section metallized and painted in RAL 9010 Kingpin: •JOST kingpin with 2-speed gearbox for 24t lifting capacity (50t test load). Steel structure: •Steel structure made of high-strength fine-grain steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system according to EU regulations, lighting 24 volts •ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S and 15-pole sockets Included accessories: •One spare wheel with holder •One galvanized steel front bulkhead, approximately 400 mm high •Yellow-red air couplings on the galvanized connection strip at the front •4 chocks •One holder for a rotating beacon at the rear of the semi-trailer •Mounting in the rear area of the gooseneck for aluminum support ramps •Galvanized folding supports under the taper of the platform •Cover plates to bridge the gap between ramps and platform •White reflector tape according to EU regulations on the side, on the extension and at the rear in red •Electro-hydraulic unit at the rear, under the platform •On the gooseneck and on the ramps, one holder each on the left and right for warning signs including socket •Control valves for the ramps mounted on the right side of the semi-trailer •Aluminum side and rear walls on the gooseneck, approximately 2,440 x 400 mm •The rear, galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) •Four warning signs that extend by approximately 400 mm with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the platform Iedpfx Apjhlz S Njpoif •Extensions, galvanized, extendable by approximately 230 mm on each side •Square ladder rails 20 x 20 mm every 200 mm on the outer frame of the platform taper •A lacquered sand layer as an anti-slip coating on the chequered plates, over the kingpin and the platform •Load manometer for determining axle loads, including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel structure bead-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: used, empty load weight: 11,300 kg, maximum load weight: 29,700 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2006, suspension: air, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Special low loader for transporting commercial vehicles and construction machinery * Manufactured by the premium manufacturer Estepe from the Netherlands (Estepe type E0PL 24-41) * Years of experience in building such special low loaders for transporting trucks and construction machinery have meant that every detail has been taken into account * Of course with extendable low bed, hydraulic ramps and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with lifting/lowering * Central lubrication * GVW: 41,000 kg. * Empty weight: 11,300 kg * Payload: 29,700 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  Isdpsrtbb Sjfx Appeif We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, mileage: 288,000 km, power: 360 kW (489.46 HP), first registration: 10/2017, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, loading space length: 5,800 mm, loading space width: 2,490 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, parking heater, tail-lift, Scania R 490 Flatbed Crane Effer Radio Remote Control / Steerable Axle Full Air Suspension Sideboards Euro 6 For inquiries: 02626550 * Condition: very good * Power: 360 kW / 490 hp * Displacement: 12,742 cm3 * Euro standard: Euro 6 * Retarder * ABS * EBS * Differential lock, rear axle * Auxiliary drive * Hydraulics * AdBlue, right side * Storage compartment above driver / center / passenger * Electric windows, driver / passenger * Electrically heated and adjustable mirrors * Radio * Suspension: Air / Air (Full Air Suspension) * Electric sunroof * Multifunction steering wheel * Radio / CD / AUX / USB / Bluetooth * Air-suspended comfort driver's seat, driver / passenger * Seat heating, driver * 2x bunk * Refrigerator compartment under bunk * Automatic climate control * Auxiliary heater * Fog lights * Steerable axle * Lift axle * Duomatik * Rotating beacon on roof Body: Flatbed * Sideboards, aluminum Load compartment dimensions: * Load compartment length: 5,800 mm Isdezgy Acspfx Appsif * Load compartment width: 2,490 mm * Load compartment height: 800 mm Crane: Effer with radio remote control, year: 2017 Tires: 1st axle: 385 / 55 R 22.5, 35% air suspension 2nd axle: 385 / 55 R 22.5, 35% air suspension 3rd axle: 315 / 70 R 22.5, 70% air suspension 4th axle: 385 / 55 R 22.5, 35% air suspension, lift axle, steerable axle Meusburger MPA 2 trailer, flatbed, BPW axles Internal No. for inquiries: 0626551 * Body manufacturer: Meusburger * Type: MPA 2ra * ABS * 2-axle, air suspension * BPW-Eco Plus axles * Aluminum underrun protection * Drum brakes Internal dimensions: * Length: 7,130 mm * Width: 2,490 mm Tires: * Front axle: 245 / 70 R 17.5, air suspension / 35% * Rear axle: 245 / 70 R 17.5, air suspension / 35% ----Price: ,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and…? Typographical errors, errors and prior sale are reserved.

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood deck, 30 mm thick Loading platform: -Telescoping loading platform with rear slope of approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles, a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the slope and extending into the loading platform to accommodate the excavator arm, approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front in the loading platform (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) One-piece aluminum ramps: -A pair of one-piece aluminum ramps, approx. 2,500 x 600 mm -Ramp with spring lift mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle steered -Technical axle load: 12,000 kg -Electromagnetic reversing lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Included accessories: Iisdpfx Asiu Er Ajppsf -One spare wheel with holder in front of the front wall -2" kingpin -One galvanized steel front wall, approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of wheel chocks with holder on the front wall -Mounting in the rear area of the gooseneck for aluminum ramps -Widening, galvanized, extendable by approx. 230 mm on each side -Galvanized folding supports under the slope of the loading platform -One mounting for a rotating beacon on the rear of the trailer -White reflector tape according to EU regulations on the side, on the extension and red at the rear -On the gooseneck and on the rear panel, one mounting each on the left and right for warning signs including socket -On the gooseneck, aluminum side and rear panels that can be plugged in, approx. 2,440 x 400 mm -The rear galvanized slotting strips are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container -3 pairs of rung pockets for slotting strips 100 x 50 mm in the outer frame of the loading platform -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -A sand coating is applied to the diamond-patterned plates on the gooseneck and on the loading platform for slip resistance -Four warning signs, each extendable by approx. 400 mm, approx. 423 x 423 mm, with a position light -On the warning signs, a mounting for a rotating beacon -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel structure shot blasted, then the defined visible sur