Used Stas Tipper Semitrailers for sale (121)

Condition: used, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 57 m³, first registration: 12/2009, Chassis In aluminium Two fully automatic, welded I-beam longitudinal members with welded crossmembers. Chassis width 1,600 mm Axles and Suspension Disc Brake Weightmaster DC axle assemblies type DCA 3 x 9 t with DC air suspension, air bellows centrally mounted to the chassis longitudinal beam, lifting axle with starting aid and manual forced lowering, load pressure gauge, raise/lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% with steel rims, 11.75 x 22.5 ET 120, UNI wheel bolts Landing Gear Mechanical landing legs with two speeds, 2x 20 t support load; for air suspension we use swivelling feet Brake System To E.G. standard, two-line Wabco system, spring-loaded parking brake acting on two axles and EBS-D+ Wabco system, aluminium air reservoir system Electrical System In compliance with German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck-type taillights, 24-volt system, with 2x7 and 1x15-pin sockets, side marker lights, 1 separate halogen reversing lamp (mounted inside right body), 2 halogen work lamps mounted laterally approx. behind the landing gear (height of underrun protection) Tipping Body/Container Body fully welded inside Aluminium container, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 6 mm thick high-wear resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight version, rear wall universal door, straight version, with double-wing doors in 2/3-1/3 split; equipped with a grain chute, rubber seal for sealing the door gap, rear doors sealed on the sides and bottom, rear doors partially smooth-clad with aluminium, universal door operated automatically-pneumatically with separate lever, lockable, rear hoop made of aluminium, pivoting, two hold-downs with rubber buffers on the tipping body fixed to the frame at the front wall, Hydraulic System Hydraulic cylinder mounted on front wall with working pressure of 135 bar, make Edbro, 150 bar with fixed half 1", Kjdpfx Ajxfn Azsblenc Accessories 6 Parlok mudguards, aluminium spare wheel holder, foldable right-hand side underrun protection, 2 Nirosta toolboxes on the left, approx. 3 m aluminium ladder, 3 mid-mounted swing hoops raised by approx. 150 mm, additional central hoop holder for positioning (centrally and in front of the rear door) for a total of 2 hoops to increase loading width, sliding tarp with a central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with sliding tarp system, circumferential elastic cord at the rear end of the tarp, secured by two tension hooks on the rear swing hoop, walkway on the frame, tarp closure on the side with tension straps, rear tarp closure with large aluminium sheet cover and sliding tarp at the rear with welded-in elastic cord for protection against water ingress, robust foldable underrun protection in aluminium with two towing eyes left and right incl. locking pins, 2 longitudinal tension straps attached inside the body, etc... Offer and pictures non-binding

Condition: good (used), axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 2,150 mm, first registration: 05/2011, suspension: air, color: other, tire size: 385/65R22,5, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 7,340 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Year of body: 2011, Side wall material: Aluminium, Number of sides: 1 side, Axle type: MERCEDES-BENZ, 55m³ ALU, COIL = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 10 mm; Tire tread right: 8 mm Axle 2: Tire tread left: 14 mm; Tire tread right: 9 mm Axle 3: Tire tread left: 10 mm; Tire tread right: 7 mm Dimensions Dimensions (L x W x H): 1,090 x 255 x 375 cm Weights Curb weight: 7,340 kg Payload: 31,660 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our selection covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing Knodpfsw S Dfmex Abljc • Reliable business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and the complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2003, suspension: air, color: white, tire size: 385/65R22.5, Year of construction: 2003, = Additional Options and Accessories = - Rear Doors = Further Information = Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF Brakes: Disc Brakes Suspension: Air Suspension Kedpfswbpwzjx Ablsnc Rear Axle 1: Lift Axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Dimensions Dimensions (L x W x H): 1172 x 250 x 400 cm Weights Unladen weight: 6,060 kg Payload: 32,000 kg GVW: 38,000 kg Functional Tipper: Rear Maintenance, History, and Condition General Technical Inspection (GTI): inspected until January 2026 Technical condition: very good Visual condition: very good Further information Contact Bart Mostert or P. Mostert for further information.

Condition: used, overall weight: 36,000 kg, maximum load weight: 29,630 kg, axle configuration: 3 axles, loading space length: 9,800 mm, loading space width: 2,380 mm, loading space height: 2,300 mm, loading space volume: 55 m³, first registration: 04/2019, Year of construction: 2019, total width: 2,550 mm, total height: 3,829 mm, Equipment: ABS, 3-Axle Stas S 300CX ALU Tipping Body 55m³ VIN: CXK0000429 *Body with fire damage Chassis / Attachments: * Air suspension / Raise + Lower * Lift axle 1st axle * Alcoa Dura-Bright aluminum wheels * Jost landing legs * Tyres: 385/65 R.22.5 * Remaining tread depth: 1=60% 2=60% 3=50% * 3 x SAF tridem axles with disc brakes * Folding underrun protection * STAS PVC toolbox Body: * Aluminium tipping body * Steel chassis * Volume: approx. 55 m³ * Standing platform with access on the left * Roll tarp * HYVA cylinder, 150 bar max. pressure * Wabco Smart-Board * Rear door opens to the left / mud-tight * Pendulum tailgate with quadruple hydraulic lock * Vibrator Weights: * Gross weight: 36,000 kg * Payload: 29,630 kg * Unladen weight: 6,370 kg Miscellaneous: * German registration * Safety inspection valid until 10/2025 * Body with fire damage New roadworthiness or safety inspections as well as weight reductions/increases available on request. We are happy to assist you in obtaining export/temporary registration plates, as well as organizing the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors, changes, prior sale, and errors excepted! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sales of new and used commercial vehicles. On 11,000 m² you will find a wide variety of vehicles. Our company philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person to support them with the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to help you with loading your purchased vehicles. Knedewtkl Rspfx Abljc Organizing special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to help you obtain export or short-term license plates. Customs clearance We are happy to assist you with customs formalities.

Condition: used, overall weight: 36,000 kg, maximum load weight: 29,990 kg, axle configuration: 3 axles, loading space volume: 52 m³, first registration: 06/2024, Year of construction: 2024, total width: 2,550 mm, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Kodpfxsupqi Ej Abljnc Body A-board on tipper (not f

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 7,860 mm, loading space volume: 60 m³, first registration: 06/2013, suspension: air, Year of construction: 2013, Equipment: ABS, = Additional Options and Accessories = - EBS (Electronic Braking System) - Lift axle - Air suspension - SAF axles - Disc brakes = Further Information = Axle configuration Axle brand: SAF Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40%; Brakes: Disc brakes Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40%; Brakes: Disc brakes Rear axle 3: Max. axle load: 9,000 kg; Steered; Tyre tread left: 40%; Tyre tread right: 40% Dimensions Dimensions (L x W): 1069 x 255 cm Weights Unladen weight: 6,750 kg Payload: 35,250 kg Gross vehicle weight: 42,000 kg Functional Tipping: Rear Condition Technical condition: very good Visual condition: very good Damages: none Identification Registration number: OL-41-ZK Additional information Please contact John Hesselink or Christel Hesselink for further information. Kodpfx Aswi Ikpeblonc = Company Information = Contact us for more information!

Condition: used, axle configuration: 3 axles, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, first registration: 10/2014, Chassis light version In aluminum (15-6-12) Two fully-automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm. Axles and suspension: 430 mm disc brakes, "Off Road Version." SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged along the longitudinal chassis beams, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, raising-lowering valve. Tyres and Wheels Kodpfx Abjxfn Dlolenc 6 wheels with 385/65 R 22.5 tyres approx. 50% tread remaining, with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims. Landing Legs Mechanical version with single-side operation, 2-speed with swing foot for air suspension, 2x20t (ton) static load. Brake System According to E.G. standard, dual line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smart Board info center, aluminum air tank system. Electrical System In accordance with StVZO regulations with 2 five-chamber lights, type Aspöck Ecopoint 2, 24 Volt system with 2x7-pin and 1x15-pin sockets, with side marker lights, 2 separate LED reversing lights at the rear, 2 separate LED work lights on the landing legs. All air and electrical lines neatly routed in plastic tubing! Tipping Body / Tipper Body, fully welded inside Aluminum tipper body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, fully welded; floor 8 mm thick wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as double-wing door in straight design with 2 wing doors in 2/3-1/3 division with a grain chute. Rear hoop in aluminum, pivoting, two hold-down devices with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System: tipping cylinder with "cardan" mount, Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, brand Edbro, with approx. 2.5m hydraulic hose and loose 1" connection half, tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across the full vehicle width mounted on side protection, ALU spare wheel holder, right-hand side underrun protection, foldable, large tool box type 860, approx. 3 m aluminum ladder, 3 central aluminum swing hoops raised approx. 150 mm, roll tarp with central translucent strip and separate reinforcements in wear areas in approx. 660 g/m2 quality with roll tarp system, continuous elastic rope at the rear edge of the tarp with two tension hooks to fix to the rear swing frame, catwalk on the tipper body with access on the left, tarp closure on the side with tension belts, tarp closure on the rear with welded-in elastic rope to prevent water ingress, robust foldable underrun protection in aluminum with two towing eyes on left and right incl. retaining pins, 2 "Clear-Pass" mud flaps on the mudguards according to EU standard, etc. Offer and photos subject to change.

Condition: used, axle configuration: 3 axles, wheelbase: 8,710 mm, first registration: 05/2014, suspension: air, color: green, tire size: 385/65, Year of construction: 2014, Axle Configuration Tire Size: 385/65 Axle Brand: SAF CD Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Alloy Wheels; Lift Axle; Max. Axle Load: 9000 kg; Left Tire Tread: 40%; Right Tire Tread: 40% Rear Axle 2: Alloy Wheels; Max. Axle Load: 9000 kg; Left Tire Tread: 60%; Right Tire Tread: 60% Rear Axle 3: Alloy Wheels; Max. Axle Load: 9000 kg; Left Tire Tread: 60% Right-hand tire tread: 60% Dimensions Dimensions (L x W): 1162 x 255 cm Weights Unladen weight: 6,700 kg Payload: 32,300 kg GVW: 39,000 kg Identification Knedpjuukzlsfx Abljc License plate: ON-49-HN Further information Contact Bob Beukers for further information.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2000, Year of construction: 2000, Stas S 3-SA334 K Year of manufacture: 2000 : 34,000 kg Air suspension 3 axles Aluminum tipper Internal number: 25A032 Kjdpfx Abewt Ia Eelenc

Condition: used, overall weight: 36,000 kg, maximum load weight: 29,320 kg, axle configuration: 3 axles, loading space length: 11,364 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 60 m³, first registration: 07/2018, next inspection (TÜV): 05/2026, Year of construction: 2018, total width: 2,550 mm, total height: 3,820 mm, Equipment: ABS, 3-Axle Stas S 300ZX AgroSTAR 60 m³ Aluminium Tipper Body VIN: 000791 Chassis / Attachments: * Full aluminium construction * Air suspension / lifting and lowering function * First axle lift axle * Automatic lowering during tipping operation, can be locked manually * Alcoa Dura-Bright aluminium wheels * Aluminium landing legs * WABCO Smart Board * Tyres: 385/65 R 22.5 * Tyre tread remaining: 1 = 30/50%, 2 = 30%, 3 = 60/30% * 3 x SAF axles with disc brakes * STAS PVC toolbox * Saddle height: approx. 1.15 m Knodew Ua Ayopfx Abloc Body: * Agro STAR aluminium tipper body * Capacity: approx. 60 m³ * Load pressure gauge * Roll tarp * Work platform with walkway / ladder on left side * Roll tarp * Hyva front ram, max. pressure 170 bar * Combination swing/flap tailgate with 3 rotary latches, split 2/3 : 1/3 * Grain chute * Rear wall as pendulum door with 2+2 pneumatic hook locks Weights: * Gross vehicle weight: 36,000 kg * Payload: 29,320 kg * Unladen weight: 6,680 kg Other: * German registration * Valid technical inspection (HU/SP) until 11/2025 * Excellent condition New main inspections / safety checks or weight downgrades/upgrades are available on request. We are happy to assist with the procurement of export/temporary registration plates, as well as the delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for misprints & typing errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 m², a wide variety of vehicles are available. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our clients an excellent full-service package and provide a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist in loading your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Temporary/export registration plates We are happy to assist in procuring export/short-term registration plates. Handling customs formalities We are also happy to assist with customs matters.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 11,744 mm, loading space width: 2,335 mm, loading space volume: 68 m³, Equipment: ABS, Kingpin load (t) 12 Axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Technical permissible total weight 39=12 9 9 9 Internal height front (mm) (IHF) 2460 Internal height rear (mm) (IHB) 2460 Overall width (mm) 2550 Wheelbase (mm) 7753 Overall length (mm) 13127.6834 Chassis Chassis material: Steel Tire size: 385/65R22.5 Axles: SAF Intra Brake type: SAF - SBS 2220 Optional 1st axle with lift axle and traction control Traction control activated via Button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator connected. Air bellows protection plate. Wabco Trailerpulse tire pressure monitoring. ECAS air suspension with raising and lowering valve. Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis. Pneumatic coupling head: European Palm coupling. Alcoa Dura Bright rims. Chrome-plated wheel nut caps. Landing gears: Steel geared landing gears mounted at the front of the chassis, type JOST MODUL, with one-sided operation and 2 speed settings. Manual underrun bar operation. Black underrun bar mud flaps with STAS logo, mounted across the entire width of the underrun bar. EBS control panel: Left side, in front of the axles. Plastic toolbox on the left. Lighting type: ECOLED. II Work lights (switch operated) with two LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp holder. Work lights (switch operated) with two LED reversing lights at the front, left and right in the direction of travel, mounted in the area of the landing gear. Tilt cylinder brand: Hyva Tilt cylinder type: Hydraulic cylinder with small casing. Cylinder tilt angle: Normal ±47° Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 8130 Tilt cylinder max. pressure: 170 Hydraulic coupling: Swivel coupling, size 1, female, hose 2,100 mm Standard smart board Aluminum leaning ladder, 2.8 m long, mounted on the right in the direction of travel. Broom and shovel holders are positioned on the front wall, left in the direction of travel. Broom and shovel holders, each with three holders, are positioned on the chassis, left in the direction of travel. Loading pressure gauge Ø 100 mm - on the front Mounted on the chassis Safety device chassis - body rubber pads Air and electrical console right Body Rear wall type wing doors A-plate foldable on the door, on the right in the direction of travel Floor made of 5 mm HB450 Rubber pads attached below the floor cross members End wall made of 3 mm HB450 Side wall made of 4/3 mm HB450 Rear wall made of 3 mm HB450 Number of hinges on rear wall: 3 pairs of door hinges Design of wing door: 1/2 to 1/2, with 1 scrap lock Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Opened door leaves are secured with a chain Rear wall seal: Rubber seal in the lower area, extending to 1,000 mm on the side Additional rear wall locking: Pneumatic, double-acting Operation of the Additional locking mechanism manually operated on the side of the dashboard. Tarpaulin wrap design: Wrap tube. Type: Steel bow, trapezoidal design, foldable. Number and position of bows: 3. Center bow, evenly distributed across the entire loading area. Knedpfxswlxr No Abljc Tarpaulin holders, rotatable, removable. 3. Front wall tarpaulin tube support in

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 8,570 mm, loading space volume: 56 m³, first registration: 05/2008, suspension: air, color: white, tire size: 385/65R22,5, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - 2x grain slides - ALU chassis - EBS (Electronic Braking System) - Lift axle - Steering axle - Air suspension - Disc brakes - Central lubrication = Remarks = Many parts renewed, 4 new tires, new MOT - immediately operational Kedpfx Ajt T T S Reblenc Stas 56 m³ tipper Year of manufacture: 2008 Volume: 56 m³ Tailgate/door combination 9-ton axles, disc brakes Axle 1: lift axle Axles 2 + 3: steered Cover tarpaulin ABS/EBS Very neat condition MOT valid until 07/2025 = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle make: Mercedes Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Max. axle load: 9,000 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 3: Max. axle load: 9,000 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100% Dimensions Dimensions (L x W): 1,151 x 255 cm Weights Unladen weight: 7,700 kg Payload: 31,300 kg Gross vehicle weight: 39,000 kg Functional Tipping direction: rear Condition Technical condition: very good Optical condition: very good Identification Registration: OV-11-KN = Company Information = Contact us for more information!

Condition: used, axle configuration: 3 axles, loading space length: 11,400 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 63 m³, first registration: 06/2009, Chassis Nickchassis cranked (approx. 80-100 mm lower) Made of aluminum, high-quality ALU-MG-silicon alloy, two fully automatic welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm! Axles and Suspension Wheelbase optimized for better trailing performance Jost (DCA) axle units 22.5", 3 x 9 t axles with DCA air suspension, third axle liftable, first axle with start-assist and electric actuation (switch in tractor already available), raising and lowering valve for air suspension, Wabco SmartBoard. Kodpfx Absxfn Droljnc Tyres and Wheels 6 wheels, tyres in size 385/65 R 22.5, approx. 50-60% tread on Alcoa aluminum rims, satin finish, ET 120, 11.75 x 22.5 Landing Legs Mechanical landing legs with compensation feet, single-side operation design and 2-speed, 2x20 t support load Brake System According to E.E.C. standards, dual line system Westinghouse, spring brakes affecting two axles and Wabco EBS electronic system with RSS (Roll-Stability-Support), premium modulator, aluminum air tanks. Electrical System Built to StVZO regulations with 2x five-chamber lamps type Aspöck, 24-volt system with 2x 7-pin and 15-pin sockets, side LED contour lights, halogen RF Ix at rear and 1x on stand at the bulkhead separately switchable from outside, Volvo reversing camera (without tractor equipment), all air and electrical lines are neatly routed through plastic conduits! Tipper Body/Tipper Bin Tipper bin fully welded inside, aluminum construction, side walls 30mm/600mm plank profiles, 3 mm inside, 2 mm outside, floor 8 mm extra reinforced wear-resistant (5383H34-HB110) and 45-degree profile, front wall 4 mm straight with interior access ladder, rear wall as double-wing door in straight design with 2 doors, 1/2-1/2 division, each with a grain chute, rear doors partly aluminum smooth cladding, rear crossmember foldable from ALU, two tie-downs with rubber buffer on tipper body fixed to frame at bulkhead, Hydraulic System with Large Sleeve (new in 8.2025) Hydraulic cylinder mounted on bulkhead with operating pressure of 150 bar, make Edbro 150 bar, approx. 2.5m hydraulic hose with quick disconnect 1", tipping angle approx. 48 degrees Accessories 6 PVC mudguards with 2 rubber mud flaps at the rear, retractable splash flap on underrun protection, side impact protection according to StVZO, aluminum spare wheel holder, foldable underrun protection ALU with towing eyes, roof tarpaulin with side tension straps, 2 longitudinal tension straps from catwalk, 30 mm tarpaulin pipe welded centrally into the tarpaulin, rear tarpaulin rest made of aluminum sheet approx. 150 mm, 4 aluminum swiveling bows, 2 plastic toolboxes type 800, approx. 3 m aluminum ladder, catwalk on tipper body with access left and right, 2 plastic chocks with bracket on chassis, small pull-out ladder at rear, separate ALU discharge chute with tarpaulin sack, etc. Offer and pictures are non-binding.

Condition: used, overall weight: 42,000 kg, maximum load weight: 32,246 kg, axle configuration: 3 axles, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, first registration: 03/2025, next inspection (TÜV): 03/2026, Year of construction: 2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, STAS 3-axle HardoX steel tipper, 86 m³ First registered March 2025, new vehicle Dimensions (L x W) (LxWxH) 13,110 x 2,350/2,450 x 2,770 mm (conical design) Unladen weight 9,640 kg Floor made of 5 mm Hardox HB450 steel Bulkhead and side walls made of 3 mm Hardox HB450 steel Pneumatically retractable rear underrun protection Straight bulkhead, interior with access Rear portal doors 50:50, pneumatic re-release Reinforced roll-up roof tarpaulin HYVA Alpha tipping ram, low-pressure 2 pneumatic vibrators JOST crank seat supports, full load SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE WABCO Trailer EBS with anti-skid system (RSS) WABCO Smartboard Lifting and lowering device Automatic tipping lowering 6 tires 385/55 R 22.5 Kjdpswafd Uefx Ablenc ALCOA Dura-Bright high-gloss alloy wheels Aluminum stepladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING, also available immediately with our full-service rental service -----

Condition: used, overall weight: 42,000 kg, maximum load weight: 35,580 kg, axle configuration: 3 axles, loading space length: 10,485 mm, loading space width: 2,474 mm, loading space height: 1,895 mm, loading space volume: 49 m³, first registration: 05/2021, Equipment: ABS, STAS S300CX 49 m³ In operation since 5/2021 Lifting axle ADR: EXII, FL, OX, AT Loading area: 10,485 x 2,474 x 1,895 mm Wheelbase 1,410 mm Axles 9 tonnes SAF axles Combination door Tarpaulin Disc brakes Tyres 385/65 R22.5 Condition: 1st axle 10 mm 2nd axle 11 mm 3rd axle 12 mm Spare wheel Operating weight 6,420 kg Gross weight 42,000 kg NEARLY NEW? ONLY USED FOR AGRICULTURAL PRODUCTS! More at: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALE OF TRUCKS AND CONSTRUCTION MACHINERY Kjdpfew I Ivzox Abljnc TRUCK SERVICE TYRE SERVICE TRUCK WASH TACHOGRAPH INSPECTION

Condition: used, overall weight: 39,000 kg, maximum load weight: 33,110 kg, axle configuration: 3 axles, loading space volume: 46 m³, first registration: 01/2015, Equipment: ABS, Stas 3-axle grain tipping trough, volume approx. 46m³, portal doors with 2x grain pushers, roll tarpaulin, platform, air suspension, lift axle, disc brakes, BPW axles, aluminum rims, Wabco SmartBoard, EBS, ABS Knodpow Er Rrofx Abljc

Condition: new, overall weight: 36,000 kg, maximum load weight: 30,090 kg, axle configuration: 3 axles, loading space volume: 47 m³, Year of construction: 2024, total width: 2,550 mm, Equipment: ABS, agroSTAR 47.6 m³ Chassis type: V-Chassis National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1175 Chassis width (mm) 1400 Loading width (mm) 2475 Standard chassis: 080 Technical permissible total weight 39=12 9 9 9 Front interior height (mm) (IHF) 2165 Rear interior height (mm) (IHB) 2165 Volume (m³) 47.6 Overall width (mm) 2550 Wheelbase (mm) (WB) 5800 Overall length (mm) 10259.9978 Chassis Chassis material: Aluminum Tire dimensions 385/65R22.5 Loading length (mm) 8880 Axle manufacturer JOST (STAS manufacturer selection) Brake type JOST - DCA-T7 Offset (ET) 120 Optional 1st axle with lifting axle and traction aid Activation of traction aid via button in the truck Optional 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle, controlled via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, manually lockable via Smartboard and switch on the chassis Wheels Alcoa Dura Bright Tires type Regional spacing Wheel nut caps Chrome with STAS logo Ksdpotb Tqpefx Ablsnc Landing gears Weweler: Steel geared landing gears, type Weweler, with leveling feet, single-sided operation, and 2 Speed levels Manual underride guard operation Towing eye: 1 piece, left in the direction of travel Black underride guard mud flaps with STAS logo, mounted across the entire width of the underride guard Fixed underride guard mud flap attachment Underride guard cover with covers Handle on the underride guard EBS control panel: Left in the direction of travel, in front of the axles Toolbox Position of toolbox: Right in the direction of travel, in front of the axles Material of toolbox - right in front of the axles: Plastic Dimensions of toolbox - right in front of the axles: 860x520x500 Type of fender: Domar STAS with white line Number of mud flaps on the fender: 2 pieces Type of mud flaps: Asphalt Manufacturer: Aspöck Type of lighting: EUROPOINT III - LED Work lights (operated via switch): 2 pieces LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp holder Work lights (operated via switch): 2 pieces LED reversing lights at the front, left and right in the direction of travel Tipping cylinder manufacturer: Hyva Tipping cylinder type: Hydraulic cylinder with small casing Cylinder tilt angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 6480 Tipping cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Type: Smartboard: Standard Air connection: Left in the direction of travel, on the lamp holder Aluminum leaning ladder, 3 m - right in the direction of travel Leaning ladder attachment for rear entry with hooks Broom and shovel holders with 3 holders each, mounted on the chassis on the left in the direction of travel Two plastic wheel chocks including brackets Chassis safety device - body: Rubber plugs (not for FSS 74 and 86) Air and electrical console, right in the direction of travel assembled Construction End wall inclination (°) 20 Rear wall inclination (°) 90 Rear wall type combi-door A-plate on trough (not foldable) - right side Incline of the bottom chord profile inside (°) 45 Floor 8 mm ALU - 110 Brinell Rubber pads attached below

Condition: good (used), axle configuration: 3 axles, wheelbase: 6,140 mm, first registration: 07/2010, suspension: air, color: red, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Automatic tarpaulin - EBS (Electronic Braking System) - Remote control for Cargo Floor - Lift axle - LED lights - LED work lights - Air suspension - Rolling tarpaulin cover - Toolbox = Remarks = Stas S300CX Year of manufacture: 2010 Lift axle Wabco Smartboard Automatic roof tarpaulin Knodpfx Ajw Su D Hsblec APK/TÜV valid until 12-2025 = Further information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 40% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Dimensions Dimensions (L x W): 910 x 255 cm Weights Unladen weight: 5,010 kg Payload: 33,990 kg Gross vehicle weight: 39,000 kg Functionality Tipping direction: Rear Maintenance APK (Roadworthiness Inspection): valid until 12/2025 Condition Technical condition: good Optical condition: good Damages: none Identification Registration number: OP-92-BJ Further information Please contact John Hesselink or Christel Hesselink for more information. = Company information = Contact us for further information!

Condition: used, overall weight: 39,000 kg, maximum load weight: 31,090 kg, axle configuration: 3 axles, loading space length: 13,320 mm, loading space width: 2,475 mm, loading space height: 2,360 mm, loading space volume: 78 m³, first registration: 11/2017, next inspection (TÜV): 11/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Aluminum box body, approx. 78 m³, aluminum wear plates on the left and right rear, aluminum chassis, loaded fifth wheel height 1150 mm, rear double-wing door combination with espagnolette lock/pendulum flap, pneumatic rear wall closure, 1 grain pusher with cover, "EDBRO" tipping ram, roll-up tarpaulin, rear view camera, JOST landing gear (front and rear), ABS, EBS, JOST axle(s), electronic air suspension system, lift axle, on/off switch for tipper lowering, 2 storage boxes, vehicle can be covered and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops! The vehicle can be covered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us! Knedpowm T E Hofx Abljc

Condition: used, overall weight: 42,000 kg, maximum load weight: 34,725 kg, axle configuration: 3 axles, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, first registration: 10/2024, next inspection (TÜV): 10/2025, Year of construction: 2024, total width: 2,550 mm, total height: 3,672 mm, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Ksdpovuhcqsfx Ablonc Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: used, axle configuration: 3 axles, wheelbase: 1,310 mm, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, first registration: 05/2013, suspension: air, tire size: 385/65R22,5, Year of construction: 2013, Tyre size: 385/65R22,5 Suspension: air suspension Ksdpfx Ajwzkx Toblsnc Drive: Wheel Empty weight: 5.590 kg Carrying capacity: 33.410 kg GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: used, axle configuration: 3 axles, wheelbase: 8,780 mm, loading space length: 11,370 mm, loading space width: 2,480 mm, loading space height: 2,070 mm, first registration: 07/2012, suspension: air, color: grey, tire size: 385/65R22.5, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - Toolbox = Further information = Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Left tire tread: 20%; Right tire tread: 20% Rear axle 2: Left tire tread: 30%; Right tire tread: 30% Rear axle 3: Left tire tread: 40%; Right tire tread: 40% Dimensions Dimensions (L x W): 1246 x 255 cm Weights Unladen weight: 6,780 kg Payload: 32,220 kg Gross vehicle weight: 39,000 kg Knedpswqqknefx Abljc Identification Model number: S300CX / ALU TIPPER 60 m3 / BPW = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We make every effort to provide correct information but no rights can be derived from the published texts.

Condition: used, overall weight: 39,000 kg, first registration: 01/2013, next inspection (TÜV): 07/2025, Equipment: ABS, Volume tipper 59 cubic meters Full aluminum Empty weight 7570 kg SAF axles with disc brakes Kodpfx Abevwhvpslenc Tires 60% Good condition Belgian registration Price 23,900 euros net

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 8,710 mm, loading space volume: 50 m³, first registration: 05/2012, suspension: air, color: green, tire size: 385/65R22,5, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - Alcoa Dura Bright wheels - Aluminum rims - EBS - Rear doors - Lifting axle - LED lights - LED work lights - Alloy rims - Air suspension - Roll-top tarpaulin cover - SAF axles - Disc brakes = Remarks = Stas S300CX Year of construction 2012 50m3 BPW wheels, tarpaulins Combination of rims/doors Aluminum rims Coverage ABS/EBS APK 05/2025 = Additional information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9000 kg; Left tire profile: 60%; right tire profile: 60% Rear axle 2: light alloy rims; Max. axle load: 9000 kg; left tire profile: 60%; right tire profile: 50% Rear axle 3: light alloy rims; Max. axle load: 9000 kg; left tire profile: 60%; right tire profile: 50% Dimensions Dimensions (L x W): 1149 x 255 cm Weights Unladen weight: 6,570 kg Payload: 32,430 kg GVW: 39,000 kg Functional Tipper: Rear Condition Technical condition: very good Visual condition: very good Knedpfjufqdmsx Abloc Identification License plate: OL-56-RN = Company information = Contact us for more information!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Knjdpfxefi Nmuo Abloc Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th