Used Stas Ferrostar Semitrailers for sale (74)

Condition: used, empty load weight: 7,390 kg, axle configuration: 3 axles, first registration: 09/2026, loading space length: 8,912 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 47 m³, total length: 10,289 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 4,490 mm, color: silver, Year of construction: 2025, mileage: 2,000 km, gearing type: mechanical, fuel consumption (urban): 1,028 l/100km, lifting height: 3,800 mm, Equipment: ABS, Unladen weight: 7390 kg, cargo space (L W H): 8,912 mm x 2,325 mm x 2,285 mm, tire size: 385/65 R22.5, cargo space volume: 47 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, lift axle, electronic braking system EBS, grain conveyor, tarpaulin roof, aluminum rims, storage compartment, errors and changes excepted. Vehicle is sold on consignment. Vehicle location is in Steyr, Upper Austria. Vehicle is without registration – new vehicle. Gujdpfxez Awu Ie Ahvji

Condition: new, maximum load weight: 30,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,664 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 52 m³, Year of construction: 2025, Brake system: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles controlled via the EBS-E system ----Suspension: * Air suspension with lift and lower system (automatic lowering during tipping operation—can be manually locked via SmartBoard—as well as via switch on chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Starting aid is activated via button in the truck—no truck-side installation required—as well as by pressing the brake pedal three times Gedpfx Ahowgg Uzsvoui * 2 x 7-pole and 1 x 15-pole sockets * Aspöck LED lighting * 2 LED reversing lights (controlled by reverse gear) * Each side in the area of the landing gear supports has 1 LED work light ----General Attachments: * Aluminum air tank * Weweler hand-crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox approx. 860 x 520 x 500 mm on the left side * Air gun with 16 m hose reel in the toolbox * Enclosed single plastic mudguards * 1 dust bag including mount on the right side * 3 m aluminum ladder stored on the right above the mudguards * Shovel and broom holder on the left above the mudguards * Load pressure gauge mounted at the front of the chassis * Access stairs and standing platform mounted on the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping body—rectangular—with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted inside the tipper body on the front wall, left side * Smooth inner and outer side walls * Double-walled 600 mm side wall profiles—30 mm thick—3 mm inner and 2 mm outer layer * Side wall profiles are fully welded inside, 90° corners using an angle profile between floor and side walls, allowing for full floor width utilization * Top rail, 90 mm wide * 6 mm wear-resistant aluminum floor in 110 Brinell quality * Combination double-wing rear doors—straight version with double door hinge and reinforcement profiles, each with 1 grain chute and all-round rubber seal * When opened, the doors are secured with chains, allowing the doors to lie as flat as possible against the side walls * 4-position door locking hooks at the bottom open automatically during tipping—can be pneumatically locked via valve on the frame ----Roll tarp: * Roll tarp—in RAL 9005 deep black—with three side tension straps * Trapezoidal tarp support, 150 mm high, on front wall and tailgate ----Load volume: * Load volume 51.8 m³ ----Fifth-wheel height: * Fifth-wheel height 1,150 mm ----Information: * Body and chassis painted with acrylic paint in RAL 9005 deep black * --Technically permissible gross weight of 39,000 kg-- * New vehicle without first registration with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Condition: used, axle configuration: 3 axles, Year of construction: 2008 Gusdoz A Hlgspfx Ahvoi Empty weight: 4.890 kg Carrying capacity: 34.110 kg GVW: 39.000 kg

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Godpfxoupqi Eo Ahvsui Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Guodpfx Ahjfi Nmujvei Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 47 m³, total length: 10,259 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: ABS, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm Gujdpfx Ahoy Dmvmjvsi * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, Semi-trailer, STAS, 92 m3 capacity, with a 21-slat moving floor, ideal for waste transport. Features include an adjustable, sealed hydraulic tailgate and a closed roof covering 2/3 of the trailer. Three-axle disc brake system with a steering third axle. Includes a front bulkhead. Year of manufacture: 2005. Valid inspection until 31.10.2020. - DEALER: INTERDRIVE SRL - PARMA. Gusdpfx Ahsh I Id Novei

Condition: used, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, loading space length: 10,610 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5748 Rental vehicle – available for purchase, rental, or lease with an option to buy, upon agreement. STAS 60 m³ sliding floor trailer with Cargo Floor and remote control – for rent! ----* Manufacturer: Stas * Type: Farmstar * First registration: 04/2026 * Color: Body RAL 9007 grey-aluminum, chassis RAL 9005 black, tarpaulin black * Volume: 60 m³ (approx. 10.61m long x 2.475m wide x 2.30m high) * Gross vehicle weight: 39,000 kg (technical) / 36,000 kg (permissible) * Unladen weight according to vehicle registration: 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle: lift axle / starting aid / disc brake * Tires: 385/65R 22.5 NEW on Speedline Diamond aluminum rims * Suspension: Air suspension with raising and lowering function * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-slat system with additional plastic profiles below the floor profiles * End caps, floor made of stainless steel * Floor 6mm ribbed * Moving bulkhead with stainless steel handles * Control box at the rear, left side * Control platform with access ladder at the front, right and left side * Hydraulic connections at the front with 3m hoses (with additional connection option to the support legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2x twist locks and 1x pneumatic locking * Side walls in smooth design, inside and outside (grain version), welded * Roll-up tarpaulin (680g/m²) with central locking * 3x crossbeams * Individual fenders * Full-load supports * Toolbox at the rear, right side * Shovel and broom holder, left side * Smartboard * TPMS tire pressure monitoring system * Aluminum ladder, right side * Extendable ladder at the rear, right side * Aluminum rear impact guard * One-piece aluminum sheet, foldable, for protecting the rear lights * 2x LED work lights (left + right) * 2x LED reversing lights at the rear * 2 x 3 LED?s in the door closure crossbar Note regarding potential errors in the advertisement: Gedpfx Aoyz H S Aohvsui Despite careful preparation of the advertisement, isolated errors may have occurred in the text or the details provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2012, loading space volume: 58 m³, total length: 11,490 mm, total width: 2,550 mm, suspension: air, wheelbase: 8,210 mm, color: red, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting axle - LED lights - LED work lights - Air suspension - Roll cover - SAF axles - Disc brakes = Additional Information = General information Year of construction: 2012 License plate: OL-35-SK Axle configuration Brakes: Disc brakes Suspension: Air suspension Gsdpfsyz It Isx Ahvjui Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 7,000 kg Payload: 36,000 kg GVW: 43,000 kg Functional Tipper: Rear Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = Would you like to finance this vehicle? No problem. We can quickly arrange an affordable financing lease agreement for you with a term of 12, 24, 36, 48, or 60 months. You can find all photos and further information at [website address] or contact us directly.

Condition: used, functionality: fully functional, machine/vehicle number: YE6S300ZX00080084, empty load weight: 7,810 kg, maximum load weight: 34,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 09/2027, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R 22,5, color: black, Year of construction: 2024, Equipment: ABS, Item number: #31160 Lift axle Portal doors Disc brakes Godpfx Aez R Sh Eehvsui Cargofloor load floor, 8 mm Platform with ladder Moving side wall Pneumatic door locking system Simple twist locks on the outside 12 pairs of recessed lashing rings Roller cover Lift axle A1/A3 Grain discharge chute Holder for ladder/broom Wabco Smart Board 2x LED reversing lights ABS/EBS Weweler kingpin supports Raising/lowering mechanism 2x toolboxes ASW (anti-spray flaps) Side protection cover Axle manufacturer: Jost Axles: 3 Tires: 358/65 R 22.5 Body dimensions: 13,513 x 2,475 x 2,700 mm Leasing or financing options available upon request!

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2027, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "EXTREME" First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked design Floor made entirely of 6 mm Hardox steel HB450 Gsdsxriu Eepfx Ahvjui 4 crusher bars evenly distributed along the entire floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Slanted front wall, interior with access ladder Deflector plates along the entire length of the sidewalls (for mudguard protection) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x air vibrators mounted under the body SAF axles with large 430 mm disc brakes 1st axle: lift axle with traction aid WABCO trailer EBS with rollover stability control (RSS) WABCO Smartboard Automatic tipping lowering feature Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Holder for shovel and broom Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING – immediately available from us as a FULL-SERVICE RENTAL as well.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINUM chassis, Jost axle assemblies 22.5" / off-road, 3 axles with air suspension, 9 tons per axle, 1st axle lift with starting aid and electric operation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tires size 385 / 65 R22.5 on STEEL rims, 2" kingpin screwed into a 10 mm thick plate, mechanical design of the trailer supports with single-sided operation, braking system according to E.E.G. standard, dual-line Westinghouse system, spring accumulators acting on two axles, and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air tanks, electrical system according to STVZO with 2 five-chamber lights, type Aspöck, 24-volt system, aluminum tipper body, hydraulic system manufactured by Edbro with approximately 2 m of hydraulic hose, 6 PVC fenders with rubber mud flaps, side impact protection, underrun protection, walkway on the frame, fully welded, long-life rubber sealing, spindle locks on the rear door, preparation for a soil compactor, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ACCORDING TO CUSTOMER REQUIREMENTS Gjdpfxeu Dvw Es Ahveui COLOR CAN BE FREELY CHOSEN +590¤ Delivery costs ?Images and offers are subject to change?

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 52 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Gsdpsuar Amsfx Ahvsui Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: used, empty load weight: 6,340 kg, overall weight: 39,000 kg, Year of construction: 2002, Equipment: ABS, STAS SA339K/ALU Year built: 2002 Axles 3 ABS Gsdpfxjvdru Ae Ahveui Air Total weight: 39000 kg Empty weight: 6340 kg

Condition: used, empty load weight: 11,245 kg, overall weight: 36,000 kg, Year of construction: 2009, Equipment: ABS, STAS/ALU/TIPPER Year of construction: 10/2009 Gsdpfx Ajvdrt Sshveui 2 axles Total weight: 36000 kg Empty weight: 11245 kg ABS

Condition: used, empty load weight: 5,635 kg, overall weight: 36,000 kg, Year of construction: 2015, Equipment: ABS, STAS/ ALU/ PLANE Guedpfxevdrtlj Ahvoi Year of construction: 2015 2 Axles Empty weight: 5635 kg Total weight: 36000 kg ABS EBS

Condition: used, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,310 mm, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Empty weight: 5.590 kg Carrying capacity: 33.410 kg GVW: 39.000 kg Make of bodywork: STAS Guedpfewzkx Tjx Ahvji Tipper: Back

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Guodpfxegcw Rio Ahvei Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi

Condition: used, functionality: fully functional, empty load weight: 7,990 kg, maximum load weight: 28,010 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2023, loading space length: 13,450 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22,5, color: white, Year of construction: 2023, Equipment: ABS, Object number #30572 Cargofloor 10 mm moving wall pneumatic door locking Jost axles disc brakes 2x lift axle tyres 385/65 R 22.5 body inside dimensions: 13,450 x 2,450 x 2,700 mm portal doors rolling tarp platform with ladder Wabco Smart Board with 212,081 km toolbox work lights side underrun protection holder for ladder/broom rear light guards Guodjx Art Sspfx Ahvoi raise/lower function ABS/EBS Jost landing gears Leasing or financing available on request!

Condition: used, axle configuration: 3 axles, first registration: 08/2026, loading space volume: 90 m³, Year of construction: 2026, Equipment: ABS, Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Internal height front (mm) (IHF) 2641 Internal height rear (mm) (IHB) 2778 Loading length (mm) 13513 Chassis neck height (mm) 217 Overall width (mm) 2550 Overall length (mm) 14000 Axles, brakes, and suspension Axles: SAF Brake type: Disc brake Gjdpfx Ajzir Ivshvjui Brake type: SAF - SBS 2220 Offset (ET) 120 Option 1: Axle with lift axle and starting aid Starting aid activation via button in the truck Option 3: Axle with lift axle Brake pad wear indicator ECAS air suspension with raise and lower valve Lowering of air suspension via Smartboard, as well as raise and lower valve Control console, EBS operation on the left side in the direction of travel, behind the axles Standard Smartboard Air and electrical connection console in the center with gantry As a steel gear support winch, type Weweler, with support feet, one-sided operation, and 2 speed levels Position of support handle of the support winch on the outside Tires: 385/65R22.5 Wabco Trailerpulse Tire type: Regional distance TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Lighting: Aspöck Lighting type: ECOLED III 2 LED reversing lights, mounted at the rear in the direction of travel on the left and right on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front in the direction of travel LEDs in the door frame crossmember: 2 x 3 LEDs Splash guard, underrun protection Control console, sliding floor on the left behind the axles Hydraulic coupling, fifth wheel coupling - size 3/4, return line on the right Hydraulic coupling - gender: Female, return line to fifth wheel coupling Hydraulic coupling return line - size 1 - gender: Female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position: Connection option on the front wall (also with connection option on the support legs) Toolbox, direction of travel, air connection on the side of the instrument panel Aluminum access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on the side underrun protection on the left in the direction of travel Distance from the lower edge profile to the upper side wall at the rear: 2649 Profile, front wall: 3 mm - 2 mm Service door on the left in the direction of travel Side wall Profile, side wall: 3 mm - 2 mm Wear plates, rectangular: 1500 x 1000 x 4 mm Sliding floor system, manufacturer: Cargo Floor Operation of floor system: Wireless remote control Cargofloor Control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile: 8 mm ribbed, sliding floor, stainless steel With additional plastic guides under the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for sliding floor system Complete discharge wall: ALU Storage of complete discharge wall: 6 wheels Rear door Rear wall type: Swing doors Rear wall: Aluminum Design of swing door: 1/2 to 1/2 split, with door frame crossmember Opening of the door leaves: The right door leaf opens first Door frame crossmember: In a pivoting design Material of door frame crossmember: Aluminum Locking of rear doors: 1x twist bar / door half Number of door handles - door leaf left: 2 door handles per twist bar Number of door handles - door leaf right: 1 door handle per twist bar Fastening of the open door leaves: Spring holder with plasti

Condition: used, Year of manufacture: 2008 Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4, 4286LG ALMKERK, NL Gujdpfo Akbkmox Ahvei

Condition: new, axle configuration: 3 axles, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, farmSTAR 60.4 cbm Silver gray Chassis material: Aluminum Chassis type: Sliding floor Axle spacing (mm): 1310-1310 Kingpin height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Internal height front (mm) (IHF): 2,300 Internal height rear (mm) (IHB): 2,300 Loading length (mm): 10613 Height of chassis neck (mm): 240 Overall width (mm): 2550 Volume (m³): 60.41 Overall length (mm): 11,420 Disc brake Number of axles with spring brakes: 2 Offset (ET): 120 Option 1: 1st axle with lift axle and starting aid Activation of the starting aid via button in the truck (button mounting is not included in the scope of supply) and by pressing the brake pedal three times Option 3: 3rd axle with lift axle and Optiturn Activation of the additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h ECAS air suspension with raising and lowering valve Lowering of the air suspension via Smartboard, as well as raising and lowering valve Gsdez Shv Iepfx Ahveui Coupling head: Pneumatic, European Palm coupling Control console: EBS operation, on the left-hand side in the direction of travel, behind the axles Standard Smartboard Air and electrical console in the center with gantry Outriggers: Aluminum telescopic supports Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome with STAS logo Manufacturer of lighting: Aspöck Type of lighting: ECOLED III - with STAS logo Rear lights: 2 LED rear lights, mounted at the rear in the direction of travel, left and right on the lamp carrier Position of work lights (operated via switch): 2 LED rear lights at the rear in the direction of travel, left and right, mounted behind the axles Position of work lights (operated via switch): 2 LED rear lights at the front in the direction of travel, left and right, mounted in the area of the outriggers Position of work lights (operated via switch): 1 piece inside on the front wall in the direction of travel, on the left Protection of the lighting unit: One-piece mudguard LEDs in the door closure cross member: 2 x 3-function LED Underbody protection Operation of underbody protection: Fixed underbody protection Splash guards: Black with STAS logo Hydraulics Position of control console: Sliding floor, left, in front of the axles Hydraulic coupling: SKL Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling return: SKL Hydraulic coupling return - Size: 1 Hydraulic coupling return - Gender: Female Hydraulic coupling - Hose: 3,000 mm Hydraulic coupling - Position: Connection possibility on the front wall (also with connection possibility on the outriggers) Hydraulic coupling - Design: Standard design Hydraulic positioning: Pressure return, pressure left, return right (CON) Suspension of the hydraulic hose with springs: Yes Toolbox Air connection in the toolbox Aluminum extension ladder: 2.5 m, extendable - on the right in the direction of travel Profile of the front wall: 3 mm - 2 mm Service door: On the left in the direction of travel - opens outwards (safety aspect) Profile of the side wall: 3 mm - 2 mm Sliding floor system: Manufacturer: Cargo Floor Operation of the floor system: Remote control Sliding floor system: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 11 mm smooth, overlapping End plate: Sliding floor, Aluminum Mounting of the end caps: Welded Oil t

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 45 m³, Year of construction: 2026, Equipment: ABS, Chassis material: Aluminum Fifth wheel coupling, kingpin: National (t) 12 Axle load: National (t) 8 Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1175 Chassis width (mm): 1400 Loading width (mm): 2475 Internal height, front (mm) (IHF): 2165 Internal height, rear (mm) (IHB): 2165 Gedpfx Ahj Agxxyeveui Loading length (mm): 8486 Overall width (mm): 2550 Wheelbase (mm) (WB): 5800 Overall length: 10,300 Axles, brakes, and suspension Axles: JOST Brake type: Disc brake Brake type: JOST - DCA-T7 (Knorr Bremse) Offset (ET): 120 Option: 1st axle with lift axle and starting aid Starting aid activation: Via button in the truck and by pressing the brake pedal three times Brake pad wear indicator: Connected Air suspension: ECAS with lifting and lowering valve European Palm coupling Type: Smartboard Standard Air and electrical console: Centrally mounted on the driver's side As a steel gear support winch, type Weweler, with compensating springs, single-sided operation, and 2 speed stages Tire size: 385/65R22.5 Tire pressure monitoring: Wabco Trailerpulse Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nuts: Open Wheel nut covers: Chrome with STAS Manufacturer: Lighting ECOLED III - with STAS logo Work lights (operated via switch): With Position of work lights (operated via switch): 2 pcs. LED rear work lights (controlled via reverse signal) Operation: Underrun protection - Manually Towing eye: 1 pc. on the left Splash guard: Underrun protection - Black with STAS logo, mounted across the entire width of the underrun protection Cover: Underrun protection - With covers Handle: Underrun protection - Handle Hydraulics Manufacturer: Tipping cylinder - Edbro Type: Tipping cylinder - Hydraulic cylinder with small housing Cylinder tipping angle: Normal ±47° Model: Tipping cylinder - Edbro - CS18 Stroke: Tipping cylinder: 6733 Tipping cylinder max. pressure: 190 Surface treatment of the cylinder stages: Standard surface treatment Hydraulic coupling: Size 1 Hydraulic coupling: Gender - Female Hydraulic coupling: Hose 2,500 mm Suspension of the hydraulic hose with springs: Yes Number of splash guards on the fender: 2 pcs. Type: Splash guard - Fender - Asphalt Toolbox: In front of the axles, plastic Dimensions: Toolbox - Right in front of the axles: 860x520x500 Aluminum extension ladder: 3 m - right Mounting: Extension ladder for rear access - With hooks for hanging Position: Broom and shovel holder - With 3 holders each, mounted on the chassis on the driver's side Plastic shims: With two plastic shims incl. holder Anchoring device: Chassis - Superstructure Inclination: Front wall (°): 20 Inclination: Rear wall (°): 20 Inclination of the lower profile inside (°): 45 Front wall: 4 mm (Aluminum) Profile: Side wall - 3 mm - 2 mm, smooth design inside and outside, double-walled profiles 600 mm wide - 30 mm thick Floor: 8 mm Aluminum - 110 Brinell Position: Rubber pads - Rubber pads attached below the floor crossbeams Rear door Rear wall: Type - Hinged flap Rear wall: Aluminum Type of hinged flap: Straight design with planks Type of hinges: With double door hinge (double-joint hinge) Sliders: Rectangular design, standard Slider position: 1 slider, with operating handle, in the center on the driver's side Fastening of the open door flap: Door latch for hinged flap, positioned on the right on the driver's side Sealing: Rear wall - With rubber sealing completely around (LL sealing) Rotating locks: 4 toggle locks (left, right and 2x bottom) A

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 59 m³, Year of construction: 2026, Equipment: ABS, Aluminum Maximum Kingpin Load (t) 12 Axle Load (t) 8 Axle Track (mm) 1310-1310 Saddle Height (mm) 1150 Chassis Width (mm) 1200 Loading Width (mm) 2475 Technically Permissible Total Weight (due to design) Wheelbase (mm) Sliding Floor Trailer 6250 Internal Height Front (mm) 2,300 Internal Height Rear (mm) 2,300 Loading Length (mm) 10613 Overall Width (mm) 2550 Volume (m³) 60.41 Overall Length (mm) 11,420 Offset (ET) 120 Option 1: Axle with Lifting Axle and Starting Assist Starting Assist Activation: via button in the truck (button mounting not included in the equipment scope) and by pressing the brake pedal three times. Godpfx Ao Agxxvehvoui Option 3: Axle with Lifting Axle and Optiturn Activation of the additional lifting axle: controlled via Wabco Smartboard. Brake pad wear indicator connected. ECAS air suspension with raising and lowering valve. Lowering of air suspension via Smartboard, as well as raising and lowering valve. Pneumatics: European Palm coupling. EBS operation. Smartboard. Air and electrical console in the center with gantry. Outrigger winches: Aluminum drop-side supports. Tires: 385/65R22.5 Tire Pressure Monitoring System: Wabco OptiTire. Rims: Alcoa Dura Bright. TPMS Sensor Type: Rim-mounted sensor. TPMS Sensor Supplier: ZF. Lighting Type: ECOLED III. 2 LED rear lights, at the rear on the left and right sides in the direction of travel. Position: Work lights (operated via switch) 2 LED rear lights at the rear on the left and right sides in the direction of travel. Work lights: 2 LED rear lights at the front on the left and right sides in the direction of travel, in the area of the outrigger winches. Position: Work lights 1 inside on the front wall on the left. Lighting Unit Protection: One-piece splash guard. LEDs in the door seal cross member: 2 x 3 LEDs. Operation: Underrun protection. Hydraulics. Position: Control console on the left side of the sliding floor. Hydraulic Coupling: SKL. Hydraulic Coupling - Size: 1. Hydraulic Coupling - Gender: Female. Hydraulic Coupling Return: SKL. Hydraulic Coupling Return - Size: 1. Hydraulic Coupling Return - Gender: Female. Hydraulic Coupling - Hose: 3,000 mm. Hydraulic Coupling - Position: Connection possibility on the front wall. Hydraulic Coupling. Hydraulic Position: Pressure return, pressure on the left, return on the right. Suspension of the hydraulic hose with springs: Yes. Mudguards. Toolbox on the left: Plastic. Aluminum extension ladder: 2.5 m extendable - on the right. Broom and shovel holder: with 3 holders each, on the left. Front wall inclination (°): 90. Rear wall inclination (°): 90. Material of the approach plate: Aluminum. Distance: Lower edge profile to upper side wall at the rear: 2,308. Profile: Front wall: 3 mm - 2 mm. Service door: On the left in the direction of travel - opens outwards (safety aspect). Profile: Side wall: 3 mm - 2 mm. Sliding Floor System: Manufacturer: Cargo Floor. Operation: Floor system: Radio remote control. Sliding Floor System: CF 500 SL-C - E-CONTROL. Number of floor profiles: 21. Type of floor profile: 11 mm smooth overlapping. End plate: Sliding floor: Aluminum. Mounting of end caps: Welded. Oil temperature sensor for sliding floor system. Residue-free discharge wall. Type of residue-free discharge wall: Aluminum. Residue-free discharge wall: Brushes. Storage of residue-free discharge wall: 6 wheels with bidirectional cleaning. Rear door. Rear wall type: Swing doors. Rear wall: Aluminum. Swing door design: 1/2 to 1/2 split, with door seal cr