Used Indexator Turntable for sale (392)

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Rear pivot supports on chassis frame * Mechanically adjustable warning panels front and rear * Front closed plastic fenders and rear straight galvanized steel splash guards, each with mudflaps Podpfx Ajl Th Adjfnepr * Reflective contour tape on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Tow bar with 40 mm eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), each with simultaneous lashing option * Load securing package including: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform; 5 pairs UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed into outer frame—rated 13.4 t at corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear tapered section) * Extension planks stored in center of load area * Digger stick tray above rear axle to end member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on side of tray) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting hydraulic ramp shift * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, towing bar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * —Permissible total weight technically up to 30,000 kg— * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 18/2026

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS brake system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle load equalizer at the rear * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * VA closed plastic mudguards as well as HA straight galvanized steel skirts with splash protection * Reflective contour tape on the sides and rear * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Four stake pockets on each side (stakes not included), with lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and retractable * Loadable in all directions and integrated into the outer frame: 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear slope) * Widening planks stored under the loading area in a storage compartment * Excavator arm rest across the rear axle up to the rear cross beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to max. 140 l/min), dual-circuit hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loading height when loaded approx. 860 mm +/- 30 mm with leveling unit * Chassis, turntable, folding outriggers, drop-down supports at the rear and drive-on ramps hot-dip galvanized Podsq Dyv Iepfx Afnepr * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Condition: used, maximum load weight: 43,640 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 10/2013, Semi-trailer with air suspension and hydraulic dual-circuit forced steering (turntable steering) Loading platform from 15,475 mm up to 54,575 mm Loading Platform - "Flatbed" design, quadruple extendable, stepped gooseneck - Mechanical landing gear - Front corners at 90°, closed external frame - Integrated steering linkage in the front frame - Turntable-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge - Rear crossmember as sturdy underride protection Chassis - 4-axle chassis with air suspension including lifting and lowering valve - BPW axles with adjustable tapered roller bearings Braking System - Dual-line, full-air, all-wheel brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV (ABS) Loading Platform L x W 15,475 mm x 2,520 mm Extendable: 9,800 mm + 9,700 mm + 9,800 mm + 9,800 mm, total length up to 54,575 mm Psdjyltm Hjpfx Afnepr Loaded loading height: 1,305 mm At a loaded saddle height: 1,300 mm Rear steering radius: 2,350 mm Gooseneck: 25,000 kg Axle loads: 4 x 10,000 kg Steering 1st – 4th axle hydromechanically forced-steered (dual-circuit steering) (turntable steering) Electric power pack with radio remote control

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Stainless steel toolbox, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° bent with hole pattern for securing equipment, lashing force per point 2,000 kg at a distance of 480 mm * Possible installation of 3,000 kg drop lashing brackets at approx. 600 mm interval – includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side for posts, 100 x 50 mm, in the outer frame – posts are not included in delivery * 30 mm phenolic plywood flooring ----Drum Supports: * 3 galvanized drum supports, secured via container locks, with side forklift pockets spaced 800 mm center/center (pocket width 185 mm) * Maximum drum diameter: 2,600 mm, maximum drum width: 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross brace * Max. drum weight per drum stand: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 polyamide centering cones * 4 pcs. 3.2 t lashing eyes on the support arms for customer-provided securing of the drum against rotation and unwinding ----Loading Height: Psdpfxjx Nli No Afnepr * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame and rear underrun protection hot-dip galvanized * Axles painted in black tone ----Info: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Available from week 28 / 2026

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering facility ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General attachments: * Aluminium air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix external frame, 45° angled, perforated for lashing devices, lashing capacity per lashing point 2,000 kg at a distance of 480 mm * Installation of 3,000 kg folding lashing rings at approx. 600 mm spacing possible - each side comes with 12 x 3,000 kg lashing rings supplied * Each side features 5 pockets for pipe stanchions 100 x 50 mm in the outer frame (pipe stanchions not included) * 30 mm phenolic resin-coated plywood floor ----Cable drum supports: * 3 galvanized cable drum supports, secured via container locks with side forklift pockets centre-to-centre 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-brace * Max. drum weight per support: 6,000 kg * Without drive or drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 retaining collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms to secure the drum against unintentional rotation and unwinding (provided by customer) ----Loading height: Psdpfxsx Nlkas Afnopr * approx. 1,040 mm loaded ----Paintwork/finish: * Chassis, turntable, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) Pjdpfx Afev Nulzonspr * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when uncoupling the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Plastic toolbox 450 x 470 mm mounted on the right side * Side net box 1,000 x 500 x 500 mm * Enclosed plastic mudguards front and rear * Enclosed side underrun protection suitable for advertising * Rear underrun protection * Plastic rear impact buffers * Rear hazardous goods sign * 15-pin electrical connector * LED tail lights * Roller bed length approx. 6,830 mm * Pneumatic 4-point clamping lock * Mechanically adjustable end stops (2 positions) front left and right on the running rails * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg * --Technically permissible total weight of 20,000 kg-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air reservoirs, axles, turntable and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) Ppedpfexarl Nsx Afnjr - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydromechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5 3PMSF tyres, load index (146/146 F) * Brand of our choice * TPMS tyre pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load) Psdpsxbmpfefx Afnspr Brake system: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: * Entire steel construction automatically blast cleaned after welding with shot blasting system * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 volt lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2 inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection panel at the front * Electro-hydraulic unit * Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor) * Galvanized folding supports under the rear platform bevel * 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN) * On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container locks in t

Condition: new, overall weight: 55,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Year of construction: 2025, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full specification available on request. LOAD AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Load floor in double-extendable design, length approx. 9,300 mm * A support plate approx. 200 mm wide is permanently welded to the center beam * Pneumatic locking system with conical locking pin and reinforced locking positions, supply lines are protected within the extendable beams and automatically adjust to each load floor length (except for the supply to the first lock) * Technical fifth wheel load: 25,000 kg For tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lowering valve * 275/70 R 22.5 3PMSF twin tires. Brand of our choice * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Psdpexc Axxefx Afnepr * 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connectors on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outwards * At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted in the load floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm. 1x rear of the gooseneck * 2" kingpin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm hardwood floor on gooseneck and load area enclosed in ALU-omega profiles * 10 pairs of recessed lashing rings in the outer frame of the load area, foldable outwards: - one pair in front of the last axle and at the rear cross member of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel * Remote steering (front and rear) operable via cable remote control, with single-track tracking of the axles, without installation in the tractor unit * Steel front wall, approx. 1,800 mm high, certified version according to EN12642:2016 XL * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing legs, wired to the tractor unit connector * 3 transverse stake pocket rails mounted in load floor of load area, for plug-in stakes approx. 100 x 50 mm * 1 additional removable platform, approx. 500 mm wide, for large cross-section sliding tube, with hardwood covering * 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the right in direction of travel * 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel * WADER container pockets in the load area for transport of: 1x 20' container at weight center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a Ppedpfxjyhkque Afner

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop Ppjdpfjpk D Iijx Afnjr ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: Podepk D Awjpfx Afnjpr * Available from week 20/2026

Condition: used, mileage: 56,238 km, power: 206 kW (280.08 HP), first registration: 12/2001, fuel type: diesel, empty load weight: 13,305 kg, maximum load weight: 1,695 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 4,300 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: none, suspension: steel, number of seats: 3, operating hours: 2,167 h, Equipment: ABS, additional headlights, cabin, differential lock, * German vehicle * 1st owner * Original ONLY 56,238 km * Operating hours 2,167 * Condition, see photos * METZ turntable ladder DL 23-12 * Climbing height 30 meters * Rescue cage for 3 people, 270 kg * 4-way hydraulic outriggers * Nominal rescue height 23 meters with a nominal reach of 12 meters * Rotation 360° * Erecting/tilting -12° to +73° * Automatic transmission * Differential lock * ABS * Leaf spring suspension * Rotating beacons * Engine brake * Rear cab wall with window * 3 seats * Wheelbase: 4,300 mm * Gross vehicle weight 15,000 kg * Unladen weight: 13,305 kg * For sales to businesses and exports (non-EU and EU), German merchant regulations apply. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV (German Vehicle Inspection Association), without a new SP (Special Vehicle Inspection Association), and without a new UVV (German Accident Prevention Regulations). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer is not misled about their condition and suitability. Inspections and testing are possible at any time by appointment and are expressly welcome. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Ppodpfjwfp Rvox Afnsr Subject to changes, prior sale, and errors. - .

Condition: used, mileage: 105,953 km, power: 206 kW (280.08 HP), first registration: 11/2003, fuel type: diesel, empty load weight: 14,135 kg, maximum load weight: 1,695 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 4,300 mm, next inspection (TÜV): 01/2026, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 3, operating hours: 1,821 h, Equipment: ABS, additional headlights, cabin, differential lock, * German vehicle * 1st owner * Operating hours: 1,821 * Condition: see photos * METZ turntable ladder DLK 37 PLC III-2 L39 * Rescue height: 39 meters * Rescue cage for 3 persons, 270 kg * 4-way hydraulic outriggers * 360-degree rotation * Elevation/angle adjustment: -12° to +75° * 8-speed manual transmission * Differential lock * ABS * Leaf suspension * Rotating beacons * Engine brake * Cab rear wall with window * 2 seats * Wheelbase: 4,400 mm * Permissible total weight: 15,000 kg * Unladen weight: 14,135 kg * For sales to commercial traders and for export (both non-EU and EU), German commercial law applies. If a new TÜV inspection is required, we would be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV, SP, or UVV certifications. You can find more trucks on our homepage at Ppodpfx Aew Hcvbjfner We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and evaluation of the goods to prevent misconceptions regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. No liability is assumed for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, empty load weight: 5,120 kg, maximum load weight: 18,880 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2009, loading space length: 7,000 mm, loading space width: 2,300 mm, loading space height: 1 mm, suspension: air, tire size: 285/70R19.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, turntable, air suspension, underrun protection, twin tires, stakes. Superstructure: Wooden trailer with 4 pairs of stake holders, 3x 11t axles, 40 mm drawbar eye. 2 additional pairs of stakes available for a surcharge of €2,000.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, interim sale, and errors! Ppjdpfji Rrlzjx Afnjr

Condition: new, maximum load weight: 14,570 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 1,250 mm, Year of construction: 2026, Equipment: ABS, 18 to Roll-Off Trailer, Sled with 19.5" Twin Tires * Sled trailer for transporting roll-off and sliding containers 5000-7000 mm according to DIN 30722 * Axle loads: 20,000 kg (2 x 10,000 kg) * Ride height unladen front approx. 1150 mm, center approx. 1275 mm (main beam upper edge not straight) * Container support height approx. 1185 mm * Coupling height (center) approx. 700 mm unladen * Straps made from ST52-3, web plate from QSTE380, other parts ST37 or QSTE380 * Main beam straps top 120x15 mm, bottom 120x10 mm * Towing eye ø 40 mm * Bogie for air suspension, including 90 mm high ball race * Electrical/brake connection lines routed on the left side of the drawbar * Distance center of towing eye to front edge of headboard approx. 2600 mm * Axles * SAF * Axle 10 t, disc brake, 19.5" twin tires * Operation of the locks on the left side between the axles, without lift/lower device Brake/ABS * EBS brake system with Roll Stability Program Tires * Branded tires 265/70 R 19.5 twin, wheel centering by hub Lighting * Lane lights (LED) * 15-pin plug/socket at the front * 24-volt lighting system with large multifunction tail lights * Side marker lights (LED) with reflectors * Position lights front, bottom, white, 1 each right and left (LED) * Two pairs of special hook locks for roll-off containers (pneumatically controlled), sled mounted on rollers, rear self-centering Ppjdpfowtvkxex Afner * Chock with holder * Safety system for hook locks: can only be opened with the parking brake activated; if the brake is released, the hooks lock automatically * Plastic toolbox approx. 600x400x400 mm * Side underrun protection, closed design * Frame coating/painting * Turntable painted in RAL 9005 * Parts painting – drawbar galvanized, unpainted

Condition: as good as new (ex-display), empty load weight: 10,000 kg, maximum load weight: 30,000 kg, overall weight: 40,000 kg, axle configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2025, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Perm. total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Perm. total weight special equipment: 40,000 kg Payload special equipment: approx. 30,000 kg Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical total weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg each Lashing points in the low-bed outer frame 4 pairs of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the high-bed outer frame 1 pair of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the low-bed outer frame Suspension: Air suspension unit including lifting and lowering acting on the rear axle unit Brake system: Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake including two external test ports for brake/modulator and bellows pressure Electrics: LED lighting with indicator function for side marker lights, multivoltage (12–24V) Turntable: Heavy-duty welded construction with low-maintenance ball-bearing turntable Towing equipment: Cranked drawbar with 50 mm towing eye, low-maintenance silent bushings including height adjustment for drawbar Chassis: Heavy-duty welded construction made of high-tensile fine-grained steel, through-running cross-members for maximum stability Wheel recesses front (approx. 2,500 mm upper length, 410 mm depth) and rear (approx. 1,470 mm upper length, 370 mm depth); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cutouts above the rear wheels with 2,010 mm wheelbase, front corners chamfered, rear with climbing strips on ramp incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) on high-bed outer frame 1 pair of stake pockets (90x50 mm) on low-bed outer frame Floor: 50 mm softwood flooring (painted/impregnated) Ramps: One-piece hot-dip galvanized loading ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, direct-acting upright spring-assist for easiest handling Finish: Chassis frame hot-dip galvanized in immersion bath Support: 2 foldable supports at the rear left and right of the vehicle Equipment: Folding side underrun protection Front semi-circular plastic mudguards; rear straight steel mudguards with anti-spray 2 wheel chocks with holders; contour markings according to ECE regulation R48 Front wheel recess cover: With 3 pairs of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00888 Hardwood covering for front wheel recess cover Ppodpfoiciutex Afnsr Rear wheel recess cover: With 1 pair of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00897 Hardwood covering for rear wheel recess cover 3 pairs of bolted lashing eyes, 6 t 3 m equipment package without incline B=11,200 Folding outriggers with softwood boards 970.04199-36 LED warning package HTD, cranked Aspöck warning boards 4 times, electrics and revolving beacon 1 pair of storage compartments for 3 m wood planks package (2 pieces mounted lengthwise under the loading area in front of the wheel recess) Rubber coat

Condition: new, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross-bracing units * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when brake is uncoupled) * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right side * Container net storage box made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front and rear * Closed side underrun protection (RAL 9010 pure white), suitable as advertising space * Rear underrun protection * Rear plastic impact buffers * Folding "A" warning plate Podsl Tn U Rspfx Afnjpr * Hazardous goods sign with accompanying document pocket and reflective rear parking warning sign * 15-pin power connector * LED lighting system with protective cover * 2 LED reversing lights (activated by reverse gear) * Additional front loading with rear running rail lowering and removable stops * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at the front left and right on the running rails * Roller rail length approx. 6,830 mm * Pneumatic 4-position clamp lock * For transporting external roll containers according to DIN 30722 Part 1—DEKRA load securing certificate available * Loaded floor height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, includes manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Condition: used, empty load weight: 3,700 kg, maximum load weight: 14,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2011, next inspection (TÜV): 08/2023, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, suspension: air, tire size: 385/55R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, MB-axles disc braked, turntable, air-suspended, lifting+lowering, ABS (anti-lock braking system), lashing eyes, U-protection, aluminum side bumpers, pendulum flaps Body: Flatbed trailer with aluminum drop sides Aluminum drop sides, disc brakes! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pedpfx Afsi Rk Hbenjpr - .

Condition: used, empty load weight: 5,160 kg, maximum load weight: 12,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2015, next inspection (TÜV): 04/2023, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 5,020 mm, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 2 axles, SAF axles, turntable, air suspension, lift/lower function, ABS (anti-lock braking system), portal doors, underrun protection, side aluminum side-guard protection, drop sides. Wheelbase: 5020 mm Body: Orten turntable drop-side trailer type Kettliner-Light with cargo securing, 2x 10t SAF axles, disc brakes, chassis frame made of high-grade lightweight steel profiles, floor made of 27mm phenolic plywood panels, front wall made of aluminum profiles, double-wing rear doors in aluminum, GRP (fiberglass) roof skin with galvanized roof frame construction, movable rear cargo securing system allsafe-Jungfalk 'CRS', mounting provision for truck-mounted forklift, unladen loading edge height approx. 1280mm, clear side loading height approx. 2180mm. Matching Scania beverage truck -83082- with identical box dimensions available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Pjdsi Rl Imjpfx Afnepr

Condition: used, empty load weight: 5,160 kg, maximum load weight: 12,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2015, next inspection (TÜV): 05/2023, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, total length: 2,550 mm, total width: 3,680 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 5,020 mm, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, air suspension, lift/lower function, ABS (anti-lock braking system), portal doors, underride protection, side aluminum side impact protection, drop-side walls. Wheelbase: 5020 mm. Body: Orten turntable drop-side trailer type Kettliner-Light with cargo securing, 2x 10t SAF axles, disc brakes, chassis frame made from high-quality lightweight steel profiles, floor made from 27mm phenolic coated plywood, front wall made of aluminum profiles, double-wing rear doors in aluminum, fiberglass roof skin with galvanized roof frame construction, sliding rear cargo securing system allsafe-Jungfalk 'CRS,' mounting device for forklift truck, unladen loading edge height approx. 1280 mm, lateral through-loading height approx. 2180 mm. Matching Scania beverage trucks -85767- with the same box dimensions available at additional cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors reserved! Ppedpfx Asi Rl Iusfnjr

Condition: used, empty load weight: 5,160 kg, maximum load weight: 12,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2015, next inspection (TÜV): 04/2023, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 5,020 mm, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 2 axles, SAF axles, turntable, air suspension, lift and lower function, ABS (Anti-lock Braking System), portal doors, underrun protection, side aluminum side protection, swinging sideboards. Wheelbase: 5020 mm. Body: Orten turntable swinging-wall trailer type Kettliner-Light with load securing, 2x 10t SAF axles, disc brakes, chassis frame made of high-quality lightweight steel profiles, floor made of 27mm phenolic plywood panels, front wall made of aluminum profiles, double-wing rear doors in aluminum, GRP (glass fiber reinforced plastic) roof skin with galvanized roof frame structure, movable rear load securing system allsafe-Jungfalk "CRS", mounting for forklift truck, unladen loading edge height approx. 1280mm, side through-loading height approx. 2180mm. Compatible Scania beverage trucks -85768- with identical box dimensions available for additional charge! ACCESSORY INFORMATION SUBJECT TO CHANGE, errors, and prior sale reserved! Ppedpfxji Rl I Aj Afnsr

Condition: used, empty load weight: 5,160 kg, maximum load weight: 12,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2015, next inspection (TÜV): 03/2023, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, total length: 2,550 mm, total width: 3,680 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 5,020 mm, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable (central axle) trailer, air suspension, raise/lower function, ABS (anti-lock braking system), portal doors, underride protection, side aluminium side guard rails, folding side boards. Wheelbase: 5020 mm. Body: Orten turntable curtain-side trailer Type Kettliner-Light with load securing, 2 x 10t SAF axles, disc brakes, chassis frame made from high-quality lightweight steel profiles, floor made of 27mm screen-printed plywood panels, front wall from aluminium profiles, double-wing rear doors in aluminium, GRP roof skin with galvanized roof frame construction, adjustable rear load securing system allsafe-Jungfalk "CRS", mounting device for forklift, unladen loading edge height approx. 1280mm, side through-loading height approx. 2180mm. Ppodpspitwtefx Afnjr Matching Scania beverage trucks -85765- with identical box dimensions available at additional cost! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale and errors excepted!

Condition: used, empty load weight: 5,160 kg, maximum load weight: 12,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2015, next inspection (TÜV): 03/2023, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 5,020 mm, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable dolly, air suspension, lift and lower function, ABS (anti-lock braking system), portal doors, underrun protection, lateral aluminium side guard, swing drop sides. Wheelbase: 5020 mm. Superstructure: Orten turntable-swing wall trailer, type Kettliner-Light with cargo securing. 2x 10 t SAF axles, disc brakes, chassis frame made of high-quality lightweight steel profiles, 27 mm anti-slip laminated flooring, front wall made of aluminium profiles, double-wing rear doors in aluminium, GRP roof skin with galvanised roof frame construction, movable rear cargo securing system allsafe-Jungfalk "CRS", mounting bracket for truck-mounted forklift, unladen loading edge height approx. 1280 mm, lateral through-loading height approx. 2180 mm. Matching Scania beverage trucks (item no. 85761) with identical box dimensions available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Ppsdpfei Rl Hhjx Afner

Condition: used, empty load weight: 5,100 kg, maximum load weight: 14,900 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 02/1997, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf spring suspension, lashing eyes, mechanical ramps, rear support, side aluminum undercarriage, twin tires. Ppedpsv R Hmajfx Afnor Construction: 2-axle low-loader trailer with mechanical ramps, 2x SAF axles, drum brakes! Loading height approx. 900mm! Ramp length approx. 2650mm! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - .