Used Low-Bed Semi-Trailer for sale (32,711)

Condition: new, empty load weight: 10,300 kg, maximum load weight: 39,200 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface can be raised and lowered hydraulically after the gooseneck Length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8° Cut-outs in the outer frame of the cargo bed for attaching tensioning straps (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: -One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Axles, suspension and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF tires -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes -Galvanized folding supports under the bevel of the cargo bed -A bracket for a rotating beacon at the rear of the trailer -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -One bracket for the warning signs on the gooseneck and on the ramps on the left and right, including socket -Control valves for the ramps fitted on the right-hand side of the trailer -European reflector signs (red/yellow) at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable (length of the body approx. 2,560 mm) -An electric cable winch with radio remote control approx. 5,400 kg lifting force, including 9.5 mm thick wire rope 24 m long with rope guide roller -Screwed 5to ring for reeving the cable winch cable on the neck without deflection pulley -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition -7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) -1 pair of recessed lashing rings along the central beam at the rear of the bevel (LC 10,000 daN) -A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump Ledpou Hp Hrsfx Aazehf -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm -Speed sticker 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 10,900 kg, maximum load weight: 37,100 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,600 mm, loading space width: 2,540 mm, loading space height: 890 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, operation weight: 10,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 6° -Technical fifth wheel load: 18,000 kg -For tractor units: 4 x 2 and 6 x 2 Loading area: -Loading area, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6° -Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg -Grating and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area Ramps: -A pair of two-part AXS steel ramps with a length of approx. 4,675 mm and a width of approx. 900 mm -Grating floor -Hydraulically hinged ramp tips -Ramps can be moved hydraulically by approx. 235 mm outwards and approx. 365 mm inwards -Painted sand coating on the outer frame of the ramp and on the ramp tip -Flashlights on the outside of the ramp tips with switch next to the ramp controls -Ramp secured in driving position using a quick release Lhedouadk Nepfx Aazef Axles, suspension and tires: -BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle with self-steering -1st Axle with traction aid -Operation via the brake pedal in the tractor unit -Technical axle load: 12,000 kg -Air suspension with lifting and lowering valve -235/75 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 -TPMS tire pressure monitoring sensors mounted in all wheels including spare wheels Braking system: -WABCO EBS-E brand braking system in accordance with EU regulations Paintwork: -Semi-trailer MB 7350 Nova gray Accessories included: -Bulkhead made of steel, plug-in, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -JOST module B - static test load = 50,000 kg -Continuous grating with 5 mm sheet metal underlay as additional reinforcement -Painted sand coating -Cutouts in the outer frame of the loading area and the lifting bed for hanging control valves for the hydraulic ramps on the right of the vehicle -2" kingpin -Central lubrication system with 1 pump, brand BEKAMAX -On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized -Electric cable winch, approx. 5,400 kg pulling force, with radio remote control -Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller -WABCO Smart Board System -4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Condition: new, empty load weight: 15,450 kg, maximum load weight: 65,550 kg, overall weight: 80,000 kg, axle configuration: > 3 axles, loading space length: 21,900 mm, loading space width: 2,540 mm, loading space height: 925 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4 Loading area: Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support. Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length. Axles and tires: BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering. 1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Manufacture of our choice Sockets and lighting: 24-volt lighting system Design in accordance with EU regulations ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallization Complete steel construction shot blasted, then hot-finished with ZINACOR 850 Paint: Ljdpforigw Rjx Aazohf 6-K final treatment: Complete steel construction shot blasted after welding 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax Accessories: Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide 2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle 1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2 Removable protection around the central lubrication pump(s) Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member Manual and description One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.

Condition: new, maximum load weight: 38,100 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 13,100 mm, loading space width: 2,480 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5 3PMSF, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading area: 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: JOST seat posts with 2-speed gearbox for 24 t lifting capacity Axles and tires: BPW axles, two axles rigid two axles self-steering, air-sprung, with drum brake, with raise/lower function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 205/65 R17.5 3PMSF Brake system: WABCO brake system in accordance with EU regulations with EBS-E Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component Top coat single color in MB 7350 nova grey No metallic paint finish possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 Yellow-red air couplings on the galvanized connection strip at the front 4 brake shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights Ledpfx Aaetphtmjzjhf Galvanized folding supports under the bevel of the cargo bed A holder for a rotating beacon at the rear of the trailer Height-adjustable tarpaulin body Galvanized bulkhead with a tensioning mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof can be moved forwards on ALU roof rail profiles bolted to the front and rear wall 3 pairs of sliding stanchions in the loading area The body can be hydraulically widened at the rear to the left and right by approx. 750 mm Sliding roof with pivoting portal support Sliding tarpaulin with 700 mm reserve in length, with tension belts at approx. 600 mm intervals Height top edge of body approx. 3,960 mm Driving with the sliding tarpaulin open is not permitted and will damage the tarpaulin Suspension strip for ALU docking lights at the rear of the vehicle A holder for the warning signs including socket on the gooseneck and on the rear panel on the left and right respectively A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load condition Rear body closed with ALU hinged doors A layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping BEKAMAX central lubrication system with NLGI-2 standard grease and removable protection around the pump Speed sticker 80 km/h at the rear and on both sides Load manometer to determine the axle loads including load diagram

Condition: new, empty load weight: 34,500 kg, maximum load weight: 106,700 kg, overall weight: 141,200 kg, axle configuration: > 3 axles, loading space length: 7,150 mm, loading space width: 2,850 mm, loading space height: 580 mm, tire size: 285/70 R19.5, color: grey, operation weight: 34,500 kg, Equipment: ABS, Gooseneck: -Gooseneck hydraulically raises/lowers and can be removed -Length approx. 3,650 mm -Extensive lashing positions -For tractor units: 6 x 4 or 8 x 4 3-axle compact front chassis: -Hook attachments at the front and rear -Chassis length x chassis width approx. 3,560 mm x 2,850 mm -Extensive lashing positions Excavator bridge "BB-A": -Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear -Length x base width approx. 7,150 mm x 2,850 mm -Beam height x beam width approx. 430 mm x 1,350 mm -Loading height 580 mm with ground clearance 150 mm -5 pairs Hanging lashing rings (LC 10,600 daN) -4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-axle rear chassis: -Mechanical bolt-on coupling for attaching a drop-bed at the front, end cross member at the rear -Chassis length x chassis width approx. 6,840 mm x 2,850 mm -Extensive lashing positions Pendulum axle and tires (front and rear chassis): -"PENDULUM AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and cotter pins for securing in the raised position -Final painting of the axles with two coats of 2-component paint, painted in MB 7350 Nova Gray -Technical axle load: 14,640 kg (62) km/h) -Hydraulic axle compensation -Axle tool -Tires 285/70 R19.5 Steering: -Steering can be operated from the front and rear using a cable remote control with push buttons, with axle alignment control -Socket for operating the steering on the gooseneck -Cable remote control with push buttons including axle alignment control Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -Steel bulkhead, approx. 400 mm high -4 wheel chocks with brackets -2 spare wheels 285/70 R19.5 -3.5" kingpin -Gallows with winch for spare wheel on the front of the gooseneck -Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must have a capacity of at least 80 liters. Couplings -White reflective tape in accordance with EU regulations on the sides and extension, red at the rear -Aluminum side walls and rear wall, approximately 400 mm high, anodized, attachable to the gooseneck -Operating lever on the gooseneck protected by a hinged cover -A separate air connection with an air gun on the gooseneck -Bekamax central lubrication system with NLGI-2 grease, 1x on the gooseneck, 1x on the 3-axle chassis, and 1x on the 5-axle chassis -Variomax tool kit -Multi-coupling hydraulic connections in the area of the low-bed hook receptacle Lhjdpjwhywfsfx Aazof -Front chassis with a separate air connection for pneumatic screwdrivers -Screw-in option (ø 40 mm) every approximately 500 mm on the outside of the upper chord of the outer tube of the excavator bridge for screw rings -Foldable extensions with steel mattresses, adjustable in width from approximately 2,850 mm to approx. 3,250 mm -Steel mattresses with rubber flooring, approx. 12 mm thick -Two stainless steel toolboxes (855 x 340 x 390 mm) -Radio remote control for the steering in addition to the cable remote control -Painted sand layer as anti-slip protection -1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Condition: new, empty load weight: 8,490 kg, maximum load weight: 40,510 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,490 kg, Equipment: ABS, Chassis: - Sturdy welded steel frame construction with front frame kick-up and flat loading area with rear bevel approx. 500x100 mm - 200 mm gooseneck with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of rear slope) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame for lashing with tension straps - Reinforced frame design / concentrated load at center of gravity - Provisions for extendable widenings in the loading area - With excavator trough (without cover), approx. 220 mm deep, approx. 600 mm wide, starting approx. after 2nd axle up to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), approx. 400 mm deep, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended rear closing plate - Drop-leg supports at rear Floor: - 35 mm larch wood floor with aluminium omega profiles Axles, Steering, and Tires: - BPW air suspension axles, 10 tons axle load each, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with total lift approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle as lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with offset centered - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-actuated parking brake - Air connection yellow/red Paintwork: - Steel shot blasting, chassis spray-galvanized and primed - Paintwork chassis/wheel hubs/outer frame in DB 7350 Novagrey Accessories: - Removable side boards and rear wall on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in closing plate - 1 plug-in ECE plate at the rear - 11 pairs ZK modules 10t, mounted laterally: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lights each, mounted at the front on landing gear and at rear before closing plate, infinitely extendable up to a loading width of 4,500 mm - 4 plug-in holders for warning signs in stake pockets on the loading area - 6 pairs of lateral stake pockets for insertable stakes 100x50 mm Lhodpfx Aaowu A Slszjf - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on gooseneck from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on loading area from outer frame to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in the loading area with container locks for one 20ft container - Rubber skirt mounted on underrun protection - Preparation (=cable routing for NATO cable and hole pattern for subsequent installation of NATO socket at the front of the closing plate as well as holder on the vehicle) for later mounting of electrohydraulic unit on the right rear in direction of travel for potential operation of drive-on ramps - Mechanical 24t landing gear with single-side operation and load compe

Condition: used, maximum load weight: 75,700 kg, overall weight: 93,200 kg, axle configuration: > 3 axles, first registration: 06/2008, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 885 mm, tire size: 245/70 R17.5, color: beige, Year of construction: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Angled at 10°, front corners at 45° (1,080 mm long, 190 mm high bevel at the gooseneck end) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Clearance radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - 1-piece aluminium sideboards, 400 mm high, closed on 3 sides incl. rear board, stanchions foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Simple telescopic extension, continuous over the running gear - External/internal tube construction with 1,090 mm fixed loading platform at the front - (L x W) 8,700 mm x 2,550 mm, extendable by 6,700 mm to a max. of 15,400 mm - Steel plate flooring - Locking of extension stages by spring-applied cylinder and tapered pin - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stanchion pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steered axles - Axle brand SAF - Track width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel/wood Rear of vehicle: - Design: "Bevelled" (600 mm long, 10° bevel) - 1,000 mm rear overhang from center of last axle - Detachable ramp eye on rear crossmember - Mechanical support for stabilisation during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Lhjdpexp U Tzjfx Aazjf Ramps: - Two-piece access ramps with lengths of 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting device - SuperGrip rubber flooring - Climbing strips on outer side of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to a maximum outer width of 2,790 mm or minimum inner spacing of 480 mm - Integrated mechanical locking system in ramp lift cylinder for ramp safety during transport - Mount for warning beacon Hydraulics: - Hydraulic connection for tractor unit (1 set), connections for tractor, hydraulic pump in tractor unit with max. 60 l/min flow - Hydraulic emergency hand pump - Electro-hydraulic power pack Trailing steering: - Trailing steering bottle for manual steering of trailer axles via cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at the front of the gooseneck, plug-in type, galvanized - Stanchion holder on the gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm - Widening including extension boards, attachable extension at vehicle rear - 1 pair wheel chocks with holder - 1 spare wheel - Central lubrication system with 2 lubrication pumps - Single-color paint finish, RAL-1001 Beige

Condition: new, empty load weight: 9,400 kg, maximum load weight: 39,600 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, operation weight: 9,400 kg, Equipment: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area with rear bevel, approx. 500x100 mm - Neck of the frame is 200 mm with beveled corners at the front - Beveled swan neck end approx. 500 x 100 mm (traction ribs on the outer frame at rear bevel area) - 2 king pin positions with interchangeable 2" king pin - Outer frame closed to the outside as perforated outer frame - Loading area with extendable central beam, extendable by approx. 2,000 mm in 500 mm increments, pneumatically lockable - Frame stepped 80x80 mm before and after the dividing point - Reinforced frame design / point load at the center of gravity in retracted condition - With excavator trough (without cover), approx. 220 mm deep, approx. 600 mm wide, starting approx. after the 2nd axle to end of vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended end plate - Drop-leg rear supporting feet Ramps: - 2 single-section special design aluminum loading ramps with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be locked for transport with lashing straps - Laterally manually adjustable Axles, Steering and Tyres: - BPW air suspension axles, each rated 10 t axle load, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle is a lift axle (wired via EBS), fully automatic actuation with mechanical emergency control via button on the semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, center offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring system Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mech. 24 t landing gears with single-sided operation and compensation Paintwork: - Steel grit cleaning, spray galvanizing of the chassis and priming - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrey - Reflective stripes on sides and rear in yellow Accessories: - Removable side and rear drop sides on the swan neck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks with holder - Long license plate holder in end plate Lhedpfx Aaoxnym Dozef - 1 ECE sign insertable at the rear - 11 pairs of 10 t ZK lashing rings on the sides: - 2x on the swan neck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning signs including 3 position lights each, at the front on the landing gears and at the rear in front of the end plate; infinitely extendable up to a loading width of 4,500 mm - 4 mountings for warning signs insertable into stanchion pockets on the loading area - 6 pairs of stanchion pockets for 100x50 mm plug-in stanchions on the sides - 2 cross rows of stanchion pockets for 100x50 mm stanchions on the swan neck from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 cross rows of stanchion pockets for 100x50 mm stanchions on the loading area from outer frame inwards to main frame (1x before the extension, 1x after the extension, and 1x after the 3rd axle) - 2 pairs of steel plates in the floor for container locks to accommodate 1x 20 ft container - Rubber skirt mounted on underrun protection

Condition: like new (used), Moeslein DTT19 trailer Lhedpfxsxwyy Ne Aazof

Condition: used, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Extendable Low Loader for Railcar Transport Approval Technical Data 1 Speed: 80km/h 65km/h Fifth-Wheel Load: 23,000kg 26,000kg Rear Axle Load: 10,000kg 11,000kg Total Weight: 83,000kg 92,000kg Payload: 52,500kg 61,500kg Unladen Weight (without accessories): 30,500kg Gooseneck: Length: 4,000mm Width: 2,480mm Construction Height: 235mm Fifth-Wheel Height: 1,350mm Front Underride Protection: 1,420mm Rear Underride Protection: 2,700mm King Pin: 3.5 inch Taper: Beveled 10 degrees Front Corners: Beveled 45 degrees Flooring: 50mm spruce Landing Legs: mechanical Width with sideboards: 2,550mm Hydraulic STZ gooseneck with externally mounted beams, hydraulically raisable and lowerable, with mechanical drop-leg supports and hydraulic support cylinders. Hydromechanical forced steering (2-circuit steering system) in low-profile design (construction height 235mm) with adjustable guide elements and THP steering cylinders. Loading Platform: Type: Flatbed Adjustable Height: No Length: 13,000mm Width: 3,000mm Flooring: Steel/spruce 50mm Wheel Wells: No Wide Extensions: No Extendable: Single-stage telescopic First section length: 10,000mm Loading heights (loaded): Loading height 1: 815mm Telescopic loading platform, designed as a combination of outer and inner tube construction, with a fixed 1,070mm long front platform section. Integrated pin-eye coupling in the fixed platform section for connecting vessel bridge extension beams. The welded angle-section rails serve as a running track for rails with gauges of 1,000mm (rail distance 1,015mm) and 1,435mm (rail distance 1,450mm). Locking of the extension stages by spring-loaded cylinders and conical bushings. Platform height on the center tube (outer tube): approx. 815mm (+/- 130mm) Platform height on the embedded rail elements: approx. 790mm (+/- 130mm) Rear Undercarriage: Chassis type: Standard Loaded height: 815mm Width: 3,000mm Wheelbase: 1,360mm Flooring: Steel plate Wide extensions: No Wheel wells: No Excavator trough: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Offset stub axles Axle leveling: hydraulic Axle manufacturer: BPW/Eco Operating modes: 1 Axle lift (1) +/-: 130/130mm Axle lift (2) +/-: 0/0mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift airbag Ljdpfxoyfvype Aazohf Steering: Number of steered axles: 6 Steered axle arrangement: all steered Max. steering angle: 45° Steering type: Hydraulic, 2-circuit system Tyres: Size: 235/75 R 17.5 143/141 J Type: twin wheels Rim type: disc Rim centering: hub-centered Braking system code: According to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes With ABS delete: No Parking brake: Spring-actuated EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis remarks: Steering designed for extended condition with greater steering angle for the front axles Open wheel cutouts above the wheels with narrow transverse beams in between (ALU covers see below accessories) Control elements protected, located on the left in the direction of travel...

Condition: new, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5 3PMSF, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear slope of approx. 1,000 mm x 8° -6 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Axles and tires: -PW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electro-magnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Seat posts: -JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -One bracket for rotating beacon at the rear of the trailer -Mounting in the rear area of the gooseneck for ALU trailer lights -Galvanized folding supports under the bevel of the cargo bed -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall approx. 2,440 x 400 mm on the gooseneck -The rear, galvanized stanchions are removable (length of the body approx. 2,560 mm) -Four warning signs approx. 423 x 423 mm with one position light, extendable by approx. 400 mm -3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container -6 pairs of stanchion pockets 100x50 mm in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -A layer of sand painted onto the chequer plates, above the kingpin and the cargo bed to prevent slipping -On the warning plates a holder for rotating beacon -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame Lhedpouqlmnofx Aazjf -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 12,800 kg, maximum load weight: 36,200 kg, overall weight: 49,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,550 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 12,800 kg, Equipment: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm - Gooseneck hydraulically raised/lowered and removable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading area: - Low bed with external supports, designed as a telescopic tank bridge in a low construction with a front extension - Length 6,850 mm x Width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear chassis: - Rear chassis with closed outer frame with checker plate cover and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, suspension, and tires: - "PENDEL-AXLE", all Hydro-mechanically forced-steered axles - Hose rupture valve on the axle balancing cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pins for securing in the raised position - Final axle painting with two coats of 2-component acrylic paint in a single color "FAY-Gray-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system in accordance with ECE R 14 - TPMS tire pressure monitoring sensors installed in all wheels, including spare tires Accessories included: - Steel bulkhead, plug-in, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches - One spare tire with mounting adapter - Gooseneck outer support with mounting holes for screwable lashing rings -Slidable aluminum side walls on the gooseneck, approx. 400 mm high, anodized -Slidable aluminum rear wall on the gooseneck, approx. 400 mm high, anodized Ljdpfx Aasvy Edcezohf -Checker plate covering above the gooseneck -Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide -Illuminated control panel on the gooseneck with on/off switch -Hydraulic crossbar for supporting the gooseneck on the tractor unit or a dolly -2" kingpin -Anti-slip sticker on the left slope of the gooseneck -Gooseneck closed at the rear upper area with a removable cover -4 chocks with brackets -Hydraulic connections from the gooseneck to the drop bed with multi-coupling instead of screw couplings -1 pair of steel ramps with climbing rails and fastening bolts for bridging the drop bed's hooks -The Ramps can be installed over or between the hooks. -Attachment option for the steel loading ramps at the rear between the outer supports of the gooseneck. -Prepared for screw-on container holders for 1x20f on the outer support. -Mechanical bolt-and-lug coupling from the low bed to the chassis, for replacing the loading area or installing extension supports. -With electro-pneumatic-hydraulic couplings. -The outer supports of the low bed are provided with a painted layer of sand as a slip protection. -Removable loading floor (galvanized) in 3 elements, insertable between the outer supports with hardwood flooring. -Foldable extensions, by approximately 230 mm per side. -Hanging rail at the front of the rear chassis to the low bed for loose loading ramps. -2 pairs of stake pockets recessed into the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm. -Hanging rail for loose Aluminum docking ramps on the vehicle's end crossbar -Central lubrication system with 2 pumps -Wireless and cable remote control -4 warning signs, approximately 423 mm x 423 mm extendable -Extensive lashing positions

Condition: new, empty load weight: 10,600 kg, maximum load weight: 39,400 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5, color: grey, operation weight: 10,600 kg, Equipment: ABS, Gooseneck: -Gooseneck with hardwood covering, 30 mm thick -Gooseneck at the rear, straight design -3 pairs of lashing rings (LC 5,000 daN) Loading area in extendable design: -Loading area in extendable design -5 pairs of lashing rings that can be folded outwards -3 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the front of the loading area -Cutouts in the outer frame of the loading area for hanging tensioning straps -Hardwood covering, approx. 48 mm thick, checkered sheet covering over the axles Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: -BPW axles, two axles rigid, two axles with self-steering -Air suspension, with drum brake, with lifting/lowering- Function -The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually -Axle tool -Tires 205/65 R17.5 Braking system: Lhsdpst Ag Uwofx Aazef -Braking system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -Steel construction made of high-strength fine-grain steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volts, ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets -Connection in accordance with ISO: -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Painting: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and painted in RAL 9010 (pure white) Accessories included: -A spare wheel with holder in front of the bulkhead -2" kingpins -A galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 brake shoes with holder on the bulkhead -Galvanized folding supports under the bevel of the loading area -A bracket for a rotating beacon at the rear of the trailer -Galvanized extensions, extendable by approx. 230 mm on each side -White Reflective tape in accordance with EU regulations on the side, on the extension and at the rear, red -On the gooseneck and on the rear panel on the left and right, a holder for the warning signs including a socket -European reflector signs (red-yellow) on the rear of the trailer -TPMS tire pressure monitoring system in accordance with ECE R 141 -ALU side walls and rear wall can be plugged into the gooseneck, approx. 2,440 x 400 mm -The rear, galvanized plug-in stanchions are removable, length of the structure approx. 2,560 mm -7 pairs of WADER container bags -1x 20ft container in the loading area; 1x 40ft container in the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers -7 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status -Movable mounting rail for aluminum loading ramps at the rear of the vehicle -A painted layer of sand on the checker plates on the gooseneck and on the loading area to prevent slipping -Four warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A holder for a rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -L

Condition: new, empty load weight: 7,900 kg, maximum load weight: 41,600 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, operation weight: 7,900 kg, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface with rear slope of approx. 1,000 mm x 8° -Recess in the chamfer and protruding into the loading surface to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm Cut-outs in the outer frame of the cargo bed for attaching tensioning straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg Lhodpjunrapofx Aazef -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -TPMS tire pressure monitoring system in accordance with ECE R 141 -235/75 R 17.5 tires Paint finish: -Complete steel construction automatically blasted after welding with blast wheel system -second blasting with corundum for optimum adhesion of the coating system -Finishing coat with 2 layers of 2K top coat, single color in RAL MB 7350 nova grey -Rims painted in silver -Rear section metallized and painted in RAL 9010 (pure white) -Sealing of cavities with special wax Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 2x 7-pin & 1x15-pin Accessories included: -Extensive lashing positions -2" kingpin -One galvanized steel end wall approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon at the rear of the trailer -Galvanized extensions, extendable by approx. 230 mm per side -White reflector tape in accordance with EU regulations on the sides and red at the rear -On the gooseneck and on the rear plate on the left and right, one bracket each for the warning signs including socket -ALU drop sides and rear panel can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Sliding attachment strip for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -a layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -Four warning signs that can be extended by approx. 400 mm, approx. 423 x 423 mm with a position light -One bracket for rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -European reflector plates (red/yellow) at the rear of the trailer -Manual and description on USB stick -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: good (used), Year of construction: 1988, Low loader / semi-trailer Van Hool type H0007 year of manufacture 1988 Lhodpfx Asxqw Tmsazsf loading platform length approx. 8.20 m (flat deck) loading platform width approx. 2.5 m Height from ground to loading platform 63 cm

Condition: used, empty load weight: 10,000 kg, maximum load weight: 39,000 kg, overall weight: 49,000 kg, axle configuration: 3 axles, first registration: 10/2025, loading space length: 9,200 mm, loading space width: 2,550 mm, total width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, Equipment: ABS, tail-lift, With every used semi-trailer, you receive a current and complete inspection and functionality report. Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area featuring a rear chamfer approx. 500x100 mm - Neck section 200 mm with chamfered front corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on the outer frame in the rear chamfer area) - Two king pin positions with replaceable 2” king pin - Outer frame fully closed, perforated for lashing - Platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame before and after extension step with 80x80 mm profile - Reinforced frame version, supports point loads in retracted state at center of gravity - With excavator trough (open, without cover), depth approx. 220 mm, width approx. 600 mm, starts after 2nd axle and extends to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 units of special design 2-part loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wood decking - With anti-slip ribs on loading ramps - Lockable in driving position with lashing straps - Operated by control lever mounted at rear right side - Laterally adjustable hydraulically Flooring: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, 10 t axle load each, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - Lifting and lowering device with total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle is a lift axle (wired via EBS), fully automatic actuation, emergency actuation by push button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - Four wheel chocks with holders - Elongated license plate holder integrated into the rear closing panel - 1 ECE plate, plug-in at rear - 11 pairs of ZK modules 10t side fitments: • 2 on the gooseneck • 2 on the loading area before the extension • 7 after extension - Extendable warning signs incl. 3 marker lights each, at the front next to the landing legs and at the rear before the end panel, continuously extendable up to 4,500 mm loading width - 4 sockets in stake pockets on the loading area for positionable warning signs - 6 pairs of side stake pockets for 100x50 mm stakes Ljdoxxl E Hepfx Aazshf - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck, from outer frame to main frame (one before and one after the king pin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on the deck, from outer frame to main frame (one before extension, one after extension, and one behind 3rd axle) - 2 pairs of steel plates on the loading bed for container locks, suitable for carrying 1x 20ft container

Condition: used, empty load weight: 12,450 kg, maximum load weight: 32,550 kg, overall weight: 45,000 kg, first registration: 11/2008, loading space length: 9,730 mm, loading space width: 2,550 mm, suspension: air, color: orange, operation weight: 12,450 kg, Very well-maintained, first-hand Meusburger MTS 3 - 45T Lsdpfx Aewb Sh Asazohf Triple-axle drive-over low-loader trailer with loading ramp Heavy-duty transport Type MTS 3 Gross weight -45,000 kg Payload -32,550 kg Length -13,900 mm Width -2,500 mm Air suspension

Condition: good (used), functionality: fully functional, overall weight: 57,600 kg, axle configuration: 3 axles, loading space length: 7,240 mm, loading space width: 2,750 mm, loading space height: 945 mm, color: blue, Year of construction: 2008, We have two of these lowbed trailers available Manufacturer: Goldhofer Type: STZ-VKL 3-34/80 A Year: 2008 Total weight: 54,000 kg Own weight: 21,000 kg Payload: 33,000 kg Overall train length: 20,000 mm (max. telescoped 24,200 mm) Loading area (LxW): 7,300 mm x 2,750 mm (telescopic up to 4,200 mm) Ledpoxc U Nvsfx Aazehf Tires: 235/75 R 17.5 Extra: Extension beam: 2x 6,000 mm

Condition: good (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 25,500 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, sem bertoja extendable cradle, 3 axles with 2nd and 3rd steering, air suspension, abs, year 1998, 5.30m cradle with additional 3.50m extension, height from ground 45cm, extractable module above the axles, adjustable detachable neck, control wire for steering self-steering axles, good condition, INTERDRIVE SRL-PARMA DEALER Lhodpfx Aaowg E Rbezsf

Condition: used, functionality: fully functional, empty load weight: 13,000 kg, maximum load weight: 37,100 kg, overall weight: 50,100 kg, axle configuration: 3 axles, first registration: 07/1995, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: blue, Year of construction: 1995, Equipment: ABS, de angelis extendable cradle trailer, year 1995, payload up to 37 tons, 3 axles with pneumatic suspension, abs, 2nd and 3rd steering axle, extendable chassis with additional 3.50m central extension, 5.0m closed cradle, height from ground 44cm, removable headroom above axles, manual rear ramps, good condition, INTERDRIVE SRL-PARMA DEALER Lhjdpowa T T Rsfx Aazef

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2019, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 800 mm, suspension: air, tire size: 235.75 r 17.5, color: traffic orange, Year of construction: 2019, Equipment: ABS, Moeslin low-bed semi-trailer with gooseneck, used, with ramps, 3 axles with 3rd steering axle, air suspension, EBS, prepared for removable rear ramps, 120 cm front headboard, 5 ton side RUD collar hooks, twist locks for 20+20, 40 and 45 ft containers, 3 through cross-members for stanchion seats, 2 PVC toolboxes, ground clearance 84 cm, year 2019. Dealer: INTERDRIVE SRL-PARMA. Ljdoxnqvcjpfx Aazohf

Condition: used, empty load weight: 7,440 kg, maximum load weight: 42,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, color: red, trailer brake: trailer braked, Year of construction: 2009, Equipment: ABS, For sale is a robust HRD flatbed trailer, model SPLB 3 S, year 2009, featuring a certified EN 12642-XL front wall and extensive equipment. Second front wall, relocatable / variably mountable Lodpfx Aajx Akvrozehf Stake pockets Container locks (8 pcs.) integrated into the floor – suitable for 20 ft / 40 ft containers Illuminated warning panels for oversize transports (extendable) Tyres with more than 50% tread remaining Side boards partially available (completeness not checked) Wooden plank floor in solid condition, age-appropriate signs of use

Condition: excellent (used), axle configuration: 3 axles, color: blue, Year of construction: 2019, Equipment: ABS, = Additional Options and Equipment = - Lifting axle - Air suspension = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steering Rear axle 2: Twin tires; Steering Rear axle 3: Twin tires; Lifting axle; Steering Technical condition: very good Visual condition: very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOW LOADER 3x SAF hydraulic steering axles Last axle is liftable Remote control Air suspended Tyre size: 245/70/R17.5 Neck length: 308 cm Extendable loading platform Loading platform length: 678 cm + 300 cm extendable (total loading platform length: 978 cm) Width of loading platform: 254 cm Loading deck height: approx. 89 cm Kingpin to rear of low loader: 927 cm Total length: 987 cm 4x hydraulic support legs Lashing eyes/rings Prepared for twistlocks for 20 ft container Follow us on Instagram, Facebook, and TikTok to see videos of our trucks, commercial vehicles, and machines available for sale. Wir sprechen Deutsch Lhjdpfx Aasuxxc Tezef We speak English Hablamos Español

Condition: new, axle configuration: 3 axles, loading space length: 12,500 mm, loading space width: 24,800 mm, total length: 125,000 mm, total width: 24,800 mm, suspension: steel, tire size: 315/80 R 22.52, color: white, Year of construction: 2024, = Additional Options and Equipment = - Leaf spring suspension - Parabolic spring suspension = Notes = The 3-axle flatbed trailer from CIMC is a robust and versatile trailer designed for transporting large, heavy, or irregularly shaped loads. With three axles, this trailer offers excellent stability and load-bearing capacity, essential for transporting construction materials, machinery, containers, and other heavy goods. CIMC is renowned for its innovative designs and reliable products, and the 3-axle flatbed semi-trailer is no exception. Specifications: - Number of axles: 3 axles for added stability and increased payload. - Payload: Up to 60,000 kg for various applications. - Chassis: Manufactured from high-quality steel for maximum strength and durability. - Body: Flatbed floor without raised edges. - Suspension: Mechanical or air-suspension systems for stable driving and improved load distribution. Features and Benefits: High load capacity: - The 3-axle configuration provides excellent weight distribution and increases cargo capacity. - Ideal for heavy and bulky goods such as construction machinery, containers, and industrial equipment. - Durable construction: The chassis is made from high-grade steel, ensuring the trailer withstands tough daily operations. - Advanced welding techniques guarantee a robust and reliable build, significantly extending the trailer’s service life. Applications: The CIMC 3-axle flatbed semi-trailer is ideal for various applications including: - Construction industry: Transporting heavy building materials, machinery, and equipment - Logistics and distribution: Moving containers, pallets, and irregular cargo - Oil and gas industry: Hauling heavy and bulky equipment - Automotive industry: Transporting vehicles and large machinery Dimensions: L. 12,500mm W. 2,480mm H. 1,200mm Weight: 8,400 kg ± 5% This 3-axle flatbed trailer from CIMC provides a robust and adaptable solution for companies requiring a versatile and reliable trailer for transporting heavy and irregular loads. Outstanding stability, durability, and adaptability to specific cargo make this trailer a valuable addition to any fleet. Export only outside the EU. = Further Information = General Information Year of manufacture: 2024 Applications: Agriculture, Forestry, Construction, Fruit Growing, Earthmoving, Land Management, Internal Logistics, Arable Farming, Mining, Recycling, Parking Management, Demolition, Horticulture, Livestock, and Road Construction Axle Configuration Tire size: 315/80 R 22.52 Suspension: Leaf spring suspension Weights Unladen weight: 8,400 kg Payload: 60,000 kg gross vehicle weight (GVW): 68,400 kg Lhjdoyy Sa Aepfx Aazof Functional Body manufacturer: CIMC ZJV9403JP Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none