Open semitrailer with tarp

KRONE 3-Achs-Sattelanhänger, Curtainsider

Condition: used, maximum load weight: 31,760 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2012, next inspection (TÜV): 09/2026, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. BPW axles * Disc brakes * Air suspension * 1 lift axle * 2-inch kingpin * Edscha roof * Sliding curtain * Rear portal doors * Alloy wheels * Pallet storage box for 30 pallets * 1 PVC storage box * Stake pockets * ABS * Rear portal extendable for loading and unloading Nedpfx Asyrwdioazsla * Vehicle inspection: 03/2027

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – forced-steered Vehicle ID No.: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle aggregate load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Unladen fifth wheel height approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t point load over 4 m loading length Nedpfxjxq S H Ij Aazela - Frame height at front approx. 230 mm - 2" interchangeable king pin - Frame for unladen fifth wheel height approx. 1,120 mm – approx. 1,200 mm with air-suspended tractor unit - Outer frame with 4 mm perforated plate, hole center spacing approx. 100 mm, elongated hole 50/30 mm, for lashing of 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, can also be folded outwards - 8 pairs of square tube sockets with plug-in mounting for square tube stanchions 80x80 mm, both sides of outer frame - 6 square tube sockets with plug-in mounts for 80x80 mm square tube stanchions, positioned transversely across the full width, max. pulling force 2,000 daN AXLES - BPW EcoDisc axles with disc brakes Ø430 mm (22.5" disc) - Load capacity 9 t/axle, on-road version - 1st axle fixed - 2nd and 3rd axles fitted with turntable installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-guided axles, for heavy-duty applications - Automatic forced steering, front fifth wheel plate with steering wedge - Power transmitted via two steering rods, rear axles with turntable installation - Central lubrication points for steering at the front fifth wheel plate and rear turntable - Axle lift on 1st axle, lifts and lowers automatically depending on weight, start-up aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensored - RSS/RSP – stability program - Spring-actuated parking brake on 2 axles - Aluminium air tanks - Brake/air connectors with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lift/lower function, total travel approx. 200 mm - Automatic adjustment to programmed driving level above 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for data reading via display (mileage, axle aggregate load, brake diagnostics, etc.) FLOOR - Phenolic plywood floor 27 mm with steel hat profile rails over longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard strip bolted on both sides of outer frame - Aluminium forklift guard strip screwed transversely at rear - Enclosed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / Monochrome painted lid - 8 removable hardwood crossbeams approx. 100/100 mm with steel edging, fixable in plug-in sockets in outer frame Very good condition, German registration documents, immediately available.

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading area: -2 pairs of lashing rings can be folded outwards (LC 5,000 daN) 24 pairs of cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, air-sprung, with disc brakes (430 mm), with lifting/lowering function -385/65 R 22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paint finish: Nledpfx Aajiu Etkozoa -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) -No metallic paint finish possible Steel construction: -steel construction made of high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690Mpa) Electrical system: -Electrical system according to EU regulations -Lighting 24 Volt -ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets -Connection according to ISO. -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes with bracket -2" kingpin -One galvanized steel end wall approx. 1,600 mm high. EN12642-XL -White reflector tape in accordance with EU regulations on the side of the trailer and red at the rear -European reflector plates (red/yellow) at the rear of the trailer -Loading area with approx. 30 mm thick hardwood floor edged in omega profiles -10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Storage for 1,000 mm stanchions, at the rear in the central support -1 Spare wheel holder under the cargo bed on the right in the direction of travel -One mud flap at the rear of the trailer -Manual and description on USB stick -One bracket for a rotating beacon at the rear of the trailer -One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container. Flush with the rear -Speed stickers 80 km/h at the rear and on both sides -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with one LED position light -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed Nodpfx Aougqvfeazsla * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color Nlodpfjv Sw E Asx Aazea * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: new, maximum load weight: 34,600 kg, overall weight: 49,000 kg, axle configuration: 2 axles, Year of construction: 2025, EuroCompact FL 02 Flatbed Double-Telescopic with Pendulum Axles Weights & Speed (80 km/h) - Fifth wheel load: 25,000 kg - Axle load: 2 x 12,000 kg - Gross permissible weight: 49,000 kg - Unladen weight: approx. 14,400 kg - Payload: 34,600 kg Gooseneck - Length x width: 3,700 mm x 2,480 mm - Coupling height (laden): 1,300 mm - Steering angle radius front/rear: 1,350 mm / 2,250 mm - King pin, fifth wheel load: 25,000 kg Flatbed Section – Double-Telescopic - Length x width: 6,620 mm + 5,050 mm + 5,330 mm x 2,550 mm - Extendable to 3,000 mm wide - Telescoping range: 5,050 mm + 5,330 mm, extendable to 17,000 mm bed length - Deck height: 260 mm - Loading height when laden: approx. 360 mm at 100 mm ground clearance Rear 2-Axle Chassis - Wheelbase: 1,360 mm - Single tires: 245/70 R 17.5 - Gigant pendulum axles, 12-14 t axle load - Steering: Forced steering - Excavator recess integrated at rear chassis - Chassis length: 2,700 mm Additional Equipment: - Radio remote control for all functions - Central lubrication system - Electric power unit Nlodpfox Nupxox Aazja - Drive-on ramps - Container locks in the lowbed section - Extensions

Condition: used, first registration: 03/2019, empty load weight: 5,940 kg, overall weight: 39,000 kg, tire size: 385/65 R 22.5, axle configuration: 3 axles, color: red, gearing type: mechanical, suspension: air, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, Equipment: ABS, Wooden floor, disc brakes, BPW axles, EBS, * Demonstration vehicle * Multilock external frame – additional lashing rings (4 x 2 pcs) integrated into the wooden floor in the crane mounting area! Floor with anti-slip coating (TrailerSafetyFloor). Variable front wall heights possible! Several vehicles with identical equipment available – feel free to contact us! Nledex Exgmspfx Aazja

Condition: good (used), functionality: fully functional, machine/vehicle number: WKESD000001092168, empty load weight: 7,080 kg, maximum load weight: 31,920 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,490 mm, loading space volume: 84 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, color: grey, Year of construction: 2022, Equipment: ABS, our vehicle number #30358 3x Krone axles Tire size 385/65 R 22.5 all NEW!!! Perm. total weight 39,000 kg Payload 31,920 kg Empty weight 7,080 kg Body dimensions inside L: 13,620 mm W: 2,480 mm H: 2,490 mm V: 84 m³ Nlsdpfx Aajyt Ilgszoa Loading height at rear portal: 2,400 mm Color Traffic Grey RAL 7043 Lifting axle Disc brakes Sliding curtain Sliding roof Load securing certificate EN 12642 XL Hydraulic rear extension 500 mm each side Multilock outer frame 2 lashing rings in rear cross member 5 pairs of heavy-duty lashing rings under outer frame 10 rows of stanchion pockets 81 x 81 mm 2x oversize warning panels per side Forklift accessible up to 7,000 kg Rear wall 750 mm, foldable Holder chains for rear wall Roll-up tarpaulin at rear Side curtains with 600 mm 'Kasack' (reinforced lower section) Stanchion depot on left Fitting for revolving beacon at rear 2x tool box 6x plug-in stanchions Jost landing gears Raise/lower function ABS EBS E-wheel holder 2x LED side marker lights (RSW) Side underrun protection (UFS) Financing available on request!!!

Condition: used, overall weight: 39,000 kg, maximum load weight: 32,013 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 06/2026, total width: 2,550 mm, total height: 3,283 mm, loading space length: 13,610 mm, loading space width: 2,475 mm, loading space height: 1,960 mm, Equipment: ABS, Pin diameter: 55 mm, mounting width: 225 mm, capacity: approx. 0.16 m³ Nljdpfx Aasx Egbpszoa PA1629 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 37,040 kg, overall weight: 47,500 kg, axle configuration: > 3 axles, first registration: 03/2006, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, Meusburger MPS-4 tarpaulin 4-axle trailer Steering axle last axle Lift axle Tarpaulin can be widened Edscha - Sliding roof Mechanical lifting roof Stroke approx. 300mm Payload: 37,040 kg Tires: 385/65R22.5 Nlodpfou T Ulqjx Aazoa Disc brakes Air suspension Axle 1 Lift axle Axle 4 Friction-steered trailing axle Portal doors Excess width equipment removable at the front with 2 extension plates Overwidth equipment removable at the rear with 2 pull-out plates 12 pairs of heavy-duty lashing rings (foldable) with a tensile force of 5 tons each 12 pairs of mushrooms on the side with outer frame for lashing 16x 3 stake pockets transverse to the direction of travel Both door leaves can be fully folded down with door retainer. One aluminum double-joint hinge per door leaf and two internal recessed handles. recessed handles. Rear portal can be cranked out 900 mm on both sides Upper rear portal crossbar can be swung away Frame reinforcement for point load 33to on 3m Load-bearing outer frame Loading area: 13,620 x 2,480 x 2,750 mm External dimensions: 13,900 x 2,550 x 4,000 mm Interchangeable kingpin