Van

Krone Plateau SDP 27 eLBP4-C

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading area: -2 pairs of lashing rings can be folded outwards (LC 5,000 daN) 24 pairs of cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, air-sprung, with disc brakes (430 mm), with lifting/lowering function -385/65 R 22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) -No metallic paint finish possible Steel construction: -steel construction made of high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690Mpa) Electrical system: -Electrical system according to EU regulations -Lighting 24 Volt -ASPÖCK-NORDIK (ASS3) Iaodpoiu Etkefx Adwjp -ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets -Connection according to ISO. -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes with bracket -2" kingpin -One galvanized steel end wall approx. 1,600 mm high. EN12642-XL -White reflector tape in accordance with EU regulations on the side of the trailer and red at the rear -European reflector plates (red/yellow) at the rear of the trailer -Loading area with approx. 30 mm thick hardwood floor edged in omega profiles -10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Storage for 1,000 mm stanchions, at the rear in the central support -1 Spare wheel holder under the cargo bed on the right in the direction of travel -One mud flap at the rear of the trailer -Manual and description on USB stick -One bracket for a rotating beacon at the rear of the trailer -One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container. Flush with the rear -Speed stickers 80 km/h at the rear and on both sides -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with one LED position light -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – Forced Steering Two identical units available – Volvo FM 370 tractor unit (year 2018) available on request Chassis number: VAVJS1339PH522406 + VAVJS1339PH522408 Mileage: 7,700 km - Weights Gross technical weight: 39 t Axle unit load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width: 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at center over 4 m loading length - Frame height front approx. 230 mm - 2" interchangeable kingpin - Chassis for unladen coupling height approx. 1,120 mm – ca. 1,200 mm with air-suspended tractor - 4 mm outside frame with hole spacing approx. 100 mm, slotted hole 50/30 mm, for lashing points of 3.5 t each - 10 pairs of 5 t lashing rings, recessed and hinged in floor, also foldable outwards - 8 pairs of square tube inserts with plug-in housing for 80x80 mm stakes, both sides of outer frame - 6 square tube inserts with plug-in housing for 80x80 mm stakes, crosswise over full width, max. pull 2,000 daN AXLES - BPW EcoDisc axles with 430 mm disc brakes (22.5" disc) - Load capacity 9 t/axle, on-road specification - 1st axle rigid - 2nd and 3rd axles with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front turntable with steering wedge - Steering transmission via two tie rods, rear axles with bogie - Central lubrication points for steering at the front turntable and rear bogie Iaodjxq S H Iepfx Adwep - Axle lift on 1st axle, raises and lowers automatically depending on weight, lift/lower assistance with speed restriction BRAKE SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-controlled - RSS/RSP stability program - Spring-actuated parking brake on 2 axles - Aluminum air tanks - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lifting/lowering function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for retrieving data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood floor with steel top-hat profile strips above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted to both sides of the outer frame - Aluminum forklift protection strip, rear crosswise - Enclosed, special steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / monochrome painted lid - 8 removable hardwood transverse support beams, approx. 100/100 mm, steel-edged, fixable in plug-in mounts in the outer frame Very good condition, German registration documents, immediately available.

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System Iedpfx Adjugqvfoweap * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length Iasdpfxev Sw E Aj Adwsp * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 10/2015, Visit our website, where you will find our complete vehicle inventory with many more photos and information in multiple languages. SEL 8054 System Trailer PRSSL-24-1-TRI Tail lift / Steering axle German registration / 1st owner First registration: 06.10.2015 Technical gross weight (kg): 40,000 Permitted gross weight (kg): 40,000 Unladen weight (kg): 9,330 VIN: WSJPRS327FTCA5056 Iedpfjxpb E Rox Adwoap TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 BPW axles 3rd TRIDEC steering axle Air suspension Disc brakes BODY: Internal dimensions: Height (m): 2.27 (2.10) Width (m): 2.47 Length (m): 13.65 TAIL LIFT: Dautel Type: DL250010 Year of manufacture: 2015 Max. load (kg): 2,500 VEHICLE DOCUMENTS: Registration certificate part 1 (Schein) Registration certificate part 2 (Brief) M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/українська, Russian/русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot accept liability for any errors or omissions. We kindly ask our customers to consult the available photos. The dimensions specified are approximate values. Our vehicles are sold in their current condition as seen. We invite customers to visit our company to inspect the vehicle's condition in person. We also offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer wishes to purchase new batteries, we are happy to provide price information.

Condition: used, empty load weight: 9,050 kg, maximum load weight: 29,450 kg, overall weight: 38,500 kg, first registration: 10/2006, next inspection (TÜV): 12/2023, suspension: air, tire size: 385/65R22.5, color: grey, gearing type: other, front tire size: 385/65R22.5, rear tire size: 385/65R22.5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Registration service, HU/SP/UVV, transfer to the port Languages: German, Russian, English, Arabic     Basic color: gray Extras in the equipment ABS, compressed air brake, EBS, air suspension, suspension: air, payload (kg): 29450 Body type: hydraulic slant loader, ready for use, HSN/TSN: Iaodpfeww Dqujx Adwsp Video available, own hydraulics 24V (NATO plug) ?si=PIao7Ht7GaZws7-i     Errors excepted.

Condition: new, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specification available upon request. Chassis: * Standard ladder-type frame in lightweight steel construction with through-bolted crossmembers * With pre-cambered chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 Suspension System: * Axle lift mechanism on axle 1 * Fully automatic, load-dependent axle lift control. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h * Brand of choice: Kögel – Three-axle assembly, with 430 mm disc brakes, offset approx. 120 mm. Air suspension with approx. 180 mm travel Vehicle Tyres: * Tyres: six 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L) Chassis Mounted Parts: * Landing gear (brand of choice from Kögel), mechanical with compensating foot, lift capacity approx. 24 t. Single-sided operation, on right in direction of travel * Spray suppression system in accordance with Regulation (EU) No. 109/2011 for tri-axle assemblies with 385/65 R22.5 tyres, consisting of 1 pair of quarter circle mudguards in front of the axles, 1 pair of straight mudguards with spray flaps between 1st and 2nd axle, and 1 pair of quarter circle mudguards with spray flaps behind the axles * 2 wheel chocks with holder * Omission of standard side underrun protection * Storage box for securing: 10 side boards, drop-in stakes, and tailgate or tail door. Fully enclosed, splashwater-protected, simultaneously serving as side guards * Ground clearance (front) approx. 220 mm * 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm. Installed at the rear, 1x left and 1x right * Omission of access ladder * High, fixed rear underrun protection in steel according to ECE-R58 * 1 pair of extendable warning markers each for wide loads, retroreflective red/white, with LED lighting, spiral cable and plug connection. Arranged at the front and rear of the vehicle Brake/Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without wiring), parking brake as spring-actuated brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug * EBS system (brand as per manufacturer's choice) * Air suspension system incl. 1 raise/lower valve, mounted on the left in the direction of travel behind axle assembly. Driving position adjusts automatically * 2 non-interchangeable coupling heads at the front, ISO 1728 * Air reservoir for brake system and air supply made of steel (EN 286-2) Iajdpjyh S I Ejfx Adwjp Floor: * Floorboards approx. 30 mm thick * Floor sealed around the perimeter * Stake pockets for square tube stakes approx. 80 x 80 mm, arrangement per drawing J9: 8 stake pocket strips (18 stake pockets per strip: 4 each external + 10 central per strip) Superstructure: * Meets body stability per EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg Front Wall: * Storage for max. 20 square tube stakes approx. 80 x 80 mm (length approx. 1,990 mm) on inside of front wall * Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, bolted/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall per EN 12640 Rear Wall: * Folding rear wall approx. 600 mm, made of aluminium hollow profiles, with 3 tension rods and T-bolts

Condition: used, empty load weight: 6,850 kg, maximum load weight: 29,150 kg, overall weight: 36,000 kg, first registration: 10/2018, next inspection (TÜV): 06/2026, suspension: other, color: white, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, Sales contacts: Frank Rau / Russian / English / German - Bachar Ibrahim / Arabic / English / German - Registration service, HU/SP/UVV, transfer to port Base color: white Additional features: ABS, ready to drive, price on request (Mobile), disc brake, payload (kg): 29150 Iasdpjycx Tyefx Adwjp Body type: Schmitz SCB*S3T 2018 Edscha, extendable, crank-operated, lift axle, pallet box, HSN/TSN: 1581/AAE Errors excepted.

Condition: used, overall weight: 39,000 kg, maximum load weight: 32,013 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 06/2026, total width: 2,550 mm, total height: 3,283 mm, loading space length: 13,610 mm, loading space width: 2,475 mm, loading space height: 1,960 mm, Equipment: ABS, Pin diameter: 55 mm, mounting width: 225 mm, capacity: approx. 0.16 m³ PA1629 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Isdpfjx Egbpex Adweap Please contact us!

Condition: used, empty load weight: 6,449 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, loading space length: 13,620 mm, loading space width: 2,480 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, mileage: 150,228 km, Equipment: ABS, Unladen weight: 6,449 kg, permissible total weight: 36,000 kg, loading length: 13,620 mm, loading width: 2,480 mm. Tire size: 385/65 R22.5, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, front lift axle, electronic braking system (EBS), toolbox, spare wheel holder (2x), bolted chassis, connection plugs: 1x 15-pin and 2x 7-pin, anti-spray, alloy wheels, telematics system. You can find our entire vehicle inventory on our website. Interested in financing? With our Value Added Service, we offer you customized financing options, full service and telematics solutions. We will be happy to advise you. Iedpfoxz Npuex Adweap