Truck mounted crane

liebherr LTC 1045-3.1

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Cedpfx Aeh Hm Thohyegr -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: Cgedpehlz R Sofx Ahysr -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear bevel of approx. 1,000 mm x 8° -5 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Removable two-part ramps: -A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Seat posts: -JOST fifth wheels (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, two axles rigid two axles self-steering, air-suspended, with drum brake, with lifting/lowering function The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -axle tool -235/75 R 17.5 tires Brake system: -brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Coating: -First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Electrical system: -Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Accessories included: -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -One spare wheel with holder in front of the bulkhead -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon Cgodpfx Aoh Etf Rjhysr -Cover plates to bridge the gap between ramps and cargo bed -White reflector tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for one 20ft, 2x 20ft or one 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Lift axle on the front axle with controls -Square climbing rails 20 x 20 mm -BEKAMAX central lubrication system -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm

Condition: used, mileage: 110,000 km, lifting height: 66,000 mm, Year of construction: 2016, operating hours: 1 h, Drive: Wheel Unladen weight: 51,600 kg Lifting capacity: 70,000 kg Serial number: 060 587 Front tire condition: 80% Cjdpfx Ahjut Dyxjyjgr Rear tire condition: 80% Transport dimensions (L x W x H): 12.5 x 2.55 x 3.9 m Please contact PFEIFER GROUP for further information.

Condition: new, empty load weight: 385 kg, maximum load weight: 365 kg, overall weight: 750 kg, loading space length: 2,510 mm, loading space width: 1,320 mm, loading space height: 1,520 mm, loading space volume: 4.9 m³, color: white, construction height: 2,080 mm, working width: 1,760 mm, Manufacturer: Humbaur Model: Box Trailer Low Loader HK 752513-15P Permissible Gross Weight: 750 kg, unbraked Payload: 365 kg Codohrz Uxspfx Ahyegr Unladen Weight: 385 kg Internal Dimensions: 2510 x 1320 x 1520 mm Tyres: 13-inch Loading Height: 500 mm Rear loading ramp, loadable up to 300 kg Includes 100 km/h road approval V-drawbar, hot-dip galvanized 13-pin plug and reverse light 15 mm thick floor panel Side walls and roof made from 15 mm thick multi-layer wood with UV-resistant plastic coating Interior light installed Galvanized cam lock and hinges 6 lashing rings integrated in the frame, each with a securing force of 400 kg, Dekra certified Jockey wheel Humbaur multifunctional lighting integrated in underrun protection Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following brands in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, price changes and errors excepted. No liability for errors or misprints. Features: torsion axle, independent wheel suspension, box body, jockey wheel, marker lights, galvanized cam lock and hinges, unbraked, includes warranty, V-drawbar hot-dip galvanized, 13-pin plug and reverse light, 15 mm floor panel, sidewalls and roof made of 15 mm multi-layer wood with UV-resistant plastic coating, interior light installed, single-leaf door with cam lock, 6 lashing rings in the frame (400 kg per ring, Dekra certified).

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Cgjdpfx Ahjl Sl Izoyer Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: used, mileage: 67,218 km, power: 270 kW (367.10 HP), fuel type: diesel, color: yellow, Year of construction: 2011, Liebherr LTM 1070-4.2 Year: 2011 Mileage: 67,218 km Operating hours: - Undercarriage: 2,266 - Superstructure: 8,419 Max. permissible weight: 48,000 kg CE compliant machine 12-ton axles Hydraulic suspension Air conditioning Codpfxjx T Alvo Ahyegr Radio remote control Max. lifting capacity at 2.5 m radius: 70 tons Max. lifting height incl. jib: 65 meters Max. outreach with jib: 48 meters Boom length (without jib): 11–50 meters Liebherr D936 LA6 engine 270 kW / 367 HP ZF 12 AS 2302 automatic gearbox Liccon 2 16-meter jib Single hook + 3-sheave hook block Tyres: 385/95R25, 80% remaining ID No.: 559 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations made by Heinhuis, to all contracts concluded by Heinhuis, and to any preceding negotiations. By responding in any way, you accept the applicability of these General Terms and Conditions and confirm that you have taken note of them. Our prices are net export prices. = Further Information = Year of manufacture: 2011 Drive: Wheeled Gross vehicle weight: 48,000 kg CE marking: Yes Price: On request = Company Information = For more information: WhatsApp:

Condition: new, maximum load weight: 65,400 kg, overall weight: 93,400 kg, axle configuration: > 3 axles, Year of construction: 2025, Pos 1. Type STZ-VP 6 (245) (2+4) with pendle axles The specified technical data are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Saddle height (loaded): 1,300 mm Weights Speed: 80 km/h - Fifth wheel load: 22,000 kg - Axle load: 6 x 12,000 kg - Permissible total weight: 94,000 kg - Tare weight approx.: 29,600 kg - Payload approx.: 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions - Dimension b: 18,765 mm - Overall train length: 24,165 mm - Vehicle width: (please specify) - Gooseneck length x width: 3,700 mm x 2,480 mm - Saddle height (loaded): 1,300 mm - Steering lock radius front/rear: 1,370 mm / 2,735 mm - King pin: 3.5'' Front 2-axle chassis - Wheelbase: 1,510 mm Csdewg N N Ispfx Ahyjgr - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered 14,400 mm flatbed (outer beams) single extendable with split - Length x width: 7,000 mm x 2,750 mm - Extendable by / to max.: 3,400 mm / 10,400 mm - Deck height: 300 mm - Plus 4,000 mm extension beam incl. - Loading height, loaded: approx. 450 mm Rear 4-axle chassis - Wheelbase: 3 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering

Condition: used, mileage: 107,755 km, power: 260 kW (353.50 HP), gearing type: automatic, fuel type: diesel, color: yellow, axle configuration: 6x6, first registration: 08/2009, emission class: euro3, Year of construction: 2009, Equipment: ABS, air conditioning, crane, differential lock, onboard computer, traction control, trailer coupling, = Additional options and accessories = - Air seats - Autoradio - Auxiliary lamps - Central lubrication - EBS - Electrically operated mirrors - Fog lights - Halogen headlights - Heater - Mirror heater - Originally painted - Originally varnished - Portable radio set - Powered windows Codpfx Ajxt T Tuehyjgr - Power steering - Reverse camera - Seat heater - Steering wheel adjustment - Tool box - Winch - Windshield heating = More information = GVW: 55.000 kg Selling price: € 149.999, US$ 172.100 Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: excellent (used), functionality: fully functional, mileage: 43,028 km, power: 236 kW (320.87 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 36,000 kg, empty load weight: 36,000 kg, tire size: 445/95 R25, axle configuration: 6x6, number of seats: 1, first registration: 06/2020, DGUV certified until: 06/2025, next inspection (TÜV): 06/2026, emission class: euro5, mast type: telescopic, brakes: telma, suspension: hydraulics, Year of construction: 2020, operating hours: 2,998 h, machine/vehicle number: WLFC30CZ1LEZZ0009, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, differential lock, onboard computer, parking heater, retarder, soot filter, LOCATION: D-73230 KIRCHHEIM UNTER TECK . Liebherr LTC 1050-3.1 - Serial No. 056 808 Lifting capacity: 50 t / 2.5 m (75%) . Telescopic boom: 8.2 - 36 m (Telematik) Swing-away jib: 7.5 m Assembly jib: 1.5 m (incl. hook traverse and roller set) Number of winches: 1 Counterweight: 4.8 t / 1.7 t (6.5 t total) Hook blocks: 3-sheave 32 t double hook, lifting hook 4.8 t Outrigger system: VarioBase (variable outrigger base) Engine: Cummins 6-cylinder / 236 kW / 320 HP / Emission standard Stage V and TIER 4 according to EPA Csdpfxoxtu Nqe Ahysgr Transmission: ZF-TraXon Auxiliary brake: Telma Drive/steering: 6 x 6 x 6 Tyres: 16.00 R25 (445/95 R25) Bridgestone Lower chassis operating hours: 1,485 h Upper structure operating hours: 2,998 h Mileage: 43,028 km Safety system: LICCON 2 . OTHER EQUIPMENT - Air conditioning and auxiliary heater - Upper structure lighting package: 2 x work lights (Xenon) on boom head and 3 x floodlights on superstructure - Height-adjustable crane cabin - Winch monitoring and rear-view camera - 12 V socket in the cab - Working range limiter - Emergency operation for crane hydraulics . Very good condition – German machine from first owner – further details on request – immediately available from stock Kirchheim unter Teck.