Working platform semitrailer

SP32 -G39 MEGA/JUMBO/LIFT/ CONTAINER /FELLECHNER

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 13,620 mm, loading space width: 2,550 mm, loading space height: 890 mm, Year of construction: 2021, Equipment: ABS, running number 12183 JUMBOPLATEAU SEMI MEGA FELLECHNER 3-axle SP32 -G39 JUMBO /SAF / LIFT/ CONTAINER Make/Manufacturer: KÄSSBOHRER First registration: 07/2021 Dimensions: 13620 x 2480 x 890 mm Gross vehicle weight: 36,000 kg Unladen weight: 6,725 kg Fifth wheel load: 12,000 kg Air suspension, raise/lower Drum brakes Spare wheel carrier ABS EBS AGS Axle manufacturer: SAF drum Lifting axle Screen-printed flooring Lashing rings Toolbox Body paint: green Chassis paint: green Tyres: 12 units Tyre condition: 5–10 mm tread Rear axle tyres: 245/70 R17.5, loading platform dimensions: rear 9,300 mm / front 4,400 mm Multilock outer frame 15 + 2 x 7-pin sockets (lighting) Including container locks for BDF or 20-foot container 1 x 20 / 2 x 20 / 1 x 40 foot 40-foot container (empty) including adapter (height) Dimensions: standard 940 mm ASH = 990 mm Iodpfxswyg Nxs Aa Hoar LIFTING AXLE Only 123,000 km All information subject to change; prior sale reserved! If you have any questions regarding this or other vehicles, feel free to call us. If you have any questions for this or another trailer/car, please call us.

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Iajdpfxjg Sk Tvo Aa Her Empty weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height loaded: 950->1,050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Total width: 2,540 mm Technical description Loading area: Loading area in extendable design with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Cut-outs in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N) Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles: SAF axles: SAF axles CD, air-sprung, with disc brakes (377 mm), with lifting/lowering function. (ET 120). The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80kg) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included Yellow-red air couplings on the galvanized front connection panel. 2 pieces of brake shoes with holder. 2" kingpin A galvanized steel bulkhead approx. 2200 mm high. (± 105kg) EN12642-XL Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) on the rear of the trailer. Loading area with approx. 38 mm thick hardwood floor. (± 320kg) 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. (± 30kg) 1 spare wheel holder under the loading area on the right in the direction of travel. Tires 435/50 R 19.5 as selected by the manufacturer. A mud flap ( ) on the rear of the trailer. Manual and description on USB stick. A bracket for a rotating beacon on the rear of the trailer. One bracket for a rotating beacon on the gooseneck and on the rear panel on the left and right the warning signs including a socket. An INOX toolbox across the loading area. (1000x400x2500) (± 135kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' container or 1 x 40' container, an additional locking point is provided in the pull-out for a 45' container. (± 90kg) 4 pairs of WADER container locks. (± 60kg) 10 pairs of galvanized plug-in stanchions approx. 100 x 50 mm, 1,000 mm high. (± 220kg) 3 pairs of stanchion pocket strips, mounted across the loading area, for plug-in stanchion

Condition: new, maximum load weight: 30,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 2,990 mm, total width: 2,550 mm, total height: 1,010 mm, Year of construction: 2025, Equipment: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMITRAILER RH100 – EXTENDABLE – For Building Material and Construction Machinery Transport, NEW VEHICLE GVW (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Kerb weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at kingpin height approx. 980 mm; rear 1,010 mm Extendable lightweight welded steel frame construction Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Reinforced design for building material transport: 20 t/5m at the center of gravity, machinery transport up to 20 t (retracted) Reinforced U-profile outer frame 6 mm Tapered crossmembers 4 mm Rear frame bevel, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame lock on both sides, with Green control lamp = indicator light for pneumatic frame lock at Front left of the trailer Energy drag chain in the central frame Frame lock with integrated grease strip 4 pairs of extendable 8 t lashing rings, rear 9 pairs of extendable 10 t lashing rings in the outer frame profile, foldable outwards on both sides for oversize securing 10 pairs of lashing mushrooms with welded round bar under the outer frame 6 pairs of insert pockets with reinforced brackets for box section stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of the outer frame 3 insert pocket cross-members for box section stanchions 80x80 mm, at central beams Insert pocket cross-members as empty holders for box section stanchions 6 pairs of recessed container locks for: 2 x 20 ft containers 1 x 20 ft container centered 2 x 20 ft containers 1 x 30 ft container Reinforced rear end plate with continuous rail for loading ramps Manual 2 x 12 t landing gear, single side operation + load equalizer 2 drop-down support feet at the rear SAF Intradisc B9 axles with disc brakes ø370 mm (19.5" disc), Load capacity 9 t/axle, on-road design Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm Self-steering SAF trailing axle, approx. 10° steering angle, electrically pneumatic reverse lock activated automatically in reverse, Iaodpowfu N Rjfx Aa Hjr additionally for cab switch with release valve Special axle lift on 1st axle, lifts/lowers automatically depending on weight, with forced lowering, starting aid button in cab / "3 x braking" Odometer 6x tires 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Braking system EU Directive 71/320 ECE R13 2-line air braking system, EBS 2S2M, one axle monitored RSS/RSP stability program Spring-actuated parking brake Steel air tanks Air suspension with lift/lower function, total stroke approx. 200 mm Automatic ride height at 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, service package “BASIC” Axle load display EBS-CAN bus signal Tire pressure monitoring per ECE Directive 141 35 mm wooden floor, laid lengthwise, steel chequer plate covers over wheels Wooden floor impregnated on both sides Reinforced steel front wall approx. 1,800 mm + center posts integrated in front wall 2 lashing eyes in upper corner posts Front steel corner posts integrated in front wall (full side loading length) 24-volt lighting system according to EU Directive 76/756/EEC 2 full LED multi-chamber tail lights “Aspöck” with integrated control unit Flashing LED side marker lights

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable loading area: Loading area with hardwood planks with rear slope of approx. 1,000 mm x 8°    1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm     2 pairs of lashing rings (LC 5,000 daN)    1 pair of lashing rings (LC 10,000 daN)    6 pairs of lashing rings that can be folded outwards (LC 5,000 daN)    2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)    Cut-outs in the outer frame of the loading area for attaching tensioning straps. (LC 2,000 daN)     Braking system:    Braking system in accordance with EU regulations with EBS-E (2S2M) Painting:    First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer     A high-quality 2-component (2K) top coat in a single color in Nova gray Rear section metallized and painted in RAL 9010 (pure white)     No metallic painting possible     Seatposts:     JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load)     Steel construction:     Steel construction made of high-strength fine-grain steels     Steel qualities:     S355J2+N/S355MC (yield point 355MPa)    S690QL/S700MC (yield point 690MPa)    Electrical system:    Electrical system in accordance with EU regulations, lighting 24 volts    Sockets 24N, 24S & 15-pin    Axles and tires:    BPW axles, air-suspended, with disc brakes (377 mm), with lifting/lowering function    The self-steering axles with electromagnetic reversing lock can be activated via reverse gear or manually    Axle tool    Tires 435/50 R 19.5    Accessories included:    Yellow-red air couplings on the galvanized connection strip at the front    4 wheel chocks with brackets    2" kingpins    A galvanized steel bulkhead approx. 1600 mm high. EN12642-XL    White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red    Loading area with strong hardwood floor    9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area    1 spare wheel holder under the loading area on the right in the direction of travel    Ijdpjk Eammefx Aa Hoar Galvanized folding supports under the slope of the loading area    Sliding hanging rails for aluminum loading ramps at the rear of the vehicle    European reflector signs (red-yellow) at the rear of the trailer    A mud flap at the rear of the trailer    A bracket for a rotating beacon at the rear of the trailer    On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs including a socket    A tool box HDPE 620x360x610 under the loading area on the left in the direction of travel    4 pairs of WADER container pockets in the loading area, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition Speed sticker 80 km/h at the rear and on both sides Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light. A holder for a rotating beacon on the warning signs Load gauge for determining the axle loads including load diagram HRM metallization (high resistance metallization) of the outer frame Complete steel construction shot blasted, then the defined visible areas in metallization

Condition: used, maximum load weight: 36,650 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 11/2025, Equipment: ABS, Excerpt of Equipment Loading Platform: Loading platform in extendable design with pneumatically operated locking mechanism. 2 pairs of horizontal lashing rings (LC 5,000 daN). 1 pair of lashing rings in the neck (LC 10,000 daN). 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN). Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Tyres: Tyres 245/70 R 17.5 – brand of our choice. Load index (146/146F). Axles: BPW axles, hydro-mechanically forced-steered. Air suspension with lift and lower valve. Axle tool kit. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa). Coating: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) top coat, single color in RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White). Rims silver. No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connection strip with socket outlets 24N, 24S & 15-pin. Connections compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Warning Boards: On the gooseneck and rear plate, a holder for warning boards each, including socket outlet, left and right. Includes the following additional equipment: - Rear steering controllable from the front and rear via cable remote control with push buttons, including single-track axle monitoring (without installation in the tractor unit) - Electro-hydraulic power pack. (± 45kg) - 4 wheel chocks with holder at the front wall. (± 5kg) - 2-inch kingpin - A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high. (± 35kg) - Yellow-red air couplings on the galvanized connection strip at the front. - Yellow reflective tape according to EU regulations on the side, on the extension and at the rear of the trailer. - European reflector plates (red-yellow) at the rear of the trailer. - A mudflap at the rear of the trailer. - Manual and description on USB stick. - A bracket for a rotating beacon at the rear of the trailer. - Loading area with heavy-duty hardwood floor. - 9 pairs of stake pockets for drop-in stakes approx. 100 x 50 mm located in the outer frame of the loading platform. (± 27kg) - Extensions, galvanized, extendable by approx. 230 mm per side. (± 230kg) - Spiral cable for powering the electro-hydraulic pack and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with socket connection (NATO-NATO) - Galvanized supports under the bevel of the loading area. - On the central beam, a painted sand coating as anti-slip protection. - 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90kg) - 4 pairs of transverse stake pocket strips, mounted acro Iasdpfx Ajx Epznsa Her

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: Iodow Tpqwjpfx Aa Hear - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Iajdowt Iylepfx Aa Hjr Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Iaodpfomtwypex Aa Hjr Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2026, loading space length: 13,590 mm, loading space width: 2,498 mm, loading space height: 3,085 mm, Year of construction: 2014, Equipment: ABS, LECITRAILER LTCC BPW FULL AIR SUSPENSION ----VEHICLE HISTORY 1 OWNER GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----VEHICLE EQUIPMENT----BODY CURTAIN SIDED PLATFORM BODY Ijdpfx Aow Ikdzja Hoar 13.620M OVERALL LENGTH INTERNAL DIMENSIONS 9.623M LENGTH TO ROOF INCREASE 13.59M TOTAL LENGTH 3.085M HEIGHT 2.498M WIDTH CHASSIS AND SUSPENSION FULL AIR SUSPENSION BPW AXLES 3-AXLE TYRES 215/75R17.5 TWIN TYRES ON ALL AXLES ACCESSORIES 2X STORAGE BOXES 1X FIRE EXTINGUISHER BOX ----IMMEDIATELY AVAILABLE! ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 ----EXPORT CLEARANCE (CUSTOMS EXW) IN 10 MINUTES (APPROVED EXPORTER), 5 DAYS, 30 DAY PLATES AND 17–21 DAYS AUSTRIA PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 is required. Changes, errors and prior sale reserved! You can find more vehicles on our homepage: Sale is exclusively subject to our General Terms and Conditions – see homepage. Important Notice – Important Information: Despite careful checking of all details in our offer, errors may occur. In some cases these are caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer within the meaning of §145 BGB. It is merely information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets Ijdpfx Aaetn Hlms Hear * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells * Ramp box Chassis color nova grey For further information please do not hesitate to contact us