Platform trailer

Kel-Berg Heavy-duty / Schwerlastauflieger / sværlast

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: -Steel frame welded construction with front and rear frame offset and low bed without rear bevel -Frame neck + fifth wheel plate 225 mm -Low bed designed for point load 25 tonnes over 5 m -Outer frame closed on the outside with welded-in tie rings for lashing -Replaceable 2" king pin -Rear suspension rail for aluminium ramps Axles and tyres: -BPW low-loader axles, 10 tonnes axle load each, bellows diameter 360 mm -Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) -Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm -S-cam brake 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -IVTM tyre pressure monitoring -9 tyres 235/75 R 17.5, tubeless Iiedpfx Asiu Eu Neh Rec Steering: -1. and 2nd axle hydraulically forced-steered via fifth wheel coupling Floor: -Multi-layer glued plate floor with a thickness of 27 mm flush with the outer frame and longitudinal beams -Reinforced at the bottom with GRP coating -12 pairs of binding rings welded into the outer frame (8 pairs of RUD 8 ton - 6 pairs in the low bed and one pair each on the gooseneck and at the beginning of the rear unit - 2 pairs of 4 ton lashing rings each on the gooseneck and rear unit) -6 pairs of mushrooms in the outer frame in the low bed -Storage compartment with lid in the floor of the low bed at the front left and right Front wall: -25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding tarpaulins: -Sliding tarpaulins on both sides with welded vertical and horizontal straps (distance approx. 600 mm) and tension fasteners made of stainless steel -Adjustable tarpaulin straps (over dead center) up to loading width of 4,000 mm including tarpaulin extension with press studs and Velcro fastener -Tarpaulin extension in direction of travel: 300 mm, height: 750 mm -Incl. Eyelets for loose tarpaulin extension part -1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low bed at the front bend -With belt pockets Rear wall: -Steel rear portal frame with side tarpaulin attachment device -Aluminium double-wing door, 25 mm thick -Both door wings can be fully folded over with door stop -One aluminium double-joint hinge and two recessed grip recesses per door wing Corner pillars at the front: -At roof height, screwed on to the front Central pillars: -3 pairs of continuously adjustable folding pillars -The pillars can be moved along the entire length using a trolley -Central pillars in the low bed can also be fixed in the rear platform Roof: -EDSCHA sliding roof (galvanised) with crossbars that can be moved in both directions (pushed together towards the front in the loading space) -Rear portal crossbeam can be swung away -PVC tarpaulin roof without customs seal -Hand hydraulic lifting roof on both sides, lifting 450 mm -Lifting roof can be moved in the positions at the front (9x50) and rear (9x50) -Including tarpaulin extension and tarpaulin flap at the rear -Canopy at the very front of the bulkhead can be cranked out 900 mm each Accessories: -Extendable warning signs (removable at the front and rear with socket) including position lights up to a loading width of 4,000 mm -Storage of the 4 warning signs on the inside of the front wall, top right and left -1 aluminum ladder with bracket 2,500 mm long on the front wall -2 rows of aluminum slats attached in a self-locking manner -Sheet metal mudguard with mud flaps -1 night parking sign and 1 ADR

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Empty weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height loaded: 950->1,050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Total width: 2,540 mm Technical description Loading area: Loading area in extendable design with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Cut-outs in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N) Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles: SAF axles: SAF axles CD, air-sprung, with disc brakes (377 mm), with lifting/lowering function. (ET 120). The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80kg) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included Yellow-red air couplings on the galvanized front connection panel. 2 pieces of brake shoes with holder. 2" kingpin A galvanized steel bulkhead approx. 2200 mm high. (± 105kg) EN12642-XL Iodpfsg Sk Tvsx Ah Rjic Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) on the rear of the trailer. Loading area with approx. 38 mm thick hardwood floor. (± 320kg) 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. (± 30kg) 1 spare wheel holder under the loading area on the right in the direction of travel. Tires 435/50 R 19.5 as selected by the manufacturer. A mud flap ( ) on the rear of the trailer. Manual and description on USB stick. A bracket for a rotating beacon on the rear of the trailer. One bracket for a rotating beacon on the gooseneck and on the rear panel on the left and right the warning signs including a socket. An INOX toolbox across the loading area. (1000x400x2500) (± 135kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' container or 1 x 40' container, an additional locking point is provided in the pull-out for a 45' container. (± 90kg) 4 pairs of WADER container locks. (± 60kg) 10 pairs of galvanized plug-in stanchions approx. 100 x 50 mm, 1,000 mm high. (± 220kg) 3 pairs of stanchion pocket strips, mounted across the loading area, for plug-in stanchion

Condition: new, maximum load weight: 30,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 2,990 mm, total width: 2,550 mm, total height: 1,010 mm, Year of construction: 2025, Equipment: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMITRAILER RH100 – EXTENDABLE – For Building Material and Construction Machinery Transport, NEW VEHICLE GVW (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Kerb weight approx. 9 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Flatbed width approx. 2,540 mm Loading height front approx. 1,060 mm at kingpin height approx. 980 mm; rear 1,010 mm Extendable lightweight welded steel frame construction Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Reinforced design for building material transport: 20 t/5m at the center of gravity, machinery transport up to 20 t (retracted) Reinforced U-profile outer frame 6 mm Tapered crossmembers 4 mm Rear frame bevel, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame lock on both sides, with Green control lamp = indicator light for pneumatic frame lock at Front left of the trailer Energy drag chain in the central frame Frame lock with integrated grease strip 4 pairs of extendable 8 t lashing rings, rear 9 pairs of extendable 10 t lashing rings in the outer frame profile, foldable outwards on both sides for oversize securing 10 pairs of lashing mushrooms with welded round bar under the outer frame Iisdpfxjwfu N Rs Ah Roc 6 pairs of insert pockets with reinforced brackets for box section stanchions 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of the outer frame 3 insert pocket cross-members for box section stanchions 80x80 mm, at central beams Insert pocket cross-members as empty holders for box section stanchions 6 pairs of recessed container locks for: 2 x 20 ft containers 1 x 20 ft container centered 2 x 20 ft containers 1 x 30 ft container Reinforced rear end plate with continuous rail for loading ramps Manual 2 x 12 t landing gear, single side operation + load equalizer 2 drop-down support feet at the rear SAF Intradisc B9 axles with disc brakes ø370 mm (19.5" disc), Load capacity 9 t/axle, on-road design Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm Self-steering SAF trailing axle, approx. 10° steering angle, electrically pneumatic reverse lock activated automatically in reverse, additionally for cab switch with release valve Special axle lift on 1st axle, lifts/lowers automatically depending on weight, with forced lowering, starting aid button in cab / "3 x braking" Odometer 6x tires 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Braking system EU Directive 71/320 ECE R13 2-line air braking system, EBS 2S2M, one axle monitored RSS/RSP stability program Spring-actuated parking brake Steel air tanks Air suspension with lift/lower function, total stroke approx. 200 mm Automatic ride height at 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, service package “BASIC” Axle load display EBS-CAN bus signal Tire pressure monitoring per ECE Directive 141 35 mm wooden floor, laid lengthwise, steel chequer plate covers over wheels Wooden floor impregnated on both sides Reinforced steel front wall approx. 1,800 mm + center posts integrated in front wall 2 lashing eyes in upper corner posts Front steel corner posts integrated in front wall (full side loading length) 24-volt lighting system according to EU Directive 76/756/EEC 2 full LED multi-chamber tail lights “Aspöck” with integrated control unit Flashing LED side marker lights

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable loading area: Loading area with hardwood planks with rear slope of approx. 1,000 mm x 8°    1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm     2 pairs of lashing rings (LC 5,000 daN)    1 pair of lashing rings (LC 10,000 daN)    6 pairs of lashing rings that can be folded outwards (LC 5,000 daN)    2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)    Cut-outs in the outer frame of the loading area for attaching tensioning straps. (LC 2,000 daN)     Braking system:    Braking system in accordance with EU regulations with EBS-E (2S2M) Painting:    First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer     Iiodpfx Aek Eammoh Rec A high-quality 2-component (2K) top coat in a single color in Nova gray Rear section metallized and painted in RAL 9010 (pure white)     No metallic painting possible     Seatposts:     JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load)     Steel construction:     Steel construction made of high-strength fine-grain steels     Steel qualities:     S355J2+N/S355MC (yield point 355MPa)    S690QL/S700MC (yield point 690MPa)    Electrical system:    Electrical system in accordance with EU regulations, lighting 24 volts    Sockets 24N, 24S & 15-pin    Axles and tires:    BPW axles, air-suspended, with disc brakes (377 mm), with lifting/lowering function    The self-steering axles with electromagnetic reversing lock can be activated via reverse gear or manually    Axle tool    Tires 435/50 R 19.5    Accessories included:    Yellow-red air couplings on the galvanized connection strip at the front    4 wheel chocks with brackets    2" kingpins    A galvanized steel bulkhead approx. 1600 mm high. EN12642-XL    White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red    Loading area with strong hardwood floor    9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area    1 spare wheel holder under the loading area on the right in the direction of travel    Galvanized folding supports under the slope of the loading area    Sliding hanging rails for aluminum loading ramps at the rear of the vehicle    European reflector signs (red-yellow) at the rear of the trailer    A mud flap at the rear of the trailer    A bracket for a rotating beacon at the rear of the trailer    On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs including a socket    A tool box HDPE 620x360x610 under the loading area on the left in the direction of travel    4 pairs of WADER container pockets in the loading area, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition Speed sticker 80 km/h at the rear and on both sides Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light. A holder for a rotating beacon on the warning signs Load gauge for determining the axle loads including load diagram HRM metallization (high resistance metallization) of the outer frame Complete steel construction shot blasted, then the defined visible areas in metallization

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Iiodpfowt Iyljx Ah Rec Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity Iiodpfx Ahomtwypo Rec * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Iisdpfx Ahjrukure Rec Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red Ijdpfx Ahsrukt Ro Roic We are happy to provide you with further information

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFL33802036539537, empty load weight: 6,320 kg, maximum load weight: 31,650 kg, overall weight: 38,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 2,545 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19.5, tire condition: 100 %, color: silver, Year of construction: 2025, operating hours: 10 h, Equipment: ABS, Key features at a glance: - First owner - Mega semi-trailer (low-deck) - Height-adjustable (approx. 980 – 1100 mm) - Can be raised to standard height - Lift axle incl. starting aid - Air suspension - Hot-dip galvanized chassis - 15-year warranty against rust-through - Aluminum loading ramps (load capacity approx. 18 t) - Container locking system for 20’ and 40’ containers - Load-Lock profile - Extensive lashing points (high load capacity) - Rail pockets incl. removable rails - LED lighting - Toolboxes - Tires 435/50 R19.5, as new - Low mileage, 5,300 km - Available immediately - Several identical trailers available The load securing equipment shown in the photos is not included in the offer! A new TÜV inspection can be carried out! Iodpjy Drk Aofx Ah Roic

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells * Ramp box Chassis color nova grey Isdpfx Ahjtn Hlmo Rsic For further information please do not hesitate to contact us