Working platform semitrailer

KÄSSBOHRER Mega Tele HD Plattform Auflieger mit Radmulden

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 Phedpfx Ahotn Hlmozja CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells * Ramp box Chassis color nova grey For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2025, MAX200-N-3A-13.60-19.5-2.54 Technical data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Empty weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height loaded: 950->1,050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Total width: 2,540 mm Technical description Loading area: Loading area in extendable design with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Cut-outs in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N) Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Phsdpfxsg Sk Tvj Ahzea Axles: SAF axles: SAF axles CD, air-sprung, with disc brakes (377 mm), with lifting/lowering function. (ET 120). The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80kg) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included Yellow-red air couplings on the galvanized front connection panel. 2 pieces of brake shoes with holder. 2" kingpin A galvanized steel bulkhead approx. 2200 mm high. (± 105kg) EN12642-XL Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. European reflector signs (red-yellow) on the rear of the trailer. Loading area with approx. 38 mm thick hardwood floor. (± 320kg) 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. (± 30kg) 1 spare wheel holder under the loading area on the right in the direction of travel. Tires 435/50 R 19.5 as selected by the manufacturer. A mud flap ( ) on the rear of the trailer. Manual and description on USB stick. A bracket for a rotating beacon on the rear of the trailer. One bracket for a rotating beacon on the gooseneck and on the rear panel on the left and right the warning signs including a socket. An INOX toolbox across the loading area. (1000x400x2500) (± 135kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' container or 1 x 40' container, an additional locking point is provided in the pull-out for a 45' container. (± 90kg) 4 pairs of WADER container locks. (± 60kg) 10 pairs of galvanized plug-in stanchions approx. 100 x 50 mm, 1,000 mm high. (± 220kg) 3 pairs of stanchion pocket strips, mounted across the loading area, for plug-in stanchion

Condition: used, maximum load weight: 40,800 kg, overall weight: 53,800 kg, axle configuration: > 3 axles, first registration: 11/2012, next inspection (TÜV): 11/2025, Equipment: ABS, Faymonville 4-Axle Multimax STN-4AX Low Loader, extendable First registration: 11/2012 Unladen weight: 13,000 kg Gross weight: 53,800 kg Technically permissible: 55,400 kg Payload: 40,800 kg Kingpin load: 25,000 kg Tyres: 205/65R17.5 3rd and 4th axles with forced steering 4x SAF axles, 7,600 kg each, with air suspension Length: 13,475 mm up to 20,275 mm (extendable) Width: 2,540 mm up to 2,620 mm Height: 1,200 mm Further information available on request by email! Podpsu Aynlefx Ahzeha Information is subject to change/errors excepted! Information provided online is for general description purposes only and does not represent a guaranteed specification. The seller is not liable for errors, input mistakes, or data transmission issues. Subject to modifications. Continuous purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction machinery and heavy-duty vehicles.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,040 mm, Equipment: ABS, NEW VEHICLE Kässbohrer platform extendable MEGA SPA MR3 with wheel recesses Color nova gray Availability: approx. 6 months after receipt of order Pjdpfx Ahegimw Ujzsha # Fifth wheel load 18,000 kg # Fifth wheel height: 950mm # 6,900mm extendable Axles / brake system: # BPW axles with drum brake 17.5" # 3rd as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x Continental HTR 2 245 / 70 / 17.5" on steel rims # Jost support feet 24t # 2 x 7 and 1 x 15-pin electrical connections # 24V lighting system Aspöck # 2 plastic wheel chocks Equipment: # Wheel recesses with hardwood cover # Non-removable Sliding table 300mm long # 1 x 2 aluminum landing ramps 2,400mm long, 600mm wide, capacity 32,000 kg included # 30 mm hardwood floor # Over-width device (4x over-width board galvanized with LEDs + 1x rotating beacon) # Toolbox on the right in the direction of travel # 6x2 holes for container locks for the transport of 1x20", 1x40" or 1x45" containers # 4 container locks twistlocks, removable # Stake holder mounted on the front wall without stanchions # 4 rows of stanchion pockets # 10 x 2 stanchion pockets in the frame # 8 x 2 lashing rings 10t, 5 x 2 lashing rings 8t, 108 lashing points in the outer frame with 2t each, # Storage box for aluminum ramps under the chassis behind the third axle # Front wall 1,500mm+500mm high with Code XL certificate! # Chassis KTL coated and painted MB7350 nova gray # Front wall MB7350 nova gray ----Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, brand-new Wiese Wingliner semi-trailer in OpenTop design Pedpjuqgugofx Ahzsha * SAF axles with air suspension and disc brakes * Tires: 6-ply 385/65 R22.5" * Wabco brake system * LED lighting * Titgemeyer outer frame, with 12 pairs of lashing brackets embedded in the outer frame * 1x spare wheel holder * 2x stainless steel toolbox, approx. 1,000x500x500mm * Wingliner OpenTop body * Side wall on the left and the roof can be opened completely for loading. * Drive via electro-hydraulic unit. * Radio remote control * etc... The vehicle is also available for hire!!! For further information we are at your disposal

Condition: new, maximum load weight: 36,461 kg, overall weight: 49,500 kg, axle configuration: 3 axles, total width: 2,480 mm, total height: 860 mm, Year of construction: 2025, Technical Description Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN). Grating flooring C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles with chequer plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating flooring C40/5 (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections and hydraulic lifting system. Maximum load per pair: 40,000 kg In accordance with regulation 1230/2012/EU, ramps less than 300 mm in length do not count towards the vehicle length of 16,500 mm in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF as per manufacturer’s choice. TPMS: Phedpfx Aow Dl Hwjhzoa TPMS tyre pressure monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display these data. Axles: BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with raise and lower valve. Axle tools included. Brake System: WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Steel frame made of high-strength fine-grain steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Tarp Structure: Tarp structure approx. 3,960 mm – Galvanized front wall with a tensioning mechanism for the sliding curtains. – “EDSCHA” roof, forward-sliding on aluminum roof rail profiles (bolted to front and rear walls). – 3 pairs of movable stanchions on the loading platform. – Body can be hydraulically widened at the rear by approx. 750 mm to the left and right. – Sliding roof with upward-swinging portal carrier. – Sliding tarp with 700 mm length reserve and tensioning straps at approx. 600 mm intervals. Height to top edge of structure approx. 3,960 mm (loaded). – Driving with open sliding roof is not permitted and will cause damage to the tarp. Painting: Entire steel structure is automatically shot-blasted after welding using a blasting wheel system. Second blasting treatment with corundum for optimal coating adhesion. Full metallizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection. Top coat with 2 layers of 2K finish, single-color in a shade of your choice according to the RAL 841GL standard. Rear section metallized and coated in RAL 9010 (pure white). No metallic paint.

Condition: new, maximum load weight: 30,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 2,990 mm, total width: 2,550 mm, total height: 1,010 mm, Year of construction: 2025, Equipment: ABS, WhatsApp SCHWARZMÜLLER 3-AXLE PLATFORM SEMI-TRAILER RH100 - EXTENDABLE - for transporting building materials and construction machinery. NEW VEHICLE Gross weight (technical) 39 t Aggregate load (technical) 27 t Fifth wheel load (technical) 12 t Low weight approx. 9 t (+/- DIN tolerance) Platform length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Platform width approx. 2,540 mm Loading height front approx. 1,060 mm with fifth wheel height approx. 980 mm, rear 1,010 mm Extendable lightweight welded steel frame construction Phodpfx Aewfu N Rehzja Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Reinforced design for transporting building materials 20 t/5 m center of gravity. Transports construction machinery up to 20 t (when collapsed) Reinforced 6 mm U-profile outer frame 4 mm tapered cross members Rear frame slope, approx. 15°, approx. 500 mm Visual indicator for pneumatic load. Frame locking on both sides, with a green indicator lamp = indicator light for pneumatic frame locking on the front left saddle. Electrical chain in the central frame. Frame locking with integrated lubrication strip. 4 pairs of extendable 8 t lashing rings, 9 pairs of 10 t lashing rings at the rear, extendable in the outer frame profile, on both sides of the outer frame, foldable outwards for extra-wide lashing. 10 pairs of lashing pins with welded-in round steel on the bottom of the outer frame. 6 pairs of plug-in housings with reinforcement supports for 80x50x5 mm shaped tubular stanchions (lengthwise, approx. 3 mm clearance). 3 plug-in housing cross members for 80x80 mm shaped tubular stanchions, for center bars. Plug-in housing cross members as empty holders for shaped tubular stanchions. 6 pairs of recessed container locking devices for 2 x 20 ft containers. 1 x 20 ft container in the center. 2 x 20ft Container 1 x 30ft Container Reinforced rear end plate with continuous suspension rail for docking ramps Mechanical 2 x 12 t outriggers, single-sided operation + thrust compensation 2 rear drop-lift support legs SAF Intradisc B9 axles with 370 mm diameter disc brakes (19.5" disc), Load capacity 9 t/axle, on-road version Wheelbase 1,310 + 1,410 mm Wheelbase 7,650 mm Steering knuckle/friction-steered SAF trailing axle, approx. 10° steering angle, electropneumatic reverse lock, automatically engaged in reverse gear, additional for cab switch with release valve Special axle lift on the 1st axle, raises and lowers automatically depending on weight, with forced lowering, traction aid button cab / "3 x brakes" Odometer 6 x 435/50 R 19.5 tires 164J Goodyear Fuelmax T HL (tire load capacity 10 t/axle) 6x steel rims 14.00 x 19.5 Braking system according to EC Directive 71/320 ECE R13 2-wire compressed air braking system EBS system 2S2M, one axle with sensor RSS/RSP - Stability Program Spring-loaded parking brake Steel air reservoir Air suspension with raising and lowering device, total travel approx. 200 mm Automatic ride height 15 km/h Quick-release valves SWIT - Schwarzmüller Intelligent Telematics, "BASIC" performance package Axle load indicator EBS CAN bus signal Tire pressure monitoring according to ECE Directive 141 35 mm wooden floor, longitudinally mounted over the wheels Steel checker plate cover Wooden floor impregnated on both sides Reinforced Sheet steel front wall, approx. 1,800 mm + center supports integrated into the front wall 2 lashing eyes, top corner pillars Steel corner pillars integrated into the front wall, at the front end

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,180 mm, Equipment: ABS, Availability: Approx. 3-4 months after order receipt NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Unladen weight 6,100 kg # Fifth wheel load 15,000 kg # Fifth wheel height: 980 mm # BPW axles with disc brakes # 1st axle as lift axle # Jost support legs 24 t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V Aspöck lighting system # Tires: 6 x 445/45 R19.5 brand-name tires on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width equipment (4 galvanized over-width panels with LEDs + 1 rotating beacon) # Stainless steel toolbox on the right in the direction of travel # 6x2 Jost container locks, retractable # Post holder mounted on the bulkhead + 20 posts (1500 mm) # 4 rows of post pockets # 10 x 2 post pockets in the frame # 7 x 2 4t lashing rings on the platform 108 lashing points in the outer frame, each with a capacity of 2t # Bulkhead with Code XL certification! # Chassis cathodic dip-coated and painted MB 7350 nova gray or RAL 3020 # Bulkhead MB 7350 nova gray or RAL 3020 ----Subject to errors, changes, and prior sale! Psdpfxoivw D Io Ahzjha Location: KTH-Trailer GmbH in Goch

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable loading area: Loading area with hardwood planks with rear slope of approx. 1,000 mm x 8°    1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm     2 pairs of lashing rings (LC 5,000 daN)    1 pair of lashing rings (LC 10,000 daN)    6 pairs of lashing rings that can be folded outwards (LC 5,000 daN)    2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)    Cut-outs in the outer frame of the loading area for attaching tensioning straps. (LC 2,000 daN)     Braking system:    Braking system in accordance with EU regulations with EBS-E (2S2M) Painting:    First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer     A high-quality 2-component (2K) top coat in a single color in Nova gray Rear section metallized and painted in RAL 9010 (pure white)     Phsdjk Eammspfx Ahzea No metallic painting possible     Seatposts:     JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load)     Steel construction:     Steel construction made of high-strength fine-grain steels     Steel qualities:     S355J2+N/S355MC (yield point 355MPa)    S690QL/S700MC (yield point 690MPa)    Electrical system:    Electrical system in accordance with EU regulations, lighting 24 volts    Sockets 24N, 24S & 15-pin    Axles and tires:    BPW axles, air-suspended, with disc brakes (377 mm), with lifting/lowering function    The self-steering axles with electromagnetic reversing lock can be activated via reverse gear or manually    Axle tool    Tires 435/50 R 19.5    Accessories included:    Yellow-red air couplings on the galvanized connection strip at the front    4 wheel chocks with brackets    2" kingpins    A galvanized steel bulkhead approx. 1600 mm high. EN12642-XL    White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red    Loading area with strong hardwood floor    9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area    1 spare wheel holder under the loading area on the right in the direction of travel    Galvanized folding supports under the slope of the loading area    Sliding hanging rails for aluminum loading ramps at the rear of the vehicle    European reflector signs (red-yellow) at the rear of the trailer    A mud flap at the rear of the trailer    A bracket for a rotating beacon at the rear of the trailer    On the gooseneck and on the rear panel on the left and right, a bracket for the warning signs including a socket    A tool box HDPE 620x360x610 under the loading area on the left in the direction of travel    4 pairs of WADER container pockets in the loading area, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading condition Speed sticker 80 km/h at the rear and on both sides Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light. A holder for a rotating beacon on the warning signs Load gauge for determining the axle loads including load diagram HRM metallization (high resistance metallization) of the outer frame Complete steel construction shot blasted, then the defined visible areas in metallization

Condition: excellent (used), mileage: 666,443 km, power: 324 kW (440.52 HP), first registration: 05/2015, fuel type: diesel, fuel: diesel, brakes: retarder, gearing type: mechanical, emission class: euro6, loading space length: 6,130 mm, Year of construction: 2015, operating hours: 3,200 h, Equipment: AdBlue, crane, retarder, = Additional Options and Accessories = - Intarder - Power Take-Off (PTO) = Notes = WMA18XZZ2FP061733 = Further Information = Weights Unladen weight: 17.6 kg Payload: 8,390 kg gross vehicle weight (GVW): 26,000 kg Functionality Boom: Telescopic (6 sections) Boom length: 16 m Lifting capacity: 9,500 kg Superstructure brand: FASSI 455A.2.26 CE marking: yes Condition Technical condition: very good Visual condition: very good Pedpfx Aexvdmkshzeha Further information Please contact Sales for further information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights may be derived from the given information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano (Available on WhatsApp and Viber). MOB: Nederlands (Available on WhatsApp and Viber). When you pay by bank transfer, the money must be transferred to our bank account listed below. Always check the payment details stated on our website. If you have received different information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U