Used Other Three-Way Tipper Trailers for sale (507)

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus delivery/preparation from storage location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Front support leg with gearbox Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter shell fenders 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Note! Sidewall touches the storage box when folded down. Lockable storage compartment for loading ramps underneath the loading area Central axle trailer drawbar arrangement Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, adjustment range max. 300 mm Axles/Suspension GFA drum brake axles "Axle / Chassis laser measured" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" manufacturer's choice Factory silver steel rims Braking System 2-line air brake system Color-coded line routing for easy servicing Manual spindle-operated parking brake ABS and ALB, with ABS plug at front and connection cable Attention: The trailer may only be towed by tow vehicles that ensure the operation of the ABS system! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red lane control lights at rear 2 x 7-pin foolproof plugs at front, with connection cable Hydraulics Three-way tipper, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, retrofit on truck. Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Tipper Body Sturdy tipper body with 4 mm steel floor, steel sidewalls, sides continuous, foldable and hung on pivots with central locking on bottom. Rear corner posts insertable. Rear wall foldable and hung on pivots, with central locking on bottom. Body length approx. 5,000 mm, sidewalls with 6 bottom hinges. Sidewall return springs (not available with split sidewalls) Body width 2,420 mm 5 pairs of lashing rings in floor, each rated to 5 tons Operating Notes The stated gross vehicle weight is technically possible, but depending on the type of load, the total weight may not be achieved when adhering to permitted axle / support / saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with reflective strips according to ECE R 048, white on sides and red at rear Paintwork Ksdpfx Ajy Dzk Eek Dsnc Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Sidewall/body RAL 9005 deep black Optional: Drive-on ramps €1,280.00 / net

Condition: new, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information Kodpfx Aksy Dzlio Denc plus pre-transport / provision ex warehouse location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded structure, continuous tipping shaft at the rear with 80 mm ball bearing Support leg with gear at the front Foldable rear support 2 wheel chocks with holders Steel underride guard Full-width rear mudflaps (not in combination with forklift mounting) Quarter-section mudguards 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable (lock not included) Note! The sideboard touches the storage box when folded down. Lockable compartment for loading ramps under the cargo bed Drawbar system for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles at manufacturer’s choice, with tapered roller bearings and S-cam brakes “Axle/chassis laser alignment” for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" as per manufacturer’s choice Steel rims in factory silver Braking System 2-line compressed air braking system Color-coded lines for easy servicing Hand spindle parking brake 24 Volt ABS and ALB, ABS connector at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure ABS functionality! 2 mistake-proof coupling heads at the front, with connection lines to the truck Electrics 12 to 24 Volts, multi-chamber LED lights, side yellow LED marker lights, license plate lighting in LED (Note! Certain towing vehicles may display diagnostic errors even if functionality is correct) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin mistake-proof plugs at the front, with connection cable 1 additional LED work lamp at rear, activated by reverse light Hydraulics Three-way tipping system, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If required, this must be retrofitted to the truck (trucks with max. hydraulic pumping capacity of 55 l/min) Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Tipper Platform Robust tipper platform with 4 mm steel floor, steel sides, continuous and foldable and swinging sideboards with central locking at the bottom. Removable corner posts at the rear. Drop-down and swinging tailgate, with central locking at the bottom. Platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom. Sideboard retracting springs (not available with foldable front wall) Platform width 2,420 mm 3 pairs of lashing eyes on floor, each rated for 5 t Operating Instructions The specified gross weight is technically possible. Depending on cargo, the gross weight may not be achievable while adhering to permitted axle, support, and kingpin loads. (Poor driving and trailing behavior can result from improper load distribution) Country of Registration / Plates Registered in: Germany With Dekra inspection and certificate (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation "15 years warranty against corrosion through rust" Sideboard/Platform in RAL

Condition: new, empty load weight: 1,000 kg, maximum load weight: 2,500 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,250 mm, loading space width: 1,800 mm, loading space height: 1,150 mm, tire size: 13 Zoll, trailer brake: trailer braked, NEW VEHICLE - Fully equipped - Brenderup TT5325ATB3500HC Loading ramps (2.8t) and rear supports included. 800 mm mesh sides ⚠️ NEW FOR 2025/2026 ⚠️ ► Generation 2.0 with many new features 3500 kg gross vehicle weight 1000 kg unladen weight 2500 kg payload Internal box dimensions: 3250 x 1800 x 1150 mm 2 axles 13 inch tires Heavy-duty jockey wheel Best payload-to-unladen-weight ratio Robust full-steel floor, hot-dip galvanized Aluminum loading ramps 2 heavy-duty rear supports Electric hydraulic pump & manual pump All sidewalls foldable / removable Lockable cable remote control! Robust full-frame chassis, hot-dip galvanized Pendulum tailgate Ksdpfx Aey H Ammjk Denc 8 recessed lashing points with max. 800 daN per point Spiral cable connector with charging line Front charging connection for battery Heavy-duty 3-stage tipping cylinder, super short at the floor! New full LED lighting Aluminum side walls with robust tension latches Plan hooks for safety net or tarpaulins pre-installed Robust steel wheel chocks as standard All the equipment you've always wanted! The new generation of the popular 3-way tippers NEW >> Generation 2.0 (from 10/2025) ❌ What's new? ... ➪ ➪ ➪ ➪✔️ Unique new feature on the market: ✳️ Honeycomb, composite sandwich floor with high-performance plastic sheathing on both sides. Extremely robust and even impact-resistant, this enables an exceptionally low unladen weight and durability for trailers in this class. Insensitive to water and dirt, non-rotting as it is inorganic. ✅ Lower loading height Steel floor: from 74 cm to 66 cm Honeycomb floor: from 74 cm to 69 cm ✅ Protected light bar – newly designed to safeguard lighting and reduce dirt build-up ✅ New and improved sides with recessed locks ✅ New full LED lighting with SIP-K protection rating (waterproof under pressure!) ✅ Rotatable, rubber-dampened, cast iron lashing eyes – each rated to 800 kg ✅ Front box – protects the manual control from dirt and moisture ✅ Improved tipping angle – increased from 45° to 50° for more efficient unloading ✅ Integrated ramp storage – easier access above the light bracket for retrofitting ramps, simplifies loading of machines and vehicles A robust 3-way tipper, perfect for professionals needing high levels of operator-friendliness and multi-functionality. The unique lightweight design offers increased payload. Its high tipping angle makes unloading bulk materials like gravel and soil easier. The TT5000 series is ramp-ready and comes with 8 recessed lashing points, each rated for 800 daN. Machines and equipment necessary for your job can be easily loaded. The drop sides are made from aluminum and are foldable. Trade-in: We are happy to accept your trailer as a trade-in; please contact us or send us pictures and vehicle details: Phone: 05205 9987065 or 0171 6241577 Delivery: If you prefer, your trailer can be delivered after advance payment. Delivery is charged at €1.60 per km (distance from Bielefeld to your location), incl. VAT. We also offer services for: - Service - Workshop - Technical inspections (TÜV) - Tires and wheels - Tarpaulins and frames - Custom fabrications in our metal workshop - Rental Approx. 400 trailers in stock at all times! We look forward to your visit. Office, Workshop, Technical Inspection (TÜV), Spare Parts, Rental and Showroom Senner Hellweg 187

Condition: new, loading space length: 3,610 mm, loading space width: 1,850 mm, loading space height: 1,000 mm, tire size: 195/50R13, Variant steel 3 side tipper 361x185x100cm 3500Kilo Special equipment -35cm drop sides hot-dip galvanized steel Kedpoq Ehtljfx Ak Dsnc -35cm side walls hot-dip galvanized steel Internal dimensions: 361cmx185cmx100cm, 3.500kg tandem 2 axle + parabolic suspension incl. 100 Kmh Including 3mm edged steel floor LED lighting included -Stable support wheel With ramp shafts Total weight (kg):3.500 - braked double axle Operation: electric pump + emergency hand pump Tires: 195/50R13 Accessories: -flat cover -box lock -Higher dropside for an extra charge If you are offered the same trailer at a lower price, please present it to us !!! If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: used, maximum load weight: 2,160 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 06/2011, next inspection (TÜV): 10/2028, loading space length: 3,250 mm, loading space width: 1,800 mm, Year of construction: 2011, INTERNAL VEHICLE NUMBER: M660----BÖCKMANN 3-SIDED DUMP TRAILER 3000 KG----LIKE-NEW 14-INCH SUMMER TIRES----ELECTRIC HYDRAULIC PUMP WITH BATTERY (12 V/95Ah) AND AN EMERGENCY HAND PUMP----TIPPING ANGLE IS 45°----WHEEL CHOCKS----100 KM/H APPROVAL ----REAR SUPPORTS----STEEL SHEET FLOOR----TOTAL WEIGHT: 3000 KG UNLADEN WEIGHT: 840 KG PAYLOAD: 2160 KG ----CARGO AREA: LENGTH: APPROX. 3.25 METERS WIDTH: APPROX. 1.80 METERS HEIGHT: APPROX. 0.50 METERS----PLATFORM BODY BY KAESTEL-ANHÄNGER----* 2 AXLES * 2 X WHEEL CHOCKS * 4 X EYELETS * HANDBRAKE * BRAKES: BRAKED * 14-INCH TIRES ----+++ Exclusive offer from Autohaus Mat GmbH: Up to 1,000 € trade-in bonus? Your advantage for changing vehicles! +++ Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailor-made financing solutions, adapted to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will guide you from the first consultation to the vehicle handover. 4. Our additional services: In addition to purchasing the vehicle, we offer exclusive services for a smooth process: * Worldwide vehicle sales: Support with purchase and export, wherever you are. * Transfer registration: Provision of export or short-term registration plates for transport. * Customs clearance: We take care of all formalities for export abroad. Knedpfxsz Nu Iwj Ak Djc * Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, a net sale for export is generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: * Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp at:

Condition: used, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2026, total length: 7,350 mm, total width: 2,550 mm, total height: 2,300 mm, Year of construction: 2012, Equipment: ABS, * Air suspension * Disc brakes * BPW axles * Support on the drawbar Knjdpezwym Nsfx Ak Doc * 50 mm eye * Spring-assisted side flaps * and more.

Condition: used, maximum load weight: 13,470 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 4,800 mm, loading space width: 2,450 mm, total width: 2,500 mm, Gross weight: 18,000 kg Unladen weight: 4,530 kg Payload: 13,470 kg Overall length: 7,200 mm Loading length: approx. 4,800 mm Width: 2,500 mm Additional information - BPW axles - Tyres 385/65R22.5 Kodpeyw Eqcjfx Ak Denc - Central locking - LED reversing lights - Support leg - Air suspension

Condition: new, maximum load weight: 2,240 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 350 mm, total width: 2,280 mm, total height: 1,240 mm, Year of construction: 2026, * Humbaur HTK 3500.41 Parabolic Suspension * Three-way Tipper Knodpfx Akst Dudis Dec * New vehicle * Year of manufacture: 2025 * Gross vehicle weight: 3500 kg * Unladen weight: 1185 kg * Payload: 2240 kg * Loading height: 760 mm * Overall dimensions: 5712 mm x 2280 mm x 1240 mm * Internal dimensions: 4100 mm x 2100 mm x 350 mm * Drop sides made of anodized aluminum, fully removable * Rear flap can be used as a swinging tailgate * Chassis and tipping bridge hot-dip galvanized * Tipping bridge made of steel * Electric pump combined with emergency hand pump * Multifunctional lighting integrated in underride guard * 8 tie-down rings mounted in the platform floor * Lashing capacity 800 kg per tie-down ring * Pre-installed plank compartment * Automatic jockey wheel * V-drawbar * Plank compartment prepared for easy retrofitting of aluminum ramps * Optional extras: * Headboard rack * Steel mesh extension 620 mm * Aluminum plate extension 620 mm * Additional side wall extension 350 mm * Steel side wall extension 350 mm * Side wall extension 600 mm * Toolbox * Aluminum ramps with 2.8 ton load capacity * Telescopic wind-down supports * Flat cover, color of your choice ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! The specified internal dimensions are approximate values. For new vehicles, additional freight and document costs may apply. The seller is not liable for mistakes, input errors, or data transmission errors. Subject to change and prior sale! TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE DEALS AND ADDITIONAL PAYMENTS POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, next inspection (TÜV): 09/2026, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 600 mm, total width: 2,550 mm, total height: 1,710 mm, Equipment: tail-lift, Humbaur HTK 185524 Tandem Three-Way Tipper Air suspension First registration: 08.01.2019 Valid roadworthiness test: 09/2026 Gross weight: 18,000 kg Unladen weight: 4,660 kg Payload: 13,340 kg Overall dimensions: 7,520 mm x 2,550 mm x 1,820 mm Internal dimensions: 5,500 mm x 2,420 mm x 600 mm Platform KTL coated Side panels and chassis hot-dip galvanized 50 mm drawbar eye Axles with drum brakes Maintenance-free parabolic suspension for optimal load distribution Air brake system with release valve Air brake couplings (red/yellow) Automatic Blockage Prevention (ABS) EBS braking system Quality steel side walls, foldable, removable and swinging at the sides and rear 2 support legs at the rear Central locking Removable front wall Lashing points in platform floor Reinforced 12t gear support winch with load and fast gear Galvanized central tube with stepless crank adjustment Extra-wide single tires for reduced ground pressure LED side marker lights Motor-driven hydraulic three-way tipping system Tyres: 435/50 R19.5 Plank compartment Side panel spring Drive-on ramps available at an extra charge of €1,500 Knodpfx Aksxzx E Ss Djc 19% VAT can be itemized. ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as we also offer this article on other platforms. We strongly recommend a viewing and inspection to avoid any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired!!! Images are similar, may contain optional accessories at extra cost. The stated internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showyard: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 2,000 kg, overall weight: 3,780 kg, axle configuration: 1 axle, loading space length: 3,310 mm, loading space width: 1,860 mm, loading space height: 500 mm, total width: 2,045 mm, total height: 1,430 mm, Equipment: tail-lift, Pronar T654 Single Axle Three-Way Tipper Pronar Three-Way Tipper New vehicle Single axle Rear tipper Side tipper Trailer Transport trailer Permissible total weight: 3,780 kg Unladen weight: 1,280 kg Loading volume: 3.1m³ Internal bed dimensions (L/W/H): 3,310 mm x 1,860 mm x 500 mm Overall dimensions: 4,950 mm x 2,045 mm x 1,430 mm Floor thickness: 3 mm Side wall thickness: 2 mm Platform height: 890 mm Track width: 1,500 mm Suspension: Rigid Support load: 600 kg Tyres: 10.0/75-15.3 Permissible speed: 25 km/h Tipping system: Three-way tipper Kodpfxsxz Nuqe Ak Dsnc Telescope cylinder lift length: 1,300 mm Required oil quantity: 8 L Operating pressure: 160 bar Required tractor power: 26 hp Tipping angle rearwards: 50 degrees Tipping angle sideways: 46 degrees Central locking on three sides Tensioning cords Drawbar with fixed towing eye Ø 40 (top hitch) Foldable support wheel 2-line compressed air brake, drum brake 300 x 60 Crank brake Lighting system 12V Electrical connection at rear Tipper body support (for maintenance only) Chocks with holder Colour: Orange VAT (19%) can be stated separately ATTENTION !!!!! PLEASE READ !!!!! We expressly reserve the right to prior sale, as this item is also advertised on other platforms. We strongly recommend an inspection and evaluation to avoid any misunderstandings about the condition or suitability for the buyer. Inspections and tests are possible at any time by appointment and are expressly encouraged!!! Images may be similar and might show optional extra-cost equipment. The specified internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE AND PAYMENT OF DIFFERENCE POSSIBLE!!! Show yard: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, functionality: fully functional, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 301 mm, loading space width: 185 mm, loading space height: 30 mm, tire size: 185/60 R12C, Henra Three-Way Tipper KP273018 – 2.7 t – Electrohydraulic – ALU side panels – Ready for immediate use This high-quality Henra KP273018 three-way tipper is a robust, fully galvanized professional trailer featuring electrohydraulics, aluminum drop sides, and a galvanized steel floor – ideal for trades, landscaping, construction companies, and agriculture. The price includes a close-mesh load securing net to reliably protect your cargo. Technical Data: Model: Henra KP273018 Type: Three-way tipper, electrically tiltable Gross vehicle weight: 2,700 kg Internal cargo bed dimensions (L×W×H): 301 × 185 × 30 cm Chassis: Tandem axle, 2×1350 kg Tyres: 185/60 R12C Tipping mechanism: Electrohydraulic with battery Side panels: Aluminum, 30 cm high, foldable on all three sides Floor: Galvanized steel sheet + 18 mm wooden panel Front wall with sturdy H-frame 20° tipping angle on all sides Approval documents (ABE) included Features & Benefits: ✔ Electrohydraulic tipping function – conveniently operated at the push of a button, no manual pumping required ✔ Three-way tipping – maximum flexibility on construction sites ✔ Fully galvanized chassis – durable and corrosion-resistant ✔ Fold-down aluminum side panels – fast loading and unloading ✔ Sturdy frame & robust build – for daily professional use ✔ Close-mesh load securing net included – ideal for loose material ✔ 100 km/h version available ✔ Mesh extension, 60 cm high (hinged on three sides) Applications: Construction and trade businesses Landscaping and gardening Agriculture and forestry Facility management, haulage companies Municipal and commercial use Price: €6,200 net (plus VAT) Location: 58640 Iserlohn Knedpfxex An Eke Ak Djc Financing or leasing available Nationwide delivery possible Vehicle registration documents can be sent in advance by arrangement senecar – Your Henra dealer for southern Westphalia, Sauerland and eastern Ruhr area! This offer is subject to prior sale and errors excepted. Only the agreements in the order confirmation or purchase contract are binding. The exact scope of equipment and sale price will be provided by our sales staff.

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring accumulators ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange coupling: * Drawbar with 40 mm screwed coupling (height adjustable mm) ----Electrical system / Lighting: * 15-pole power connector * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system Knjdpfju I Iqfex Ak Dsc ----General components: * Front support winch * Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights * Closed fenders made of sheet steel with splash protection * Closed side impact protection, usable as an advertising surface * Plastic toolbox with bottom insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable reel superstructure, width between the reel arms 1,700 mm, with a tensioning mechanism to secure the reel at the ends of the support arms and a locking mechanism for the cable reel superstructure to the chassis via a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and sliding rubber-coated drive rollers * Hydraulic speed control and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering, and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Pump unit, hydraulically driven with Loncin gasoline engine, including manual and electric starter * Fuel tank and manual starter * 13 hp with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paint finish: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 49/2026

Condition: used, maximum load weight: 13,770 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2020, next inspection (TÜV): 09/2027, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 900 mm, total length: 7,205 mm, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, Tandem 3-way tipper ABS Aluminum sideboards, foldable Rear underrun protection, foldable Platform at the front of the headboard Knodpoz I Hvcjfx Ak Doc Air suspension GVWR 18,000 kg Curb weight 13,070 kg Tires 385/65R22.5, 50-60% tread Vehicle No. 2493. For inquiries regarding the trailer: in very good overall condition, first owner. No liability for typographical and data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers, and semi-trailers manufactured from 2000-2026.

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus pre-carriage / provision from storage location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Support leg with gear at the front Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mudflaps Quarter-shell fenders Knodpfey Dzlcjx Ak Doc 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Sidewall touches the toolbox when folded down. Lockable storage space for loading ramps beneath the loading area WITHOUT ramps Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Chassis/undercarriage laser-aligned" to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tyres 235 / 75 R 17.5" manufacturer’s choice Steel rims, factory silver Brake System 2-line air brake system Color-coded line routing for easy service Hand spindle parking brake Integral air tank ABS and ALB, with ABS connector at the front and connection cable Caution: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 non-interchangeable coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lighting, side yellow LED marker lights 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, needs to be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipping Platform Robust tipping platform with 4 mm steel floor, steel sidewall construction, continuous, fold-down sidewalls Non-swing mounted without central locking underneath. Plug-in corner posts at the rear. Rear wall fold-down and swing-mounted, central locking underneath. Platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom Sidewall retracting springs (not possible with split sidewalls) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated to 5 tons Operating Notes The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while observing permissible axle/support/kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution) Approval/Country Country of registration: Germany with Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation "15-year guarantee against rust-through" Sidewalls/platform RAL 5002 ultramarine blue Note! Platform inside is only primed unless otherwise painted bridge design! Optional loading ramps €1,280.00 net

Condition: used, maximum load weight: 13,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2009, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 1,000 mm, loading space volume: 11 m³, Equipment: ABS, * Foldable underrun protection * Drum brake * ABS * Air suspension * EBS * Support legs Knedpezu Uu Nefx Ak Dec * BPW axles All information without guarantee / subject to change.

Condition: used, empty load weight: 4,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2013, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 3,400 mm, color: grey, Equipment: ABS, Disc brake EBS (Electronic Braking System) Payload 13,650 kg Aluminum sideboards, swinging and foldable Knodj Abxvzepfx Ak Doc with lifting springs on the sides Lashing eyes BPW axles Rolltarp Platform Errors and omissions excepted

Condition: used, maximum load weight: 7,460 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/2008, next inspection (TÜV): 07/2026, loading space length: 4,500 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, total width: 2,550 mm, Gross weight: 10,500 kg Unladen weight: 3,040 kg Payload: 7,460 kg Overall length: 6,480 mm Load length: 4,500 mm Width: total width 2,550 mm / platform width 2,450 mm Loading height: approx. 1,000 mm Further information Knsdjxnhm Eepfx Ak Dec - Height-adjustable drawbar - 500 mm foldable side walls - GFA axles

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WHD115024P1154257, empty load weight: 3,270 kg, maximum load weight: 8,630 kg, overall weight: 11,900 kg, axle configuration: 2 axles, permissible axle load (axle 1): 5,450 kg, permissible axle load (axle 2): 5,450 kg, first registration: 02/2024, next inspection (TÜV): 08/2027, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space volume: 6 m³, suspension: steel, tire size: 235/75 R 17.5, tire condition: 80 %, color: white, trailer brake: trailer braked, Equipment: ABS, our vehicle number: #31070 Humbaur HTK 115024 3-way tipper Ramp access Drum brakes Tires: 235/75 R 17.5 SMB axles Adjustable drawbar 40 mm tow hitch 5 pairs of lashing eyes ABS EBS Toolbox Loading height approx. 990 mm Kjdpoz Eql Aefx Ak Dsnc Body dimensions (internal LxWxH): 5,030 x 2,420 x 500 mm Leaf spring suspension BPW front support Financing also available upon request.

Condition: new, empty load weight: 1,056 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 400 mm, tire size: 185/70R13C SAVERO Stollenreifen, load capacity: 2,444 kg, Hapert Cobalt Plus 3-sided tipper 330x180x110, 3500 kg, LED *AVAILABLE IMMEDIATELY This tipper is up to pretty much any job in the tough construction industry. - 40 side panels in double-walled aluminum, black -70 mm silver drop sides with pendulum action - Heavy-duty aluminum ramps (2500 kg) in ramp shafts - Heavy-duty support wheel S - SAVERO studded tires 185/70R13C for tough off-road use - Parabolic spring chassis with leaf springs on independent wheel suspension - Sturdy shock absorbers and 100 km/h approval Knsdpfx Aorft Ehok Dec - Heavy-duty gear supports at the rear with crank on crank bracket - Galvanized STAHLBODEN - Lamp guards on the rear lights - Remote control for the hydraulic pump - Additional emergency hand pump - Plug socket for shore power supply - Powerful 95 AH supply battery - Galvanized chassis, extremely sturdy construction Technical data - Gross vehicle weight: 3500 kg - Unladen weight: 1056 kg - Payload: 2444 kg - Loading dimensions: 335x180x40 cm - Loading sill height: 73 cm - Tipping angle: 55° - Side tipping angle: 45 - Tires: 185/70R13C SAVERO studded tires - 6 lashing points (1000 kg) - 12 recesses for screw-on lashing hooks Price incl. 19% VAT If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: used, maximum load weight: 13,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2015, next inspection (TÜV): 09/2026, Year of construction: 2015, Equipment: ABS, In good condition! Technical inspection (TÜV) can be renewed upon request for an additional charge. Knjdpfx Aozxvkajk Dsc Tel. WhatsApp

Condition: used, maximum load weight: 10,220 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 10/1999, loading space length: 4,850 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, total length: 7,020 mm, total width: 2,550 mm, More information: Knedpoz I H Tuofx Ak Dec - BPW axles - 700mm side walls - Height-adjustable support leg at the front

Condition: new, maximum load weight: 5,600 kg, overall weight: 7,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, loading space height: 400 mm, total width: 2,200 mm, total height: 1,400 mm, Year of construction: 2026, * Humbaur HTK 754020 * Three-way tipper trailer * New vehicle * Tandem axle * Year of manufacture: 2025 * Gross vehicle weight: 7,500 kg * Unladen weight: 1,900 kg * Payload: 5,600 kg * Overall dimensions: 6040 mm x 2200 mm x 1400 mm * Internal dimensions: 4000 mm x 2030 mm x 400 mm * Loading height: 920 mm * Steel side and rear walls fold-down and removable * Rear wall pendular with central locking * Height-adjustable drawbar approx. 590 mm - 930 mm * Torsion bar axles and parabolic suspension * Integrated slot for loading ramps Knedpfx Aottfm Hjk Djc * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made from 4 mm steel sheet * 3 pairs of recessed lashing points * Air brake system with ALB / ABS ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend an inspection and assessment to avoid misunderstandings regarding condition and suitability for the buyer. Inspections and assessments are possible at any time by appointment and are expressly encouraged!!! Images for illustration only; may include accessories subject to additional charges. The above-stated internal dimensions are approximate. For new vehicles, additional costs for freight and documentation may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND TOP-UP PAYMENTS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 2,160 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,700 mm, loading space width: 1,500 mm, loading space height: 300 mm, Humbaur Tipper Trailer HUK 272715 with Electric Pump Permissible total weight: 2,700 kg Knsdpfx Aox T Sffsk Dec Internal dimensions of the box: 270x150x30 cm (LxWxH) Features: * Electrically tippable with emergency hand pump * Chassis and tipper bridge welded and hot-dip galvanized * Galvanized steel floor, 2 mm * Aluminum side panels, 300 mm, foldable and removable all around * Tapered corner posts * Automatic jockey wheel * Lighting protected within the undercarriage guard * 3-stage telescopic cylinder * Tires 195/50 R13C * Loading height 670 mm * Braked with reversing automatic * 13-pole connector with reversing light * Maintenance-free rubber suspension axles with independent wheel suspension Optional accessories (surcharge applies): * 100 km/h upgrade for 250,- Euro incl. VAT * Mesh extension (60 cm) for 989,- Euro incl. VAT * Aluminum extension side panels for 749,- Euro incl. VAT * Set of rear supports for 250,- Euro incl. VAT Sales, consultation and collection in Zell by appointment. Please note: Due to the current material shortages among suppliers, the offer prices for trailers, accessories and construction components may currently differ due to material price surcharges. Subject to prior sale and errors. Please inquire about availability and final prices. We have a large selection of new car trailers from the brands Humbaur, Saris, Böckmann, Stema, Pongratz, Humbaur and WM-Meyer, available immediately or in the short term. Also available for online ordering. For transport to your home, we will gladly provide you with our transport license plate for 20,- Euro. Delivery within Germany is possible for an additional charge!

Condition: new, maximum load weight: 2,000 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, Saris K3 306 170 2700 E Three-way Tipper Electrically Tiltable Body dimensions: 3.06 x 1.70 x 0.30 m Gross vehicle weight: 2,700 kg Knodsx T R Ryjpfx Ak Dec NEW VEHICLE – Robust three-way tipper with a steel sheet floor reinforced by a sturdy wooden base. Electric tipping function, offering numerous accessory options. * Steel sheet floor reinforced with wooden base * 4 fold-down sides * Electrically tiltable including battery * All aluminium side panels can be folded down and removed * 6 lashing rings inside and 8 outside * Fully galvanized and welded chassis Available accessories: * Aluminium loading ramps (load capacity 2,700 kg/pair) stored in compartments, €849 incl. VAT * Side wall extensions (30 cm) €949 incl. VAT * Mesh extension (60 cm) €989 incl. VAT * Mesh extension (90 cm) €1,149 incl. VAT * 100 km/h upgrade €250 incl. VAT * Heavy-duty supports €250 incl. VAT Sales, consultation, and collection in Zell by appointment. Please note: Due to the current material shortages among suppliers, trailer, accessory, and component prices may vary due to material surcharges. Subject to prior sale and errors. Please enquire for availability and final pricing. Large selection of new car trailers from Saris, Böckmann, Stema, Pongratz, Humbaur, and WM-Meyer available immediately or at short notice. Also available for online ordering. For self-transport, we are happy to provide a temporary license plate for €20. Delivery within Germany is possible for an additional charge!

Condition: used, maximum load weight: 13,390 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2000, next inspection (TÜV): 10/2026, Schwarzmüller 3-way tipper in good condition ---- Technical specifications: General: * Front axle load: 9,000 kg * Rear axle load: 9,000 kg Cab: * Refrigerator: No Engine: * AdBlue: Yes Transmission: * Retarder: No Chassis: * Suspension: Air suspension * Alloy wheels: No * Lift axle: No * Steering axle: No * Permissible axle load: 9,000 kg Fifth wheel: * Disabled kingpin: No Documents: * Unladen weight: 4,600 kg * MOT/emissions valid until: 10/2026 Knedpfs Aa Hg Sox Ak Dsc