Used Kässbohrer Low Loader / Lowbed Trailers for sale (136)

Condition: excellent (used), functionality: fully functional, empty load weight: 12,500 kg, maximum load weight: 29,500 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 11,200 mm, loading space width: 2,550 mm, suspension: air, color: red, Year of construction: 2022, Kässbohrer LB2 TIEF-BETT low loader semi-trailer / 16.5 m / Extendable semi-trailer / steered axles / 2 units Year 2022 Technical data GVM 42000 kg Registered GVM 38000 kg Weight 12500 kg Load capacity 29500 kg 2 steered axles BWP axles Pneumatic suspension Disc brakes Remote control Detachable front The length of the main deck 660 cm The length of the extendable deck 460 cm Total length of the main deck 1120 cm Rear deck length 270 cm Height for driving 40 cm Width with extensions 255 cm Core width 130 cm Expanded by 25 cm to each side Special permissions: Vehicle width 3.20 m The distance between the axis of the coupling pivot and the rear end of the semi-trailer 16.525 m GVM 38000 kg Permissible pressure on an axle group 20000 kg (1st axle – 10000 kg; 2nd axle – 10000 kg) The semi-trailer is in excellent technical and visual condition. Gbelhszf Eq Ajccqtsp Full documentation. 2 identical semi-trailers available

Condition: good (used), functionality: fully functional, empty load weight: 4,100 kg, maximum load weight: 34,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2019, suspension: air, tire size: 235/75 R17,5, color: black, Year of construction: 2019, Multicont ATL Mega container body for 40-foot and 45-foot containers, 45-foot swap body, rear underrun protection for 45-foot extendable containers, chassis available in 91161 Hilpoltstein. Golhccevrz Nxeqtobp

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, total length: 13,800 mm, total width: 2,750 mm, total height: 3,200 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - Lift Axle - Steering Axle = Remarks = Chassis Kingpin / fifth wheel diameter: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Special Transport 2-piece ramps: ✓ Hydraulic ramps: ✓ Length of loading floor: 920 cm ( 1420 cm extended) Lowbed trailer: ✓ Max width: 325 cm Max. length: 1420 cm Expandable: ✓ Extendable: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 5-axle extendible semi- lowbed trailer, Gross weight 84000 kg, Year of construction 2019, Load bed lenght 920 cm, Max load bed lenght when extended 1420 cm, Max load bed width with outriggers 325 cm, Load bed height 90 cm, Goose neck lenght 410 cm, Hudraulic ramps, Air suspension, 2 lift axles, 2 steering axles, BPW Eco Plus axles, Drum brakes, ABS, Passive steering, Shipment dimensions 1380x275x330 cm = More information = Axle configuration Tyre size: 245/70 R17.5 Make axles: Bpwecoplus Brakes: drum brakes Suspension: air suspension Front axle 1: Double wheels; Lift axle; Tyre profile left outer: 45%; Tyre profile right outer: 45% Front axle 2: Double wheels; Lift axle; Tyre profile left outer: 30%; Tyre profile right outer: 55% Middle axle: Double wheels; Tyre profile left outer: 25%; Tyre profile right outer: 20% Rear axle 1: Double wheels; Steering; Tyre profile left outer: 45%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Steering; Tyre profile left outer: 35%; Tyre profile right outer: 35% Weights GVW: 84.000 kg Identification Golhjzc Eiujccqtsbp Registration number: N2627491 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 05/2022, loading space length: 19,190 mm, loading space width: 2,550 mm, total length: 179,900 mm, total width: 2,550 mm, suspension: air, tire size: 245/70-R17.5, color: other, Year of construction: 2022, Equipment: ABS, = Additional options and accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes - Central lubrication system = Remarks = Attractive 2022 KASSBOHRER LOWBED LB3E extendable low loader with ABS/EBS, extendable once (600 cm), hydraulic ramps (265x85 + 140x85 cm), BPW Eco-Plus axles with drum brakes, 1st axle = lift axle, 3rd axle = steering axle (trailing axle), hardwood floor (floor height: 89 cm) with side extensions (left + right: extendable up to 3,150 mm), heavy-duty lashing rings in the side beams (left + right), heavy-duty lashing rings in the floor (left + right), rear support legs, 4x width markers, tyres 245/70-R17.5 (tread left: 6/7, 6/12, 9/4 mm; tread right: 8/4, 5/8, 6/7 mm), unladen weight: 13,060 kg, gross vehicle weight: 48,000 kg, Belgian registration with valid technical inspection until 24/05/2026 = Further information = Axle configuration Tyre size: 245/70-R17.5 Axle make: BPW Eco-Plus Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tyres; lift axle; max. axle load: 10,000 kg; tyre tread left inner: 45%; tread left outer: 40%; tread right inner: 25%; tread right outer: 50% Rear axle 2: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 75%; tread left outer: 40%; tread right inner: 50%; tread right outer: 35% Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered; tyre tread left inner: 25%; tread left outer: 55%; tread right inner: 45%; tread right outer: 40% Weights Unladen weight: 13,060 kg Payload: 34,940 kg Gross weight: 48,000 kg Gslhcoyz A Ugocqtsbp Functional Body make: KASSBOHRER LOWBED LB3E Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Identification Registration number: QACP318 Further information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 05/2022, loading space length: 19,190 mm, loading space width: 2,550 mm, total length: 179,900 mm, total width: 2,550 mm, suspension: air, tire size: 245/70-R17.5, color: other, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes Gjlhcszad Anjcqtsbp - Central lubrication system = Notes = Beautiful 2022 KASSBOHRER LOWBED LB3E extendable low-bed trailer with ABS/EBS, 1x extendable (600 cm), hydraulic ramps (265x85 + 140x85cm), BPW Eco-Plus axles with drum brakes, 1st axle = lift axle, 3rd axle = steering axle (trailing axle), hardwood floor (floor height: 89 cm) with widening options (left + right: can be widened for semi-trailers up to 3150 mm), heavy-duty lashing eyes in the side members (left + right), heavy-duty lashing eyes in the floor (left + right), rear support legs, 4x width markings, tires 245/70-R17.5 (tread depth left: 6/7, 6/12, 9/4 mm; tread depth right: 8/4, 5/8, 6/7 mm), unladen weight: 13,060 kg, permissible total weight: 48,000 kg, Belgian registration with valid technical inspection until 24.05.2026 = Further Information = Axle configuration Tire size: 245/70-R17.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Lift axle; Max. axle load: 10,000 kg; Tire tread depth left inner: 45%; Tire tread depth left outer: 40%; Tire tread depth right inner: 25%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Max. axle load: 10,000 kg; Tire tread depth left inner: 75%; Tire tread depth left outer: 40%; Tire tread depth right inner: 50%; Tire tread depth right outer: 35% Rear axle 3: Dual tires; Max. axle load: 10,000 kg; Steering; Tire tread depth left inner: 25%; Tire tread depth left outer: 55%; Tire tread depth right inner: 45%; Tire tread depth right outer: 40% Weights Unladen weight: 13,060 kg Payload: 34,940 kg GVW: 48,000 kg Functional Body brand: KASSBOHRER LOWBED LB3E Extendable body: Yes Condition Technical condition: very good Optical condition: very good Identification License plate: QACP318

Condition: used, empty load weight: 10,720 kg, maximum load weight: 37,280 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 02/2027, suspension: air, tire size: 245/70 R17,5 ---/141J, color: other, gearing type: other, front tire size: 245/70 R17,5 ---/141J, rear tire size: 245/70 R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, completely drive-over, -- Misprints, errors and changes excepted, sample images --, More data at: !, More Details: ! Gjlhccqjziammotjbp

Condition: used, maximum load weight: 30,950 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2024, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, KÄSSBOHRER K.SLS 3 / ON - 18/30 LOW LOADER - GENERAL ? Brand new Kässbohrer low loader with hydraulic ramps ? Type K.SLS 3 / ON - 18/30 ? Air suspension ? Tire size 245/70 R17.5 ? Tare weight approx. 11,050 kg DIMENSIONS ? Overall length 13,190 mm ? Platform length 9,240 mm ? Platform height 875 mm ? Overall width 2,550 mm ? With side extensions up to 3,150 mm ? Gooseneck length 3,950 mm WEIGHTS ? Permissible gross vehicle weight 48,000 kg at 80 km/h ? Permissible gross vehicle weight 52,800 kg at 60 km/h ? Total axle load 30,000 kg AXLES AND CHASSIS ? 3 SAF axles ? Air suspension ? WABCO EBS 4S/3M ? ABS + RSS ? WABCO SmartBoard RAMPS AND LOADING AREA ? Hydraulically folding 40-ton ramps ? Ramp length 2,750 mm ? Ramp width 850 mm ? Hydraulic sliding system ? 45 mm hardwood floor ? Diamond plate over the wheel arches CARGO SECUREMENT ? Several lashing points with 8,000 daN and 13,400 daN ? 7 pairs of stake pockets with stakes ? Container locking for 1 x 20-foot container ? Front bulkhead 450 mm ? Side and rear walls made of aluminum BODY AND CHASSIS ? High-strength S700 MC steel ? Partially metallized (Zn/Al 85/15) ? Reinforced corrosion protection ? Rear angle 10° ? 2" kingpin ? Mechanical support legs at the front ? 45-ton support at the rear EQUIPMENT ? 2 toolboxes ? Rotating beacon ? LED lighting ? Rear work lights ? Wheel chocks ? Extensions 9 x 2 (up to +300 mm) ? Stake box ? Reflective strips on the side and rear Golozdl Skshccqtjbp * 8.2 t winch mounted in a storage box in front of the front bulkhead PAINTING ? RAL 3020 Traffic red Further information available upon request.

Condition: used, maximum load weight: 38,048 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,190 mm, loading space width: 3,150 mm, loading space height: 890 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2020, Equipment: ABS, Kaessbohrer LB3E semi low loader with hydraulic ramps First registration BPW Eco Plus axles Lifting axle Drum brakes with ABS and EBS Air suspension Tyres: 245/70 R17.5, 40/45% Gross weight: 48,000 kg, unladen weight: 9,952 kg, payload: 38,048 kg Gooseneck length: 3.95 m Low bed length: 9.24 m Width: 2.55 m + 2x30 cm Loading platform height: 89 cm Hydraulic ramps with side shift Rear supports Lashing rings Stake pockets Errors and prior sale excepted Gbolhccqjy Eupwetep

Condition: used, maximum load weight: 43,860 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 01/2020, loading space length: 18,640 mm, loading space width: 3,250 mm, loading space height: 890 mm, total width: 2,750 mm, total height: 355 mm, Year of construction: 2020, Equipment: ABS, Kaessbohrer LB4E Semi Low Loader Gelhcsx Ianqjcqtebp First registered in 2020 BPW Eco Plus axles 1 lift axle 2 last axles self-steering Drum brakes ABS/EBS Tyres: 245/70 R17.5 34/40% Air suspension Gross weight: 58,000 kg, unladen weight: 14,140 kg, payload: 43,860 kg. Neck length: 3.40 m Low bed length: 9.24 m + 6.00 m extendable Total loading length: 18.60 m Width: 2.75 m + 2x30 cm Loading platform height: 89 cm Hydraulic ramps 2 rear supports Lashing rings 24V powerpack for ramp hydraulics Subject to errors, typos, and prior sale.

Condition: used, maximum load weight: 29,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2019, total width: 2,550 mm, total height: 3,020 mm, Equipment: ABS, Kässbohrer low-loader semi-trailer with 3 axles and 2 ramps Equipment: + 1st axle is liftable + Last axle is a steering axle + 2x hydraulic 300 mm loading ramps + 2x outriggers + 4 meters extendable + Removable wheel recesses for 3.40 m machines + Axles by BPW + Air suspension + ABS Geley H Tfmehccqtsbp We would also be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale excepted.

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Golhccqoyrkpxetobp Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. --- Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin - Mechanical landing legs at front Golhccqsx Efzustsbp - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed with Hydraulic Steering Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed Semi-Trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension travel: 260 mm (190 mm / -70 mm) * Additional ride height lift by 40 mm possible * Load gauge for axle load display * Semi-automatic alignment of steered axles with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED tail and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED beacon (1 unit) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system according to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on the gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2-inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood floor * Each platform size: 100 × 1,300 × 2,115 mm * Each platform weight: 225 kg * 2 × lashing rings per platform with 8,000 kg tensile force * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Gbeljynprwshccqtep Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform Stake pockets: * 6 × 2 units in the pool (50 × 100 mm) * 3 × 2 units at the rear (50 × 100 mm) Attachments & Accessories * Aluminum front panel on gooseneck: 360 × 1,550 mm * Aluminum side boards: 360 × 1,900 mm * Aluminum rear wall: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning panels (423 × 423 mm, up to 1,000 mm) * Yellow side reflector tape * Red rear reflector tape For further information, we are at your disposal.

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity Gbelhcew Nlzqocqtjp * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets Gbelsyhi H Iehccqtep MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, Telescopic with Wheel Recesses (NEW) ----Equipment & Highlights Technology & Construction: - Extendable low loader with wheel recesses - Overall length: 13,190 mm, platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Gross vehicle weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles: - 4 BPW axles, front 2 fixed, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring according to R141 Ramps & Loading Area: - Foldable 40-ton ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + covering bridges included - Digger arm recess at rear Load Securing: - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on outer frame/wheel recess area Gbolhccqsx Efznstjp - 5×2 stake pockets, removable stanchions 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort: - 1× tool box (700×400×360 mm) - Stanchion box - Beacon light - LED side lighting, LED work lights - Wheel chocks - Width marker boards with LED - Standard 2" kingpin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special features: - New & immediately available - High payload, extremely flexible application - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust construction, high-quality BPW components For further information, we are at your disposal.

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Technical Data: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable lowbed semi-trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Dimensions * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm with side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Gross vehicle weight rating: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tonnes per axle) * King pin load capacity: 18,000 kg Axle Equipment * Number of axles: 3 (2 rigid at front, 1 trailing axle at rear) * Lift axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Wheels * Tyre size: 245/70 R17.5 * Brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre life * Number of wheels: 12 (steel rims with ET120 offset) Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Two-line compressed air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting system: 24V, multi-chamber lamps by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connection * Connectors: NATO socket with 2 x 50mm² intermediate cable (3 m length) Ramps * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp floor: Made of hardwood Gslhccqju Tarpstobp * Safety features: Ramp safety tension chain included Load Securing * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity at the gooseneck - 4 x 2 lashing rings with 6,000 daN in the recess area * Container lock cases: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Floor covering: 45 mm thick hardwood and steel deck with checker plate * Wheel recess bridge: Removable hardwood bridge sections with steel supports to cover wheel recesses * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) * Partial metallization of contact surfaces Condition * New and immediately available. * Perfectly suited for heavy haulage and use in construction or machinery relocation.

Condition: used, maximum load weight: 26,827 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 16,240 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Boom Recess Hardly Used Immediately Available Including Winch TECHNICAL SPECIFICATIONS: * Fifth wheel height (H5): approx. 950 mm * Rear swinging door: 2,300 mm * Overall length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle spacing (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load: 8 tons load capacity * King pin capacity: approx. 15,000 kg * Unladen weight ±3%: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with extendable sides) * Sliding platform: Not included * Total weight (at 80 km/h): 39,000 kg * Total weight (at 60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 * Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle: Overload-dependent manual axle lift system on the 1st axle * Lift axle control: Manual * Wabco braking system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel holder on front bulkhead * Air suspension, 1 x load gauge indicating pressure at the axle assembly * NATO socket Geljxy Ddkjhccqtebp CHASSIS: * S700 MC * Gooseneck with 90° vertical corners * 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only * Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm * Jost landing gear, 50 tons * Foldable rear supports, 45 tons * 2 pairs of wheel wells for transporting wheeled vehicles * Wheel well bridge for covering the wells RAMPS: * Ramp loading capacity: approx. 40 tons * Suitable for hydraulic folding and adjustment * Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons * Rear ramp safety: Ramp protection chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included * Stake pockets: 5 x 2 stake pockets (52 x 102 mm) * 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers * Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 units, 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W) * 1 x rotating beacon * 1 x work light on underrun guard * Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Timber planks for oversize transport * Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: Gbslhcot Aqv Socqtep * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low-Loader Extendable with Wheel Wells (NEW) ---- Equipment & Highlights Technology & Construction - Extendable low-loader trailer with wheel wells - Overall length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height only 875 mm for a low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight approx. 14,071 kg - Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles - 4 BPW axles: front 2 rigid, rear 2 self-steering axles - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tires 245/70 R17.5 (M+S + 3PMSF) - Tire pressure monitoring system per R141 Ramps & Loading Area - Foldable 40-ton ramps - Ramp length 2,750 mm, width 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel wells and bridging plates included - Excavator arm recess at the rear Load Securing - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at the gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on the platform - 8,000–10,000 daN at the outer frame / wheel well area - 5×2 stake pockets, detachable stakes 50×100 mm - Container locks for 1×20 ft or 1×30 ft Equipment & Comfort - 1× toolbox (700×400×360 mm) - Stake box - Beacon light - LED side marker lights, LED work lights Gelhccox Ix Rqoqtjbp - Wheel chocks - Width indicator panels with LED - Standard 2" kingpin - Metallised chassis (Zn/Al 85/15) – high corrosion protection - Colour: Red ---- Special Features - New & immediately available - High payload, extremely versatile - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust design, high-quality BPW components We are happy to provide further information on request.

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity Gbelswmh H Eehccqtjp * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle Golhccow Ii A Ajqtobp LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total height: 131,000 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Gslhcewh Uipocqtebp

Condition: used, empty load weight: 16,200 kg, maximum load weight: 48,050 kg, overall weight: 64,250 kg, axle configuration: > 3 axles, first registration: 08/1976, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total height: 131,000 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, Kässbohrer axles, leaf suspension, forced steering, lashing rings, 2-piece loading ramps, front support. Bodywork: 750 mm ramp width, fifth wheel height 1550 mm, king pin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, overall length 13,100 mm. ACCESSORY DETAILS WITHOUT WARRANTY, subject to modifications, intermediate sale and errors excepted! Gelhsxyzyijccqtjbp

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total height: 142,000 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors! Gslexwa Uyohccqtebp