Low loader semi-trailer

Kässbohrer Containeraufbau

Condition: used, mileage: 53,857 km, power: 270 kW (367.10 HP), first registration: 06/2003, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro3, total width: 2,680 mm, total height: 3,750 mm, Equipment: parking heater, Liebherr UTM 735 - Crane: LTM 1055/1 - Year of manufacture: 2003 - 22,439 operating hours (carrier chassis) - 18,883 operating hours (crane superstructure) - 53,857 km mileage - 4 x hydraulic boom extension - 16 m jib - Hydraulic steering - 12 t additional counterweights - LED beacon lights - Technical inspection due: - Safety inspection due: 01.2026 - Tyres: 445/95 R 25 Isdpfow H Hwvex Aa Heia Subject to errors and prior sale. Internal vehicle number: 11218 WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp.

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Iodpovw Hmtofx Aa Hsia Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: used, mileage: 67,218 km, power: 270 kW (367.10 HP), fuel type: diesel, color: yellow, Year of construction: 2011, Liebherr LTM 1070-4.2 Year of manufacture: 2011 Mileage: 67,218 km Operating hours: - Undercarriage: 2,266 - Superstructure: 8,419 Max. permissible weight: 48,000 kg CE-certified machine 12-ton axles Hydraulic suspension Air conditioning Radio remote control Max. lifting capacity at 2.5 m radius: 70 tons Max. lifting height including jib: 65 meters Max. outreach with jib: 48 meters Boom length without jib: 11–50 meters Liebherr D936 LA6 engine 270 kW / 367 HP ZF 12 AS 2302 automatic transmission LICCON 2 16-meter jib Single hook + 3-sheave hook block Tyres: 385/95R25 80% ID no.: 559 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations made by Heinhuis, to all agreements entered into by Heinhuis, and to all preceding negotiations. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have read these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2011 Intended use: Construction Drive: Wheel Gross vehicle weight: 48,000 kg CE certification: Yes Price: On request = Company information = For more information: Iedjx T Alvjpfx Aa Hoia WhatsApp:

Condition: used, mileage: 129,754 km, power: 368 kW (500.34 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2028, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, crane, Internal vehicle number: VTC30026 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions [mm]: 6400 x 2550 Palfinger PK53002 SH 1159 operating hours 4m – 10,800 kg 6m – 7,600 kg 8m – 5,700 kg 10m – 4,450 kg 12m – 3,650 kg 14.5m – 3,050 kg ELBO PCS trailer (included in vehicle price) EUR 17,900 Ref. No.: VTC30018 Year of manufacture: 2023 Current weight: 4,650 kg Permissible payload: 13,350 kg Iiodpfxsyrv Tcj Aa Hja Overall dimensions: 8,250 x 2,550 mm Loading area dimensions: 6,400 x 2,550 mm Tyres: 235/75 R17.5 Suspension: Air suspension Brakes: Drum brakes Hydraulic ramps Errors excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly through our company. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, Year of construction: 2023, operating hours: 5 h, fuel type: diesel, color: blue, power: 10 kW (13.60 HP), mileage: 5 km, Equipment: additional headlights, all wheel drive, cabin, rubber tracks, standard shovel, Gekko Network KG in Gersthofen - your supplier for vehicles of all kinds. You can reach us by phone, email or in person. Model CX15CP Technical parameters: Weight kg 1520 Bucket capacity m³ 0.025 Bucket width mm 380 Boom length mm 1560 Arm length mm 793 Tank capacity l 20 Hydraulic accumulator capacity l 13 Isdpoklwvcsfx Aa Heia Hydraulic system : Oil pump model DHP0010 Maximum oil pump pressure MPa 17 Hydraulic pump flow rate l/min 28.5 Performance: Rotation speed ipm 10 Travel speed km/h Gradeability 25 % Ground pressure kN 25 Bucket breakout force kN 9.6 Boom impact force kN 8.5 Engine: PERKINS Rated power kW / rpm 10.3 / 2400 / 14.7 / 2200 Maximum torque N - m 51.8 / 51.8 Number of cylinders 3/3 Air cooling Working range: max. digging radius mm 3225 max. digging depth mm 1650 max. digging height mm 2740 max. unloading height mm 1970 max. height of raised dozer blade mm 170 max. depth of lowered dozer blade mm 220 Boom swing angle 50 ° left / 70 ° right Dimensions: Wheelbase mm 950 Rail length mm 1290 Distance mm 405 Counterweight swivel radius mm 850 Width mm 1055 Track width mm 180 Rail height 320 mm Length mm 3160 Height (without / with roof) mm 1570/2200 Please note that some of the vehicles in our range may be in our external warehouse and are not directly available for viewing on site. In any case, please contact us in advance atOur complete offer is available on request. Construction machinery, Other construction machinery Year of construction: 2021 Operating hours: 8 Environmental sticker: -- All-wheel drive equipment Are you looking for other construction machinery or equipment? Please do not hesitate to contact us.

Condition: used, maximum load weight: 45,900 kg, overall weight: 58,600 kg, axle configuration: 3 axles, first registration: 06/2013, Equipment: ABS, Vehicle identification number: YAFTL313000014129 First registered: 05.06.2013 DE HU due Iodpfx Aasp Spkge Hoia Own weight: 12,700 kg Total length: 17,000 mm Gooseneck 3,700 mm King pin standard 3.5 inch - fifth wheel height: 1,320 - 1,350 mm Low bed length: 8,500 mm - Loading height: approx. 450 mm (ground clearance approx. 150 mm) Chassis frame: 4,300 mm - Loading height: approx. 900 mm Suspension - air suspension - approx. -80 / + 160 mm Excavator trough - bucket handle trough Rack pockets including stanchions Fifth wheel load technically up to 25,000 kg Axle loads 3 x 11,200 kg SAF axles with drum brakes 3 x hydraulically forced-steered axles with cable remote control Tires: 235/75 R 17.5

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 30,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2010, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.55 r 22.5, color: red, Year of construction: 2010, Equipment: ABS, sem tecnokar with coil hole, 3 disc axles with 1st liftable and 3rd steering, abs, air suspension, abs, n°6 pairs of side pillar seats + 6 central through seats + 5 front and rear seats, square tube, n°3 twist crosspieces for container accommodation of: 1 x 20 flush rear + 1 x 20 balanced + 1x30 flush, 100cm front head, stainless steel boxes, year 2010, INTERDRIVE SRL-PARMA DEALER Iiodswg Hb Uepfx Aa Hja

Condition: new, empty load weight: 13,250 kg, maximum load weight: 47,550 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, suspension: air, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform in extendable version: Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 40,000 kg Seat posts: JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 245/70 R 17.5 Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: Iijdol Uxdkopfx Aa Hea 2" kingpin One galvanized steel end wall approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 4 restraining shoes with holder on the bulkhead One spare wheel with holder in front of the bulkhead Electro-hydraulic unit Re-steering from the front and rear by means of cable remote control operated via pushbuttons with tracking control of the axles Mounting in the rear area of the gooseneck for ALU docking lights European reflector plates (red/yellow) at the rear of the trailer White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red On the gooseneck and on the ramps on the left and right, a holder for the warning signs including a socket A bracket for a rotating beacon at the rear of the trailer Galvanized folding supports under the sloping loading area Operating valves for the ramps fitted on the right-hand side of the trailer Cover plates to bridge the gap between the ramps and the cargo bed A mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm The rear galvanized stanchions are removable Length of the body approx. 2,560 mm One tool box INOX 1,350 x 400 x 400 on the gooseneck Box covered oil filler plug 4 pairs of WADER container pockets in t

Condition: used, machine/vehicle number: XLRAC85MC0G012278, mileage: 309,000 km, first registration: 01/2013, tire size: 315/80 R22.5, axle configuration: 8x2, color: other, suspension: other, total length: 9,900 mm, total width: 2,500 mm, total height: 4,100 mm, loading space length: 5,700 mm, loading space width: 2,500 mm, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - Sper = Remarks = Cabin Right hand drive: ✓ Chassis Chassis height: 100 cm Wheelbase: 205 cm (1-2) 300 cm (2-3) 140 cm (3-4) Fuel tank capacity: 400 L Brand trailer coupling: VBG Structure Platform: ✓ Tank Fuel: ✓ Crane Number of hydraulic extensions: 6 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Maximum crane load capacity : 18000 kg at 3.0 meters, 16700 kg at 3.9 meters, 14.600 kg at 4.7 meters, 10.800 kg at 6.2 meters, 8100 kg at 8.0 meters, 6400 kg at 9.9 meters, 5200 k Maximum crane reach: 16.30 m NON DUTY FREE VEHICLE, REQUIRES CUSTOMS CLEARANCE // RIGHT-HAND DRIVE // Hiab XS855 EP6 Hipro loading crane with hook, Max horizontal reach 16.3 meters, Max load capacities 18000 kg at 3.0 meters, 16700 kg at 3.9 meters, 14.600 kg at 4.7 meters, 10.800 kg at 6.2 meters, 8100 kg at 8.0 meters, 6400 kg at 9.9 meters, 5200 kg at 11.9 meters, 4350 kg at 14.1 meters, 3750 kg at 16.3 meters, 6 Hydraulic extensions, 4 support legs, radio control, Year of construction 2013 // Truck 8x2, RHD, Automatic gearbox, Diff. lock, Adblue, Euro 5, Steel front suspension, Air rear suspension, 3rd axle lift and steering axle, Day cabin, Digital tachograph, Shipment dimensions 990x250x410 cm Isdpfxsu H Irgj Aa Hoia = More information = Axle configuration Tyre size: 315/80 R22.5 Axle 1: Steering; Tyre profile left: 45%; Tyre profile right: 55%; Suspension: leaf suspension Axle 2: Steering; Tyre profile left: 50%; Tyre profile right: 55%; Suspension: leaf suspension Axle 3: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 65%; Suspension: air suspension Axle 4: Lift axle; Steering; Tyre profile left: 65%; Tyre profile right: 50%; Suspension: air suspension Weights Empty weight: 13.500 kg Carrying capacity: 20.500 kg GVW: 34.000 kg Functional Crane: Hiab XS855 EP6 Hipro, year of manufacture 2013, behind the cab Make of bodywork: Hiab Identification Registration number: PF63JUY = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, empty load weight: 14,800 kg, maximum load weight: 61,700 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings -Hardwood decking 30 mm thick Loading area: -Loading area in extendable design with rear bevel of approx. 500 mm x 8° -9 pairs of lashing rings can be folded outwards -1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles and suspension, 1st axle self-steering, 2nd + 3rd axle rigid, 4th + 5th axle self-steering. -Technical axle load: 12,000 kg -1.4th and 5th axle with electro-magnetic reverse lock via reverse gear and manual activation -235/75 R 17.5 3PMSF tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) Steel construction: -steel construction made from high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) Isdpfoma Hf Rsx Aa Hsia -S690QL/S700MC (yield strength 690MPa) Accessories: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -2 pieces of restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized extensions, extendable by approx. 230 mm on each side -One bracket for a rotating beacon at the rear of the trailer -Galvanized supports under the bevel of the loading area -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -3 pairs of WADER container pockets in the loading area for a 20ft (30ft) or a 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Sliding suspension rails for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the sloping loading area -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -One bracket for rotating beacon on the warning signs -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)