Low loader semitrailer

KÄSSBOHRER SLAR3 Tele Tiefbett Radmulden metallisiert

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Technical Data: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable lowbed semi-trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Dimensions * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm Lrsdpfsu Tarpex An Ijn * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm with side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Gross vehicle weight rating: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tonnes per axle) * King pin load capacity: 18,000 kg Axle Equipment * Number of axles: 3 (2 rigid at front, 1 trailing axle at rear) * Lift axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Wheels * Tyre size: 245/70 R17.5 * Brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre life * Number of wheels: 12 (steel rims with ET120 offset) Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Two-line compressed air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting system: 24V, multi-chamber lamps by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connection * Connectors: NATO socket with 2 x 50mm² intermediate cable (3 m length) Ramps * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp floor: Made of hardwood * Safety features: Ramp safety tension chain included Load Securing * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity at the gooseneck - 4 x 2 lashing rings with 6,000 daN in the recess area * Container lock cases: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Floor covering: 45 mm thick hardwood and steel deck with checker plate * Wheel recess bridge: Removable hardwood bridge sections with steel supports to cover wheel recesses * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) * Partial metallization of contact surfaces Condition * New and immediately available. * Perfectly suited for heavy haulage and use in construction or machinery relocation.

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drive: Wheel drive Unladen weight: 27,875 kg Load capacity: 23,800 kg Dimensions of the cargo area: 1110 x 255 x 390 cm Serial number: 122024 Condition of front tires: 70 Ledpfx Anow A Hb Te Ijrn Condition of rear tires: 70 Please contact PFEIFER GROUP for further information.

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Steel floor with anti-slip surface -Including rail for aluminum ramps -2" – Kingpin -Mechanically operated BPW landing gear -550 mm long, 8’ bevel at the end of the gooseneck -Front bulkhead incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted vertically on the front of the gooseneck -3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck -Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized) -Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right Loading platform, single telescoping: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Fixed section at the front 700 mm -Sheet metal floor with anti-slip surface -Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses -Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -Supports for widening to 3,000 mm -Beveled vehicle rear 8°, 550 mm long -Sled design for easy installation and removal of ramps -Continuous mudflap at the rear -1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform -6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform -1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform -1 pair of rail pocket strips approx. in the center of the loading platform -1 pair of rail pocket strips on the fixed section -1 pair of rail pocket strips behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wood deck larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (dismantling system) Lrjdpfei Ai E Rex An Ien Chassis: -Axle manufacturer BPW ECO Max -2 ride heights -4 axles á 10 t (technically 12 t) -Twin tires 245/70 R17.5 -2 x fixed axle and 2 x friction-steered axle -Reverse steering lock of the friction-steered axle via reverse gear -Brake system manufacturer Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible) Accessories: -4 chocks with holder -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm -Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included -Plug-in partition sheet at the end of the excavator recess -Electro-hydraulic unit for ramp operation -Ramp operation via wireless remote control -Hydraulic support legs at the rear of the vehicle for support during the loading process -1 pair of additional reversing lights rear, switched on in reverse gear -Wood widening planks - larch (option)

Condition: used, maximum load weight: 42,500 kg, overall weight: 60,000 kg, axle configuration: 3 axles, first registration: 06/2022, with 12 axles, hydraulically suspended and divided, with hydromechanical forced steering, rear taper and drive-on ramps STZ-L Gooseneck - Robust welded steel construction - Engineered loading platform 3,950 x 2,480 mm including rear taper - Hydromechanical forced steering (dual-circuit steering system) - Turntable-mounted fifth-wheel plate with interchangeable 2-inch or 3.5-inch kingpin and adjustable steering wedge Lrjdpfxew Etd To An Ion - Fifth wheel load: 24 t - Rear max. steering radius: 2,600 mm Loading platform - Lowered outer sections 4,630 mm long, 420 mm deep, resulting in a loading height of 470 mm or 830 mm with floor inserts - Extendable by 2,053 mm - Includes aluminum bridging rails for creating level surfaces - Excavator boom trough at rear running gear: 4,900 mm long, 880 mm wide, 480 mm deep - Length of rear running gear: 4,900 mm incl. 500 mm rear taper, loading height 890 mm - One pair of wheel recesses in lower deck - 3-axle hydraulically suspended running gear - Split Gigant axles with 600 mm stroke Rear of vehicle - Tapered design, 500 mm - Rear hydraulic support Drive-on ramps - Two-part drive-on ramps, 2,850 + 1,850 mm long, 800 mm wide - Rubber-coated with climbing bars Braking system - Dual-line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical data Gooseneck Loading platform (LxW): 3,950 x 2,480 mm Loaded fifth wheel height: 1,300 mm Loading platform Platform (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer sections: 4,630 mm + 2,053 mm extension Center beam: 980 mm Excavator trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle: hydromechanically forced steered (dual-circuit system)

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. Ljdpfewta Alsx An Ijrn WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: excellent (used), functionality: fully functional, power: 205 kW (278.72 HP), fuel type: diesel, overall weight: 20,000 kg, Year of construction: 2025, operating hours: 400 h, Equipment: UVV, adjustable boom, onboard computer, We are pleased to offer you a WERT Phantom two-shaft shredder. - Used machine - Drive – Engine: CAT-C7 – 285 HP Hydraulics: Bosch-Rexroth Torque / gearbox: 240,000 Nm Discharge height: 3,100 mm Discharge conveyor: 1,000 mm wide Diesel tank: 380 l Hydraulic tank: 120 l Shaft length: 1,500 mm Shaft diameter: 650 mm Magnet weight: 1.1 t Lredjw T Stbjpfx An Ijn Total weight: 18.5 t Dimensions (L x W x H): 9.2 x 2.3 x 2.55 m Two-shaft shredder – ready for the future of recycling technology. A new milestone in the shredding industry. Driven by the vision to develop a shredder suitable for processing stone, minerals, concrete as well as waste wood, green waste, root wood, municipal and commercial waste, paper, or light scrap, we have successfully created the PHANTOM. This multifunctional shredder features a revolutionary quick-change shaft system and a tool-turning system. These technologies enable fast, uncomplicated, and low-maintenance replacement of tool shafts for different applications. The highest quality standards – “Made in Germany” – and simple, user-friendly operation are top priorities in manufacturing, ensuring high efficiency and maximum economic viability. Please feel free to contact us if you have any further questions! The contents of our offers have been created with the utmost care. However, we cannot guarantee the accuracy, completeness, or currentness of the content and prices.

Condition: used, mileage: 567,557 km, power: 309 kW (420.12 HP), first registration: 02/2015, fuel type: diesel, tire size: 315/60R22.5, axle configuration: 6x2, wheelbase: 4,570 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,730 mm, total width: 2,520 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, seat heater, traction control, = Additional options and accessories = - Electrically foldable exterior mirrors - Remote central locking - Leather interior - Lift axle - Air suspension - PTO - Radio - Disc brakes - Sun visor - Auxiliary heating - Toolbox = Notes = Volvo FH 420 6x2 First registration: 11-02-2015 Mileage: 567,500 km Euro 6 Steered trailing axle Fridge 2 fuel tanks New generation tachograph Draco semi-trailer Type: DSC 339 First registration: 2003 Maximum gross weight: 39,000 kg Forced steering / Tridec system Twist-locks Stake pockets Removable support frame mountable on the twist-locks Toolboxes Loading deck height: 90 cm Loading deck length: 910 cm + 650 cm extendable Distance from crane to end of trailer: 12.10 m Palfinger PK78002 D 5 hydraulic extensions up to 13.9 m 1 manual extension up to 16 m Hydraulically stabilised Scanreco radio remote control Continuous rotation = Further information = Technical information Number of cylinders: 6 Axle configuration Tyre size: 315/60R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Dual tyres; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60% Rear axle 2: Steered; Tyre tread left: 70%; Tyre tread right: 70% Weights Unladen weight: 9,105 kg Payload: 17,395 kg Gross vehicle weight: 26,500 kg Functional Crane: Palfinger Interior Upholstery: Leather Financial information Lrsdpfx Ajycwkken Ion Price: On request Identification Type number: FH420 6x2*4 / SEMITRAILER + PALF = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information, but no rights can be derived from the descriptions provided.

Condition: used, maximum load weight: 23,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2025, loading space length: 9,200 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, GVN 3GVN29 OVERWIDTH SIGNPLATE/KOÇ/LIFT/P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT TECHNICAL DATA AND EQUIPMENT SHEET VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL TRADEMARK: * 3GVN29 ----WEIGHT SPECIFICATIONS WEIGHT IN OPERATING CONDITION * 13,000 KG DISTRIBUTION OF THIS WEIGHT ON THE AXLES AXLE 1: 3,653 KG AXLE 2: 3,653 KG AXLE 3: 3,653 KG ACTUAL VEHICLE WEIGHT * 13,000 KG TECHNICALLY PERMISSIBLE MAXIMUM TOTAL WEIGHT * 58,000 KG TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS AXLE 1: 12,000 KG AXLE 2: 12,000 KG AXLE 3: 12,000 KG TECHNICALLY PERMISSIBLE MAXIMUM WEIGHT ON AXLE GROUPS GROUP 1: 36,000 KG MAXIMUM TOTAL WEIGHT FOR REGISTRATION * 35,500 KG MAXIMUM AXLE LOADS FOR REGISTRATION AXLE 1: 8,000 KG AXLE 2: 8,000 KG AXLE 3: 8,000 KG MAXIMUM WEIGHT ON AXLE GROUPS FOR REGISTRATION GROUP 1: 24,000 KG TECHNICALLY PERMISSIBLE MAXIMUM STATIC WEIGHT ON THE COUPLING POINT * 22,000 KG TECHNICAL MAIN DIMENSIONS (COC) * OVERALL LENGTH 13,050 MM * LOADING AREA LENGTH 9,200 MM * VEHICLE WIDTH 2,550 MM * OVERALL HEIGHT 3,000 MM * PLATFORM HEIGHT APPROX. 910 MM * NUMBER OF AXLES 3 * TIRE SIZE 235/75 R17.5 * SUSPENSION AIR SUSPENSION * COLOR RAL 5011 ----EQUIPMENT LIST – EXTENDED SWAN NECK * FIXED SWAN NECK * STEEL FRONT WALL * 2 STEEL SIDE DOORS, PLUG-IN TYPE * 1 STEEL REAR DOOR, PLUG-IN TYPE * STORAGE COMPARTMENT AT THE FRONT * STORAGE COMPARTMENT AT THE FRONT UNDER THE SWAN NECK * LOADING AREA ON THE SWAN NECK LOADING PLATFORM * HIGH-STRENGTH S355 STEEL * PLATFORM EDGES CLADDED WITH WOOD * SURFACE COVERED WITH STEEL SHEETING * 14 SIDE EXTENSIONS, EACH PLUS 230 MM * 14 FORGED STEEL LASHING POINTS, 16 TONS EACH * EXTENDABLE PANEL FOR OVERWIDTH * OVERWIDTH SILL * WARNING SIGN FOR OVERWIDTH * FASTENING POINTS * ADDITIONAL SUPPORTS * PRESSURE INDICATOR AXLES AND SUSPENSION * 3 AXLES * OSMAN KOC AXLES, DESIGN-IDENTICAL TO BPW * STEERABLE AXLE, AXLE 3 * LIFT AXLE, AXLE 1 * TWIN TIRES ON ALL AXLES * SUSPENSION: FULL AIR SUSPENSION ON ALL AXLES * LIFT AXLE, AXLE 1, DRUM BRAKE BRAKE SYSTEM * EBS SYSTEM WABCO, ELECTRO-PNEUMATIC, EC NORM * AUTOMATIC REVERSE STEERING OF THE STEERABLE AXLE * DRUM BRAKES ON ALL AXLES TIRES AND RIMS * TIRES 235/75 R17.5 * SPARE TIRE YES * WHEELS 12 * MAXIMUM SPEED 80 KM/H * RIMS 6.75X17.5 STEEL, SILVER-GRAY * SPARE WHEEL AVAILABLE PAINTING * 2 LAYERS OF EPOXY PRIMER, 100 MICRONS EACH * MINIMUM 100 MICRONS OF 2K ACRYLIC PAINT * COLOR RAL 5011 ELECTRICS AND LIGHTING * 24 VOLT SYSTEM, EC NORM * WATERTIGHT, FROST-RESISTANT CONNECTIONS * SIDE AND POSITION LIGHTS * 6 REAR LIGHTS, 3 FUNCTIONS * 2 REVERSING AND WORK LIGHTS * 2 TURN SIGNALS * 2 LICENSE PLATE LIGHTS * 1 ROTATING BEACON * 2 TRIANGULAR REFLECTORS * REFLECTIVE STRIPS AND E-MARKING Lrjdpfew Dlqiox An Isn * TRAILER LIGHT SYSTEMS * ROTATABLE REAR REFLECTORS RAMP * FIXED HYDRAULIC LOADING RAMPS * HYDRAULICALLY SIDE-SHIFTING, LEFT AND RIGHT * SUPPORT FEET, 24 TONS DYNAMIC, 50 TONS STATIC, OMS * MANUAL RAMP SUPPORTS * POWER CONNECTION FOR HYD

Condition: new, maximum load weight: 37,390 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, activated via EBS (no truck-side installation required) ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve Lodpotpta Defx An Isrn ----Electrics / Lighting: * Smart-Board mounted on the trailer as an infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for oversize lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel sheet fenders * Spare wheel holder in front of the front wall cross member (spare wheel not included) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from the truck to the semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with front corners beveled at 45°, front toolbox of galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm aluminum drop sides (in RAL color of your choice), foldable and removable, on the sides of the fifth wheel platform * Rear board -150 mm- plugged in high * Rear beveled section at the fifth wheel platform leading to the low bed, approx. 700 mm long with checker plate cover; at the end, a perforated strip for hanging aluminum drive-on ramps * Fifth wheel platform with 50 mm clamped wooden planks, low bed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9x mechanical folding extensions to 3 m overall width, except in the rear bevel (extension planks available with closed storage compartment running transverse to the driving direction under the loading area) * 3 recesses under the fifth wheel platform for storing optional aluminum drive-on ramps or wooden planks for wheel recess covers ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame with 45° edges, hole pattern for lashing equipment (2 t lashing force per lashing point at minimum spacing of 480 mm) * 3x 13.4 t lashing rings recessed in the floor on each side (1x on the fifth wheel platform, 1x on the side members after the step, 1x above the middle axle next to the side member) Low loader platform: * 3x 13.4 t lashing rings on the outer frame on each side (1x at start of step on the fifth wheel platform, 1x at start of the ramp, 1x at end of the ramp) * 2x 10 t lashing rings on each side (1x between front wheel well and 1st axle, 1x between 2nd and 3rd axle) * 3x 5 t lashing rings on each side, bolted to the external frames of the wheel wells (2 at the front, 1 at the rear wheel well) ----Excavator arm trough: * Extended excavator arm trough from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile approx. W = 770 mm x dept

Condition: new, empty load weight: 14,350 kg, maximum load weight: 53,450 kg, overall weight: 67,800 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel, approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Lrsdpfeya E A Njx An Isn Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform and into the bevel to accommodate the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps individually hydraulically movable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" 25 mm rubber floor and steel plate floor approx. 5 mm as additional reinforcement on the platform bevel - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - BPW axles and suspension, 1st axle steerable, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire pressure sensors installed in all wheels including spare wheels Surface Treatment: - Complete steel construction blasted automatically with a shot blast machine after welding - Second shot blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure best corrosion protection - Final painting with 2 coats of 2K topcoat, single color in MB 7350 Novagrau Accessories Included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches - 1 spare wheel - Outer beam on gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of lying lashing rings at the rear of the gooseneck - 1 pair of removable ALU side walls on the gooseneck, approx. 400 mm high, anodized - 1 removable ALU rear wall on the gooseneck, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor over the gooseneck, tread plate covering over the king pin - 2" king pin - Round NATO socket on the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm in front of the axles, continuously open up to the gooseneck crossmember, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between the first and second axles, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm