Used Dinkel Open Flatbed Trailers for sale (13)

Condition: used, empty load weight: 3,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2015, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 950 mm, loading space volume: 17 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 5,800 mm, color: orange, Equipment: ABS, Disc brake Blsdpfx Ahjuv Hrqs Tsd EBS Payload 14,700 kg DC axles Extendable drawbar Errors excepted

Condition: used, maximum load weight: 12,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2026, loading space length: 7,410 mm, loading space width: 2,520 mm, loading space height: 3,050 mm, loading space volume: 56 m³, Equipment: ABS, * 7024 - Vehicle ID for phone inquiries * ABS, EBS, SAF axles, air suspension with lift/lower function, drum brakes, twin tyres, length-adjustable drawbar (cranked), 40 mm towing eye * Sliding roof, mounting rails for glass racks on the loading area, lashing eyes, pallet stop strips left & right, rear sliding tarpaulin, 65 cm rear aluminium drop side * Tyres 1st axle: 235/75R17.5 (6 / 8 / 7 / 9 mm) * Tyres 2nd axle: 235/75R17.5 (4 / 5 / 4 / 4 mm) Bljdpfeyg Ukpsx Ah Ted ----our e-mail address: our service for you: - Procurement of short-term or export number plates - Transport / delivery throughout the EU - Export customs clearance for vehicles to third countries If you have any questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Condition: used, maximum load weight: 14,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/1999, next inspection (TÜV): 02/2018, loading space length: 7,000 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, loading space volume: 17 m³, Equipment: ABS, * ABS * Lift axle Bsdpfed T Nytex Ah Tsld * SAF axles * Front support * Rear support * 5-chamber tail lights ----Construction: Building material platform, raised front wall, wooden floor, lashing eyes, foldable middle and rear stanchions. Sale only to traders. FOR EXPORTS ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, maximum load weight: 30,950 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, loading space length: 13,640 mm, loading space width: 2,470 mm, loading space height: 2,780 mm, loading space volume: 93 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2013, Equipment: ABS, 3-axle Dinkel semi-trailer VIN: D0D17089 Chassis / Attachments: * Air suspension // lifting and lowering * SAF landing gears * 3 x SAF axles with disc brakes * Tyres: 385/55 R22.5 * Tread depth remaining: Front ~20%, Middle ~10%, Rear ~40% * 2 x PVC storage boxes * Forklift pockets Body: * Tautliner * Certificate EN 12642 Code XL * Forklift pockets Weights: * Gross weight: 36,000 kg * Unladen weight: 5,050 kg * Payload: 30,950 kg Other: * German semi-trailer ---- Bodpfeymuilsx Ah Told New main inspections / safety checks or changes to gross weight (down-rating/up-rating) are possible on request. We are happy to assist you in obtaining export/transfer license plates. Delivery of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing or typographical errors, subject to changes, interim sale, and mistakes!---- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sales of new and used commercial vehicles. On 11,000 m², you will find a large selection of vehicles. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our clients an outstanding all-around service package and provide them with a competent contact person who will assist them during the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to help you arrange special transports. Temporary/export license plates We are happy to assist you in obtaining export/temporary license plates.

Condition: used, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2013, next inspection (TÜV): 02/2027, loading space length: 13,200 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Year of construction: 2013, Equipment: ABS, DINKEL BOX SEMI-TRAILER ? SAF AXLES ? LIFT AXLE ? DOUBLE-DECK ? ----VEHICLE CATEGORY ? SEMI-TRAILER ? BOX SEMI-TRAILER ? DOUBLE-DECK TRAILER Bodsylfl Ijpfx Ah Told MANUFACTURER / TYPE ? DINKEL ? TRAILER TYPE DSAKO 393000 BODY ? BOX BODY ? DOUBLE-DECK SYSTEM ? REAR SWING DOORS AXLES / CHASSIS ? SAF AXLES ? LIFT AXLE ? DISC BRAKES DIMENSIONS ? LENGTH: 13.20 M ? WIDTH: 2.48 M ? HEIGHT: 3.00 M CONDITION / GENERAL INFORMATION ? USED TRAILER ? SUITABLE FOR GENERAL CARGO / LOGISTICS / DOUBLE-DECK TRANSPORT ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. 500€ - 2,000€) * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2,000€ ----EXPORT DECLARATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5-DAY, 30-DAY PLATES AND 17-21 DAYS AUSTRIAN REGISTRATION EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries a deposit of at least €500.00 / €1,000.00 is required. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be charged.) Specifications, errors, and prior sale subject to change! More vehicles can be found on our homepage: Sale is exclusively subject to our terms and conditions – see homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute any legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. It is solely for the purpose of initiating a contract. The information provided here is given without guarantee and does not represent warranted characteristics.

Condition: used, maximum load weight: 14,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2017, next inspection (TÜV): 03/2028, Year of construction: 2017, Internal vehicle number: G200117 German vehicle On our yard in Kaufungen - Kassel, available immediately More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English)   2 axles Total permissible weight 18,000 kg Empty weight 3,490 kg     Subject to errors   We are happy to accept your used vehicle as payment. Blsdpfx Aou D U U Ash Ted Financing is possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, axle configuration: 2 axles, Year of construction: 2009, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Rear air suspension - Front air suspension = Remarks = For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Dinkel DSAFA 36000 incline loader Additional rear work lights, SAF axles, Wabco ABS, spring actuators, drum brakes, both axles steered, cargo area dimensions L 9.68m W 2.54m / over fifth wheel L 3.14m W 2.54m, tire tread 1st axle 10-12 mm, 2nd axle 11 mm, GVW: 36,000kg, unladen weight: 11,750kg, payload: 24,250kg On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be pleased to assist you. Bodpfx Ahjyfr Hfe Tsld Further information is available on our homepage. ... Errors, changes and prior sale excepted!!! - Steerable axle = Further Information = Unladen weight: 11,750 kg Payload: 24,250 kg GVW: 36,000 kg External dimensions: 0x2550x2800 Please contact Tobias Ebert for more information.

Condition: used, maximum load weight: 13,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2015, loading space length: 7,700 mm, loading space width: 2,250 mm, loading space height: 2,500 mm, Equipment: ABS, * Vehicle number: P18467 S * 2 axles (tandem) * Full air suspension Bsdpfeycrg Tex Ah Teld * ABS * Dinkel body * Mounting for forklift truck * Lift-lower device * EBS * Lift axle * Toolbox * Disc brakes * Swing walls * MB axles * Tires - 1st axle: 385/65R22.5 * Tires - 2nd axle: 385/65R22.5 * Internal dimensions L: 7.70m W: 2.25m H: 2.50m *Sale only to businesses, errors excepted! Functionality of extras not guaranteed! Advertising/company logos on vehicles may have been digitally edited in photos. WE SPEAK GERMAN, ENGLISH, GREEK, RUSSIAN, CROATIAN, ITALIAN, SPANISH, FRENCH, TURKISH, ROMANIAN, and ARABIC (?????) !!!!!

Condition: excellent (used), first registration: 06/2004, color: grey, Year of construction: 2004, Dinkel DTSAV 28000 low loader Year of manufacture: 2004 Unladen weight: 7,220 kg Total trailer length with suspension: 12.40 m Bed length: 8 meters Hydraulically steered Bedpfx Ahjxzhhvo Told = Further Information = Unladen weight: 7,222 kg Payload: 20,780 kg Gross vehicle weight: 28,002 kg Technical condition: very good Visual condition: very good Price: On request

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork Blsdpfelthguex Ah Tjd * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9 Bljdpfx Aowx Dbish Ted

Condition: new, maximum load weight: 37,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Excerpt from the equipment specification. Full equipment details available upon request. Chassis, cranked: * Special steel frame made from high-strength fine-grained steels, electrically welded at junctions * Well-dimensioned outer frame * 3-axle arrangement * Spray suppression over the wheels * All steel parts shot-blasted Bsdpewx Dcmefx Ah Told * Side underrun protection made from anodized aluminium, mounted * Increased point load approx. 30,000 kg over approx. 5,000 mm * Custom design in the cranked section — for maximum low-bed length in conjunction with AluLeg landing gear * Drop supports instead of telescopic landing gear, maximum rear overhang radius for the tractor unit: 2,100 mm Special body with extendable rear stanchions: * DINKEL – special superstructure * Self-supporting aluminium roof rail/profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps * Rear stanchions extendable up to approx. 4,200 mm (for loading/unloading only) * Three sliding stanchions per side with tension-relief springs * Additional central stanchion locks in the roof rail and parking position, operated by pull-cable and spring latch * DINKEL – mechanically adjustable lifting roof * Lifting roof height approx. 400 mm, operable from both or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, via height adjustment in the stanchions * Front panel overhang for driving under tarpaulin up to a total height of 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, bottom: 450 pockets, above: 4 rows of single pockets * In high-bed only 3 rows of insert slats, even spacing between them Floor: * Approx. 27 mm special waterproof bonded beech plywood, anti-slip surface * Steel plating in wheel arch area, forklift-suitable to DIN standard * Outer frame with flush surface Brakes: * WABCO compressed-air brake system with EBS according to EC Directive 71/320 EEC, including PREV (park-release safety valve). Spring brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display * Including WABCO tire pressure monitoring Axles: * 3 x 10,000 kg SAF axles with drum brakes, low-loader design * Air suspension with raise/lower device, total stroke approx. 230 mm * Third axle is a friction-steered trailing axle with electric and mechanical lock Twin tires: * 235/75 R 17.5, 12-ply premium brand of our choice, including spare wheel holder Lighting: * According to EC standards incl. LED side markers * Position lamps in LED version * 2 additional reversing lights * 2 work lights inside the front bulkhead, top Paintwork: * Chassis with body in RAL color (RAL 3002) * Center stanchions and axles KTL-coated black * Corner stanchions in hot-dip galvanized finish * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body in single-tone RAL color Included special equipment: * Air suspension in ECAS version, operated on the semi-trailer * Center stanchions with additional roof rail locks, operated from below via pull-cable * Additional external unlocking for sliding roof frame * 4 stanchion adapters for special outer frame profile, freely positionable locking of center stanchions * PVC sliding tarpaulin, color SILVER similar to RAL 9006, for overwidth and overheight, flat hooks, tarpaulin folds, locks with pawl/OCS * Roof tarpaulin trans

Condition: used, axle configuration: 2 axles, Year of construction: 2017, Empty weight: 3.490 kg Blsdpfxewhmdxj Ah Tod Carrying capacity: 14.510 kg GVW: 18.000 kg Tyre size on axle 1: 385/65 R22,5 Tyre size on axle 2: 385/65 R22,5