Used Stas Semitrailers With Walking Floor for sale (80)

Condition: used, overall weight: 39,000 kg, first registration: 01/2013, next inspection (TÜV): 07/2025, Equipment: ABS, Volume tipper 59 cubic meters Full aluminum Empty weight 7570 kg SAF axles with disc brakes Tires 60% Good condition Belgian registration Price 23,900 euros net Ndsdpfxevwhvpo Akkoc

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Ndods Adxg Sopfx Akkjc Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Ndjdpoupqi Eefx Akkoc Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking Nsdpfx Asu Dvw Sokkodc FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Condition: used, axle configuration: 3 axles, first registration: 09/2013, suspension: air, tire size: 385/65 R22.5, color: other, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 10 mm; tire tread depth right: 10 mm Rear axle 2: Tire tread depth left: 7 mm; tire tread depth right: 8 mm Rear axle 3: Tire tread depth left: 5 mm; tire tread depth right: 6 mm Weights Unladen weight: 5,340 kg Payload: 32,660 kg GVW: 38,000 kg Ndjdez Hukxjpfx Akksc Condition Damage: none

Condition: used, empty load weight: 11,245 kg, overall weight: 36,000 kg, Year of construction: 2009, Equipment: ABS, STAS/ALU/TIPPER Year of construction: 10/2009 Ndodpfovdrt Sjx Akksc 2 axles Total weight: 36000 kg Empty weight: 11245 kg ABS

Condition: new, maximum load weight: 27,976 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,150 mm, loading space width: 2,330 mm, loading space height: 2,290 mm, loading space volume: 55 m³, Equipment: ABS, Stock no. 5627 Immediately available! Purchase, rental, or rent-to-own options according to agreement! Approx. 55m³ Stas steel tipper trailer for scrap / swing doors / alloy wheels / immediately available ---- * Manufacturer: Stas * Model: Ferrostar - Steel Tipper Trailer * First registration: - (new vehicle) * Gross weight: 36,000 kg * Unladen weight (manufacturer): 8,024 kg * Payload: 27,976 kg * Axles: 3x SAF axles / 1st axle lift axle / starting aid / disc brakes * Suspension: Air suspension with raise & lower function * Tyres: 385/65 R 22.5 on Speedline Diamond alloy rims * Volume: approx. 55m³ (10.15m length x 2.33m width x 2.29m height) * Colour: Chassis RAL 9005, Body RAL 9005, Sliding cover SIO 7999 * EBS * Swing door (split 1/2 to 1/2) with additional pneumatic locking * Full surround rubber seal for swing door * 1x slide in the right-hand door * Tipper entry front left inside * Aluminium platform at the front with left-side access * Central clamping system for tarp securing * 2 roof bows (1 mid, 1 rear) * Aluminium sheet for tarp protection * Coupling height: 1.20m * Floor: 5mm HB450 * Side walls: 4/3mm HB450 * Front wall: 3mm HB450 * Rear wall: 3mm HB450 * Automatic lowering during tipping Njdpoxpb Ufofx Akkedc * Load gauge * Wabco Smartboard * Approx. 2.80m aluminium ladder on the right * Single mudguards * Aluminium full-load landing legs as drop legs * Shovel and broom holder on the right * 1x toolbox on the left * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights * LED taillights * Folding underrun protection * Tyre pressure monitoring (Wabco Trailerpulse) * "A" sign plate Immediately available! Purchase, rental, or rent-to-own options according to agreement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is subject to change without notice. Please contact us to verify details or clarify further questions.

Condition: used, empty load weight: 6,340 kg, overall weight: 39,000 kg, Year of construction: 2002, Equipment: ABS, STAS SA339K/ALU Year built: 2002 Ndjdpfxsvdru Aj Akkjc Axles 3 ABS Air Total weight: 39000 kg Empty weight: 6340 kg

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, Equipment: ABS, ferroSTAR 55 cbm Chassis material: Steel Chassis type: Z-chassis King pin load (national) (t): 12 Axle load (national) (t): 8 Axle track (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Loading width (mm): 2325 Internal height at the front (mm) (IHF): 2,285 Internal height at the rear (mm) (IHB): 2,285 Loading length (mm): 10149 KC-Value: 0650 Overall width (mm): 2550 Volume (m³): 55.00 Wheelbase (mm) (WB): 6,600 Overall length (mm): 11,501 Nodpfx Aezdw Ttskksdc Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: First axle with lift axle and starting assist Activation of starting assist via button in the truck (mounting of the button is not included in the scope of supply) and by pressing the brake pedal three times Option 3: Third axle with lift axle Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, and switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side, in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side, in the direction of travel Support legs: JOST MODUL type Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo Rear lights: 2 LED reversing lights, mounted at the rear, on the left and right, on the lamp carrier Position: Work lights (operated via switch) 2 LED reversing lights at the front, on the left and right, in the area of the support legs Underbody protection: Manual operation Splash guards: Underbody protection, black with STAS logo Tilting cylinder: Hyva (STAS manufacturer's choice) Tilting cylinder type: Cylinder with small casing Cylinder tilting angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Tilting cylinder stroke: 7130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Rotary coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Fenders: Domar STAS with white stripe Splash guards: Fender, Clear Pass Toolbox: On the left side, in front of the axles Aluminum extension ladder with a length of 2.8 m, mounted on the right side Position: Broom and shovel holder with 3 holders each, mounted on the chassis on the left side Load pressure gauge: Ø 100 mm - mounted at the front of the chassis Two plastic wheel chocks Locking device: Chassis - superstructure, rubber bumpers Front wall: Made of 3 mm HB450 Side wall: Made of 4/3 mm HB450 Floor: Made of 5 mm HB450 Position: Rubber pads attached under the floor crossbeams Rear wall type: Swing doors Rear wall: Made of 3 mm HB450 Number of hinges: Rear wall: 3 pairs of door hinges Design: Swing door, divided 1/2 to 1/2, with 1 piece of latch Opening of the door leaves: Right first opening Fastening of the open door leaves: Via chain Sealing: Rear wall with rubber sealing in the lower area, extending 1,000 mm to the side Additional locking: Rear wall, pneumatic

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Nsde Adxg Ejpfx Akkedc Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body Ndedoxriu Eepfx Akksc SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total length: 11,520 mm, Equipment: ABS, Very well-maintained, absolutely clean Stahl-FerroStar FSS steel tipper. Hardox tipper body HB450 Side walls 4/3mm HB 450 Approx. 55 m³ Fifth wheel height 1,150 mm SAF axles with disc brakes Lift axle Alcoa DB aluminum rims Wing doors with grain slide Njdpjz Id Ayofx Akksdc Roll-up tarpaulin Platform Aluminum side supports Smart Board Loading pressure gauge Storage box Ladder 2 air vibrators etc. Further information available upon request.

Condition: used, axle configuration: 3 axles, color: grey, Year of construction: 2008, Equipment: ABS, Empty weight: 6.800 kg Carrying capacity: 32.200 kg Ndsdjz A E Srepfx Akkec GVW: 39.000 kg

Condition: used, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,310 mm, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Nedpfx Ajwzkx Tokksdc Empty weight: 5.590 kg Carrying capacity: 33.410 kg GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: used, axle configuration: 3 axles, Year of construction: 2008, Empty weight: 4.890 kg Njdjz A Hlgepfx Akkjdc Carrying capacity: 34.110 kg GVW: 39.000 kg

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-Axle Stas S 300CX Tipping Semi-Trailer VIN: 080246 Njdjyl N N Dspfx Akkedc Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Weweler supports * WABCO Smart Board * Alcoa aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: 1=90% 2=like new 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage box * 2x Work lights * Aluminum chassis Body: * Tipping semi-trailer * Hyva tipping cylinder, max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locking * Roller cover * Standing platform at the front * Portal doors 50:50 Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Tare weight: 6,050 kg Other: * German registration * New MOT / safety inspection available upon request New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary registration / Export license plates We will gladly assist you in obtaining export license plates/short-term registration. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 47 m³, total length: 10,259 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: ABS, Equipment: * Chassis material: Aluminum Ndjdpfx Asy Dmvmskkoc * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: used, axle configuration: 3 axles, first registration: 09/2009, suspension: air, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = Ndsdszwwqrepfx Akksc - EBS - Rear doors - Air suspension = Additional information = Suspension: Air suspension Unladen weight: 6,315 kg Payload: 32,685 kg GVWR: 39,000 kg Tipping: Rear Vehicle number: Tipping semi-trailer: 16 Stas S339CX / Thermo, full aluminum / 28 m³ .: YE6S339CX90000429 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 6,315 kg Full aluminum 28 m³ No liability for printing and typographical errors, changes, prior sale and errors! = Company information = No liability for printing and typographical errors, changes, prior sale and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, maximum load weight: 32,740 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2026, next inspection (TÜV): 08/2027, loading space length: 12,697 mm, loading space width: 2,400 mm, loading space height: 2,460 mm, loading space volume: 74 m³, total length: 13,411 mm, total width: 2,550 mm, total height: 3,997 mm, Year of construction: 2026, Equipment: ABS, STAS 3-axle HardoX steel tipper, 74 m³ First registration: 08/2026 NEW VEHICLE Dimensions (L x W x H): 12,697 x 2,350/2,450 x 2,460 mm (tapered design) Unladen weight: 9,260 kg Floor: continuous 5 mm HardoX steel HB450 Front and side walls: 4/3 mm HardoX steel HB450 Foldable rear underrun protection Straight front wall, with interior access ladder Rear portal doors 50:50, pneumatic secondary release 1 x grain slide Reinforced tarpaulin roof cover HYVA tilting cylinder, Alpha type, low pressure Ndsdpfx Aez Emztskksc 2 x pneumatic vibrator JOST crank-type landing gear, full-load capacity SAF axles with large disc brakes, 430 mm 1st and 3rd axles: lifting axles WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard Lifting and lowering device Automatic tipping lowering Tires: 6 x 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the left 4 x LED reversing lights RENTING is the new BUYING; with us, full-service rental is available immediately.

Condition: used, empty load weight: 5,635 kg, overall weight: 36,000 kg, Year of construction: 2015, Equipment: ABS, STAS/ ALU/ PLANE Year of construction: 2015 2 Axles Empty weight: 5635 kg Total weight: 36000 kg ABS Njdpfjvdrtlex Akkjdc EBS

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2021, total length: 9,880 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,110 mm, color: other, Year of construction: 2021, Axle configuration Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Ndedpfx Aszxpccekkoc Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Maintenance, history and condition APK (MOT): tested until 04/2027 Damages: damaged vehicle (not roadworthy) Financial information Price: On request Identification Registration number: OX-61-DR

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, loading space volume: 70 m³, total length: 12,400 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,500 mm, color: grey, Equipment: ABS, = Additional options and accessories = - BPW axles - EBS - Rear doors - LED lights - Air suspension - Roll cover - Disc brakes = Further information = General information Year of manufacture: 2007 Registration number: OL-05-BR Axle configuration Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 7,180 kg Payload: 31,820 kg GVW: 39,000 kg Functional Dumper: Rear Condition Technical condition: very good Ndodpfxsynzw Eo Akkjc Optical condition: very good Damage: none Further information Please contact John Hesselink or Christel Hesselink for more information. = Company information = Would you like to finance this vehicle? No problem. We can quickly arrange a favorable financing lease agreement for you with a term of 12, 24, 36, 48, or 60 months. All photos and further information can be found at [website address] or contact us directly.

Condition: new, maximum load weight: 30,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,664 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 52 m³, Year of construction: 2025, Brake system: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles controlled via the EBS-E system ----Suspension: * Air suspension with lift and lower system (automatic lowering during tipping operation—can be manually locked via SmartBoard—as well as via switch on chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Starting aid is activated via button in the truck—no truck-side installation required—as well as by pressing the brake pedal three times * 2 x 7-pole and 1 x 15-pole sockets * Aspöck LED lighting * 2 LED reversing lights (controlled by reverse gear) * Each side in the area of the landing gear supports has 1 LED work light ----General Attachments: * Aluminum air tank * Weweler hand-crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox approx. 860 x 520 x 500 mm on the left side * Air gun with 16 m hose reel in the toolbox * Enclosed single plastic mudguards * 1 dust bag including mount on the right side * 3 m aluminum ladder stored on the right above the mudguards * Shovel and broom holder on the left above the mudguards * Load pressure gauge mounted at the front of the chassis * Access stairs and standing platform mounted on the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping body—rectangular—with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted inside the tipper body on the front wall, left side * Smooth inner and outer side walls * Double-walled 600 mm side wall profiles—30 mm thick—3 mm inner and 2 mm outer layer * Side wall profiles are fully welded inside, 90° corners using an angle profile between floor and side walls, allowing for full floor width utilization * Top rail, 90 mm wide * 6 mm wear-resistant aluminum floor in 110 Brinell quality * Combination double-wing rear doors—straight version with double door hinge and reinforcement profiles, each with 1 grain chute and all-round rubber seal * When opened, the doors are secured with chains, allowing the doors to lie as flat as possible against the side walls * 4-position door locking hooks at the bottom open automatically during tipping—can be pneumatically locked via valve on the frame ----Roll tarp: * Roll tarp—in RAL 9005 deep black—with three side tension straps * Trapezoidal tarp support, 150 mm high, on front wall and tailgate ----Load volume: * Load volume 51.8 m³ ----Fifth-wheel height: * Fifth-wheel height 1,150 mm ----Information: * Body and chassis painted with acrylic paint in RAL 9005 deep black * --Technically permissible gross weight of 39,000 kg-- * New vehicle without first registration with manufacturer warranty * Subject to prior sale and errors Nodjwgg Uzopfx Akkedc ----Delivery time: * Immediately available ex Egestorf

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINUM chassis, Jost axle assemblies 22.5" / off-road, 3 axles with air suspension, 9 tons per axle, 1st axle lift with starting aid and electric operation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tires size 385 / 65 R22.5 on STEEL rims, 2" kingpin screwed into a 10 mm thick plate, mechanical design of the trailer supports with single-sided operation, braking system according to E.E.G. standard, dual-line Westinghouse system, spring accumulators acting on two axles, and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air tanks, electrical system according to STVZO with 2 five-chamber lights, type Aspöck, 24-volt system, aluminum tipper body, hydraulic system manufactured by Edbro with approximately 2 m of hydraulic hose, 6 PVC fenders with rubber mud flaps, side impact protection, underrun protection, walkway on the frame, fully welded, long-life rubber sealing, spindle locks on the rear door, preparation for a soil compactor, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ACCORDING TO CUSTOMER REQUIREMENTS COLOR CAN BE FREELY CHOSEN +590¤ Delivery costs Nsdpfx Aou Dvw Ejkkjdc ?Images and offers are subject to change?

Condition: new, overall weight: 36,000 kg, loading space volume: 68 m³, Year of construction: 2026, Equipment: ABS, ferroSTAR 68 cbm Silver-grey Chassis material: Steel Chassis type: Z-chassis Nsdpfxsz Exbrj Akkjdc Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Load width (mm): 2325 Standard chassis: 110 Interior height, front (mm) (IHF): 2,460 Interior height, rear (mm) (IHB): 2,460 Load length (mm): 11744 Overall width (mm): 2550 Volume (m³): 68.00 Wheelbase (mm) (WB): 7,753 Overall length (mm): 13,128 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: 1st axle with lift axle and starting assist Starting assist activation: via button in the truck (button installation is not included in the scope of delivery) and by pressing the brake pedal three times. Option 3: 3rd axle with lift axle Brake pad wear indicator: connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, as well as switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side in the direction of travel Support winch: Type JOST MODUL Tires: Tire size 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome-plated Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo 2 LED reversing lights, rear, left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights in the front, left and right in the direction of travel, mounted in the area of the support winches Underrun protection Operation of underrun protection: manual Splash guard for underrun protection: Black with STAS logo Tilting cylinder: Hyva (STAS manufacturer choice) Type of tilting cylinder: Cylinder with small housing Tilting cylinder angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Stroke of tilting cylinder: 8130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Swivel coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Number of splash guards on the fender: 2 pieces Toolbox Aluminum extension ladder with a length of 2.8 m, mounted on the right side in the direction of travel Broom and shovel holder with 3 holders each Load pressure gauge: Ø 100 mm Two plastic chock blocks Structure: Front wall inclination (°): 20 Rear wall inclination (°): 90 Front wall made of 3 mm HB450 Side wall made of 4/3 mm HB450 Floor made of 5 mm HB450 Position of rubber pads: mounted below the floor crossbeams Rear wall type: Hinged doors Rear wall made of 3 mm HB450 Number of hinges for rear wall: 3 pairs of door hinges Design of hinged door: 1/2 to 1/2 split, with 1 piece of latch Door wings open first on the right The open door wings are secured by a chain Seal for rear wall: with rubber seal in the lower area, extending 1,000 mm to the side Additional locking mechanism for rear wall: pneumatically double-acting Operation of the additional locking mechanism: manually via control on the side of the instrument panel Steel crossbars in trapezoidal design, foldable Number and positio