Used Stas Platform Semitrailers for sale (120)

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Fedpfxsfi Nmuj Afmepp Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2012, next inspection (TÜV): 09/2025, loading space volume: 55 m³, Year of construction: 2012, Equipment: ABS, * Stas 3-axle grain tipper * Type S300CX Fpjdpfjwciu Aex Afmop * Volume approx. 55m³ * Doors * Grain pusher * Air suspension * Lift axle * Mercedes axles * Disc brakes * Alloy wheels * Wabco SmartBoard * Roll-up tarpaulin * Platform * EBS * ABS

Condition: new, maximum load weight: 30,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,664 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 52 m³, Year of construction: 2025, * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * 3 x 9 t SAF axles * Air suspension with lifting and lowering system (automatic lowering during tipping operation - can be locked manually via SmartBoard and with switch on the chassis) * 1st and 3rd axle are automatically liftable via the EBS-E system Fodpfxewgg Uze Afmepp * Drive-off aid activated via button in the truck – no truck-side installation required – as well as by pressing the brake pedal three times * Aluminum air tanks * Weweler crank landing gear * Side impact guard * Folding underrun protection with handle * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (activated by reverse gear) * 1 LED work light each on the left and right in the area of the landing gears * Speedline Diamond aluminum rims * 1 x plastic toolbox on the left, approx. 860 x 520 x 500 mm * Air blow gun with 16 m hose reel in the toolbox * Enclosed single plastic mudguards * 1 dust bag including bracket on the right * 3 m aluminum access ladder stowed on the right above the mudguards * Shovel and broom holder on the left above the mudguards * Loading pressure gauge mounted at the front of the chassis * Aluminum chassis frame * Rectangular rear-tipping aluminum body with smooth sidewalls * Hyva hydraulic ram 250 bar * Straight 4 mm aluminum front wall * Steps mounted inside the body on the left front wall * Smooth sidewalls inside and outside * Double-walled 600 mm side profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side profiles are continuously welded on the inside, 90° corners made with right-angled profiles between floor and sidewalls – allowing the entire floor width to be used * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor, 110 Brinell quality * Combined double-wing doors, straight, with double hinges and reinforcement profiles, each with one grain chute and continuous rubber seal * When doors are open, they are secured by a chain, so they lie as flat as possible against the sidewalls * Quadruple bottom door lock hooks are opened automatically during tipping – pneumatically lockable via valve on the frame * Rolling tarpaulin – RAL 9005 deep black – with 3 lateral tensioning straps * Trapezoidal tarpaulin support, 150 mm high, on the front wall and tailgate * Access and standing platform mounted at the front of the frame * Loading volume 51.8 m³ * Superstructure and chassis painted with acrylic paint in RAL 9005 deep black * --technically permissible gross weight of 39,000 kg-- * Fifth wheel height 1,150 mm * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale excepted * Available immediately from Egestorf

Condition: used, maximum load weight: 32,740 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2001, Year of construction: 2001, Equipment: ABS, * Stas S3 SA334K * Year of construction : 2001 * 3 axles * Air suspension * Tarpaulin * 2 x nozzles * Tare weight : 5.260 Kg Fpodpfxst Hirms Afmsp * : 39.000 Kg Internal number : 24A004

Condition: new, maximum load weight: 28,020 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, Year of construction: 2024, Equipment: ABS, National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Front internal height (mm) 2641 Rear internal height (mm) 2821 Overall width (mm) 2550 Overall length (mm) 14000 Steel chassis 385/65R22.5 Fpsdpfjwbxxhsx Afmjp SAF axles Brake type: SAF - SBS 2220 (Haldex) Offset (ET) 120 Option: 1st axle with traction help Activation of traction help via button in the truck (installation of button is not included in the scope of delivery) and by pressing the brake pedal three times Brake pad wear indicator not connected Tire pressure monitoring: Wabco Trailerpulse Lowering of the air suspension via Smartboard and lifting/lowering valve Pneumatic coupling head: European Palm coupling Steel rims Landing gears: Steel geared landing gears mounted at the front of the chassis, type JOST MODUL, with one-sided operation and 2 speed settings EBS control panel: Left side, behind the axles Moving floor control panel: Left side, behind the axles Toolbox: Left side, behind the axles Lighting: Aspöck Lighting type: ECOLED II Reversing lights: 2 LED reversing lights, rear, left and right, on lamp holders 2 LED reversing lights, front, left and right, on lamp holders Hydraulic coupling: Swivel coupling Hydraulic coupling - Size 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose 3,000 mm Hydraulic coupling - Position: Connection option on the front wall (additionally on the support legs) Standard Smartboard Aluminum lean-to ladder 3.80 m - right in the direction of travel Position of broom and shovel holder on the side impact protection on the left Loading pressure gauge Ø 100 mm - at the front of the chassis With two plastic wheel chocks including bracket Walking floor system: Cargo Floor Air and electrical console, centered in the direction of travel Construction Rear wall: wing doors Cover plate between floor and front wall: solid aluminum plate and PVC strips Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles: 600 mm wide - 30 mm thick Distance from lower corner profile to upper side wall on the rear: 2649 Floor system operation: radio remote control Cargofloor Control: Type CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 10 mm ribbed Aluminum moving floor end plate With additional plastic guides below the floor profiles Type of Aluminum Complete Emptying Wall Brushes for Complete Emptying Wall Stainless steel handles for easy wall movement Storage for Complete Emptying Wall: 6 wheels with bidirectional cleaning (loading floor) Aluminum Rear Wall Hinged door design: 1/2 to 1/2 split, with door crossbar Door leaf opening: Right door leaf opens first Pivoting door crossbar Door crossbar material: Aluminum Rear door locking: 1x pivoting rod per door half Number of door handles - left door leaf: 2, right door leaf: 1 per pivoting rod Opened door leaf fastening: Spring retainer with plastic protection Rear wall seal with standard rubber seal Rear wall additional locking: Pneumatic, single-acting Additional locking: Manual operation of the additional locking via the side of the dashboard Rear door crash protection: Aluminum ramp buffer across the entire width of the rear wall Tensioning gear for roll-up tarpaulin tensioning With handle, mounted on the underside/side wall of the body Sprieg type

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, stas 92m3 semi-trailer, 21-slatted moving floor ideal for waste with hydraulic adjustable sealed tailgate and closed roof for 2\3 , 3 disc axles with 3rd steerer, walkway in header, year 2005, overhauled until 31.10.2020-CONCESSIONARY INTERDRIVE SRL-PARMA Fsdpjh I Id Nsfx Afmspp

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Fpjdpfxjgcw Rms Afmep Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, maximum load weight: 32,740 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2000, Year of construction: 2000, Equipment: ABS, * Stas S 3SA 334K * Year of manufacture: 2000 * 3 axles * Air suspension * Tarpaulin * 2 x supports * Own weight: 5,260 kg * : 38,000 kg Fpjdpfxot Hirto Afmop Internal number: 23A040

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space volume: 90 m³, Equipment: ABS, National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Standard chassis 135 Technical permissible total weight 39=12 9 9 9 Walking floor trailer wheelbase (mm) 7850 Front interior height (mm) (IHF) 2641 Rear interior height (mm) (IHB) 2778 Overall width (mm) 2550 Overall length (mm) 14000 Chassis material: Steel Tire size 385/65R22.5 Chassis neck height (mm) 217 Axles: JOST Type JOST Brake - DCA-T7 Optional 1st axle with lifting axle and traction control Activation of traction control Optional 3rd axle with lifting axle Brake pad wear indicator Tire pressure monitoring: Wabco Trailerpulse Fpedpfx Afewcih Aemep ECAS air suspension with raising and lowering valve Lowering of the air suspension via smartboard and raising and lowering valve Pneumatic coupling head Weweler landing gear: steel geared landing gear, type Weweler, with leveling feet, single-sided operation, and 2 speed settings EBS control panel: left in the direction of travel Moving floor control panel: left in the direction of travel Plastic toolbox Aspöck lighting ECOLED II lighting type 2 LED reversing lights, rear, left and right in the direction of travel, on the lamp holder Position of work lights (operated via switch) 2 LED reversing lights, front, left and right Hydraulic coupling, swivel coupling, 3000 mm hose Hydraulic coupling - size 3/4 Hydraulic coupling - gender, female Hydraulic coupling, return swivel coupling Hydraulic coupling return - size 1 Hydraulic coupling return - gender, female Hydraulic coupling - position: connection option on the bulkhead Hydraulic coupling - design: standard version Positioning the hydraulics: pressure return, pressure left, return right Smartboard Air connection on the side of the dashboard Aluminum lean-to ladder, 3.80 m - right in the direction of travel Positioning of the broom and shovel holder on the side impact protection: left in the direction of travel Walking floor system: Cargo Floor Air and electrical console, centered in the direction of travel, with boom Rear wall: hinged doors Folding A-shield Cover plate between floor and bulkhead: solid aluminum plate and PVC strips Standard fifth wheel plate Built-in bulkhead profile: 3 mm - 2 mm Sidewall profile 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Distance from lower corner profile to upper sidewall on the rear: 2649 Floor system operation: Radio remote control Cargofloor Control Type CF 500 SL-C - E-CONTROL Number of floor profiles: 21.8 mm Stainless steel moving floor end plate With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes above the floor profile end caps, with aluminum wear plates above the end caps Oil temperature sensor for moving floor system Aluminum complete emptying wall Storage for complete emptying wall: 6 wheels with bidirectional cleaning Aluminum rear wall Hinged door design: 1/2 to 1/2 pitch, with door end cross member Rear door locking mechanism: 1x rotary bar per door half Rear wall seal with standard rubber seal Rear wall additional locking mechanism: pneumatic, single-acting Additional locking mechanism: manual operation via the control panel on the side of the dashboard Rear door crash protection: aluminum crash buffer across the entire width of the rear wall Tensioning gear for roll-up tarpaulin tensioning: tensioning gear with handl

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, Westinghouse two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, Edbro hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, preparation for floor vibrator, mud-tight! Fsdpfx Aou Dvw Esfmjpp FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ Transfer costs *Pictures and offers are subject to change*

Condition: used, maximum load weight: 32,740 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2000, loading space volume: 17 m³, Year of construction: 2000, Equipment: ABS, * Stas S 3SA 334K * Year of manufacture: 2000 * 3 axles * Air suspension * Tarpaulin * 2 x supports * Own weight: 5,260 kg Fpodpjt Hhtvofx Afmsp * : 38,000 kg Internal number: 23A040

Condition: new, maximum load weight: 28,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, Year of construction: 2025, Equipment: ABS, Last kingpin load national (t) 12 Axle load national (t) 8 Axle spacing (mm) 1310-1310 Saddle height (mm) 1150 Chassis width (mm) 1200 Internal height front (mm) 2641 Internal height rear (mm) 2778 Overall width (mm) 2550 Overall length (mm) 14000 Chassis steel Axles JOST Brake type JOST - DCA-T7 Offset (ET) 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck Option: 3rd axle with lift axle Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with lift and lower valve Lowering of air suspension via smartboard, as well as lift and lower valve Coupling head pneumatic European palm coupling Rims steel Landing gears Weweler as steel gearbox landing gears, type Weweler, with compensating feet, single-side operation, and 2 speed stages Operation underrun protection fixed Splash flap underrun guard across the full width of the underrun protection EBS operation on the left in the direction of travel, behind the axles Control console moving floor on the left in the direction of travel, behind the axles Toolbox on the left in the direction of travel, behind the axles Lighting manufacturer Aspöck Lighting ECOLED II 2 pcs LED reverse lights, rear left and right in direction of travel on lamp carrier Position work lights (operated via switch): 2 pcs LED reverse lights front left and right Hydraulic coupling rotary coupling Hydraulic coupling - size 3/4" Hydraulic coupling - gender female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position connection possibility at the front wall (additionally with connection possibility at the landing legs) Standard smartboard Air connection on the side of the control panel Aluminium access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on left side underrun protection Two plastic wheel chocks incl. holder Moving floor system brand Cargo Floor Air and electrical console centrally in direction of travel Body Rear wall type swing doors A-frame foldable on the door, right Cover plate between floor and front wall, fixed aluminium plate and PVC strip Front wall profile 3 mm - 2 mm Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates rectangular 1500 x 1000 x 4mm Distance lower corner profile to upper side wall rear 2649 Operation floor system radio remote control Cargofloor control type CF 500 SL-C - E-CONTROL Floor profiles 21 Type floor profile 8 mm flat Moving floor end plate stainless steel With additional plastic guides underneath the floor profiles End cap reinforcement stainless steel shoes over the end caps of the floor profiles, with aluminium wear plate above the end caps Oil temperature sensor moving floor system Discharge wall Type discharge wall aluminium Storage discharge wall 6 wheels with bidirectional cleaning (cargo floor) Fjdpfxevy Rc De Afmjpp Rear wall aluminium Design swing door split 1/2 to 1/2, with door closing crossbeam Opening of the door leaf: right door leaf opens first Door closing crossbeam in pivotable design Material door closing crossbeam aluminium Locking rear doors 1x rotary bar / per door half Door leaf left 2 pcs door handles per rotary bar Door leaf right 1 pc door handle per rotary bar Fastening of opened door leaves spring retainers with plastic protection Rear wall sealing with standard rubber seal Additional rear wall lock pneumatically single-acting Operation of additional lock

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama tarpaulin 900g -10 mm floor -V-plates 2000x1500x4 -Service door on the front wall -12 pairs of lashing eyes in the front wall Chassis: Reinforced version with continuous chassis, new structure manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version Axle and suspension "disc brake 22.5" Jost axle units version, 3*9 tons with DCA - air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear system BVA, 1st axle with traction aid (without tractor unit equipment) Tires and wheels 6 wheels with tires of size 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120 Fedofi Nmpjpfx Afmspp Seat post mech. Support winches, 2x20 ton support load Braking system EBS E-system Wabco with RSS system (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear Electrical system According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear end, 24 volt system with 1*15-pin and 2*7-pin socket, with side outline lights in LED design 2 separate LED reversing lights integrated in the U-protection, Structure/trough: "structure fully welded inside" reinforced side walls Aluminum trough, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, with 2 ALU wing doors 50/30 mm thick, running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side with Kevlar ? plan seal Hydraulic system: ?Cargo ? Floor? sliding floor system Sliding floor system in the floor with hydraulically moved ALU ? profiles on ALU ? Square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU end pieces welded into the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 ALU E wheel holder, side aluminum collision protection in foldable version, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roll-up tarpaulin approx. 660gr./m2 with roll-up tarpaulin system including roll-up slats if required with side. Tension belts or with quick release, walkway on the front wall with access, 3 steel bows with locking mechanism that can be swung out and locked, aluminum protective cover with hinges that can be folded down for lighting, etc... +590¤ transfer costs Empty weight: approx. 7,700 kg Offer and images subject to change

Condition: used, maximum load weight: 32,740 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2008, Year of construction: 2008, Equipment: ABS, * Stas S 339 CX * Year of construction : 2008 * 3 axles * Air suspension Fsdpet Hhx Sofx Afmspp * Tarpaulin * 2 x nozzles * Tare weight : 4.890 Kg * : 39.000 Kg Internal number : 24A016

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, Year of construction: 2024, Equipment: ABS, Kingpin load (t) 12 Axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Wheelbase (mm) 7850 Internal height front (mm) 2641 Internal height rear (mm) 2821 Fpedpfx Afoqaaf Remep Overall width (mm) 2550 Overall length (mm) 14000 Chassis: Steel Tires 385/65R22.5 Chassis neck height (mm) 217 Axle version: Intra Brake type: SAF - SBS 2220 Option: 1st axle with traction aid Optimized traction aid Tire pressure monitoring Air suspension: Raise and lower valve Lowering of the air suspension via smartboard, as well as Lowering valve Pneumatic coupling head: European Palm coupling Steel rims Landing gears: Steel geared landing gears at the front, type JOST MODUL, with one-sided operation and 2 speed settings Fixed underrun protection control Black mud flaps for underrun protection with STAS logo, across the entire width of the underrun protection EBS control panel: Left side, behind the axles Moving floor control panel: Left side, behind the axles Plastic toolbox Lighting type: ECOLED II Reversing lights: 2 LED reversing lights, rear left and right Work lights: 2 LED reversing lights, front left and right, in the area of the landing gear Hydraulic coupling: Female swivel coupling, 3000 mm hose Hydraulic coupling - Position: Connection option on the front wall Smartboard Aluminum lean-to ladder 3.80 m Position Broom and shovel holder on the side impact protection, left in the direction of travel. Loading pressure gauge Ø 100 mm - at the front of the chassis. With two plastic wheel chocks including bracket. Cargo Floor moving floor system. Air and electrical console, centered in the direction of travel, with boom. One-piece protective plate for the lighting unit. Construction Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type: wing doors. Cover plate between floor and front wall: solid aluminum plate and PVC strips. Standard fifth wheel plate. Front wall profile: 3 mm - 2 mm. Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick. Distance between lower corner profile and upper side wall on the rear: 2649. Floor system operation: radio remote control. Cargofloor Control type CF 500 SL-C. E-CONTROL Number of floor profiles: 21 Floor profile type: 10 mm ribbed Aluminum sliding floor end plate With additional plastic guides below the floor profiles Aluminum complete emptying wall Brushes for complete emptying wall Stainless steel handle for complete emptying wall for easy wall movement Storage for complete emptying wall: 6 wheels with bidirectional cleaning (loading floor) Aluminum rear wall Hinged door design: 1/2 to 1/2 split, with door cross member Door leaf opening: Right door leaf opens first Pivoting door cross member Rear door locking: 1x espagnolette per door half Rear wall seal: Standard rubber seal Rear wall additional locking: Pneumatic, single-acting Additional locking: Manual operation of the additional locking system via the side of the dashboard Rear door crash protection: Aluminum bumper Tensioning gear for Roll-up tarpaulin tensioning mechanism with handle, mounted on the underside/side wall of the body. Type: Steel bow, straight, foldable. Number and position of bows: 2 center bows (centered, evenly spaced) and 1 rear bow (rear). Straight tarpaulin holders.

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Fpsdpfsgcw Riox Afmop manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, maximum load weight: 32,740 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2001, Year of construction: 2001, Equipment: ABS, * Stas S3 SA334K * Year of construction : 2001 * 3 axles * Air suspension * Tarpaulin Fpodpfx Aet Hinbefmop * 2 x nozzles * Tare weight : 5.260 Kg * : 39.000 Kg Internal number : 24A005

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking Fedpfx Aou Dvw Sofmepp FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fpjdofi Nmwjpfx Afmep Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: STRONG & LIGHT, now also available for heavy-duty use, from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty use, from 40m³ loading volume and 6,600kg ----Example: high-quality aluminum chassis with high-strength steel trough, Fodpfohfiqcex Afmopp REAL 7,160 KG, Chassis with 3x9t axles DCA, with 430mm disc brake, 6x steel rims, 1st axle as lift axle with starting aid, aluminum drop-lift supports (can be uncoupled when loaded), foldable underrun protection, digital loading pressure gauge as axle load indication, tool box, lean-to ladder, Trough made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, wing doors 1/2 - 1/2 with a grain slider on the right, subsequent unlocking of the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), roll-up tarpaulin with a pipe in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long cover, loading edge = 3,650mm, (some of the vehicles shown contain special equipment) ----Other equipment points and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Paintwork and equipment according to customer requirements +500¤ transfer costs ?Offers and images are subject to change ?