Used Stas Platform Semitrailers for sale (102)

Condition: used, maximum load weight: 35,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space length: 10,485 mm, loading space width: 2,474 mm, loading space height: 1,895 mm, loading space volume: 49 m³, Equipment: ABS, STAS S300CX 49 m³ In operation since 5/2021 Lifting axle ADR: EXII, FL, OX, AT Lredpfxow I Ivzj Ai Tjp Loading area: 10,485 x 2,474 x 1,895 mm Wheelbase 1,410 mm Axles 9 tonnes SAF axles Combination door Tarpaulin Disc brakes Tyres 385/65 R22.5 Condition: 1st axle 10 mm 2nd axle 11 mm 3rd axle 12 mm Spare wheel Operating weight 6,420 kg Gross weight 42,000 kg NEARLY NEW? ONLY USED FOR AGRICULTURAL PRODUCTS! More at: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALE OF TRUCKS AND CONSTRUCTION MACHINERY TRUCK SERVICE TYRE SERVICE TRUCK WASH TACHOGRAPH INSPECTION

Condition: used, axle configuration: 3 axles, first registration: 02/2005, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes Lrsdpfxjy Uly Ej Ai Tep = More information = Tyre size: 385/65 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: used, maximum load weight: 27,910 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2014, Equipment: ABS, German semi-trailer, first owner, good condition. Lredpfxjy Ubg Ie Ai Tsp STAS S 300 ZX walking floor semi-trailer, CargoFloor floor with cable remote control, SAF axles with disc brakes, first axle is a lift axle, portal doors with rotary latch + pneumatic locking, work platform, roll tarp, 1x plastic toolbox, spare wheel holder, rear step ladder, Wabco SmartBoard, air suspension with raising/lowering function, ABS, EBS, electrical connections: 1x 15-pin and 2x 7-pin, etc. Tire size: 385 / 65 R 22.5, tread depth: 14 / 14 / 13 / 11 / 8 / 6 mm Permissible total weight: 36,000 kg / Unladen weight: 8,090 kg / Payload: 27,910 kg !!! I SPEAK POLISH !!! WE SPEAK ENGLISH !!!

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. Lrodpfxsxplxzs Ai Tep INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Lrodpfeuar Amjx Ai Tsp Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Ljdpfx Asupqi Esi Tsrp Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2021, loading space volume: 92 m³, suspension: air, tire size: 385/65R22,5, color: grey, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - Alcoa Dura Bright wheels - Cargo Floor - EBS (Electronic Braking System) - Rear doors - Lift axle - LED lights - LED work lights - Alloy rims - Air suspension - Spare wheel - Sliding tarp cover - Disc brakes = Notes = Stas Walking Floor Year of manufacture: 07-2021 AS-1 Lift axle AS-3 Lift axle Alcoa Dura Bright rims Wabco Smartboard 2 stainless steel storage boxes Headboard door Spare wheel holder with spare wheel Water tank under chassis = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle make: Mercedes Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Alloy rims; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 7,890 kg Payload: 34,110 kg Gross vehicle weight: 42,000 kg Condition Technical condition: Good Optical condition: Very good Damages: None = Company Information = Want to finance this vehicle? No problem. We will swiftly arrange a favorable finance lease agreement for you with a term of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly. Lsdey Ndnqjpfx Ai Tjrp

Condition: used, empty load weight: 6,340 kg, overall weight: 39,000 kg, Year of construction: 2002, Equipment: ABS, STAS SA339K/ALU Year built: 2002 Axles 3 ABS Air Total weight: 39000 kg Lodpfovdru Aex Ai Terp Empty weight: 6340 kg

Condition: used, empty load weight: 5,635 kg, overall weight: 36,000 kg, Year of construction: 2015, Equipment: ABS, STAS/ ALU/ PLANE Year of construction: 2015 2 Axles Empty weight: 5635 kg Total weight: 36000 kg ABS Lrjdpfxsvdrtle Ai Tep EBS

Condition: used, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,310 mm, Year of construction: 2013, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Lredewzkx Topfx Ai Top Empty weight: 5.590 kg Carrying capacity: 33.410 kg GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: used, machine/vehicle number: YE6SZ339V600R0459, axle configuration: 3 axles, first registration: 07/2006, loading space length: 13,350 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, total length: 13,950 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Hydraulics = Remarks = Chassis Chassis height: 100 cm Lrsdpfxoyq R Rye Ai Tsp Height of coupling pin / drawbar: 120 cm Structure Hydraulics: ✓ Tank Fuel: ✓ Aluminium walking floor trailer, Internal dimensions 1335x247x275 cm, Volume approx 90 m3, Floor height 110 cm, Aluminium/plastic partition (manually adjustable), ABS, Air suspension, Disc brakes, Mercedes axles, Max. gross trailer weight 39000 kg, Shipment dimensions 1395x250x400 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 65%; Tyre profile right: 10% Axle 2: Tyre profile left: 75%; Tyre profile right: 15% Axle 3: Tyre profile left: 70%; Tyre profile right: 15% Weights Empty weight: 7.960 kg Carrying capacity: 31.040 kg GVW: 39.000 kg Functional Make of bodywork: Stas Height of cargo floor: 110 cm Identification Registration number: QAZ297 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Ledpjfakkcjfx Ai Tjrp Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: used, empty load weight: 11,245 kg, overall weight: 36,000 kg, Year of construction: 2009, Equipment: ABS, STAS/ALU/TIPPER Ledpjvdrt Sefx Ai Torp Year of construction: 10/2009 2 axles Total weight: 36000 kg Empty weight: 11245 kg ABS

Condition: used, axle configuration: 3 axles, first registration: 05/2001, loading space length: 8,300 mm, loading space width: 2,200 mm, loading space height: 1,400 mm, total length: 9,860 mm, total height: 2,900 mm, suspension: air, tire condition: 25 %, Year of construction: 2001, Tyre profile: 25% Brakes: disc brakes Suspension: air suspension Empty weight: 6.080 kg Carrying capacity: 31.920 kg GVW: 38.000 kg = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : Lrsdpeuzn N Iefx Ai Tsp We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. See our company video:

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, Westinghouse two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, Edbro hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, preparation for floor vibrator, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE Lodeu Dvw Eopfx Ai Terp +590¤ Transfer costs *Pictures and offers are subject to change*

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system Lsdpeyh S Aiefx Ai Tjrp according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. Lredpfxjfi Nmpe Ai Tep +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Lrodpfeu Dvw Sox Ai Tjp Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Lrodpfx Asfi Nmwji Tep Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. STRONG & LIGHT, now also available for heavy-duty applications, starting from 40 m³ loading volume and 6,600 kg. ----Example: high-quality aluminum chassis with high-strength steel body, ACTUAL 7,160 KG, Chassis with 3x9-ton axles, DCA, with 430mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting assist, aluminum drop-side supports (can be uncoupled when loaded), foldable underrun protection, digital load gauge as axle load indicator, toolbox, extension ladder, Lsdpshfiqcjfx Ai Terp Body made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, split rear doors 1/2 - 1/2 with a grain slide on the right, secondary release for the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), tarpaulin with a rod in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long sleeve, loading height = 3,650 mm, (the vehicles shown may include some special equipment) ----Further equipment details and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Painting and equipment according to customer's request +500 EUR delivery costs Offers and images are subject to change.

Condition: used, axle configuration: 3 axles, color: grey, Year of construction: 2000, Empty weight: 5.260 kg Carrying capacity: 32.740 kg Lrsdpfoyda Tdox Ai Top GVW: 38.000 kg

Condition: used, axle configuration: 3 axles, Year of construction: 2015, Equipment: ABS, Empty weight: 5.260 kg Ljdpfxsydargo Ai Tjrp Carrying capacity: 33.740 kg GVW: 39.000 kg

Condition: used, axle configuration: 3 axles, Year of construction: 2008, Empty weight: 4.890 kg Carrying capacity: 34.110 kg GVW: 39.000 kg Ledpfxoyc U Uas Ai Terp

Condition: used, axle configuration: 3 axles, Year of construction: 2001, Empty weight: 5.260 kg Carrying capacity: 33.740 kg Lrsdpjyda E Hofx Ai Tep GVW: 39.000 kg

Condition: used, axle configuration: 3 axles, Year of construction: 2000, Empty weight: 5.260 kg Lrsdpjydb R Rjfx Ai Tjp