Used Kässbohrer Agricultural Machines for sale (152)

Condition: used, maximum load weight: 28,830 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 10/2025, loading space width: 2,480 mm, loading space height: 2,800 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kässbohrer Curtain Sider Trailer, Like New, Fully Equipped * BPW axles with air suspension and disc brakes * Storage box * Spare wheel holder * Air suspension raise/lower Hodpfx Abev Arrrsuepa * Work lights * Jost landing legs * Pallet box * Tires 385/55 R22.5 - 160 K * Mileage: 107,689 km For further information, we are happy to assist you.

Condition: used, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2023, loading space volume: 60 m³, Aluminium rims Hpsdpfx Asxl Nfdobusa 5x DN450 manholes 1x DN100 Storz coupling and blanking plug for filling connection DN700 discharge cone at the rear 1" sight glass on the air reservoir

Condition: used, maximum load weight: 8,500 kg, overall weight: 13,500 kg, axle configuration: 1 axle, first registration: 10/1983, loading space length: 9,900 mm, loading space width: 2,400 mm, loading space height: 2,900 mm, total width: 2,500 mm, total height: 3,900 mm, * Kässbohrer 1 axle box trailer for 4 horses or 3 carriages with living area & cupboards * 1 large flap at the back - 1 large flap on the side - 1 small entrance door at the front plus storage compartment * Approved as a semi-trailer for animals for sporting purposes - horse transporter - * Length of loading area: 9,900 mm - Total length: 10,520 mm * Width of loading area: 2,400 mm - Total width: 2,500 mm * Inside height: approx. 2,900 mm - Total height: 3,900 mm * Permissible total weight: 8,770 kg - Empty weight: 3,750 kg - Payload: 5,020 kg * Technically OK - trailer is tight and dry - something would also need to be done visually Hodpoxglfvofx Abuspa * German vehicle - German vehicle registration document - * Please make an appointment for a viewing * Contact person: Mr. Andreas Vogel * The information provided on the Internet is non-binding description. * They do not represent guaranteed properties. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale

Condition: used, maximum load weight: 37,640 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/2014, next inspection (TÜV): 02/2026, loading space length: 9,230 mm, loading space width: 2,550 mm, loading space height: 900 mm, loading space volume: 21 m³, Equipment: ABS, * 2-line air connection * Rear support * Front landing gear * ABS Hsdpfjw Ririex Abuspa * Lift axle * SAF axles ---- Structure: Kaessbohrer LB4E EX-1 KK Lowbed semi-trailer (2,350 mm/Gooseneck + 9,230 mm/Deck), loading height approx. 900 mm, extendable width up to 3,160 mm, extendable in 12 stages to a total length of 19,575 mm / Min. deck length 12,000 mm, max. 18,000 mm., 3rd and 4th axles with trailing steering, loading ramps - ALU. Steel/wood floor, lashing rings, twistlock mounts. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see imprint) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, Year of construction: 2025, Equipment: ABS, New vehicle - Available immediately! Purchase, rental, or rent-to-own options available upon agreement. Kässbohrer 32,000 Litre V2A Bitumen Tanker Trailer / Insulated / Also for Rent! ---- * Manufacturer: Kässbohrer * Model: STS 32/1-10/24 - Bitumen Tank Semi-Trailer * First registration: - (New vehicle) * Colour: Chassis RAL 9005 Jet Black, Tank RAL 9006 White Aluminium * Volume: 32,000 litres in 1 compartment * Gross weight: 36,000 kg * Unladen weight (manufacturer): 6,400 kg * Payload: 29,600 kg * Axles: 3x BPW axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on aluminium rims * Suspension: Air suspension with raise & lower function * EBS Wabco * Tank code: L4BH * Working pressure: 2 bar * Operating temperature: 250°C * Access ladder front right with catwalk on both sides * 1x manhole cover * 4x baffle walls * 1x thermometer * 4" bottom valve at rear with right-hand manual operation * 4" shut-off butterfly valve with mechanical control * 2" side air line (aluminium) * 2" top air line with 2-way slide valve * 3" outlet line at rear Hpsdpfx Abexc A Nwsusa * 1/2" sampling tap at rear * Fire extinguisher box right and left rear (without extinguisher) * Full load support legs * Single mudguards * Toolbox rear left * Open hose tray right * Wabco Air Suspension Control Box * LED work lights * Additional LED reversing light New vehicle - Available immediately! Purchase, rental, or rent-to-own options available upon agreement. Note regarding potential errors in this listing: Despite careful preparation, errors may have occurred in the text or information provided. We accept no liability for mistakes, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/1993, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 1992, Equipment: ABS, WS Trucks GmbH: Your reliable partner for commercial vehicles Competence and service from a single source WS Trucks GmbH is your reliable partner for the purchase and sale of commercial vehicles. With over 25 years of experience, we offer you an extensive range of used and new trucks, livestock transporters, refrigerated vehicles, trailers and semi-trailers. ---- * Axles 2 * Steel frame * Edscha * Jumbo Subject to errors and prior sale ----Our service for you: * Individual advice: We take time for your needs and find the right vehicle for you. * Financing: We arrange favorable financing offers and leasing conditions for you. * Trade-in: We value your used vehicle fairly and accept it as a trade-in. * Registration & deregistration: We handle the entire registration of your new vehicle and the deregistration of your old vehicle. * Complete export processing: We take care of the entire customs processing. * Maintenance & repair: Our specialist workshop takes care of the maintenance and repair of your vehicle. Your advantage: * Competence: We are experts in commercial vehicles and know the market inside out. Hpsdpsuhuhzofx Abuea * Reliability: We keep our word and are available to help and advise you. * Service: We offer you a comprehensive service from a single source. * Quality: We only offer you high-quality vehicles from renowned manufacturers. Our core competence: Livestock and meat vehicles: * Comprehensive know-how: We know the specific requirements for livestock and meat transport and are happy to advise you on choosing the right vehicle. * Wide selection: We offer you a large selection of vehicles from different manufacturers and price ranges. * Quality: We only offer you high-quality vehicles from renowned manufacturers. * Comprehensive service: We offer you a comprehensive service from a single source, from advice and financing to maintenance and repairs. Krone Trailer Partner WS Trucks GmbH is a Krone Trailer Partner. As a Krone Trailer partner, we offer you a large selection of new and used Krone trailers. Menke-Janzen partner WS Trucks GmbH is also a partner of Menke-Janzen Fahrzeugbau. As a Menke-Janzen partner, we offer you a large selection of new and used livestock transporters. We help with the planning and implementation of your new livestock transporter from 3.5t - 40t. Further information: Website: * Telephone: * E-mail: WS Trucks GmbH: Your partner for commercial vehicles

Condition: new, maximum load weight: 35,442 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 16,550 mm, loading space width: 2,500 mm, loading space height: 1,350 mm, total width: 2,540 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer Maxima extendable telescopic heavy-duty platform semi-trailer Immediately available TECHNICAL INFORMATION: - Fifth wheel height: 1,250 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 9,100 mm - Extension: up to 7,450 mm platform extension - Extension locking position: 500 mm - Gooseneck height: 180 mm - Wheelbase: 8,130 mm - Axle spacing between 1st and 2nd axle: 1,360 mm - Axle spacing between 2nd and 3rd axle: 1,810 mm - Technical axle load capacity: 9 tonnes - Technical total axle load: 27,000 kg - Kingpin load capacity: 18,000 kg technical - Total width: 2,540 mm - Technical gross weight [80 km/h]: 45,000 kg - Technical gross weight [60 km/h]: 46,000 kg - Unladen weight ±3%: approx. 9,558 kg - Rear swing doors: 2,450 mm RUNNING GEAR: - Number of axles: 3 pieces - BPW axles with air suspension and disc brakes - The two front axles are fixed and the rear axle is steerable - Air suspension incl. 1 load gauge - Manually controlled lift axle for overloading protection (1st axle) - Wabco EBS 4S/3M braking system - Electro-pneumatic dual-circuit ABS system - Lighting system: 24V with 2 x 7-pin + 1 x 15-pin sockets - Tyres: 6 x 385/65 R 22.5 CHASSIS: - Chassis made of high-grade, high-strength S700 MC steel, according to ISO 1726 - 2 mm Omega-profile reinforced 30 mm hardwood floor - 2" kingpin with bolted connection - Mechanical telescopic landing legs at front, wind-up type, with 50 tonnes static capacity LOAD SECURING: - Lashing rings - Stake pockets - Detachable stanchions - Container locks suitable for 1x20 ft., 2x20 ft., 1x40 ft., and 1x45 ft. containers - Front wall made of steel, 1,500+500 mm high, with Code XL certification ACCESSORIES: - 1 stainless steel toolbox, dimensions: 1,000 mm x 500 mm x 500 mm (W x D x H) - Standard access ladder - Side underrun protection made of steel, according to Regulation 89/297/EEC - Stanchion box: 6 pcs, mounted to front plate - 2x2 oversize load signs with LED lighting Hpodpfslz Hliex Abuea - Rotating beacon COLOURS: - Chassis colour: RAL 3020 traffic red For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 1,210 kg, overall weight: 2,500 kg, first registration: 08/1990, loading space length: 420 mm, loading space width: 240 mm, loading space height: 230 mm, total width: 240 mm, total height: 230 mm, Dimensions: 4.20 m length, 2.40 m width, 2.30 height Unladen weight: 1,290 kg Hpjdsqw A Iujpfx Abuea Permissible total weight: 2,500 kg 28 bike racks 80 km/h approval Internal number: 9895

Condition: used, maximum load weight: 9,370 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/1994, Equipment: ABS, * 4832- Vehicle ID for telephone inquiries * Type: V 14 GL * Drum brakes, adjustable drawbar, 40 eyelet, twin tires, pneumatic suspension raising + lowering, aluminum ribbed floor * Finkel body, power generator, hydraulic floor, hydraulic. Loading ramp * Loading area: 1st floor: 16.90 m², 3rd floor: 16.65 m², 3rd floor: 16.45 m² * Usable loading height: 3x 0.95 m Hpjdpfxjqx Iile Abuea * Tires: 265/70R19.5 * 1A: 13/ 13 /9 / 9 mm * 2A: 9 /9 / 9 / 10 mm * Fifth wheel height: 0.78 m ----our email address:     our service for you:       - Procurement of short-term or customs license plates       - Transfer / delivery EU-wide       - Customs clearance of vehicles to third countries Yesli u vas yest' voprosy na russkom yazyke, vy mozhete pozvonit' po sleduyushchemu nomeru * WhatsApp just for Russian speakers: * Whatsapp for English, German and other languages:

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 24 m³, Equipment: ABS, Kässbohrer Tipper Body SKS - B 24-12 27 New! Availability: approx. 3 months after order receipt Curb weight approx. 5975 kg Tipper # Volume: 24 m³ # Tipping angle 48° # Tarpaulin on the right side # Tipper made of HB 450 wear-resistant HardoX steel # Floor made of 4 mm HB450 # Side walls and rear wall flap made of 4 mm HB450 # hyva 5-stage hydraulic rams, high pressure 250 bar Chassis & Axles # BPW axles with 22.5-inch drum brakes # Wabco EBS 4S/2M braking system with RSS # Wabco ECAS air suspension system # Wabco Smartboard # Paver brake # 6 x brand-name tires 385/65 R 22.5 on steel rims, RAL 9006 silver # 1st axle as a lift axle # Steel chassis # Foldable underrun protection # Chassis: RAL 9005 Black # Body: RAL 9005 Black # Rims: RAL 9006 Silver Others & Accessories # Aspöck 24V Lighting Hedpfxjt Um Rce Abuspa # LED Worklight Rear Left ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, Year of construction: 2025, Equipment: ABS, New vehicle – available for purchase, rental, or lease with purchase option upon request! Immediately available! Kässbohrer 32,000 Litre V2A Bitumen Tanker Trailer / Insulated / Also for Rent! ---- * Manufacturer: Kässbohrer * Model: STS 32/1-10/24 – Bitumen Tanker Trailer * First registration: – (New vehicle) * Colour: Chassis RAL 9005 Jet Black, Tank RAL 9005 Jet Black * Capacity: 32,000 litres in 1 compartment * Gross weight: 36,000 kg * Unladen weight (manufacturer's spec): 6,400 kg * Payload: 29,600 kg * Axles: 3x BPW axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on aluminium rims * Suspension: Air suspension with raise/lower function * EBS Wabco * Tank code: L4BH * Operating pressure: 2 bar * Operating temperature: 250 degrees Celsius * Access ladder front right, walkways left and right * 1x manhole cover * 4x baffle plates * 1x thermometer * 4" outlet valve at rear, manual actuation right * 4" shut-off valve with mechanical control * 2" side air line, aluminium * 2" top air line with 2-way slide valve * 3" discharge line at rear * 1/2" sample extraction tap rear * Fire extinguisher box rear right and left (without extinguisher) * Full-load supports * Individual mudguards Hpjdpfoxc A N Dex Abuea * Toolbox rear left * Open hose tray right * Wabco AirSuspension control box * LED work lights * Additional LED reversing light New vehicle – available for purchase, rental, or lease with purchase option upon request! Immediately available! Note regarding possible errors in the listing: Despite carefully preparing this advert, there may occasionally be errors in the text or details. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or if you have any further questions.

Condition: new, maximum load weight: 31,830 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 2,970 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer platform trailer Hedpfxoqafz Io Abuepa Immediately available ! * BPW axles * Disc brakes * Lift axle * Twistlocks for 1 x 40' container, 2 x 20' containers, 1 x 20' container in the middle * Heavy duty lashing eyes * Perforated outer frame * 800 mm drop sides * Transport brackets for drop sides and stanchions * Stakes with transport bracket * Stake pockets in the floor * Stainless steel storage box * Illuminated extra-wide boards * All-round warning light For further information please do not hesitate to contact us

Condition: new, maximum load weight: 31,830 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 2,970 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer platform trailer Immediately available ! * BPW axles * Disc brakes * Lift axle * Twistlocks for 1 x 40' container, 2 x 20' containers, 1 x 20' container in the middle * Heavy duty lashing eyes * Perforated outer frame * 800 mm drop sides * Transport brackets for drop sides and stanchions Hsdpfx Abei Rr Tpsuopa * Stakes with transport bracket * Stake pockets in the floor * Stainless steel storage box * Illuminated extra-wide boards * All-round warning light For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,134 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,440 mm, loading space width: 3,150 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer Extendable Low Loader K.SLA 3 / 1N - 18 / 30 Premium Heavy-Duty Trailer for Demanding Transport Tasks Available Immediately!----General Information Manufacturer: Kässbohrer * Model: K.SLA 3 / 1N - 18 / 30 * Design: Extendable Low Loader * Registration Country: Germany * Chassis Color: RAL 3020 Traffic Red * Location: Achstetten (DE) ----Dimensions & Weights * Overall length: 13,190 mm * Platform length: 9,240 mm * Extendable: +6,200 mm (up to over 19 m total length) * Width: 2,550 mm + 600 mm side extensions * Coupling height: 1,250 mm * Platform height: 875 mm * Unladen weight: approx. 11,866 kg (± 3%) * Gross vehicle weight rating: * 52,800 kg (60 km/h) * 48,000 kg (80 km/h) * Kingpin load: 18,000 kg ----Chassis & Technology * 3x BPW axles with air suspension and drum brakes Hsdpfxoxitbks Abuopa * Total axle load: 30,000 kg * 1st axle liftable (manual) * Steering: 2 rigid front axles, 1 rear trailing axle * Tyres: 245/70 R17.5 M+S & 3PMSF, incl. spare wheel holder * Rims: Steel (offset) * Load gauge ----Braking & Electrics * WABCO EBS 4S/3M, ABS, RSS (UN ECE R13) * 24V LED side marker lights, Aspöck-Nordic tail lights (ADR-compliant) * Connections: 2x 7-pin + 1x 15-pin, NATO sockets ----Body & Equipment * Frame: high-strength steel S700 MC according to ISO 1726 * Floor: 45 mm hardwood, chequer plate over wheels * Rear: 500 mm, angled at 10° * Ramps: hydraulically sliding, 2,750 x 850 mm, hardwood floor, 40 t capacity * Front wall: steel; Side and rear walls: aluminium * Toolbox (700 x 400 x 360 mm, steel) * Amber beacon, work light, reverse warning * LED warning panels, wheel chocks * Ramp lock tensioning chain & container locks (20–40 ft) ----Load Securing * Lashing rings: * 12x (10 t) * 16x (5 t) * 12x (8 t) * Stake pockets: 16 pieces (52 x 102 mm) * Container locks for various ISO sizes * Yellow reflector tape according to ECE R48 ----Special Features * High-quality, rugged heavy-duty trailer * Versatile: extendable up to over 19 m total length * Ramps suitable for construction and machinery transport * Comprehensive securing options for containers and heavy loads * Robust construction, long-lasting steel frame For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 Hpedpfxsw Nlzqe Abuea * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm Hedpfx Aow Nlyysbujpa * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! Hjdpfx Abjwmh H Ejuepa TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity Hodpfx Abot Aqv Seuspa * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 37,650 kg, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,300 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer K.SHG Multi Extendable Container Chassis TECHNICAL INFORMATION: * Total length (retracted): 9,485 mm * Wheelbase retracted P(W): 6,050 mm Hpsdpfx Asmxfp Asbuea * Overall width (W): 2,550 mm * Gooseneck (NH): 130 mm * Fifth wheel height (H5): 1,100 mm * Overall height: 3,990 mm * Axle load: 27,000 kg * Kingpin capacity: 16,000 kg * GVW (gross vehicle weight): 43,000 kg * Unladen weight: 5,353 kg * Total length F1+M2+R3 Pos.: 12,552 mm * Total length F1+M3+R2 Pos.: 12,552 mm * Total length F3+M3+R4 Pos.: 14,080 mm * Total length F2+M3+R4 Pos.: 13,964 mm CHASSIS AND RUNNING GEAR: * Chassis made of high-quality, high-strength S700 MC * KTL-coated chassis * BPW axles with air suspension and disc brakes * 1st axle liftable, automatically controlled via EBS * Tyres: 385/55 R22.5 * Jost landing legs OTHER FEATURES: * 5x2 container locks * Suitable for transporting 1x20 ft (at rear), 2x20 ft, 1x30 ft, 1x40 ft ISO, 1x40 ft HC, 1x45 ft HC ST, 1x45 ft HC LT, and 1x13.60 CB (with special permit) * Wabco brake system * 1x plastic toolbox * 2 rear mounted warning signs in accordance with UN ECE R70 regulations * Partial metallization * Chassis color: MB7350 Nova Grey For further information, we are happy to assist you.

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle Hpjdpfx Ajw Ii A Aobuoa LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Technical Specifications: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 Hedou Tarpjpfx Abuspa * Manufacturer: Kässbohrer * Type: Extendable low-bed trailer with recessed wheel wells, suitable for transporting vehicles and heavy machinery. Dimensions * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Total width: 2,550 mm (extendable by 600 mm via side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Permissible total weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tonnes per axle) * Kingpin capacity: 18,000 kg Axle Equipment * Number of axles: 3 (2 fixed front axles, 1 self-steering trailing axle at rear) * Lift axle: Manually controlled, load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Rims * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S and 3PMSF certification * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre life * Number of rims: 12 steel rims with ET120 offset Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: WABCO dual-circuit compressed-air brake system with EBS 4S/3M, ABS, and RSS (roll stability support) Lighting and Electrics * Lighting: 24V, multi-chamber lamps by ASPÖCK, side markers and LED tail lights * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² interconnecting cables (3 m length) Ramps * Ramp type: Foldable hydraulic access ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Hardwood * Safety: Ramp securing chain included Load Securing * Lashing rings: - 2 x 2 with 5,000 daN load capacity each - 1 x 2 with 10,000 daN load capacity at the gooseneck - 4 x 2 lashing rings with 6,000 daN capacity in the well area * Container lock fittings: Suitable for the transport of 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Floor covering: 45 mm hardwood decking and steel floor with embossed pattern * Wheel well bridge: Bridges made from solid hardwood with steel supports to cover the wheel recesses * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) * Partial metallization of the support surfaces Condition * New and ready for immediate use. * Perfectly suited for heavy transport, as well as for use in construction or machinery relocation.

Condition: used, maximum load weight: 28,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kässbohrer sliding tarpaulin trailers * BPW axles with air suspension and disk brakes * 1st axle liftable * 385/65R22.5 tires * Air suspension lifting/lowering * Spare wheel holder * Jost supports Hsdpfx Abjr Ivxleuspa * Pallet box * etc... For further information please do not hesitate to contact us

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer Stainless Steel Tank Semi-Trailer K.STN L 30 / 1-10/24 – 30 m³ for Organic Waste/Slurry Vehicle type: Stainless steel tank semi-trailer for organic waste Model code: K.STN L 30 / 1-10/24 Manufacturer: Kässbohrer Technical Data Volume: 30.0 m³ * Unladen weight: approx. 5,985 kg (±3%) * Permissible gross weight: 39,000 kg * Total axle load: 27,000 kg (3 × 9 t) * Fifth wheel load: 12,000 kg * Operating temperature: up to 80°C * Test pressure: 0.5 bar Dimensions * External length: 9,180 mm * Height (empty): 3,960 mm * Axle spacing (wheelbase): 5,000 mm * Rear overhang: 3,050 mm * Saddle height: 1,320 mm * Tank diameter: 2,200 mm Tank and Body Execution: Cylindrical stainless steel tank AISI 304 (1.4301) with sloped floor for residue drainage * Manhole: 1 × DN450 with hinged domed cover * Access: Aluminum walkway on the left (in front of and behind the manhole) * Access ladder on the left, manually folding safety railing * 8" flange connections at the tank outlet * 5 m hose box (large, open-top aluminum compartment), hose holders on both sides * 4" flange for cleaning line (pre-installed) * 8" pipe at the top rear for suction and discharge operations * 8" pipe with square flange front right (prepared for level gauge) * Preparation for tank ventilation, pressure and vacuum valve * Bracket for work lights * Sight glass on rear dome Discharge system and rear level regulation: Transparent 4" rigid plastic tube for external level reading * Filling funnel: 1 × 8" (plastic), top rear in front of suction pipe * Pump: Vogelsang GL260Q * Coupling: 6" Perrot coupling with hook closure on discharge pipe * Valves: * 6" manually operated brass slide valve at outlet * 4" pneumatic slide valve (cleaning pipe) * 8" pneumatic brass slide valve (tank suction line) * 4" pneumatic slide valve (tank ventilation) * Mechanical front level indicator with float and automatic pump shut-off at full load * 6" rotary joint at the rear for flexible alignment of discharge pipe (left/right/center) * T-outlet on the left with 2 × 6" pneumatic slide valves * Control box and sight glass at the discharge outlet Chassis, Axles, and Brakes Chassis: Special aluminum construction from extruded box profiles * Axles: 3 × BPW 19.5" disc brakes, trailing steering axle * Lift axle: 1st axle automatically controlled (EBS-dependent on pressure and speed) with additional switch in the tractor unit * Suspension/Brakes: Air suspension, disc brakes, EBS 4S/3M * Mechanical aluminum landing gear (24 t) * Rigid aluminum underrun protection according to UN ECE R58 Tyres and Rims Tyre size: 385/65 R 22.5 * Quantity: 6 wheels * Rims: Aluminum, matt finish * Tyre pressure monitoring system in line with R141 Electrical System and Lighting Lighting system: ASPÖCK * Work lights: 6 units (including at landing gear, under and on top of hose box, and on the tank crown) Hjdpfew N Ad Nox Abuspa * Couplings: Standard yellow/red with integrated filter * Mudguards and anti-spray flaps matching tyre size in accordance with EU regulations Extras and Safety * Underrun protection mat * 60 wheel nut caps with "K" logo (10 per wheel) * Frame bracket for pump connection * White side reflector stripes, red rear reflector stripes according to UN ECE R48 * Rear vehicle logo not included Colours Chassis: MB 7350 Novagrau (glossy) * Tank: RAL 9006 White Aluminum + coating * Axles, wheel hubs, landing gear: unpainted * End plates and hose holders: matching tank color For further information

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.STN L 30 stainless steel tank trailer 30m³ for liquid manure TECHNICAL INFORMATION: External length 9,180 mm * Height (empty vehicle) 3,960 mm * Axle distance 5,000 mm * Rear overhang 3,050 mm * Fifth wheel height 1,320 mm * Tank diameter 2,200 mm TECHNICAL DIMENSIONS: Volume 30.0 m3 * Empty weight 6,045 kg * Axle capacity is 27,000 kg * Kingpin capacity of the fifth wheel load is 12,000 kg * The operating temperature is 80°C * Test pressure (+H bar) 0.5 bar * Total weight 39,000 kg TANK: Cylindrical tank container, with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel * Number of manholes 1pc. * Manholes size DN450, 4 x nut tightening with hinged dome cover * Aluminium walkway * Access ladder on the left side of the tank * 1 x 5 M hose holder, large aluminium box open at the top * Straight flange as preparation for cleaning pipe * 1 x 8" pipe with flange at the top of the rear of the tank, for discharge by suction * 1 x 8" pipe with square flange at the front right of the tank, as preparation for a filling indicator * 6" preparation for a ventilation line * Preparation for pressure valve * Preparation for vacuum valve and vacuum DISCONNECTION SYSTEM: A transparent pipe made of hard plastic with a diameter of 4" is included at the rear in order to be able to read the level of the transported goods in the tank from the outside * 1 x 8" plastic filling funnel in front of the suction line at the top of the rear of the tank * Börger FL1036 hydraulically driven pump with carbon steel housing * When discharging with the pump, a 6" Perrot coupling with hook closure, which is used on slurry vehicles, is attached to the outlet line. * The outlet of the outlet line is equipped with 1 manually controlled 6" brass slide valve * At the inlet of the mixing line in the tank there is 1 x 4" pneumatically controlled gate valve. 1 x pneumatically controlled 8" slide valve made of brass at the inlet of the tank suction line * 1 x 6" pneumatic vent valve with brass slide * When unloading with a pump, there is a 6" swivel joint to be able to run the discharge line outlet at the rear of the vehicle from left-right-middle * 2x6" pneumatic slide valve DRIVE: Chassis is made of a special aluminum alloy that offers high quality and high strength * BPW axles 3x9 tons with air suspension and disc brakes * 1st axle can be lifted * Aluminum supports * Tires 385/65 R 22.5" * Aluminum rims * KNORR-ILVL electronic air suspension ECAS OTHER: 1 x bracket suitable for connecting a pump, welded to the frame underrun protection mat in accordance with the regulations Hpodpfjun Em Nox Abusa COLORS: Color of the chassis MB 7350 Nova gray (glossy) * Color The container RAL 9005 black Painting of the tank in BLACK The photos may show different equipment. The text of the construction description is binding!!!

Condition: used, maximum load weight: 24,855 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 1,260 mm, Equipment: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter TECHNICAL DATA: * External length: 13,200 mm * Wheelbase: 8,350 mm * Overall width: 2,550 mm * Fifth-wheel height: 1,000 mm * Axle load: 24,000 kg * Kingpin load capacity: 12,000 kg * Unladen weight ±3%: 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm * Bumper extension: 1,200 mm CHASSIS: * Fitted with BPW brand axles, 9,000 kg technical capacity, equipped with air suspension and drum brakes * Last axle self-steering * First axle liftable * Wabco braking system * 12 x 205/65 R17.5 tyres FRAME: * Made of high-strength steel * Front ramps: 2 hydraulic, zinc-plated, folding and sliding ramps, 3,800 mm long (Max. extension angle 2° to 15°), load capacity 7 t each * Middle ramps: 2 hydraulic, zinc-plated, folding ramps, 1,200 mm long (angle 0° to 44°), load capacity 7 t each * Front axle ramp: 1 hydraulic, zinc-plated, folding ramp, 4,000 mm long (angle 0° to 29°), load capacity 7 t * Loading ramps: 2 aluminium loading ramps for loading vehicles onto the truck transporter, measuring 2000 x 400 x 75 mm (L x W x H), with a capacity of 3.5 tonnes each. The ramp angle is 10° with the rear bumper closed and 8° with the bumper extended * Wheel recess: 800 x 460 x 70 mm * Vehicle extension type: 1,800 mm every 300 mm LOAD SECURING: * Lashing rings: 1 pair (8-ton capacity) on gooseneck, 2 pairs (8-ton capacity each) on the front ramps, and 2 pairs (8-ton capacity each) at the rear section OTHER: Chassis color: red For further information, please do not hesitate to contact us. Hpjdpfx Abew Nly Tsuoa