Used Drilling Rig - Vertical for sale (28)

Condition: used, Year of construction: 2013, operating hours: 8,586 h, Equipment: air conditioning, Unladen weight: 7,750 kg Ncjdpfxsx Dypks Acyol Contact Geert Geuens for further information.

Condition: used, power: 74 kW (100.61 HP), Year of construction: 1991, Engine brand: Liebherr Ncedpfx Ajxvn Edscyol Please contact J.A.J. Jansen for further information.

Condition: used, power: 19 kW (25.83 HP), Year of construction: 2015, operating hours: 1,215 h, Please contact Geert Geuens for further information. Ncsdswcbnbepfx Acyol

Condition: used, Year of construction: 1986, Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Nedpfx Acsxu A N Isyecl Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer = More information = Serial number: 606xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1996, Please provide reference number upon request: 21912 Specifications: Njdpfexz N Abox Acyscl 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder = More information = Serial number: 8xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2018, Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ncodpfx Acjwvzrgeyjl Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI = More information = Serial number: 4xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1989, Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Nsdpfx Ajw Ucm Iocyjcl Own weight: Engine hours: 5520 Model: 712HC-01 = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2014, Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Njdpjx Anansfx Acyocl Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO = More information = Serial number: 2xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Ncjdpfxjw Ragkj Acysl Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery. = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, operating hours: 810 h, Horizontal HDD drilling rig, one of the most powerful rigs in the 4-ton class. Powered by a 4-cylinder HATZ diesel engine. Pullback and thrust force: 41.5 kN each. Equipped with 26 drill rods, each approx. 2,000 mm in length, laying radius 30 m, hydraulic anchoring system. High-pressure pump from FCM, type E0413 HD, 95 liters. Pilot bore diameter: 60–110 mm. The vehicle may be covered with promotional decals and/or lettering. Our offer does not generally include a new TÜV approval. If a new TÜV approval is required, we are happy to provide a quote from our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Njdpfsv N Suaex Acyocl We are happy to provide a financing or leasing offer for this unit. Please contact us!

Condition: used, Year of construction: 2013, operating hours: 11,530 h, Equipment: all wheel drive, Internal vehicle no.: 001768 Location: Jaweed GmbH in Ober Mörlen (ZIP 61239), Hasselhecker Straße 30 * Tel.: Specification Sheet: ---- * Horizontal drilling rig * Manufacturer: Bauer * Model: BG 20 H * Year of manufacture: 2013 * Operating hours: 11,530 * Power: 201 kW / 273 HP * Weight: 57,000 kg * Length: 20,400 mm * Width: 3,000 mm * Height: 2,450 mm * Drill press table: BT KOK 200 K * Kelly bar: BK 200/368/3/21 ---- Nedpfoyawhwex Acyscl * Our machine inventory is continuously updated and always current on our website * We offer more than 200 units for sale * Our location is 30 km north of Frankfurt Airport (FRA) * We are specialists in worldwide transport & shipping * No liability is accepted for printing or typographical errors Our Services: * Export declarations * Customs declarations * Yellow temporary license plates * Red customs license plates * Purchase of your used construction machinery or commercial vehicle * Assistance with financing * Comprehensive transport solutions * Viewing of vehicles and machines * Monday - Friday from 08:00 to 16:30 * Saturdays by appointment only * Of course, you can also reach us by phone or WhatsApp with any questions ---- Jaweed GmbH Hasselhecker Straße 30 D-61239 Ober Mörlen Tel.: Mobile: This offer is non-binding and subject to prior sale. Sale always subject to our General Terms and Conditions. Input errors, mistakes, and prior sale reserved. The information provided in advertisements (online), price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability for typographical or data transmission errors. Stated equipment details are subject to separate verification. No liability is accepted for hidden defects or unlisted prior damage. Residual risk after disassembly of the vehicle. All details in the listings are non-binding and without guarantee. The description serves for general identification of the vehicle and does not constitute a warranty in the sense of sales law. ----

Condition: used, Year of construction: 2009, operating hours: 11,995 h, Equipment: all wheel drive, Internal vehicle number: 001771 Location: Jaweed GmbH in Ober Mörlen (Postal code 61239), Hasselhecker Straße 30 * Tel.: Technical data sheet: ---- * Horizontal drilling rig * Manufacturer: Delmag * Model: RH 12 * Year of manufacture: 2009 * Operating hours: 11,995 * Power: 187 kW / 254 HP Ncedpfx Acoyawhqsyel * Length: 16,950 mm * Width: 3,000 mm (2,500 mm) * Height: 3,400 mm * Weight: 47,500 kg * Drill table: BT 120 No. 4058 D * Kelly bar: K 298/3/18 ---- * Our machine inventory is constantly changing and always up to date on our website. * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/M airport. * We are specialists in worldwide transport & shipping. * We accept no liability for printing or typographical errors. Our Services: * Export declarations * Customs declarations * Yellow short-term license plates * Red customs license plates * Purchase of your used construction machine or commercial vehicle * We are also happy to help with financing * We offer complete transport solutions Vehicle and machine inspection: * Monday - Friday from 08:00 - 16:30 * Saturday by appointment only * Of course, we are also happy to answer all your questions by phone or WhatsApp ---- Jaweed GmbH Hasselhecker Straße 30 D-61239 Ober Mörlen Tel.: Mobile: This offer is non-binding and subject to prior sale. Sale always in accordance with our general terms and conditions. Input errors, mistakes and prior sale reserved. The information provided in advertisements (online), price tags and images are non-binding descriptions and do not represent guaranteed properties. The seller assumes no liability for typing or data transmission errors. Listed features must be inspected separately where applicable. No liability is assumed for hidden defects or unlisted prior damage. Residual risk after disassembly of the vehicle. All information in the listings is non-binding and without guarantee. The description serves the general identification of the vehicle and does not constitute a warranty in terms of sales law. ----.

Condition: new, fuel tank capacity: 1,500 l, Year of construction: 2026, ALTRO-Tec GmbH provides you with the right vacuum suction system for every application! M-VAC 1500 l / 1.5 m³ - 1.5 m³ hot-dip galvanized tank - Fully galvanized 2.7-ton chassis - Lid for easy access to the tank - Tank can be discharged by switching the compressor - Compact, highly maneuverable vehicle—ideal for urban use, parking garages, etc. - Suitable accessories for various applications available - Suction depths of up to 6 meters possible - 3600 l/min air handling capacity - Various drive options: petrol, diesel, electric Application examples: - Suction of heavy, sandy drilling slurries in specialist foundation engineering - Suction of liquids, including those with solids - Cleaning of channels, shafts, and pits - Emptying of portable toilets and shafts - Suction of lyes, emulsions, and wastewater - Wide selection of accessories—customer-specific paint available (special equipment) ALTRO-Tec GmbH offers a complete end-to-end service: - On-site demonstration and operator training - Repair and maintenance—rapid spare parts supply - Assistance in case of technical issues - Body variants of all kinds: Multi Car, hook-lift systems, and much more! - Custom builds/special filters—rental equipment and trade-in available delivery worldwide For technical specifications and further information, please contact us. *Custom builds and special equipment* available on request, please contact us. Delivery times and availability upon agreement. Ncedpsu Iawwjfx Acyel Images are exemplary; for current photos, please contact us at: +49 2723 717 611-0 or by email: info(ât)altro-tec.de Please note: We can only process your inquiry if you provide your name and contact details such as your telephone number or email address.

Condition: new, Year of construction: 2026, Mobile Suction System 0.5 - 14 m³ Suction Tank / Vacuum System - Mounted on subframe DIN 30722 - Steel tank with 500 - 14,000 liters capacity - Tank and subframe hot-dip galvanized - Continuous angle frame, fully welded along its length - Rated for max. 0.5 bar pressure - Rated for max. 1.0 bar vacuum - 2 liquid separators included - Safety system: dome lid, regulating valve, and safety dome with overfill valve - Mechanical level indicator with scale - 2 internal baffle plates reinforced with T-bar rings - Suction connection at the rear bottom, 4" x Ø108 Perrot coupling - Suction connection on left side, 4" x Ø108 Perrot coupling - Left and right storage boxes with lids for hoses and tools, lockable - Motor unit located between tank and front skip hook Compressor: Depending on configuration and requirements, e.g.: MECII 9000 Ballast System - Vacuum compressor with injection air cooling - Heat-resistant vanes - Crash protection system - Max. output: 9,000 liters/min - Max. pressure: 0.5 bar Ncedpfx Ajl I I Rpocyel - Max. vacuum: -0.95 bar - Continuous operation permitted at -0.6 bar - Automatic lubrication - Lubrication oil tank 2.5 liters - Oil level indicator Engine: - Briggs & Stratton Vanguard - 31 HP, 23.1 kW - Twin-cylinder V engine, 4-stroke - OHV valve control - Electric start - 12 Volt battery - V-belt drive with guard - Fully mounted on console - Enclosure for theft protection High-Pressure Cleaner: - Working pressure: 30-150 bar - Cleaning capacity: 13 l/min - With original Honda engine - Automatic high-pressure hose reel - 15 m high-pressure hose DN08 - Cleaning lance - Dirt blaster nozzle - 2 plastic tanks, 500 liters each For technical data and further information, please contact us. Worldwide delivery, dealer inquiries welcome. Special constructions and equipment available on request. Please contact us. Images are sample images, for current images please contact us at: +49 2723 717 611-0 or by email: info(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details such as your phone number or email address.

Condition: used, Year of construction: 2009, operating hours: 1 h, Equipment: all wheel drive, Internal vehicle no.: 001686 Location: Jaweed GmbH in Ober Mörlen (postal code 61239), Hasselhecker Straße 30 * Tel.: Njdpfx Ajx T I Atocyocl Whatsapp: Data sheet: ---- * Piling and pulling device * Movax SPH 80 DB * Year of construction: 2009 * Depth: 1259 mm * Width: 1130 mm * Height: 2284 mm * Weight (without adapter): 2896 kg * Centrifugal force: 700 kN * Pressure setting: 320 bar * Maximum back pressure: 5 bar * Fits 25 - 30 t excavators ----.

Condition: used, Year of construction: 2012, operating hours: 14,261 h, Equipment: all wheel drive, Internal vehicle no.: 001726 Location: Jaweed GmbH in Ober Mörlen (postcode 61239), Hasselhecker Straße 30 * Tel.: Ncedsx T I Rqjpfx Acyjl Data sheet ---- * Atlas Copco SmartRoc C50 * Year of manufacture: 2012 * Drill hole diameter: approx. 90 mm to 140 mm * Maximum drilling depth: up to 36 m * Engine power: approx. 242 kW (approx. 325 HP) * Air volume (FAD) at 12 bar: approx. 223 l/s (approx. 472 cfm) * Drilling method: so-called COPROD technology combines top-hammer technology * Drill meter-controlled control systems * GPS/Hole Navigation Systems (HNS) for guided drilling * Dust collector * Rod changer / automatic rod handling * Good condition * Air conditioning * Auxiliary heater / parking heater * Central lubrication * Radio ---- * Our fleet of machines is constantly changing and is always up to date on our website * We offer more than 200 units for sale. * Our location is 30 km north of Frankfurt Airport. * We are specialists in transport & worldwide shipping. * We assume no liability for printing or typographical errors. * Our services: * Export declarations * Customs declarations * Yellow short-term license plates * Red customs plates * Purchase of your used construction machine or commercial vehicle * We are also happy to assist with financing * We offer complete transport solutions * Inspection of vehicles and machines * Mon.-Fri. from 08:00-16:30 * Saturdays by appointment only * We are of course also available by phone or WhatsApp for any questions ---- Jaweed GmbH Hasselhecker Straße 30 D-61239 Ober Mörlen Tel.: Mobile: This offer is non-binding and subject to change. Sales are always made according to our general terms and conditions (GTC). Input errors, mistakes and prior sale excepted. The information provided in advertisements (internet), price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability for typographical or data transmission errors. Listed equipment may need to be checked separately. No liability is assumed for hidden defects or for any unlisted prior damage. Residual risk remains after dismantling of the vehicle. All information in the listings is non-binding and without guarantee. This description serves general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. ----.

Condition: used, Year of construction: 2001, operating hours: 1 h, Equipment: all wheel drive, Internal vehicle no.: 001765a Nedpfx Asx T I E Ijcyscl Location: Jaweed GmbH in Ober Mörlen (ZIP 61239), Hasselhecker Straße 30 * Tel.: Interior * Spare parts Further information * ABI * Year of construction: 2001 * First registration: 04/2021 * MRZV 600V * Year of construction: 2001 ----.

Condition: used, Year of construction: 2003, operating hours: 1 h, Equipment: all wheel drive, Internal Vehicle No.: 001420 Location: Jaweed GmbH in Ober Mörlen (Postal Code 61239), Hasselhecker Straße 30 * Tel.: Whatsapp: Data Sheet: ----* Drilling Rig * Fundex F12SE * Year of Construction: 2003 * Operating Hours: 6,200 h * Length: 27,000 mm * Width: 3,250 mm * Height: 3,700 mm * Weight: 48,000 kg * Engine Power: 129 kW ---- Machine Description: * Power Pac FPP500 / Year of Manufacture: 2011, Operating Hours: 10,795 h * Drilling Table FDE45HS / Year of Manufacture: 2011 * Belt Vibrator FVE 50 * 26 m basic boom (mast length) * 2x leader extensions (1x6 meters, 1x4 meters) * Transport weight (ballast) * Crane * Large claws * Small claws * Transport frame for claws * Cabin Ncsdpfx Ajx T Iylecyol * Elevator * 1x traverse * Drawing yoke including rotary union * 1x pallet with screws * Remote control (control panel for powerpack) ---- * Our machine inventory is constantly changing and is always up to date on our website * We are offering more than 200 units for sale * Our location is 30 km north of Frankfurt Airport (FRA) * We specialize in worldwide transport & shipping * No liability for printing or typographical errors * Our Services: * Export declarations * Customs declarations * Yellow short-term license plates * Red customs plates * Purchase of your used construction machine or commercial vehicle * We also provide assistance with financing * We offer complete transport solutions * Vehicle and machine inspection: * Mon.–Fri. from 08:00–16:30 * Saturday by appointment only * Of course, you can also reach us by phone or WhatsApp for any questions ---- Jaweed GmbH Hasselhecker Straße 30 D-61239 Ober Mörlen Tel.: Mobile: This offer is non-binding and subject to change. Sale always takes place according to our general terms and conditions. Errors in input, mistakes, and prior sale excepted. The information provided in advertisements (internet), price tags, and images are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment must be verified separately if required. Likewise, no liability is assumed for hidden defects or unlisted prior damages.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 8,500 kg, Year of construction: 2006, operating hours: 5,355 h, Perfora 100VH Row Drilling Rig Spare parts supply via Epiroc (AtlasCopco) The machine is in good, ready-to-use condition. Unfortunately, it is too large for our quarry, which is why we are selling the unit. Ncedjx Tfhgjpfx Acyjl Vertical and horizontal drilling possible. Drill rod length: 3.20 m Initial drilling depth: approx. 2.50 m Maximum drilling depth: around 9.00 m (when used with multiple drill rods) Drill rod extractor included. Hammer overhauled at 5,210 hours Hydraulic oil cooler reconditioned/new at 5,160 hours Dust extraction rotor like new at 5,280 hours Turbocharger new at 5,321 hours Alternator new at 5,290 hours Starter motor new at 5,260 hours I am happy to answer any questions you may have. Viewing by appointment only.

Condition: used, functionality: fully functional, power: 125 kW (169.95 HP), fuel type: diesel, color: white, overall weight: 7,900 kg, Year of construction: 2021, operating hours: 2,771 h, machine/vehicle number: 20-03-971, Conrad Boxer 150 with boom manipulator, approx. 140m of 82.5 mm boom, 178 mm protective pipes and further accessories. The unit is equipped with a preventer for dual-head drilling. The drilling rig was factory-fitted by Conrad with larger hydraulic motors for increased torque, as well as various other technical modifications compared to the standard unit. Delivered in 06/2021, original 2,771 operating hours. Sale price plus statutory VAT! Optionally available with a suitable truck, loading crane, and low-bed trailer. For inquiries call: 01701624120 Njdpfxsx S Nprj Acyocl

Condition: used, Year of construction: 2012, operating hours: 6,006 h, Equipment: all wheel drive, TM Bohrtechnik TMB 25 drill rig, year of manufacture: 2012, operating hours compressor: 6,006h, operating hours diesel engine: 8,718h, 6x drill rods, drill head, dust collector, ready for immediate use, good condition, German machine, On request, we can make you a leasing or financing offer from Mercedes-Benz Bank, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ Nodpferrbm Rjx Acyjcl TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, working hours kompressor: only 6.006h, working hours diesel engine: 8.718h, 6x drilling pipe, drlling head, dust collector, ready for work, good condition, german machine, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Condition: used, Year of construction: 1999, operating hours: 1,378 h, * HSB 216-P1 * Year of construction : 1999 * Boiler unit * 242 KW * Weight : 18.100 Kg * HSL 450-8 / 18HY-A-30/J Internal number: 24X018 Njdpst Hiwpefx Acyecl * Take advantage of our customized financing offers through our partner bank. * If you have any questions or other concerns, please do not hesitate to contact us.

Condition: used, Year of construction: 2013, _____used hot planting auger type PF 3501 Mann, drilling device, petrol engine, incl. 4 augers with different diameters, storage location: Ncedpfjw Ngf Rsx Acysl

Condition: used, Year of construction: 2012, Please provide reference number upon request: 21979 Specifications: - 2012 model - Hours: Owner is uncertain - Double key - Deutz Engine - Water tank - Undercarriage (see pictures) - Washer - Comes with drilling equipment, 3 hammers Ncodpfxsx Dhads Acyel - 4-10 inch holes - Services have been done myself - Ready for delivery Own weight: Model: 2012 Gemsa Brønnborerigg = More information = Serial number: 120705xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Njdexypt Depfx Acyjcl Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135 = More information = Please contact ATS Norway for more information