Used Sandvik Drilling Rig - Vertical for sale (18)

Condition: used, Year of construction: 2008, Please provide reference number upon request: 23271 Specifications: 2008 model Hours: 4,700 CAT engine Radio control Owner thinks it's a 300 hl hammer A little slack in the front of a bolt The main power switch is disconnected, just reconnect it. Tires need to be filled. Owner believes it is a pressure relief valve that needs to be replaced on the compressor Ready for delivery   Description: 2008 Sandvik DC302R drilling rig with radio control. The main power switch is disconnected. The tire must be filled once a month. Watch video. Gisdpfx Apsy Rhlcj Het Ready for delivery. Own weight: 1 Model: DC302R borerigg m/radiostyring. SE VIDEO = More information = Serial number: 108M138xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2014, Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Gisdpfx Ajx Ananop Hjt Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO = More information = Serial number: 2xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Giodpfxjw Ragks Ap Hst Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery. = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2018, Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Gisdpjwvzrgjfx Ap Hot Own weight: 11100 Model: Dino DC400RI Borerigg = More information = Serial number: 4xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2012, Please provide reference number upon request: 22926 Specifications: 2012 model NQTK wireline Deutz 6 cylinder engine (air-cooled engine) Bean pump Winch Sharebook 2000 Hanix RT1000 dump truck Mitsubishi engine on dump truck Can be supplied with an electric generator for an additional price. Gijdpfxsy Ahhue Ap Hjt Ready for delivery   Description: 2012 Sandvik DE130 core drilling rig/diamond drilling rig w/ 2000 Hanix RT1000 dump truck. It is possible to remove the rig from the dump truck. If the owner had work up in the mountains, he could remove the rig and fly it up by helicopter. The engine on the rig has been replaced and they switched to an air-cooled engine. Ready for delivery. Own weight: 1 Model: DE130 Kjerneborerigg/diamantborerigg m/ 2000 Hanix RT1000 dumper = More information = Please contact ATS Norway for more information

Year of construction: 2019, operating hours: 2,623 h, condition: used, General Information Year of manufacture: 2019 Model year: 2019 Color: Red Intended use: Construction Technical Information Power: 36 kW (49 hp) Number of cylinders: 4 Engine displacement: 2,200 cc Fuel type: Diesel Drive: Wheeled Unladen weight: 3,350 kg Functional CE marking: yes Condition Overall condition: good Technical condition: good Optical condition: good Gijdpey Iba Iefx Ap Hst

Year of construction: 2019, operating hours: 2,623 h, condition: used, General Information Year of manufacture: 2019 Model year: 2019 Color: Red Intended use: Construction Technical Information Power: 36 kW (49 hp) Number of cylinders: 4 Engine displacement: 2,200 cc Fuel type: Diesel Drive: Wheeled Unladen weight: 3,350 kg Functional CE marking: yes Condition Overall condition: good Technical condition: good Optical condition: good Giodpoy Ibazofx Ap Hst

Condition: used, Year of construction: 2019, Please provide reference number upon request: 23059 Specifications: 2019 model Operating hours: 5090 Impact hours: 1330 Total bore depth: 122862 m HL650 hammer (18 kW) GPS Central lubrication Diesel heater Water mist Gjdoy Evuuopfx Ap Hsit Remote control Winch Safety cage Undercarriage oscillation Chassis (see pictures) Service history Vacuum cleaner Compressor Ready for delivery Description: We have a 2019 Sandvik DX600R drill rig with HL650 hammer, GPS, and water mist for sale. The rig has been closely monitored for service and maintenance by the owner. Everything functions as it should and appears to be in good condition. It also has low impact hours relative to operating hours. Ready for delivery. Own weight: 1 Engine hours: 5090 Model: DX600R borerigg m/HL650 hammer, gps og wather mist = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2013, Please provide reference number upon request: 22439 Specifications: 2013 model Gjdpfx Apeyi Syye Hsit 2548 impact hours 4961 engine hours Vacuum cleaner Tires (see pictures) 37 kW 3100 kg Remote control Service and maintenance performed by certified personnel Vertical drilling Horizontal drilling Lights Ready for delivery Description: We have a 2013 Sandvik Commando DC125R drill rig for sale. The rig operates as it should, and all service and maintenance have been performed regularly. The rig is well maintained and is in weekly operation, so the hour count will increase slightly. Ready for delivery. Own weight: 3100 Engine hours: 4961 Model: Commando DC125R = More information = Serial number: 113M2285xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2006, Please provide reference number upon request: 20763 Specifications: Approx. 2006-2007 model (stated by owner) Total hours: 13,800 (can increase) Chassis (see pictures) Central grease, some manual points Comes with an extra jaw (recently replaced) Hanging sieve Tape and rolls (see pictures) Main band completely overhauled with new band and side edges Daily operations Video is attached Deutz engine (provided by owner) Ready for delivery Notes: An output psb nd is worn Gsdjwvzq Nepfx Ap Hjit Own weight: 48000 Model: Ca. 2006 Sandvik 1208 Knuser med Sandvik hengesikt. God stand! = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2016, operating hours: 7,635 h, Please provide reference number upon request: 20363 Specifications: - 2016 model - 7635 Hours - 67600 kg - Good with crushing plates again - Side conveyor - Rubber in feeder - Central lubrication - Volvo engine - 315 kW - Magnet - Feed box - New batteries - Ready for delivery Description: We have a 2016 Sandvik UJ440i crusher w/ side conveyor and magnet for sale. Maintenance and services have been taken continuously. Everything works as it should according to the owner. Errors and defects may be found. Ready for delivery Hours: 7635 Own weight: 67600 Giodpfx Apswg Rghj Hot Total Weight: 67600 Model: UJ440I = More information = Serial number: CB00xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Gedpjxypt Dsfx Ap Hjit Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135 = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 22455 Specifications: 2019 model Engine hours: approx. 6,150 (may increase) Central lubrication Webasto heater Volvo engine Good jaws OK belts OK rollers Side conveyor Gisdeykh E Ujpfx Ap Hst Serviced by owner Delivery by agreement Description:Sandvik UJ440 jaw crusher from 2019.The crusher has approximately 6,150 hours.Delivery by agreement. Own weight: 11 Model: UJ440 Grovknuser. = More information = Serial number: 1183P1xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2017, Please provide reference number upon request: 22454 Specifications: Model year: 2017 Engine hours: approx. 8,050 Crushing hours: approx. 5,200 CAT engine Hanging screen Belts in OK condition Gsdeykh D Repfx Ap Hoit Cone replaced in 2025 261 kW Remote control Services carried out by owner Delivery by agreement Description:Sandvik QH331 cone crusher from 2017.The cone was replaced in 2025.Feed hopper can be included at an additional cost.Delivery by agreement. Own weight: 11 Model: QH331 Konknuser m/ Hengesikt. = More information = Serial number: QH3310xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2018, operating hours: 9,000 h, Please provide reference number upon request: 21954 Specifications: Model year: 2018 Hours: approx. 9,000 315 kW Weight: 68,334 kg Radio remote control Jaw opening: 80–250 mm 9,000-hour service completed Undercarriage (see photos) Delivery by agreement Description:2018 Sandvik UJ440i jaw crusher.The 9,000-hour service has been completed.The fixed jaw plates have been replaced; the others are worn, but the owner has new ones available.Delivery by agreement. Hours: 9000 Own weight: 68334 Model: UJ440i kjeftknuser. SE VIDEO. = More information = Giodpex A R T Rsfx Ap Het Serial number: UJ440i-1xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2014, operating hours: 8,150 h, Please provide reference number upon request: 21953 Specifications: Giodpsx A R Twsfx Ap Hot Model year: 2014 Hours: approx. 8,400 (may increase) Weight: 48,975 kg 310 kW Cable remote control Outer mantles replaced about 1,500 hours ago (summer 2024) Undercarriage (see photos) Video available Delivery by agreement Description:2014 Sandvik UH440i spindle.Operating hours will increase as the machine is in daily use.The outer mantles were replaced approximately 1,500 hours ago. See video.Delivery by agreement. Hours: 8150 Own weight: 48975 Model: UH440i spindel. SE VIDEO. = More information = Serial number: ZS00xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2021, operating hours: 2,891 h, 2021 | Sandvik QS332 Cone | Used Crusher | 2891 hours Gsdjy D Tzijpfx Ap Hjit 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 275000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 69 inspection points 67 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the crusher, only the front conveyor is slightly damaged on the edges. Presence of oxidation on some mechanical parts at the level of the track assemblies. Caution fault code 130 during startup "Clutch critical oil pressure" and "unable to disengage". Problem starting the crushing, but it works without problems. A service has just been done on the cone and the crusher. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40714 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 2,479 h, 2018 | Sandvik QI341 | Used Crusher | 2479 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 264000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 77 inspection points 70 approved ✅ 5 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Engine and all hydraulic functions operational. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40156 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Gedjyq Nibepfx Ap Heit ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.