Used drilling equipment - vertical for sale (40)

Condition: used, Year of construction: 2004, operating hours: 2,650 h, Please provide reference number upon request: 23739 Specifications: 2004 model Hours: approximately 2,650 Weight: 16,000 kg 24V 338 kW New teeth Remote control Central lubrication Band (see pictures) Delivery by appointment   Description: 2004 Husman HL2 1417 coarse waste grinder with new teeth. It is possible to transport the machine with a hook. Delivery by appointment Ijdpfx Ahezd N Ivo Roic Hours: 2650 Own weight: 16000 = More information = Serial number: 1xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, Please provide reference number upon request: 23271 Specifications: 2008 model Hours: 4,700 CAT engine Radio control Owner thinks it's a 300 hl hammer A little slack in the front of a bolt The main power switch is disconnected, just reconnect it. Tires need to be filled. Owner believes it is a pressure relief valve that needs to be replaced on the compressor Iedpfxey Rhlce Ah Rjic Ready for delivery   Description: 2008 Sandvik DC302R drilling rig with radio control. The main power switch is disconnected. The tire must be filled once a month. Watch video. Ready for delivery. Own weight: 1 Model: DC302R borerigg m/radiostyring. SE VIDEO = More information = Serial number: 108M138xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 23059 Specifications: Iijdpfx Aey Evuueh Rec 2019 model Operating hours: 5090 Impact hours: 1330 Total bore depth: 122862 m HL650 hammer (18 kW) GPS Central lubrication Diesel heater Water mist Remote control Winch Safety cage Undercarriage oscillation Chassis (see pictures) Service history Vacuum cleaner Compressor Ready for delivery Description: We have a 2019 Sandvik DX600R drill rig with HL650 hammer, GPS, and water mist for sale. The rig has been closely monitored for service and maintenance by the owner. Everything functions as it should and appears to be in good condition. It also has low impact hours relative to operating hours. Ready for delivery. Own weight: 1 Engine hours: 5090 Model: DX600R borerigg m/HL650 hammer, gps og wather mist = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2007, Please provide reference number upon request: 22766 Specifications: 2007 model Hours: about 6,000 Hammer hours: uncertain but owner believes 2,500 2 radio transmitters Central lubrication A hydraulic rod 1838 LE hammer Overhauled hammer 4 years ago Comes with 2 books Ready for delivery in early May   Iiedpfx Ajywabioh Rsc   Description: 2007 Atlas Copco ROC D3 radio rig. The hammer was overhauled 4 years ago, but the owner says he hasn't used it much since then. Ready for delivery at the beginning of May. Own weight: 1 Model: ROC D3 radiorigg = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, operating hours: 13,741 h, 2008 | Delmag RH 18 on Sennebogen SR 25T | Used Drill | 13741 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 244000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 73 inspection points 71 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good operating Drill , with a Good running Cat engine , 📄 Want to see the full inspection, extra photos, or a video? Iiedpfszd Hbmex Ah Rjc Tip: The reference "40183 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Please provide reference number upon request: 23557 Specifications : Produced circa 1985. Hours are unknown. Motor and compressor working Deutz D4 10 engine Belt width: approx. 25 cm Width of the machine: approx. 220 cm Winch Works fine. Ready for delivery. Own weight: 1 Model: 50 borerigg Iisdpoza Sldefx Ah Roc = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 1989, Please provide reference number upon request: 22933 Specifications: Model: 1989 Mounted on wheels Length: approx. 12 meters Works as intended Ready for delivery Description: 1989 UniScreen Sorting plant.Approx. 12 meters long. Ready for delivery. Iedpfx Aoy Arx Roh Roic Own weight: 11 Model: Sorteringsverk = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2004, Please provide reference number upon request: 23524 Specifications: 2004 model Engine hours: 7735 Strike hours approx: 2750 1832 Hammer 149 kW Weight: 14100 kg Undercarriage (see pictures) Angle gauge Meter counter Straight grinder Recently serviced Remote control Central lubrication Carousel Rod changer Drill rods available for an additional cost Winch Lights Ready for delivery Iiedoy U T Tyopfx Ah Rsc Description: We have a 2004 Atlas Copco D7 Drilling Rig with a 1832 hammer, meter counter, and angle gauge for sale. Everything works as it should, but faults and deficiencies may occur since it is from 2004. The rig has been recently serviced. The hammer was repackaged about 150 hours ago. The angle gauge needs to be calibrated according to the owner. Drill rods may be included at an additional cost. Ready for delivery. Own weight: 14100 Engine hours: 7735 Model: D7-01 Borerigg m/ 1832 hammer, meterteller og vinkelmåler = More information = Serial number: AVO 04A784/8992 0029 xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2011, Please provide reference number upon request: 23532 Specifications: Model year: 2011 Engine hours: approx. 10,400 Iiedpjy U T Ttjfx Ah Rjc 168 kW 15,000 kg Undercarriage (see photos) Depth gauge works Directional instrument New slide rails Track width: approx. 33 cm Machine width: approx. 245 cm Dust collector Remote control Central lubrication system Description: 2011 Atlas Copco D7 drilling rig.Engine uses some oil Not all rods in the carousel are included; it comes with two rods.Available for delivery on short notice. Own weight: 15000 Model: D7 Borerigg = More information = Serial number: 11A1124/8992 0071xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1991, Equipment: all wheel drive, Welcome to Johanning’s Nutzfahrzeuge, your specialist for nearly-new and exclusive used vehicles. Location: 39606 Osterburg. Incoming! Viewing possible from approx. 20.04.2026. Below are some specifications regarding the ABI piling/drilling rig: - Base unit: Sennebogen ZR 20 T, year of manufacture 1991 - Attachments: ABI Mobilram 10 / 12,000, maximum usable length 9.50 m - Transport weight approx. 29 t - Earth drilling gearbox: ABI 2,250 (torque 2,250 kgm) - Augers: D 400 mm, connection: 80 mm hexagon, 4 pieces, each 2 m length - Mounting clamp for auger guidance D 400 mm with reducing bush 280 mm Additional images or videos available upon request. Johanning’s Nutzfahrzeuge – your partner for exclusive and nearly-new used vehicles. Our services – your advantages: - Trade-in of your vehicle possible (any condition) after sale - Immediate free deregistration of your vehicle - Registration service available for €150 (incl. fees and licence plates) - Short-term registrations - Viewing and test drives possible anytime by prior telephone arrangement Ijdpfx Ahoy Aik Rj Roic - Free home delivery by arrangement Subject to errors and prior sale.

Condition: used, Year of construction: 1993, Equipment: all wheel drive, Welcome to Johanning’s Commercial Vehicles, your specialist for young and exclusive used vehicles. Location: 39606 Osterburg, arriving soon! Approximately April 20, 2026, viewing will be possible. More information and pictures will follow! Iisdpjy Ha I Uefx Ah Rsc Feel free to request additional pictures or videos. Johanning’s Commercial Vehicles, your partner for exclusive and young used vehicles. Our services – your benefits: (after sale) – We can accept your vehicle in part exchange (regardless of condition) – immediate and free de-registration of your vehicle – registration service for €150 (including fees and license plate) – short-term viewing and test drives are possible at any time by prior telephone appointment – delivery to your location is possible by arrangement. Errors and prior sale excepted.

Condition: used, Please provide reference number upon request: 23397 Specifications: Iodpfx Ahjy Skqdj Roic Model: around 1988 Hours: approximately 9,100 Belt width: 25 cm Machine width: 233 cm Winch Ready for delivery   Description: Atlas Copco ROC 410 HC drilling rig Owner says he's had it since new, had only had a few hours on it when he got it. Around 1988 model. Ready for delivery. Own weight: 1 Model: ROC 410 HC borerigg = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, operating hours: 810 h, Horizontal HDD drilling rig, one of the most powerful drilling rigs in the 4-ton class, powered by a 4-cylinder HATZ diesel engine, drilling force of 41.5 kN, pull force of 41.5 kN, 26 pieces of drill rods, length approximately 2000 mm, laying radius of 30 m, hydraulic anchoring, high-pressure pump from FCM, type: E0413 HD, 95 liters, diameter of pilot bores 60-110 mm, the vehicle can be covered with advertising and/or labeled. SI86462 Our offer generally does not include a new TÜV (technical inspection) certificate. If a new TÜV certificate is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Please contact us! Ijdpfx Ajv N Suaeh Rsic

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Iodpfoy Umqlsx Ah Reic 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2012, Please provide reference number upon request: 23410 Specifications: Produced in 2012 Hours: approximately 11,200 122 kW Net weight: approx. 10,000 kg Chassis (see pictures) 280mm New tube magazine Cavotec radio Custom undercarriage with oscillation, IVA 450 mm 3-groove track shoes Nemek M-407 mast, with 7 ton lifting capacity, mounted on extended feeder bracket with 1 m telescope Nemek 260/520 kpm rotation with 2 3/8 API spindle (0-130 rpm). Transition adapter from 2 7/8%u201D API IF to 3 API Reg and further to 2 3/8 API included. DEUTZ water-cooled diesel engine type TCD 2013 O4L 2V Performance according to ISO 3046/1: 122 kW at 2000/min./25 C ambient temp. EURO Step 3. Stepless torque limitation and speed of rotation from radio control Nemek 400 kg top winch w/lowering valve and brake. Motor heater for 230 VAC 24 VDC electrical system, with 2x57Ah dry battery Monitoring with automatic stop and error indication. Electric proportionally controlled hydraulics for all drilling and boom functions, - CAN BUS Proportional regulation of feed and back pressure from radio control Hydraulically driven pump for drilling oil Brush tte 280 mm with double hydraulic key R pliers cylinder 2 pcs. liftable drill bit magazine with telescope, for 60 pcs. 76 mm drill bits, Prepared mounting for mounting VBG towbar Iijdpfoy Sr Epex Ah Rec Air reducer with outlet, 3-10 bar Odex arrester housing 305 mm Rear-mounted winch 6 tons of pulling force Water tank mounted under the right tube magazine Toolbox mounted under left hand magazine Hydraulically driven water pump 150 l/min. 90 Bar. Hydraulically powered welding machine/generator. 2 rear-mounted support legs   Own weight: 10000 Model: 407TS Borerigg = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2000, Please provide reference number upon request: 23270 Specifications: Owner believes it is a 2000 model DB 700 hammer Stroke hours: approx. 3,740 Engine hours: around 9,000 hours Full set of unused drill rods Overhauled hammer a year ago Remote control with cable Depth gauge error Recently served Winch Machine width: 240 cm Ready for delivery   Description: 2000 Tamrock 500 drilling rig with full set of new drill rods. Owner has recently serviced the machine and changed the oil and everything. The hammer was overhauled a year ago, not many hours ago. Owner has new gaskets and small parts for the machine. Own weight: 1 Model: 500 borerigg m/ full sett nye borestenger og overhalt hammer for et år siden! Ijdey Rhliopfx Ah Reic = More information = Please contact ATS Norway for more information

Condition: used, power: 27 kW (36.71 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2007, Equipment: all wheel drive, Empty weight: 2.800 kg Iedpszcnkzjfx Ah Reic

Condition: used, Year of construction: 1985, Please provide reference number upon request: 23281 Specifications: 1985 model Number of hours unknown Weight: 10,700 kg Dust collector Not used for the last 3 years Owned for approximately 10 years Winch Extra drill bits included Ready for delivery Iijdpfxoy Ri D Hs Ah Rjc Description: 1985 Tamrock DHA500 drilling rig.According to the owner, the rig has not been used for the last 3 years.Ready for delivery. Own weight: 10700 Model: DHA500 Borerigg. = More information = Serial number: 50xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1997, Please provide reference number upon request: 23207 Specifications : 2002 model. 8465 hours. 59.5 kW. Additional hydraulics. 1 dental tray. Extra tires included. Cut. Iiedpfxey Nh Nre Ah Roc Watch video. Description : Atlas 1304 with a toothed bucket and some extra tires for sale. There are few hours on the machine. There are occasional electrical faults on the machine, some warning lights come on but they disappear on their own. Ready for delivery. Own weight: 5000 Model: Commando 300 = More information = Serial number: Serial no. 97Axxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2015, Please provide reference number upon request: 21725 Specifications: 2015 model Engine hours: Approx. 5,850 Weight: 38,000 kg Dafo fire suppression system 2 booms Laser Both drill hammers and spare hammer overhauled in 2024 LED lights Radio/CD Climate control/AC Service performed as needed Rear camera not functioning Ready for delivery Boom 1: Impact hours: Approx. 575 Electric motor hours: Approx. 11,100 Iiodjxu A Hmepfx Ah Rec Total drilled length: Approx. 603,000 meters Compressor hours: Approx. 2,900 Boom 2: Impact hours: Approx. 510 Electric motor hours: Approx. 7,200 Total drilled length: Approx. 387,000 meters Compressor hours: Approx. 2,900 Own weight: 38000 Model: Boomer MC2 Tunnelborerigg. = More information = Serial number: TMG15URExxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2012, Please provide reference number upon request: 21979 Specifications: Model year: 2012 Operating hours: Owner is unsure Double key system Deutz engine Water tank Undercarriage (see photos) Washer Includes drilling equipment, 3 hammers Drilling capacity: 4–10 inch holes Service performed by owner Ready for delivery Iijdpfxox Dhado Ah Roc Own weight: 11 Model: Brønnborerigg = More information = Serial number: 120705xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2021, Please provide reference number upon request: 22668 Specifications: Isdpfjyuan Nox Ah Reic Operating hours: approx. 2000 Good undercarriage with tires Blade with trailer hitch Winch Lever controls Weight: 3034 kg Power: 40.3 kW 12 V Hatz engine Width: 1680 mm Video available Service documentation available Ready for delivery Description: A 2021 Geotech 504 is a modern, compact, and highly flexible geotechnical drilling rig with a Stage V engine and advanced functions suitable for most ground investigation methods. It is easy to transport. Own weight: 3034 Model: 504 Georigg med skjær = More information = Serial number: 2xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2014, Please provide reference number upon request: 21943 Specifications: Ijdpex Ananjfx Ah Rjic Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO = More information = Serial number: 2xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Isdoxypt Dspfx Ah Rjic Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135 = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Iedjw Ragkepfx Ah Rjic Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery. = More information = Serial number: 5xxxx Please contact ATS Norway for more information