Used Other Drilling Rig - Vertical for sale (27)

Condition: used, Year of construction: 2008, Please provide reference number upon request: 22501 Specifications: Nsdpjylt Evofx Ab Aeku Model: 2008 Engine hours: 6474 Impact hours: 2126 Power: 168 kW Weight: 15000 kg 1840HE hammer Carousel Vacuum cleaner Chassis (see pictures) Compressor Straight grinder Wire needs to be replaced Direction indicator Meter counter T38 steel T45 steel Recently serviced Recently overhauled console Radio control Spare parts Lights Webasto Ready for delivery Description: We have an Atlas Copco D7 drilling rig with a 1840HE hammer and low hours for sale. The rig has recently been serviced, and the remote control has been recently overhauled. Everything works as it should according to the owner, but faults and defects may occur. The wire needs to be replaced. Service has been performed by the owner and some by Epiroc. The rig is in functional condition and has low hours relative to its age. Ready for delivery. Own weight: 15000 Engine hours: 6474 = More information = Serial number: AVO08A1627/8992 0059 xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Nodpfxow Ragks Ab Aeku Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery. = More information = Serial number: 5xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2013, operating hours: 9,462 h, Horizontal drilling and flushing rig, Tracto Technik, Grundodrill 18 ACS * Grundodrill * Model 18 ACS * Year of manufacture: 2013 * 9,462 hours (as per meter reading) Nedpfxjym H A Re Ab Asku * Driven by 4-cylinder Cummins diesel engine with 123 kW / 167 HP * 2 speed ranges * Single cab with 1 seat * Transport dimensions (L x W x H): 6450 x 2350 x 2650 mm * Weight: 15,110 kg * Crawler chassis with 34-37 mm rubber tracks * Undercarriage length x width: 2650 x 460 mm * Rod magazine (holds 50 drill rods? Diameter: 60 mm) * 1 x drill head, see pictures * Remote control, air conditioning, locating system This description does not represent a binding offer and may contain errors. No guarantee on all information provided. Please also visit our homepage.

Condition: used, Year of construction: 2012, Please provide reference number upon request: 21979 Nsdpfxex Dhadj Ab Ajku Specifications: Model year: 2012 Operating hours: Owner is unsure Double key system Deutz engine Water tank Undercarriage (see photos) Washer Includes drilling equipment, 3 hammers Drilling capacity: 4–10 inch holes Service performed by owner Ready for delivery Own weight: 11 Model: 2012 Gemsa Brønnborerigg = More information = Serial number: 120705xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1986, Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Nkodpfx Aboxu A N Is Aou Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer = More information = Serial number: 606xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2018, Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI Borerigg = More information = Nkjdpfx Aswvzrgsb Aou Serial number: 4xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1989, Please provide reference number upon request: 21250 Specifications: Nkjdpfxow Ucm Is Ab Aeu 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: 11 Engine hours: 5520 Model: 712HC-01 = More information = Please contact ATS Norway for more information

Condition: used, functionality: fully functional, BOHLER BPI 113 VERTICAL DRILLING RIG 7,600 hours of operation Ilmeg HSL900A dust collector Good condition Available immediately Nksdpfeymzlyex Ab Aju WE EVALUATE TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, Year of construction: 2014, Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Nsdpfxex Anans Ab Ajku Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO = More information = Serial number: 2xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, operating hours: 810 h, Horizontal HDD drilling rig, one of the most powerful rigs in the 4-ton class. Powered by a 4-cylinder HATZ diesel engine. Pullback and thrust force: 41.5 kN each. Equipped with 26 drill rods, each approx. 2,000 mm in length, laying radius 30 m, hydraulic anchoring system. High-pressure pump from FCM, type E0413 HD, 95 liters. Pilot bore diameter: 60–110 mm. The vehicle may be covered with promotional decals and/or lettering. Our offer does not generally include a new TÜV approval. If a new TÜV approval is required, we are happy to provide a quote from our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Nksdpfx Aov N Suajb Asu We are happy to provide a financing or leasing offer for this unit. Please contact us!

Condition: used, Year of construction: 2008, operating hours: 16,850 h, Drilling rig Sandvik DP 1100 Year of manufacture: 2008 Hammer operating hours: 8,180 hrs Total operating hours: 16,850 hrs Enclosed cabin Rearview camera Including drill rods Nedpfsyfldkjx Ab Asku 1× drill hammer with CAT engine CE compliant Undercarriage 60-70% remaining Operating weight: 21 t

Condition: used, Year of construction: 2007, operating hours: 7,500 h, Drilling rig, drilling system on crawler chassis * Welco-Drill * Model WD 100 * Year of manufacture: 2007 * Approx. 7,500 operating hours according to the last inspection report (exact number not identifiable) * Powered by a 4-cylinder Perkins diesel engine with 97 kW / 132 HP * 2 travel speeds * Transport dimensions (L x W x H): 6,500 x 1,970 x 2,800 mm * Weight: 8,500 kg * Crawler undercarriage with steel track and 35–40 mm rubber pads * Track frame dimensions (L x W): 2,650 x 310 mm * Drilling crown rated load: 70 kN, drilling hoist: 9 kN * Pulling force: 65 kN, drill head: 10.6 kN * Last inspection report from 05/2023 incl. measurement results * Documentation available Nodoyfkplepfx Ab Asku This description does not constitute a binding offer and may contain errors. No guarantee on the accuracy of the information provided. Please also visit our homepage.

Condition: new, fuel tank capacity: 1,500 l, Year of construction: 2026, ALTRO-Tec GmbH supplies the right vacuum suction system for every application! M-VAC 1500 l / 1.5 m³ - 1.5 m³ hot-dip galvanized tank - Fully galvanized 2.7 t chassis - Lid for opening the drum - The tank can be emptied by switching the compressor - Compact, highly maneuverable vehicle—ideal for urban areas, parking garages, etc. - Suitable accessories available for various applications - Suction depths up to 6 meters possible - 3,600 liters air capacity - Various drive options: petrol, diesel, electric Application examples: - Suction of highly sandy drilling mud in specialist foundation engineering - Extraction of liquids, including those containing solids - Cleaning of channels, manholes, and pits - Emptying of portable toilets and pits - Suction of lyes, emulsions, and wastewater - Wide range of accessories—custom paint finish available (optional equipment) With ALTRO-Tec GmbH you get everything from a single source: - Demonstration and operator training on your construction site - Repair and maintenance—fast spare parts supply Nedpou Iawwjfx Ab Asku - Assistance with troubleshooting - Bodywork and superstructures of all kinds: Multi Car, hooklift system, and much more! - Custom builds / special filters—rental equipment and trade-in available delivery world wide For technical data and further information, please contact us. *Custom builds and special equipment* available on request. Please contact us. Delivery times and availability by arrangement. Images for illustration purposes only; for current photos, please contact us at: +49 (0)2723 717 611-0 or by email: anfrage(ât)altro-tec.de Please note: We can only process your inquiry if you provide your name and contact details such as your phone number or email address.

Condition: new, Year of construction: 2026, Mobile Suction System 0.5 - 14 m³ Suction Tank / Vacuum System Nedpfx Abjl I I Rps Aoku - Mounted on a subframe according to DIN 30722 - Steel tank with a capacity of 500 - 14,000 liters - Container and subframe hot-dip galvanized - Continuous angle frame, fully welded along the entire length - Designed for max. 0.5 bar pressure - Designed for max. 1.0 bar vacuum - 2 liquid separators and - Safety system: manhole cover, control valve with - Safety manhole with overflow valve - Mechanical level indicator with scale - 2 internal baffle plates reinforced with T-section rings - Suction connection at rear bottom: 4" x Ø 108 Perrot coupling - Suction connection left: 4" x Ø 108 Perrot coupling - Storage boxes left and right with lids for hoses and tools, lockable - The engine unit is installed at the front, between container and hooklift bar Compressor: Depending on version and requirement, e.g. MECII 9000 ballast system - Vacuum compressor with injection air cooling - Heat-resistant vanes - Crash protection system - Delivery rate max. 9,000 liters/minute - Max. pressure 0.5 bar - Max. vacuum -0.95 bar - Continuous operation permitted at -0.6 bar - Automatic lubrication - Lubrication oil reservoir 2.5 liters - Level indicator for lubrication Engine: - Briggs & Stratton Vanguard - 31 HP / 23.1 kW - Two-cylinder V-engine, 4-stroke - OHV valve control - Electric start - 12 volt battery - V-belt drive incl. guard - Completely mounted on a console - Enclosed as theft protection High-Pressure Cleaner: - Working pressure: 30-150 bar - Cleaning performance: 13 l/min - With original Honda engine - Automatic high-pressure hose reel - With 15m HP hose DN08 - Cleaning lance - Dirt blaster - 2 plastic tanks, each with 500 liter capacity For technical data and further information, please contact us. Delivery worldwide, dealer inquiries welcome. Custom-built and special equipment available on request—contact us! Images are sample images. For up-to-date pictures, please contact us at: +49 (0)2723 717 611-0 or by email: anfrage(at)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details such as telephone number or email address.

Condition: used, functionality: fully functional, power: 125 kW (169.95 HP), fuel type: diesel, color: white, overall weight: 7,900 kg, Year of construction: 2021, operating hours: 2,771 h, machine/vehicle number: 20-03-971, Conrad Boxer 150 with boom manipulator, approx. 140m of 82.5 mm boom, 178 mm protective pipes and further accessories. The unit is equipped with a preventer for dual-head drilling. The drilling rig was factory-fitted by Conrad with larger hydraulic motors for increased torque, as well as various other technical modifications compared to the standard unit. Delivered in 06/2021, original 2,771 operating hours. Sale price plus statutory VAT! Optionally available with a suitable truck, loading crane, and low-bed trailer. For inquiries call: 01701624120 Njdpfxjx S Npre Ab Aeku

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 8,500 kg, Year of construction: 2006, operating hours: 5,355 h, Perfora 100VH Row Drilling Rig Spare parts supply via Epiroc (AtlasCopco) The machine is in good, ready-to-use condition. Unfortunately, it is too large for our quarry, which is why we are selling the unit. Vertical and horizontal drilling possible. Drill rod length: 3.20 m Initial drilling depth: approx. 2.50 m Maximum drilling depth: around 9.00 m (when used with multiple drill rods) Drill rod extractor included. Hammer overhauled at 5,210 hours Hydraulic oil cooler reconditioned/new at 5,160 hours Nksdpfxex Tfhgs Ab Aou Dust extraction rotor like new at 5,280 hours Turbocharger new at 5,321 hours Alternator new at 5,290 hours Starter motor new at 5,260 hours I am happy to answer any questions you may have. Viewing by appointment only.

Condition: used, Year of construction: 2013, _____used hot planting auger type PF 3501 Mann, drilling device, petrol engine, incl. 4 augers with different diameters, storage location: Nsdpfx Aow Ngf Rob Asku

Condition: used, Year of construction: 2013, Please provide reference number upon request: 22439 Specifications: 2013 model 2548 impact hours 4961 engine hours Vacuum cleaner Tires (see pictures) 37 kW 3100 kg Remote control Service and maintenance performed by certified personnel Vertical drilling Horizontal drilling Lights Ready for delivery Description: We have a 2013 Sandvik Commando DC125R drill rig for sale. The rig operates as it should, and all service and maintenance have been performed regularly. The rig is well maintained and is in weekly operation, so the hour count will increase slightly. Ready for delivery. Nsdjyi Syyjpfx Ab Ajku Own weight: 3100 Engine hours: 4961 Model: Commando DC125R = More information = Serial number: 113M2285xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2011, Please provide reference number upon request: 22362 Specifications: Model year: 2011 Hours: 2,450 Weight: 3,000 kg Power: 37 kW Hydraulic stabilizers Dust collector Good tires Chains Remote control Regularly serviced and well maintained Ready for delivery Description:2011 Sandvik DC122R drill rig with only 2,450 operating hours. Nodpjyhvt Uofx Ab Aoku The machine is supplied with remote control and chains. Ready for delivery. Own weight: 3000 Model: DC122R Borerigg – 2450 timer! = More information = Serial number: 111M153xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2004, operating hours: 10,948 h, 2004 | Soilmec R620 | Used Drill | 10948 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 121000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Nsdpfx Abeygxx Ds Aeku 👷‍♂️ Inspected by an independent expert 68 inspection points 55 approved ✅ 11 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: The drill is in good working condition. You can see the full report for all of the attachments that are included with the machine. Maybe new batteries will be needed, since the machine has not worked for about 1 year. The drill was not able to be fully tested on-site. It has a variable truck frame and 4 core drills. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40269 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2019, Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Njdexypt Dspfx Ab Aeku Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135 = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2004, Please provide reference number upon request: 21885 Specifications: Nodpfx Aboxy Ex Ne Asku - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg = More information = Serial number: EKJ0043xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Nsdpjx Uzx Dofx Ab Asku

Condition: used, power: 178 kW (242.01 HP), fuel type: diesel, Year of construction: 1999, operating hours: 1,378 h, HSB 216-P1 Year of manufacture: 1999 Drilling rig 242 kW Weight: 18,100 kg Nsdpfx Abeydafgj Aeku HSL 450-8 / 18HY-A-30/J

Condition: used, Year of construction: 1999, Please contact J.A.J. Jansen for further information. Nodpfx Abjuufrfj Asku